Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
Power Transformer sold 1 piece Osaka High Wave Power Transformer Primary: 100-110V/3A Secondary: 12-18-20-24V/5A W97 × H81 × D96mm Approximately 3kg (Measured, Not Including Projection) Source Box with (Yosuke Kojima)
Accessories: original box
Power transformer primary: 100V secondary: 7.5-6.3-0-6.3-7.5V/3A (2 circuits) W90 × H121 × D90 mm approx. 3.6 kg (actual measurement, not including protrusions) There is a fine bruise (Kojima (Yosuke)
Accessories: none
Heater transformer spare sale primary: 105-115-125V secondary: 6.3V/5A (with CT) W49 × H69 × D45 mm 0.5 kg/piece (actual measurement, not including protrusions) with original box exterior, terminals It seems to be an unused item from the condition! (Kojima Yosuke)
Accessories: original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 100V secondary: 6.3V/4A, 7-6.3-5-5-6.3-7V/5A × 2 W130 × H150 × D130 mm 8.1 kg (actual measurement, not including protrusions) There are scratches in places (Yosuke Kojima)
Accessories: none
Input transformer sold 1 piece primary: 10KΩ secondary: 60 kΩ boost ratio 1:2.5 W24 x H35 mm 0.06 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Input transparent sale primary: 10 KΩ secondary: 60 kΩ boost ratio 1:2.5 W 24 x H35 mm 60 g/piece (actual measurement, not including protrusions) with white box (Kojima Yosuke)
Accessories: white box
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
Power transformer used in MQ60 vacuum tube amplifiers Primary: 100V Secondary: 360V/280mA 100V/350mA 60V/70mA CT-6.3 V/2A W104 × H97 x D87 mm approx. 4.3 kg (actual measurement, not including protrusions) (Yosuke Kojima)
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
Output transparent sale push pull output 35W primary: 8kΩ secondary: 4-8-16Ω usage: 7189 app, etc. W82 x H72 x D82 mm approx. 1.6 kg/piece (actual measurement, not including protrusions) The plate is often scratched, printing is erased a lot, and there are paint floats due to rust in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-117V secondary: 12.6V/1A, 6.3V/2A x 2, 40V/50mA, -10-0-10-130-150V/DC180mA ((VOLTAGE DOUBLER) /AC0.6A (CONTINUOUS)) W100 x H75 x D85 mm approx. 3.4 kg (actual measurement, not including protrusions) There is a lot of floating on the cover rust part (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/2/12 sales price 4,000 yen. Unspecified rosin flux core lead solder 4.0m 40% tin, 60% lead. Recommended for internal wiring of amplifiers (Kobayashi Hitoshi)
Accessories: none
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ secondary: 4-6-8 Ω W50 x H81 x D58 x 57 mm 0.86 kg (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
Output transformer sales secondary: 50-100-200Ω x 2 ※ The primary side seems to be 5 kΩ from the model number. The resistance value has been measured by the tester (between P1-P2:141.8 Ω, between P1 (P2) -B: 71.0 Ω, between 0-50 Ω: 8.2 Ω, between 0-100 Ω: 11.5 Ω, between 0-200 ohms: 16.1 Ω) W110 x H150 x D80 mm 3.6 kg/pcs (actual measurement, not including protrusions) There are fine scratches and paint peeling (Kojima Yosuke )
Accessories: none
Power transformer primary: 95-100V secondary: 250-0-250V/80mA, 780-750-600-400-0-400-600-780V/200mA W130 × H150 × D128 mm approx. 9 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 6.3V/4A, 6.3-7.5-12V/5A x 2 W105 x H120 x D105 mm approx. 5 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Since it is a custom-made product sold as an input transformer pair, the specifications are unknown, but they are described by hand. Primary: 600 Ω Secondary: 20 kΩ CT The resistance value has been measured with a tester (1-3:20.7 Ω, 2-4:20.7 Ω, 5-7:198.3 Ω, 6-8:198.8 Ω) W78 x H110 x D66 mm approximately 1.6 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none