Maintained! This time, not only does it have 1 S-shaped one, but it also comes with 2 straight pipes! EXCLUSIVE's super popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. There are small scratches, but it is a good category even when viewed from the model year (Oikawa Tetsuji)
Maintenance Information: 2024.6.9 Maintained (Replaced due to semi-fixed volume disconnection. The transistor was replaced due to rotational instability. The electrolytic capacitor has been replaced. The arm bearing was cleaned, operated, and audio-checked. Each rotation lock has been adjusted and the voltage has been adjusted. (Silicone grease attached)
Accessories: transport screws, subweights, 2 straight pipes, silicone oil
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
A high-performance integrated SACD/CD player that is the successor to the DP-550. It is a stable sound that makes you feel the thickness of the mid to low frequencies, and the spread of sound from low to high frequencies is not excessive or insufficient. The USB terminal is compatible with 384 kHz 32 bit and 11.2896 MHz 1 bit DSD. The tray button printing is missing. There is a small scratch on the side (Sasaki Shota)
Maintenance information: 2024.6.9 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: 4MDSD+ sampling frequency HS-LINK 32kHz-384kHz (PCM), 2.8224MHz, 5.6448MHz (DSD), coaxial32kHz-192kHz, optical32kHz-96kHz (PCM), USB32kHz-384kHz (PCM), 2.8224MHz, 5.6448MHz (DSD), 11.2896 MHz (DSD/ASIO only) output Level control 0 dB to -80 dB frequency characteristics 0.5-50,000 Hz dynamic range 116 dB dimensions W465 x H151 x D393 mm weight 18.8 kg
Maintained! Comes with original box. Levinson's long-selling prime amplifier. A dual monaural configuration that is thoroughly packed into one chassis while keeping the design concept of separation intact. You can be satisfied with all music genres with quality that easily surpasses separate amplifiers. You can see a feeling of use such as exterior, dullness, abrasions, scratches, etc. (Sasaki Shota.)
Maintenance information: 2024.3.3 Maintained (replace deteriorated parts. DC voltage/DC offset voltage/idling current/other inspection adjustments)
Accessories: original box, remote control, manual, power cable (non-genuine)
Main specifications: 100W+100W (8Ω) XLR input x 2 system RCA input x 3 system gain adjustable (preamp section 0/6/12 dB) W445 x H162 x D483 mm 29.5 kg
* The exterior is in pretty poor condition, so it's cheap. Balance cable, 1.5m pair, MEXCEL coated insulated 7N copper conductor, the polyurethane sheath on the outer skin deteriorates, discolors, whitening, and cracks have entered the entire line cable produced by ACROLINK, and the outer skin has peeled off, and the inner Mexel-coated shield is exposed (Kojima Yosuke)
Accessories: none
A line cable that uses high-purity oxygen-free copper (OFC) wire as a balanced cable with a 1.5m pair of core wires and shielded wires. It's a neutral sound that brings out the individuality of the amplifier or player. The exterior is dull and dirty on the plug and sheath (Kojima Yosuke)
Accessories: none
The 1.5 m pair EQB5 balance cable features a high contrast expression rich in three dimensions, and the gorgeous sound is attractive. The cable coloring is also gorgeous and unique. There is friction on the plug shell (Kojima Yosuke)
Accessories: none
Balance cable uses 1.0 m pair ultra-high purity 7N class CU and is a cable where you can enjoy an overwhelming sense of energy due to pure and dynamic transmission. There are scratches and abrasions on the plug shell (Kojima Yosuke)
Accessories: none
Speaker cable, 2.9 m pair, company Y lag/banana plug specification, 8-core structure, LGC copper conductor, 4 types of different diameter wires, has a sense of energy close to advanced models, and has excellent cost performance. Colored tape is wrapped around some sheaths (Kojima Yosuke)
Accessories: none
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustment are possible (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 10g
Pair tube, 211 equivalent tube, large triode tube, made in America, actual measured IP value: 47/47 mA (the best standard IP value for this amplifier is 50 mA) with original box ※ sound is checked with a test amplifier, plate current values have been measured, and it has been determined that operation is good (Kojima Yosuke)
Accessories: original box
Pair tube 45 Special compatible ball straight heat triode tube fishing rod type filament measurement value 90/90 (rejection value 55) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube 45 Special compatible ball straight heat triode tube fishing rod type filament measurement value 86/84 (rejected value 55) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
From exterior painting to driver gap cleaning, it has been refreshed and maintained with attention to detail! The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-mic recordings regardless of age or genre. The emblem is missing. It has a beautiful finish due to exterior maintenance (Tomoho Asaine)
Maintenance information: 2024.2.29 maintenance (exterior repair/gray paint, front and rear baffle repair/painting, horn painting, new saran net creation. Woofer maintenance (edge replacement, cone paper coating, center cap replacement) mid maintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal contact cleaning/screw replacement) tweeter maintenance (magnetic circuit gap cleaning, terminal contact cleaning/screw replacement) network maintenance (frequency characteristic check, terminal cleaning/screw replacement) (Cleaning, ATT disassembly and cleaning, internal cable extension processing).
Accessories: diffuser saran net
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Current product! First arrival at Style 35 Hi-Fi Hall with a beautiful piano black finish! The newly developed ribbon tweeter and woofer achieve high fidelity and strength with traditional diaphragms. As for the exterior condition, there are slight scratches on the side (Yamato Yuki)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box saran net
Main specifications: 2-way rear bass reflex type 85dB 4Ω W179 x H304 x D284 mm 6.8 kg
Speaker cable, 4.5 m pair, Y lug specification, varistrand structure, high purity copper, 8+8 braid structure, Teflon coating. It is a standard model of Kimber Cable that is clear, has a high SN, and has a wide sound field (Kojima Yosuke)
Accessories: none
RCA cable, 1.0 m pair, uses high-purity silver wire with VariStrand structure. KIMBER KABLE's unique “3-core blade structure” is recommended for those who want to improve sound loss anyway. The strengths and weaknesses are clear, and the presence of each instrument, especially the strings of piano, stringed instruments, etc., stretches very nicely. The spread of the mid to low range is also excellent. There is a sense of dynamism that is hard to imagine from the delicate design. There are abrasions on the tubes and plug shells (Kojima Yosuke)
Digital cable, 1.0 m, XLR plug, Teflon, air insulation, double shield, is a digital cable with strength and warmth typical of Caldas (Kojima Yosuke)
Accessories: none
The balance cable 2.0m pair Beltech Shield is also a thick, firm cable with a unique glossy sound. Since there is a lack of high frequencies and tightness in the low frequencies, the music becomes open (Kojima Yosuke)
Accessories: none
The balance cable 1.0m pair Beltech Shield is also a thick, firm cable with a unique glossy sound. Since there is a lack of high frequencies and tightness in the low frequencies, the music becomes open (Kojima Yosuke)
Accessories: none
Speaker cable 1.5 m pair end is an abnormally thin cable for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
※There are no accessories, and the black polarized rubber is missing, so it's cheap. WBT representative spade plug set of 4 High pressure fit with sandwich spade construction It has high rigidity, suppresses the generation of noise and strain in contact areas, and has a structure that can withstand large amounts of current. The plug is dull (Kojima Yosuke)
Accessories: none
Maintained! Comes with a remote control. A CD player developed to commemorate the 100th anniversary of Philips's founding. The sound is soft and relaxed, and the thickness of the analog-like mid-low range is particularly irresistible. A swing-arm CDM-4 mechanism is used for the mechanism part, and TDA1547 (DAC7) is used for the D/A conversion part to achieve advanced S/N improvements. As for the exterior, there are bald spots and stains on the SW area. MZ019204080075 (Tamura Eiji)
Maintenance information: 2024.6.9 Maintained (both tray slide belt and CD standby motor belt replaced. Other CD mechanisms, drive circuit check, reading check OK, remote control check OK)
Accessories: remote control, lock pin
Main specifications: CDM-4 mechanical DAC7 equipped analog output 2 systems (XLR/RCA) 2 digital output systems (optical/coaxial) W457 x H140 x D359 mm 16.7 kg
2023 Maintained! One of the best masterpieces of pre-main amplifiers in SANSUI history. It's powerful, with a sense of extrusion, and makes you hear a stretchy and expansive sound. The deep sinking low frequencies and the good tone unique to MOS are some of the best finished premains in SANSUI history. As for the exterior, there are scuffs and line scratches on the top plate. Serial 606068517 (Yonejima Satoshi)
Maintenance information: 2023.6.23 maintained (power supply circuit part rectifier diode replacement, transistor, resistor exchange, indicator lamp replacement, protector part transistor replacement, output relay, headphone relay replacement, power amplifier part solder repair, rec selector, power amplifier direct switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, SP terminal correction, adjustment, operation confirmation. (*There is some hardness on the SP terminal)
Accessories: instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W450 × H176 × D486mm 32.1 kg
Set of 4 Audio-Technica banana plug Insert the core wire of the cable that has been coated by about 5 mm beforehand, fold the tip back, tighten it back, and fix the cable firmly before use (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: none
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: case
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of this product, tighten the product back and fix the cable (Tamura Eiji)
Accessories: case
Line noise filters. An accessory that thoroughly eliminates transient distortion generated within line cables and improves overall signal-to-noise ratio. Sounds that could not be heard until now appear clearly, and it becomes a dynamic playback sound that stretches and stretches from low to high frequencies (Tamura Eiji)
Maintenance information: 2024.6.9 operation confirmed
Accessories: none
Main specifications: Input side: RCA jack Output side: RCA pin plug
Enacom series cable terminator. It has the effect of eliminating ringing distortion in speaker cables. The signal-to-noise ratio is increased, and quiet sound quality can be obtained. (FUJISAWA KOSHI)
Accessories: No accessories
line harmonizer. Sound quality improvement item by using 10 ferrite cores in series. It has the effect of reducing noise and improving sound quality (Tamura Eiji)
Maintenance information: 2024.6.9 operation confirmed
Accessories: case, instruction manual
1 pair of unspecified speaker terminals. The construction is solid. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
*Currently sold. DENON's small compact speaker. There are no standing corners, and the mellow sound allows you to relax and enjoy the music without getting tired. There are stains and broken dowels on the exterior and saran net, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex, anti-magnetic design, 38Hz to 45kHz, 6Ω, 89dB, W202 x H344 x D255 mm, 6.2 kg
*Currently sold. ONKYO 2-way speaker The sound quality is sharp, has a clear impression, and has a sense of stability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 operation confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex bookshelf type woofer, 12 cm, cone type tweeter, approx. 2 cm, dome type impedance, 6 ohms, maximum input, 80 W, W193 x H340 x D270 mm, 5.2 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see the exterior, mold, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. Lo-D's 3-way 3-speaker system. I have a good impression that the sound connection from the low range is good. As a domestic speaker of this era, it makes me listen to jazz in a sexy way. In addition to the exterior and paint peeling, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: 3 way 3 speakers sealed impedance 6 ohms output sound pressure level 92 dB W315 × H575 × D305 mm 13 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer system with a built-in amplifier that uses a dual drive system with a 16 cm woofer unit mounted on both the left and right sides. It is equipped with a switch between Music and Movie, and you can select the playback mode according to the Hi-Fi/Theater genre. You can see a feeling of use on the exterior, holes in the saran net, and dullness, abrasions, etc. all over (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: none
Main specifications: 1 way 2 speakers with built-in amplifier, sealed system, anti-magnetic type, 16 cm cone type x 2, playback frequency range 30 Hz to 200 Hz, high cut filter, variable in the 50 Hz to 200 Hz range, W285xH381xD347mm, 11.5 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. On the exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen, such as dullness and scuffs on the entire surface (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. Exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
A line cable that uses high-purity oxygen-free copper (OFC) wire as the balance cable 1.0 m pair core wire and shield wire. It is a neutral sound that brings out the individuality of amplifiers and players (Tomonori Asaine)
Maintenance information: 2024.6.9 continuity confirmed
Accessories: none
Digital cable 1.0 m RCA plug This 75 ohm digital cable is ideal for generating clocks such as clock generators, word clock connections for receiving devices, S/PDIF connections to DACs, audio interfaces, DJ devices, etc., and video equipment. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.6.9 continuity confirmed
Accessories: none
HS-LINK cable This is a dedicated cable for HS-LINK digital signal transmission that evolves from the 1.5m Accuphase HDL cable. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Comes with an indicator If you're an audiophile, this is a British “static electricity removal pistol” that you definitely want to have. With a mechanism that neutralizes static electricity with positive and negative ions, incidental sounds disappear, and the sound quality of analog records and CDs is improved to a clean sound with good visibility. Can be used approximately 50,000 times without using batteries (Asaine Tomo)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box, indicator
Key Specifications: Static Electricity Removal Accessory for LP/EP
*Since the video has not been checked, it is currently being sold. Multi-function AV amplifier equipped with high sound quality surround circuit D.D.S.C. Digital, uses high sound quality technology AL24 Processing Plus for all channels, and is equipped with a high image quality 1080p compatible digital video interface HDMI. The exterior is dull and there are line marks on the front panel. Serial 7041502162 (Tomonori Asaine)
Maintenance information: 2024.6.8 Operation confirmed ※The video has not been checked.
Accessories: remote control power cable
Main specifications: Equipped with a 192 kHz/24 bit compatible digital interface receiver, A/D converter, and D/A converter; Rated output: 8 ohms; 120 W x 7; size: W434 x H171 x D429 mm; weight: 18 kg
Audio-only charging eraser. This is the 3rd generation developed through repeated improvements. The charge is reduced to zero by discharging even the slightest amount of static electricity to the human body more quickly. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: original instruction manual box
Main specifications: W345 x D340 x H25 mm
A speaker system that makes it possible to reproduce sound with excellent transparency and total balance by adopting the same unit with the know-how of the advanced Ascent. The three-dimensional space radiated from AVALON's unique enclosure and the surprisingly clear sound image with high resolution are still alive and well here. Sound quality that doesn't make you aware of the presence of speakers has created a unique world. There is a feeling of use on the exterior due to small scratches, sunburn, dullness, etc. (Asaine Tomoho)
Maintenance information: 2024.6.9 sound output confirmed (good sweep test)
Accessories: instruction manual saran net jumper cable (general purpose product)
Main specifications: 2-way, 2 speakers, sealed system, floor type, unit used: bass/22cm cone type, treble/2.5cm titanium dome type Playback frequency band: 35 Hz to 24000 Hz ± 1.5 dB crossover frequency: unannounced impedance: 6 ohms output sound pressure level: 86 dB (2.83 V, 1 m) W279 x H991 x D381 mm 43 kg
Special equalizer for photoelectric cartridges. Since there is no resistance to the movement of the vibration system, more delicate playback sound can be expected than conventional cartridges. Since it is a special circuit that supplies power to LEDs, it can only be used with a dedicated equalizer. Cut off the front corner. There is a scratch on the lower part of the rear (Daiki Goto)
Maintenance information: 2024.6.8 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W325 x H96 x D21 mm 5.5 kg