Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
common needle. Compatible cartridges are ONKYO DN-201, AKAI RS-90, MarantzCT-6S, etc. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges are Victor DT-59, ONKYO DN-68ST, etc. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-72D, TRIO N-64, Mitsubishi 3D-54M AKAI RS-77, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-78D, TRIO N-64, SHARP STY-129, Marantz CTS-143, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
MM/MC phono equalizer from the handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J17346 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual, power cord, connection cord, power supply unit
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
MM/MC phono equalizer for handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. There is a scratch on the center of the wood cabinet front and a line scratch on the side. Serial 4J13104 (Fujisawa Yukishi)
Maintenance information: 2024.6.7 operation confirmed
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Replacement needle for Victor MD-1050Z, Z5P Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
VICTOR DT-51 and ST-51 compatible needles Unused, unopened Operation has not been confirmed. No warranty, sold as is (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Compatible needle for VICTOR MD-1013Z Unused, operation unconfirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: I think it is 2.5 to 3.5 g.
Victor DT-20 compatible CS-1021 and HMD-1008 compatible replacement needles Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
2.6 m speaker cable sold per cable, 98 SCMC-OFC conductors, parallel multiple stranded wire type that uses 1 pair of strands, has relatively good treble range extension in the company's speaker cable lineup, and it is a cable that matches well with the overall softness of the sound (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2023/11/8 sales price 49,800 yen ※The display panel moves when the volume etc. switch is pressed, but this is a specification. Maintained! MICROMEGA D/A CONVERTER It's a well-balanced European tune, and you can listen to chamber music and vocals smoothly. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintained (replacement of tantalum electrolytic capacitors, replacement of other capacitance electrolyzed capacitors. Various digital signal demodulation tests confirm normal operation. (Rubber foot replacement)
Accessories: none
Main specifications: 1-bit input sampling frequency 32kHz,44.1kHz,48kHz W220×H55×D110mm 1.5kg
Hamilex (Hayami Industries) glass AV rack with casters. It is also ideal for installing a flat screen LCD TV. Clear glass 12mm thick, silver pole The exterior has a feeling of use such as dullness (Yamato Yuki)
Accessories: none
Main specifications: W1050 x H538 x D45 mm 40.2 kg (actual measurement) 220 mm below 160 mm between shelves, total load capacity approx. 120 kg
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.1 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
*The stylus is a JICO VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
A network adapter that converts USB 3.0 to SFP (only compatible with 1 Gbps) SFP ports can be added to Windows PCs or laptops without wired LAN ports. There is a line scratch on the bottom. *SFP module and 5V power adapter are sold separately. (FUJISAWA KOSHI)
Accessories: original box
Key specs: https://www.oliospec.com/shop/shopdetail.html?brandcode=000000010613&search=USB-SFP&sort =
SAEC ceramic shell A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. There is a cloudy part (Daiki Goto)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g
The disposal price has been reduced! (Member discounts are not applicable) 2022/2/5 sales price 2,000 yen ※1 bottle only. The speaker stand compatible with BOSE's various surround speakers is compatible with the 3,2,1 series, AMS-series, AM series, FreeStyle, and LS series. The exterior is dull and has a feeling of use. (ASAINE Tomonori)
Accessories: none
Main specifications: W177 x H968 x D254 mm 3.1 kg
The price has been reduced! 2024/6/1 sales price 118,000 yen A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
The price has been reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
Line transformer from Uesugi Laboratory. By sandwiching it between the digital device and the amplifier, the characteristic digital noise that causes listening fatigue is removed. You can expect a change in sound quality that is familiar to the ear. It is possible to switch between 3 types of input impedances. There are scratches on the exterior. Serial 057 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: impedance compatible with 3 RCA input systems 200 ohms: 200 ohms 500 ohms: 500 ohms W175 ✕ H150 ✕ D115mm 2.5 kg
MC boost transformer loaded with transformers developed in collaboration with Tamura, for high impedance. Adopts a completely independent structure for the left and right, including the earth system. It matches Denon's DL-103, etc. The exterior has minor paint peeling and bumps. Serial 298 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 10 times W174 x H125 x D121 mm 2.5 kg
Speaker cable 1.9 m pair end banana - basic cable composed of 4 unprocessed single-wire conductors. It's a straight, extruded, and comfortable sound. There is dullness around the plug (Kojima Yosuke)
Accessories: none
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
Garrard 301 turntable seat. This mat alone changes the sound quality. Try it once! In addition to cracks on the exterior and spindle holes, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
The price has been reduced. 2021/5/6 sales price 7,000 yen turntable seat for Garrard 301. The condition is not very good, such as slight undulations and wrinkles. (KONDO HIROTSUGU)
Accessories: original case
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
※It is inexpensive because it leaves cracks in the VOL. A headphone amplifier that allows you to enjoy the sound of 2 systems: a vacuum tube and a transistor. It has a built-in USB DAC compatible with 24 bit 96 kHz, and it is a blissful item that allows you to immerse yourself in both digital and analog worlds to your heart's content. Scratches on the transformer area are slightly noticeable. Serial 12060066 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed (sound output OK, gaps remain in VOL)
Accessories: instruction manual, power cord
Main specifications: Vacuum tube using a class single headphone amplifier 6BM8 x 2 vacuum tube output 20Ω to 600Ω (45mW to 135mW) transistor output 12Ω to 300Ω (40mW to 135mW) frequency characteristics 10Hz to 50,000 Hz SNR 89dB power consumption 30W size W190 x H150 x D250 mm mass 4.7 kg
Replacement needle for TRIO/KENWOOD cartridge V-39MKIII Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for TRIO and KENWOOD V-36 cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needles for T-30 and V-30 TRIO KENWOOD cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This is a spike specification. There are wrinkles on the exterior like wrap marks. Serial 30-07-00 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg