Yamaha's top CD/SACD player at the time. The D/A section is equipped with ESS Technology's new-generation 32-bit converter, SABRE (Sabre) 32 Reference DAC (ES9018). High quality design with fully balanced transmission at all stages, thorough low impedance, and high rigidity and low resonance construction. It is a model aimed at natural reproduction that reaches straight to the heart of the listener like an instrument. The lettering on the open/close button has become thinner. Serial Y022203WX (Fujisawa Yukishi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: power cord (non-genuine), remote control, spike base
Main specifications: CD/SACD player playable disc CD/SACD/CD-R/CD-RW frequency characteristics 2 Hz to 20 kHz (CD) 2 Hz to 50 kHz (SACD) W435 x H142 x D440 mm 19.2 kg
The price has been drastically reduced! 2024/6/7 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
The price has been reduced! 2024/6/14 sales price 448,000 yen A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2016 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
The price has been drastically reduced! 2024/6/15 sales price 478,000 yen Maintained by the manufacturer! Current model of the project's belt drive player. Equipped with Ortphone's popular dynamic balance arm RS-309D. The company's commitment is packed with everything from the 9.5 kg aluminum alloy platter and selected ultra-low noise synchronous motors to neodymium magnetic floating feet. The exterior has bumps and burrs that look like bumps on the corners. A protective sheet is attached to the dust cover, but it remains as is (Fujisawa Yukishi)
Maintenance information: 2024.6.15 manufacturer maintained (belt replaced. (Platter bearing grease application, inspection of each part, operation check)
Accessories: instruction manual, stabilizer, power cord, head shell, template, needle pressure gauge, dust cover, EP adapter, gloves
Main specifications: belt drive, compatible with 33, 45, 78 rotations, RS-309D: long arm needle pressure 0 to 5 g, cartridge weight 18 to 40 g (including shell), effective length 326 mm, effective length 311 mm, overhang 15 mm, height adjustment range 42 to 55 mm, W550 x H250 x 450 mm, 22 kg
The price has been reduced! 2024/6/16 sales price 698,000 yen piano black color Equipped with a diamond tweeter common to the 800 series, network parts, and an FST mid-range similar to the higher-level models. Although it is the same size as the 804S, the specs have been greatly improved, and it can be said that it is a completely new model. It is a speaker that is delicate, has high resolution, and extremely high sound quality with a sense of SN, has a large enough space to cover everything from high volume to low volume, and can accept all kinds of music. There is a slight feeling of use, and corrosion can be seen on the spikes. Also, there is stickiness due to deterioration of the bass reflex port paint. Serial 0007167/0007168 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: instruction manual, saran net, jumper cable, rubber feet, spikes
Main specifications: 3-way, 4-speaker bass reflex system, 8 ohms, W238 x H1020 x D351 mm, 27 kg
Cabinet replaced with aurora sound, manufacturer maintained! MM/MC phono equalizer from a handmade amplifier workshop. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J13104 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 manufacturer maintained (LED left and right replacement. Replace it with a new pink color. DC offset readjustment for amplifier section, voltage check for each part. (MUTE SW readjustment, measurement and overhaul of each part.)
Accessories: instruction manual, power cord, connection cord
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Maintained by the manufacturer! Luxman CD player with a soft sound. It's easy to hear even when you listen for a long time, and you won't feel tired from listening. It is also recommended to use it in total with L-505s and L-507s of the same age. The exterior is slightly scratched and slightly torn. Serial M90110760B (Fujisawa Yukishi)
Maintenance information: 2024.6.14 manufacturer maintained (replaced due to loading belt deterioration. Tray rail, grease up. Pickup lenses, cleaning. remote control, internal cleaning, general adjustment)
Accessories: remote control, power cable
Main specifications: HDCD playback compatible analog output, 1 RCA unbalanced system, 1 XLR balance system, 1 digital output, 1 coaxial system, W467 x H144 x D396 mm, 9.5 kg
Maintained! Trilogue series subwoofers are now in stock! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. The exterior has wrinkles like wrap marks. Serial 30-07-01 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Maintained (power amplifier output elements, etc. replaced. Power board pattern break correction. Auto ON OFF doesn't work → the wiring is different, so it was fixed. Installing protective fuses. Input VR exchange. Operation check. There is no power switch, but when there is an audio signal input, the power is turned on automatically. Also, if there is no sound signal, the power will be turned off within a few minutes. When using only input ① or ②, be sure to stick the short plug into an empty terminal. (Because auto ON/OFF does not work properly), there will be some noise when the power is turned off by unplugging the outlet, so please reduce the input volume on the back. (There is no such noise when the power is turned off automatically)
Accessories: power cable, saran net, original box
Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Genuine Electri While being clear and precise, this is a powerful machine that also has the thickness and intensity of sound of successive Macintosh control amplifiers. It is a famous machine with a deep sense of nostalgia that is compatible with both vintage and modern models. Using the familiar 5-band equalizer, it is also possible to change the desired tone depending on the song. The exterior has blows, line scratches, and repair marks. Serial JHD3514 (Fujisawa Yukishi)
Maintenance information: 2018.8.30 Maintained (main volume, balance volume, etc. Contact cleaning. Switch contact cleaning. Head amplifier section and EQ volume circuit capacitor replacement. Power cord replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: built-in monitor amplifier with 5-band equalizer (20W x 2/8Ω), compatible with balanced input/output, PHONO (MM) compatible, W468 x H183 x D432 mm, 12 kg
Pioneer carbon fiber molded headshell. Simple and easy to use design. It is also attractive that it has a slightly lighter weight and is easy to combine. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber molding dead weight 9.5 g
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: No accessories
Main specifications: dead weight approx. 13g
The price has been reduced! 2024/6/15 Sales price 248,000 yen Manufacturer maintained! 20th anniversary model. It's an excellent player with excellent sharpness and high resolution. Equipped with the mechanism VMK-5! It has excellent quietness and enables accurate reading. The amount of information is also high, the sharpness is good, and you can enjoy realistic sound images. Serial 90030 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 manufacturer maintained (mechanical parts, remote control battery box replacement. Mechanical ASSY disassembly/cleaning/lubrication clamper mechanism partial disassembly/rework correction repair carried out. Turntable height adjustment implemented. Each part was inspected and operation confirmed)
Accessories: remote control, instruction manual, power cord
Main specifications: VRDS-NEO (VMK-5) equipped with Cirrus Logic 24 bit/192 kHz/CS4398 in a dual mono configuration Word sync terminal dimensions W442 x H153 x D353 mm weight 17 kg
A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is dull, and there is a feeling of use and oxidation. Serial 127176, 128196 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: No accessories
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
*Currently sold. Taket's super tweeter with a playback capacity of 150 kHz or more. The slide switch for switching the crossover was removed from the original BATPRO, fixed to the A position, and the terminals were changed. The efficiency can be switched between 5 levels with the rotary switch, creating natural overtones. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: No accessories
Main specifications: maximum rated 35 V impedance 8 ohms playback frequency band 18 kHz to 150 kHz W125 x H90 x D100 mm approx. 260 g
※There is no problem with the operation, but the AC adapter sticking is sweet. A D/A converter with a unique design. The design concept, which places emphasis on musicality over physical characteristics, is an attractive sound not found in Japan. Please enjoy the warm, thick sound quality. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: AC adapter
Main specifications: HDCD compatible, output RCA x 2, digital input optical x 1, coaxial x 1, W107 x H107 x D205 mm, 1.3 kg
Maintained! It uses a CDM-1 swing arm mechanism and is representative of analog sound CD players. The high level of expressiveness that can bring out nuance, such as singing gently and playing strongly, is still popular today. Combinations such as tube amplifiers are standard. As for the exterior, the area near the VOL knob on the left side of the front is flat. Serial 5363 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Maintained (CD mechanical pickup repair. Lens dirt, turntable motor height correction. D/A converter IC replacement. (Exchange and check coupling C in other substrates)
Accessories: power cord
Main specifications: Philips CDM-1 swing arm mechanism with 100dB signal-to-noise ratio, attached functions/program memory, TNO/INDEX search auto pause display function/track & index number song progress/time remaining before elapsed W446 x H109 x D332 mm 9 kg
Maintained! Genuine Electri Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. On the exterior, there are parts where oxidation, partial peeling, and light is leaking out. Serial JEB8913 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Maintained (MODE switch disassembly contact polishing contact grease application, installation fixed. Push switch disassembly contact cleaning contact grease application. Other volume contact cleaning. Electrolytic capacitor replacement, panel lamp replacement, panel peeling correction. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Maintained! A hit model in the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a chip on the corner of the side panel. Serial 203719 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 maintained (replaced with a custom-made product due to VR loud sound, speaker relay replaced, MUTIG push SW replaced, other INPUT selector SW, cartridge LOAD SW, TAPE selector SW, SW disassembly contact polishing grease applied, other DC bias DC balance adjustments, confirmation of sound output for each input/output terminal connection)
Accessories: No accessories
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
Full maintenance such as internal and external maintenance was carried out, and the finish was beautiful! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. Serial 55553L, 55553R (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (exterior repair/repaint) 2017.4.25 Maintained (exterior polishing/all coated woofer cone paper/unit frame paint chip putty repair grill dent correction/paint tweeter distortion and maintenance (edge deformation repair, magnetic circuit slit maintenance complete) unit detachment terminal replacement (banana plug compatible product) ATT cleaning capacitor replacement*Some capacitors before replacement Since it is difficult to remove, remove the wiring to check the remaining input/output waveform and balance, sound output check, frequency characteristic measurement check (~ 42 kHz))
Accessories: No accessories
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
Enacom series cable terminator. It has the effect of eliminating ringing distortion in speaker cables. The signal-to-noise ratio is increased, and quiet sound quality can be obtained. (FUJISAWA KOSHI)
Accessories: No accessories
RCA line cable 2.0m pair model using plasma (metal compound powder) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
1.0 m digital cable, BNC terminal revision B type on both ends A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
The balance cable is a 1.0m pair XLR female (2nd hot) to XLR male (3rd hot). The silver-plated OFC conductor is bright and clear, and you can enjoy the transparency of a PAD. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable 0.75m pair REAN plug Neumann RCA cable familiar from the prestigious German family. Recommended for those who listen to classical music on records. Since it is slender and soft, it is useful in a variety of situations. There is dullness on the plug. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 305572 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10002357, 10002357 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 100003931 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Digital cable 1.0 m (RCA-BNC terminal) revision B type. A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. On the exterior, oxidation and darkening of the terminals can be seen. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
As an ideal interface between mid-class audio components for a 1.0 m pair of RCA cables, it fully demonstrates its performance for any device and provides the enjoyment of music along with warm temperatures. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
The price has been reduced! 2024/6/4 sales price 29,800 yen genuine Diaton DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/6/8 sales price 298,000 yen Maintained! A player equipped with a genuine SME 3010R black model for the 100th anniversary Centennial. This is a famous machine that perfectly matches the high sense of resolution unique to SMEs and the individuality of the supple TD126. The quietness of the floating suspension and belt drive and the analog sound with a low center of gravity are excellent words. The relatively compact housing, ease of use, and good balance in terms of sound quality are also attractive. The exterior has dullness and scratches. Serial 66529 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (replaced due to poor contact with the display lamp. Servo circuit electrolytic capacitor replacement. Cleaning between armweights and shafts. Clean the arm clamp area. Loosen and re-tighten the upper arm screws. Strobe mirror cleaning. Elevation belt and turntable belt replacement The PU cord ground wire has been repaired. (Arm operation, voice check OK)
Accessories: instruction manual, phono cable
Main specifications: belt drive, 33/45/78 rotation compatible, W505 x H170 x D395 mm, 14 kg, arm part: static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), adjustable needle pressure range 0 to 5 g
The disposal price has been reduced! (Member prices are not applicable) 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8,000 Hz maximum input 40W 8Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/29 sales price 89,800 yen ※It is cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
This is a classic jewel tone (made in Nagoya) shell. There is slight dullness and mounting scratches on the body, but overall it is in good condition. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: machined aluminum block with a dead weight of 12g
Set of 4 Kyocera ceramic insulators The top is made of metal and the bottom is made of cork material. It is clear and you can expect the unique sound of ceramics. The exterior has scratches and stains from use over time. (FUJISAWA KOSHI)
Accessories: none
Main specifications: diameter 30mm height approx. 15mm weight approx. 25g/piece
*Lead wire missing. An NR (Non Resonance) head shell with the shell body and plug part integrally molded. It has a structure where the main body is tightened from the top and bottom with a finger plate and cartridge, there is no need for a stop nut, and it comes with an overhang adjustment memory, making it easy to set up. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 10 g (actual measurement)
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg
The price has been drastically reduced! 2024/6/4 sales price 278,000 yen The tweeter has been replaced with a brand new one at the manufacturer! A masterpiece model of a 2-way bookshelf speaker with excellent clarity and delicate expressiveness. It's a low range with more volume than it looks, and I'm amazed at the high degree of perfection. There are scratches and scratches on the exterior. Serial 0010357, 0010358 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 manufacturer maintained (both side tweeters replaced with new ones)
Accessories: Jumper cable (general purpose product)
Main specifications: 2-way 2-speaker bass reflex type 88dB 8Ω W238 x H418 x D351 mm 11.5 kg
Equipped with an impedance changeover switch (LOW: 5 to 50 KΩ, MID: 40 to 100 KΩ, HIGH: 90 KΩ or more) that optimizes characteristics according to the input impedance of devices connected to a 1.0 m pair of RCA cables, a Valerie structure with all phase characteristics, and a high C/P model that employs many MIT patented technologies such as CVT couplers. (FUJISAWA KOSHI)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original box
Balance cable 1.0 m pair XLR cable using a huge network that is synonymous with MIT. The fact that the transparency is clearly increased is a word. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Set of 4 An ideal acoustic damping material (sorbosane) is used. It helps improve the sound quality of players, amplifiers, etc. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: load capacity 80 kg; size: diameter: 50/5 mm thick
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI)
Main specifications: diameter 35 mm x height 15 mm
J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI)
Accessories: none
Main specifications: diameter 35 mm x height 15 mm
Set of 2 carries a stable potential and a clean signal by covering it with an item plug that plays a role in preventing noise from being mixed in or signal loss. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: length 70mm inner diameter 43mm
※The height is 35 mm. The popular ICP composite spike has arrived. It is a composite material made of hard material and soft material. Combining a stainless steel chip with a modern body is effective in preventing vibrations. (FUJISAWA KOSHI)
Accessories: none
Main specifications: hybrid cone spike diameter 35mm x H35mm
PSE certified product. This product combines Eau Rouge's CFRP technology with a lightweight, highly textured acrylic box. Although it is the company's entry model, it is a product with a firm focus on sound quality. There are a few small scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: W300×H80×D65mm
Krypton high carbon steel insulator set of 4 It is a product that greatly improves acoustical and physical properties such as sound propagation speed with a special hard coating. The bottom surface uses silicone rubber material that dampens the natural vibrations of the metal and has an anti-slip effect with the floor, and has an adhesive effect on the floor. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: flat type, diameter 40 x height 10 mm, 95 g per piece