Set of 4 African ebony 32mm diameter spike base By itself or in combination with the company's PB-9, it can be placed under a speaker, amplifier, etc., to improve sound quality. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: diameter 32 x thickness 12 mm
Set of 4 African ebony 32mm diameter spike base By itself or in combination with the company's PB-9, it can be placed under a speaker, amplifier, etc., to improve sound quality. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: diameter 32 x thickness 12 mm
It is the base for Yamamoto's acoustical crafts, which are highly regarded for their horns and enclosures. The plate-shaped base is made of laminated Asada cherry wood, and can be used not only as an amplifier, but also as a speaker stand. Stability has been improved, and you can enjoy tight sound quality (Hiroki Aso)
Main specifications: thickness: 25 mm; dimensions: 600 x 480 mm; weight: 4.5 kg
This is an upholstered sound control panel with unknown details. Sound diffusion can be adjusted by arranging them in various places according to room conditions. There is a feeling of use on the exterior such as scratches and dullness (Tomoho Asaine)
Accessories: none
Main specifications: size W460 x H1220 x D60 mm weight 2.2 kg (actual measurement)
This is an upholstered sound control panel with unknown details. Sound diffusion can be adjusted by arranging them in various places according to room conditions. There is a feeling of use on the exterior such as scratches and dullness (Tomoho Asaine)
Accessories: none
Main specifications: size W460 x H1220 x D60 mm weight 2.2 kg (actual measurement)
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been reduced! 2024/4/28 sales price 5,000 yen set of 4 speaker stands Block type can be installed either vertically or horizontally. It is a very convenient and useful item for installing medium sized speakers, etc. There is a feeling of use on the exterior, such as dullness or peeling of the outer sticker ※ There is content like sand inside (Asaine Tomoho)
Accessories: none
Main specifications: Scythe W110 x H190 x D390 mm weight 6.6 kg (actual measurement)
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
XLR cable 1.5m pair interconnect cable with unknown details The plug is made by Neutrik (Tomoho Asaine)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
XLR cable 1.5m pair interconnect cable with unknown details The plug is made by Neutrik (Tomoho Asaine)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: none
Unspecified power cable 2.0m. The plug is Panasonic WF5018K, and the connector is made by Global Electronics. This cable is relatively easy to handle. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Power cable 1.5m eyeglass specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Asaine Tomoho)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
This is a very rare ZAIKA tubular preamp. The rich, unobtrusive sound is recommended for those who want to relax and listen to music. The vocals in particular are a must-listen. It is an item that makes you feel particular about the left and right independent volume and detailed tone volume. There is a feeling of use on the exterior, such as paint peeling and dullness (Takahashi Nobuyuki)
Maintenance information: 2024.6.20 Operation confirmed
Accessories: none
Main specifications: size W400 x H105 x D275 mm, weight 4.8 kg (actual measurement)
Yamaha's new compact stereo CC-75 series speakers. Equipped with Yamaha active servo technology that reproduces rich deep bass even though it is small. The exterior has a feeling of use such as dullness and small scratches. Serial 646497Y0 646507Y0 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net
Main specifications: 14cm woofer, 5cm tweeter, 1.1 cm super tweeter impedance 6 ohms, playback frequency band 40 Hz to 20,000 Hz, W200 x H330 x D239 mm, 4.3 kg
A sound control panel that adjusts the sound field by absorbing and scattering sound. Not only can it adjust rooms with sound problems, such as dead rooms, etc., it also has the effect of expanding the sound field space in various rooms. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions: width: 587 x height: 1200 x depth: 29 mm; weight: approx. 5.2 kg/sheet
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
A sound control panel that adjusts the sound field by absorbing and scattering sound. Not only can it adjust rooms with sound problems, such as dead rooms, etc., it also has the effect of expanding the sound field space in various rooms. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions: width: 587 x height: 1200 x depth: 29 mm; weight: approx. 5.2 kg/sheet
Maintained in 2023/7! A control amplifier that inherits the sound of Yamaha's famous C2a. A highly reliable phono equalizer is used, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. In addition to dullness and small scratches on the exterior, there are scratches on the front sub-panel and insulator marks on the top plate. Serial E052015SU (Hiroki Aso)
Maintenance information: 2023.7.13 Maintained (PHONO circuit IC/capacitor replacement, main board, soldering, deterioration, all correction, volume type, contact correction, long time sound output check)
Accessories: copy of instruction manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 9,800 yen*Currently sold, it is cheap because it is in poor condition. This model has a nicely looking model with units arranged in the center. It has excellent sharpness from low to high frequencies, and is perfect for those who listen to pop music. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 105025A 105025B (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: low frequency 18 cm cone woofer high range 3.5 cm dome tweeter impedance 6 ohm allowable input 70W W225 x H370 x D229 mm 5.4 kg/book
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
The price has been reduced! 2024/6/2 sales price 348,000 yen model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. As for the exterior, there is a feeling of use such as line damage or dullness on the top plate. Serial 0850704021 (Tomonori Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual copy remote control power cord spike
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
The price has been drastically reduced! 2024/6/11 sales price 35,000 yen with dedicated stand LS-500! Spirit is one of the most popular in the SX-500 series. Like Victor, who continues to preserve the natural sound, it makes acoustic instruments and vocals sound lustrous. There is a feeling of use on the exterior such as scratches and fading (Tamai Jun)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: dedicated stand jumper cable
Main specifications: Sealed bookshelf type Alnico unit, body size dimensions W270 x H455 x D255 mm, 12.5 kg, stand size W294 x H440 x D330 mm, stand weight 6 kg
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
MiniHDMI to HDMI converter cable 5.0 m Details are unknown, but it is a thin, lightweight cable that is easy to handle. The sheath smells like tobacco (Takahashi Nobuyuki)
Maintenance information: 2024.5.4 unchecked
Accessories: none
Maintained! Introducing affordable power amplifiers. Since it comes with a selector and volume, it can also be used as a pre-main. The color is calm green. It feels a bit clear, but the sound quality is hard to get at this price. The exterior has a feeling of use such as disappearing lettering and dullness. Serial 02110183 (Tomonori Asaine)
Maintenance information: 2024.6.21 maintained (right CH output tube replacement function SW cleaning vacuum tube pin cleaning capacitor position correction wiring restyling bias check output voice check interior and exterior cleaning)
Accessories: power cable
Main specifications: 6BQ5 push-pull output 12W 100V vacuum tube used: 6BQ5 × 2 · 12AX7 × 1 · 12AU7 × 2 · 5AR4 W360 × H170 × D260 mm weight 12 kg
※Since there is no main unit, operation has not been checked. Nagaoka replacement needles. This is a TRIO N-39 compatible product. As for the exterior, the needle tip is slightly to the left (Hiroki Aso)
Maintenance information: 2024.4.7 operation unchecked
Accessories: none
Main specifications: Appropriate needle pressure 1.5g
The price has been reduced! 2024/6/14 sales price 99,800 yen TRIO premium FM tuner equipped with a valuable 9-speed vari-controller. High sensitivity and thick sound typical of a high-end aircraft. The high level of construction, which is particular about the texture of the knob and dial, is also a first-class product. The 15 kg body is just like a preamp. The exterior has a feeling of use such as dullness and small scratches. Serial 910367 (Tomonori Asaine)
Maintenance information: 2024.6.14 Operation confirmed
Accessories: copy of instruction manual
Main specifications: reception frequency 76 MHz to 90 MHz antenna impedance 300 ohm balanced/75 ohm unbalanced W460 × H161 × D463 mm 15 kg
RCA-XLR conversion cable 2.0m pair is a cable with a firm conductor similar in shape to a Siltech cable using a plug manufactured by Hotswitch Craft Co., Ltd. 2. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
This is a firm conductor cable with a shape similar to a Siltec cable using a 3.0 m pair XLR cable with a plug manufactured by SwitchCraft. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The price has been reduced! 2024/6/1 sales price 118,000 yen A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/29 sales price 89,800 yen ※It is cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/15 sales price 148,000 yen Maintained by TEAC! VRDS-25 rigid menism final model. This is a popular model used by JAZZ/ROCK fans with a strong housing and a highly accurate VRDS mechanism, and has high resolution and clear contours. Spikes are attached to the solid 8 mm thick bottom plate, and the excellent construction with an excellent sense of reliability is also attractive. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.26 Maintained (All parts have been inspected. We have confirmed wear on the tray belt, clamp belt, and turntable bearings. Tray belt, clamp belt, and turntable bearing replacement. (Check operation by cleaning and lubricating the pickup and mechanical parts)
Accessories: Remote control instruction manual copy
Main specifications: multi-bit DAC, 25 bits, 8 times oversampling digital filter, W442 x H145 x D344 mm, weight 23 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
The RCA cable uses a 2.0m pair of 8N conductors, double shielded, and denser insulating materials and compression twists, and the sense of attack creates a realistic weight of sound. The exterior is dull (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W450 x D500 x H40 mm approx. 7 kg
1 sheet only Taock audio board It has a 5-layer structure with cast iron sandwiched between MDF and oak veneer attached to the surface material. It can be expected to prevent floor noise and improve sound quality. Dullness and bruising are scattered (Tomoho Asaine)
Accessories: none
Main specifications: MDF main material W500 x D450 x H55 mm 9 kg
※1 sheet only. melamine veneer, cast iron powder, high density wood board. This board has a 5-layer structure of phenolic laminated boards and has a beautiful wood grain. It has a thick, orthodox sound. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W450 x D500 x H40 mm approx. 7 kg
※It is inexpensive because there are many scratches. TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. The exterior has scratches on the side, and there is a feeling of use such as a line scratch on the top plate (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
The disposal price has been reduced! Member discounts are not applicable. 2023/5/9 sales price 17,000 yen set of 4. A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1
TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. The exterior has scratches on the side, and there is a feeling of use such as a line scratch on the top plate (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
The price has been reduced! 2024/4/21 sales price 4,500 yen This is a genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Speaker cable 2.0m pair with banana plugs on both ends Supra speaker cable using a patented bifiller structure. It boasts excellent transient characteristics that do not make you feel a difference in time, and high music reproducibility with high transparency and resolution (Asaine Tomo)
Accessories: original box
USB cable 3.0 m A-B type The sound image floats up softly, and freshness and warmth coexist, and it is a cable that clearly emits the sound typical of Scandinavia. The exterior has a feeling of use such as dullness (Hiroki Aso)
Accessories: original box