Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
This transformer is the best match for the company's DL-S1 and DL-103 series. You can enjoy the depth and luster of a clear, natural sound. The large amount of information unique to high-end machines brings out even the smallest details of the characters on the cartridge. There is slight dullness and small scratches (Takasaki Atsushi)
Maintenance information: 2024.9.14 sound output confirmed
Accessories: original box, instruction manual
Main specifications: 6N wiring material compatible impedance 3 to 40 ohms 10 to 80,000 Hz boost ratio 1:13 W 150 x H70 x D 175 mm 3.2 kg
A standard woofer installed in A7 systems, etc. The highly efficient and clear sound is perfect for jazz, etc. A classic model with an American sound that is bright and crisp. There are repair marks and stains on the cone paper, and there is a feeling of use such as dullness and stickiness on the edge viscoid (Kanai Hidetsugu)
Maintenance information: 2024.5 maintenance details (viscoid adjustment, terminal/vis-cleaning)
Accessories: none
Main specifications: 38cm cone woofer unit Alnico magnet frequency characteristics 20 to 1600 Hz 8 ohms weight 7.9 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2024/8/27 sales price 158,000 yen*One SP terminal is a replacement, so it's cheap. This speaker system inherits the DS-205 design philosophy of making small-aperture woofers sound smoothly with a large capacity enclosure. You can enjoy the soft texture and loud sound. In addition to the exterior, as described above, a feeling of use can be observed, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.30 maintenance (exterior cleaning/touch repair, 1 terminal replacement)
Accessories: Saran net, jumper cable (external product)
Main specifications: 2-way bass reflex type 6.3 ohm 87 dB W360 x H925 x D290 mm 25 kg
The company's integrated CD player. The sharp, speedy sound quality is suitable for JAZZ/ROCK. In particular, high-resolution baselines and dry snare sound quality show better performance than the price. There are small scratches on the upper center corner of the front, top surface, etc., and there is a lot of feeling of use. Serial 080740019 (Murakoshi Yoichi)
Maintenance information: 2024.9.18 sound output confirmed
Accessories: remote control, instruction manual, spike, power cord
Main specifications: analog output XLR, 1 RCA system, 1 digital output, normal, 1 direct system each, W420 x H98 x D220 mm, weight 6.2 kg
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? The exterior has a feeling of use such as dullness and small scratches (Ryo Mizusaki)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, transformer adhesion repair. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: loss over frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Refresh yourself by replacing the insulated push with a new one! The terminals have also been polished, so you can use it comfortably. A dividing network with a crossover frequency of 1200 Hz. If you cut it a little lower, I think the impression will change quite a bit once you try using it. How about going with making a system? The exterior is smudgy and has a feeling of use. (OYAMA Sachiko)
Maintenance Information: 2015.10.19 Maintained (terminal polishing, cleaning, insulation bushing & mounting screw replacement. ATT (SW) cleaning.
Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz)
Accessories: none
Main specifications: crossover frequency 1.2 kHz impedance low range: 8 to 12 ohms high range: 12 to 16 ohms 1.1 kg
The price has been drastically reduced. 2024/9/15 sales price 79,800 yen DSD compatible network audio player. It is possible to play music files on DLNA1.5 compliant media servers such as PCs and NAS connected to a home network. It is also equipped with a USB TypeA/TypeB terminal. A high-capacity external hard disk, iPod/iPhone, USB memory input, a maximum 384 kHz/32 bit high-resolution sound source, and an asynchronous USB DAC function that enables native playback using a DSD sound source have also been realized. Serial PJIV002497 (Murakoshi Yoichi)
Maintenance information: 2024.9.14 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: sampling frequency 32 to 192 kHz DSD 5.6 MHz/2.8 MHz, compatible format DSF FLAC WAV MP3 WMA AIFF ALAC digital input: optical/coaxial iPod/iPhone USB memory external USB hard disk network terminal LAN (100base-TX/10base-T) W435 x H121 x D339 mm 12.5 kg
Maintained! This network is used for A5, A7, etc. Unlike channel dividers, it is easy to handle, and the sound is familiar to the ear. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 Maintained (frequency characteristic check, ATT cleaning, terminal/screw cleaning, butyl tape removal work)
Accessories: none
Main specifications: crossover 500 Hz 8 ohms W123 x H140 x D132 mm 1.6 kg
New dust cover created, manufacturer maintained! Comes with SHURE M44G! A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move to the desired position and perform without touching the tone arm are convenient, so you can easily enjoy analog. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.7.17 manufacturer maintenance (arm disassembly repair, arm position detection sensor replacement. Exterior cleaning, lead-in adjustment, sound test.) Create a new dust cover
Accessories: instruction manual, SHURE M44G cartridge
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Maintenance has been completed, including the creation of a new dust cover! Shure M44G cartridge included A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move to the desired position and perform without touching the tone arm are convenient, so you can easily enjoy analog. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.17 Maintained (arm disassembly repair, arm position detection sensor, PU output cord replacement. (Lead-in adjustment, sound test, cabinet cleaning, each button cleaning)
Accessories: cartridge, adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg