Sony VM-8GS replacement needle ND+-108G compatible Since there is no main unit, it has not been checked, and it is the current situation (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VX-50G Since there is no main unit, it has not been checked, and it is the current situation (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Sony VM-32G This is an ND-134G compatible needle. Operation has not been confirmed since there is no main unit (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Parallel adapter for stereo mini plugs There are many ways to use it, such as two people enjoying music at the same time from a single earphone terminal. There is a slight feeling of use (Murakoshi Yoichi)
Accessories: none
Standard plug to mini jack plug adapter. A microphone with a mini plug can be used as a microphone terminal on a tape deck, etc. (Mizushima Itsuro)
Accessories: none
Sony Theatre System Tallboy Speaker The sweep test is good, but since the corn paper has dents, it is currently sold at a low price. This speaker is easy to use with both front and rear speakers. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.3.18 Operation confirmed
Accessories: nothing
Main specifications: W60 x H1050 x D60 mm bottom 250 mm weight 3.4 kg (actual measurement)
Stereo standard jack extension cable 3.0 m model number unknown, Sony standard jack extension cable Uses OFC wire and gold-plated plugs. How about an extension cable for headphones (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
Optical angle/optical mini plug - light angle/optical mini plug cable 1.0m exterior, the cord attached to the adapter is broken, and it is sticky, dull, and feels used (Kobayashi Hitoshi)
Maintenance information: 2024.3.31 continuity confirmed
Accessories: original box
Standard plug to RCA cable 2.0m used for transmission from a headphone output such as a deck to an RCA input such as an amplifier (Yoichi Murakoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
Stereo mini jack to RCA male conversion cable 0.2 m has an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Micro jack to stereo mini plug adapter It is used when converting a micro plug to a stereo mini plug. There are cracks in the plastic packaging due to aging (Murakoshi Yoichi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: package
A plug adapter that converts a micro jack to a stereo mini plug. It is convenient for converting plugs into headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: total length 8 cm
*Currently sold. Details of only one Sony 15 cm full range unit are unknown, but there is an I-502-437-11 description on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
*Currently sold. Details of Sony's 15 cm full range unit pair are unknown, but there is a description of i-502-437-11 on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
A record player equipped with a Bluetooth (R) function and a USB output terminal. It can be connected to a Bluetooth (R) compatible wireless speaker, etc., and is recommended for those who want to enjoy a record player casually. As for the exterior, there is a thread on the dust cover. Serial 1007740 (Tamura Eiji)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: AC adapter, EP adapter
Main specifications: W516 × H198 × D433m mass 5 kg
Maintained. An impressive pre-main with a glossy, elegant sound. The advantage of being equipped with MOS-FET is that visibility is good, and the good balance without feeling a sense of loss in sound is attractive. It is a model that can be enjoyed regardless of genre. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (speaker relay replacement, push SW replacement due to sound interruption when switching MUTING switches, replacement volume with replacement volume for sound output, other INPUT selector electric SW, Cartrich LOADSW, speaker rotation switch, direct INPUT switch, polishing and cleaning grease application for each disassembly contact, DC balance DC bias adjustment, due to large internal dirt (Since it is a VR replacement for cleaning and volume, the volume cannot be changed with the remote control since it is not electric)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) W470 × H165 × D435 mm 21.3 kg
Maintained! A hit model in the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a chip on the corner of the side panel. Serial 203719 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 maintained (replaced with a custom-made product due to VR loud sound, speaker relay replaced, MUTIG push SW replaced, other INPUT selector SW, cartridge LOAD SW, TAPE selector SW, SW disassembly contact polishing grease applied, other DC bias DC balance adjustments, confirmation of sound output for each input/output terminal connection)
Accessories: No accessories
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
※There is no problem with operation, but it is currently sold because it is cheap. Sony ES series power amplifier using a G chassis. It's an easy-to-use model with an unobtrusive tone, and it makes you feel the power of the low frequencies. It has 2 input systems with volume, and in addition, it is also attractive that it can be used in mono, so it is versatile. In addition to the exterior, no side panels, and a sticky mark on the back, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual
Main specifications: 110W+110W (8Ω), 300W (BTL 8Ω) W470 x H150 x D365 mm 13.2 kg
※There is no problem with operation, but it is currently sold because it is cheap. Sony ES series power amplifier using a G chassis. It's an easy-to-use model with an unobtrusive tone, and it makes you feel the power of the low frequencies. It has 2 input systems with volume, and in addition, it is also attractive that it can be used in mono, so it is versatile. In addition to the exterior, no side panels, and a sticky mark on the back, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual
Main specifications: 110W+110W (8Ω), 300W (BTL 8Ω) W470 x H150 x D365 mm 13.2 kg
This is a rare insulator made by Sony. It is a well-made insulator using air, rubber, and oil. There is a feeling of use, such as marks of the device being placed on it. (FUJISAWA KOSHI)
Accessories: none
Main specifications: maximum load 30kg/weight 89g/piece per 4 pieces
Maintained! More than 50 years have passed since the release of Sony's vintage pre-main. The innocent tone doesn't make you feel stressed is good, and the balance from treble to bass is good, and the tone control response is good. The retro-futuristic design is also impressive. *This unit does not use a speaker protection relay, so it may make an abnormal noise when the power is turned on and off, but this is a specification. There is a scratch on the cabinet on the exterior (Sasaki Shota)
Maintenance information: 2024.6.13 maintained (board repair due to poor contact within the TONE board, 4 transistors with PHONO noise were replaced, adjusted semi-fixed VR due to unstable idling voltage, contact repair due to poor contact with each push SW contact, and volume slide VR disassembly and cleaning were performed.)
Accessories: none
Main specifications: 35W+35W (8Ω) input sensitivity/impedance Phono 1.2mV/47kΩ Phono 2 system Tuner 1 system AUX 2 system Tape 2 system AC100V, 50 Hz/60 Hz 100 W 400 x H149 x D316mm weight 9.8 kg
Maintained in 2023/12! A stereo power amplifier that takes into account ease of use in multi-channel systems, a must-see for multi-channel systems! Contrary to its cute size, it has quite a bit of driving power. The sound is energetic and fresh, just like Sony of this era. There is a feeling of use on the exterior such as line damage or dullness. Serial 205245 (Tomoho Asaine)
Maintenance information: 2023.12.5 maintained (power supply micro SW deterioration replacement, semi-fixed VR replacement for bias adjustment, input RCA terminal L/R poor contact exchange transistors with noise at 2 locations, other DC bias adjustment connection sound confirmation)
Accessories: none
Main specifications: 40W+40W (8Ω) W200×H149×D320 mm 6.5 kg
Maintained in 2023/5! A 2-way and 3-way channel divider that can be switched in a variety of ways. It is compatible with various crossovers, can be adjusted at a detailed level, and is extremely easy to use. The exterior has a feeling of use such as dullness. Serial 200213 (Tomoho Asaine)
Maintenance information: 2023.5.11 Maintained (power supply fuse replacement, other sound output during confirmation, transistor and capacitor replaced to confirm Chilean noise, current output test after parts replacement)
Accessories: copy of instruction manual
Main specifications: 3-way/2 way Low150/250/400/600/800/1kHz High1.5k/2.5k/3.5k/4.5k/6k/8kHz W200×H149×D316mm 3.8 kg
Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed.
Accessories: copy of the manual
Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg