The interior and exterior have all been overhauled! Officially imported by TEAC. Genuine TEAC autograph equipped with a TANNOY K3808 unit. The new construction enclosure, which was manufactured with a license from the home country of England, was particularly evaluated for its good sound, and is characterized by a rich sound field reproduction that sounds loudly like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid to low range. The exterior has also been beautifully finished due to maintenance (Yonejima Satoshi)
Maintenance information: 2024.9.21 Maintained (exterior repair/polishing/clear finish, rear baffle repair/painting, saran net replacement. Unit maintenance: Magnetic circuit rust removal/gap cleaning/center adjustment for both low and high frequencies. Network maintenance: frequency characteristic check, ATT cleaning, 4-pin terminal contact cleaning, faston terminal replacement, terminal cleaning)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output, sound pressure level, 96 dB, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D67
Maintenance has been completed, including disassembly and cleaning of all knobs. We have all 1 to 4 crossover units! A channel divider that can be configured with multiple amplifiers from 2 way to 4 way. It has good operability, is simple and easy to handle. The sound is clear and sharp. The exterior is dull and has small scratches (Wang Zhan)
Maintenance information: 2024.9.17 Maintained (The power lamp was replaced, all level controllers were disassembled, and the sliding brush and stator base were cleaned and treated to prevent oxidation. After disassembling all frequency changeover switches, the sliding contacts were cleaned, polished, and treated to prevent oxidation. (The DC offset for all channels has been adjusted)
Accessories: instruction manual, crossover units 1 to 4
Main specifications: 2 to 4 way DC unit amplifier configuration Vessel filter level control 0 to -30 dB (1 dB step) output impedance 100 Ω SNR 110 dB W 480 x H80 x D365 mm 7.4 kg
*Currently sold. Taket's super tweeter with a playback capacity of 150 kHz or more. The slide switch for switching the crossover was removed from the original BATPRO, fixed to the A position, and the terminals were changed. Efficiency can be switched between 5 levels with the rotary switch, and natural harmonics are produced (Yamato Yuki)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: original box instruction manual
Main specifications: maximum rated 35 V impedance 8 ohms playback frequency band 18 kHz to 150 kHz W125 x H90 x D100 mm approx. 260 g
Maintained! A famous and famous first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. There are line scratches and scuff marks on the exterior. Serial J3Y212 (Tamura Eiji)
Maintenance information: 2024.9.20 Maintained (the DISC1 signal line has an input volume, impedance changeover switch, and input selector switch, and input selector switch have different signal paths from DISC2, so the input volume was exchanged. Impedance switching, input selector cleaned again) 2024.7.27 Maintained (since the HIGH FILTER/LOW FILTER switch cannot be removed, the mounting part was remodeled and replaced. The gap is gone, but there is some switching noise when switching (both HIGE and LOW). (Overall switches are re-cleaned and comprehensively adjusted)
2022.12.25 Maintained (28 film capacitors and 60 transistors in each board were replaced. DISC LEVEL CONTROL CLEANING Other switch and volume cleaning.)
Accessories: copy of instruction manual, power cable
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
RCA cable 1.5m pair CZ is an abbreviation for control impedance. The conductor is silver-plated OFHC filled with a structural damping effect that holds uniform impedance characteristics over the entire length of the cable and a special gel (GEL) that enhances separation between internal core wires. The exterior is dirty, and there are scratches on the sheath and plug. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The interior and exterior have been refreshed! A speaker system incorporating late monitor red into the NEW RECTENGULAR YORK enclosure. The terminal part has been replaced with a banana plug and arranged for practical use. The sound of the box comes out well with a well-balanced sound from low to high frequencies. I definitely want this speaker to play in combination with a tube amplifier (Kojima Yosuke)
Maintenance information: 2024.9.20 Maintained (exterior repair/polishing/clear finish saran net cleaning/repasting, fraying repair. Unit maintenance: Magnetic circuit gap cleaning/center adjustment for both low and high frequencies, peeling and bonding of the center cap. Network maintenance: frequency characteristics check, 4-pin terminal cleaning)
Accessories: none
Main specifications: bass reflex system floor type 15 inch coaxial 2 way (Monitor RED 15 inch) frequency characteristics 30 Hz to 20,000 Hz crossover frequency 1,000 Hz maximum input 50 W impedance 16 ohms size W597 x H1,070 x D375 mm
Famous machines from yesteryear have been revived due to the creation of a new Saran Net and internal and external refreshment maintenance! Middle monitor walnut specification. The punchy bass and sharp, smooth mid-range are all very attractive models. Paper Dome tweeters paint a realistic texture in jazz (Wang Exhibition)
Maintenance information: 2024.9.20 Maintained (new saran net created, woofer cone paper coating. Mid-center cap dent repair, one-sided cone paper tear repair Network frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement. (Detachable unit)
Accessories: none
Main specifications: 3 way 3 speaker front bass reflex type sound pressure level 91 dB impedance 8 ohm crossover frequency 1.5 kHz/6 kHz playback frequency band 45 to 15,000 Hz W362 x H597 x D298 mm 20 kg/book
Maintained! A high performance power amplifier that uses Orex's specialty lambda capacitors. Pure Class A operation and Class AB operation can be selected by switching the switch. The strong construction is directly linked to sound quality, making the sound quality fresh and sharp. There are scratches and scratches on the exterior. ※The power cable has been changed to a 3P inlet. (FUJISAWA KOSHI)
Maintenance information: 2024.9.19 Maintained (The bias changeover relay was replaced due to poor contact. The protection relay was replaced, and 4 electrolytic capacitors were replaced. The operation switch disassembly contacts have been cleaned. Adring current and offset voltage were checked. The interior has been cleaned. I checked the input/output.)
Accessories: power cord
Main specifications: Rated output: A grade 50W+50W (8Ω) AB grade 200W+200W (8Ω) playback frequency band 5Hz to 100kHz speaker impedance 4Ω to 16Ω external dimensions W450 x H172 x D473 mm weight 30 kg
Good condition! The only bookshelf type model in the PERSONA series, which is Paradigm's flagship. A pure beryllium diaphragm with a purity of 99.9% is used not only for the tweeter but also for the mid-bass driver, and by making full use of proprietary technology such as PPA acoustic lenses and ART edges, it is possible to reproduce sound without color to the extent that the presence of the speaker is erased. The exterior is beautiful with no noticeable scratches. Serial AGG6579086O10, AGG6579087O10 (Fujisawa Yukishi)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: instruction manual, spike, stand, mounting screws, cloth, gloves
Main specifications: 2 way 2 speakers bar reflex type unit used: 25mm dome tweeter 178 mm cone woofer sensitivity 92 dB impedance 8 Ω crossover frequency 2.5 kHz playback frequency band 60 Hz to 45 kHz (± 2 dB) W225 x H435 x D330 mm weight 14 kg
Comes with a dedicated stand! Victor's high-definition bookshelf speaker. It plays piano, violin, vocals, etc. in a supple manner. The natural, transparent sound in the mid to high range is exquisite. Solid mahogany cabinets also contribute to sound quality. There are scratches and scratches on the exterior. Serial 09200897 (Fujisawa Yukishi)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: saran net, stand
Main Specifications: [SX-V1A-M] 2 Way 2 Speaker Kurt Mueller Rubber Edge Tweeter Alnico Magnet Usage Impedance 4 Ω Output Sound Pressure Level 87.5 dB W200 x H343 x D263 mm 8.3 kg/book [LS-V1-M] W260 x H525 x D330 mm 4.3 kg/book
Maintained! A pure A grade mono power amplifier with a good match of neat tone and strength. Smooth, glossy, warm color sound. The delicate yet warm, dynamic sound typical of a Class A amplifier is attractive. In addition to dullness and small scratches over time, the condition is peeling veneers and scratches that are not very noticeable on the top plate. Serial Cj1000777 Cj1000786 (Yamato Yuki)
Maintenance information: 2024.9.19 Maintained (capacitor fixed by band, all semi-fixed volume replacement for both amplifiers, all board solder crack correction output relay contact polishing current amplifier section and dynamic supply unit, DC offset adjustment and DC balance of voltage amplification amplifier part, distortion minimization adjustment meter indication/physical characteristics readjusted)
Accessories: instruction manual
Main Specifications: Mono Power Amplifier Effective Output 300W (8Ω) Input Sensitivity/Impedance: 1V/50kΩ Power Display: Peak Level Meter W468 x H203 x D410 mm 25.6 kg
This is a famous woofer that is also used in the ALTEC A7. The biggest appeal is the low frequency, where the cone paper is lighter than the 515 series woofer and has a sense of volume. You can experience excellent, penetrating bass with particularly penetrating power in jazz systems, etc. Stains and paint peeling are on the frame, and styrene is attached to the gasket. Serial 14630/18294 (Tamura Eiji)
Maintenance information: 2024.9.18 sweep check OK
Accessories: none
Main specifications: 38cm woofer Alnico magnet playback frequency band 20 to 1600 Hz impedance 8 ohms rated input 30 W allowable input 50 W recommended crossover 800 Hz outer diameter 381 x H178 mm weight 7.9 kg/1
An interconnect cable finished by attaching terminals to a 0.95m pair RG type high frequency coaxial cable from Belden. The sharpness and extrusive sound are attractive. Characteristic impedance 53.5 ohms. You can see the exterior, dullness, rust on the terminals, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.16 continuity confirmed
Accessories: none
An interconnect cable finished by attaching terminals to a 2.0m pair RG type high frequency coaxial cable from RCA cable Belden. The sharpness and extrusive sound are attractive. Characteristic impedance 53.5 ohms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
*The corners are chipped, the top plate has line damage, and the attenuator is thin, so it is inexpensive and is sold as is. A sibling aircraft of Yamaha's famous NS-1000M. It is an easy-to-use monitor speaker that is neither too big nor too small (Oikawa Tetsuji)
Maintenance information: 2024.9.17 Operation confirmed
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, crossover frequency 800 Hz, 5000 Hz impedance 8 ohms, output sound pressure level 90 dB, W320 x H554 x D322 mm, 16.5 kg
Comes with original box Genuine fusion coordination. 120W A+D class stereo amplifier Furthermore, it is possible to operate as a 290W mono amplifier with a bridge amplifier. The goal is to achieve a tone unique to vacuum tube amplifiers, and it is designed with a more advanced even-order harmonic circuit. It is in good condition with no conspicuous scratches. Serial 4002149 (Fujisawa Yukishi)
Maintenance information: 2024.9.16 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: 120W (stereo), 290W (bridge) input impedance 47kΩ playback frequency band 10Hz-50kHz W235 x H55 x D276mm (including terminals and legs) 4.8 kg
Good stylus and cantilever! Comes with original box! Phase Tech/Phasement premium cartridges. The titanium base is an ebony body, and the magnetic circuit uses a particle module. The wide sound field, good cut, and natural sound can fully demonstrate the goodness of analog sound. Serial P1G1011021 (Fujisawa Yukishi)
Maintenance information: 2024.9.16 Operation confirmed
Accessories: instruction manual, original box, tools, needle cover
Main specifications: impedance 4 ohms, proper needle pressure 1.7 to 2.0 g, output voltage 0.27 mV or more, playback frequency range 10 Hz to 30 kHz, separation 30 dB or more (1 kHz), diamond stylus (line contact/curvature 0.03 x 0.003 mm), dead weight 10.2 g
The price has been drastically reduced. 2024/9/16 sales price 69,800 yen. JBL professional tweeters. Since it is designed to make sound fly far away, the sound quality is solid and straighter compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. There are dents on the horn corner, dents on the plastic part of the terminal head, and other scratches and mounting marks (Murakoshi Yoichi)
Maintenance information: 2024.9.16 sound output confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
The price has been reduced. 2024/9/16 sales price 25,000 yen. ※6 month warranty. MC step-up transformer. It features a body structure that thoroughly eliminates magnetic noise. The sound is fresh and smooth. The range is also wide, and the sound quality is relaxed and elegant. There are a few small scratches. Serial T30905084 (Murakoshi Yoichi)
Maintenance information: 2024.9.15 sound output confirmed
Accessories: none
Main specifications: Compatible cartridge impedance 1.5 to 40 ohms load impedance 47 kΩ boost ratio 26 dB W133 x H85 x 129 mm 1 kg
The price has been drastically reduced. 2024/9/16 sales price 54,800 yen. It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. The cantilever is slightly to the right. Serial 634631 (Murakoshi Yoichi)
Maintenance information: 2024.9.15 sound output confirmed
Accessories: original box, needle cover, instruction manual
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
*Currently sold. Onkyo enabled speakers. It is designed so that a Dolby Atmos sound field can be constructed using sound reflection from the ceiling. Accessories such as brackets and cables are missing (Ryo Mizusaki)
Maintenance information: 2024.9.16 sound output confirmed
Accessories: instruction manual
Main specifications: sealed impedance 6 ohms playback frequency band 90 Hz to 20 kHz W120 × H155 × D153 mm 1.2 kg
This is an original 15 inch rectangular yoke equipped with monitor red, which has been refreshed both internally and externally and has regained its original tone. In addition to network maintenance, the SP terminal also uses a banana type, making it easy to use. It is an ultra-rare speaker that brings out the appeal of all sources by replacing it with a 15-inch monitor red in the original box originally equipped with monitor gold. The sound of RED, which is a bit different from Monitor GOLD, plays such an elegant tone that once you hear it, you won't be able to leave your ears. The exterior is beautifully finished with exterior maintenance, but repair marks can be seen on the saran. Serial 73875, 74438 (Fujisawa Yukishi)
Maintenance information: 2024.8.28 Maintained (Unit maintenance: magnetic circuit gap cleaning center adjustment for both low and high frequencies. Network maintenance: frequency characteristic check, 4-pin terminal contact cleaning, terminal installation processing. Exterior repair/polishing/clear finish. Saran net cleaning/fraying repair/repasting, sound-absorbing material removal)
Accessories: No accessories
Main specifications: bass reflex system, floor type, 15 inch coaxial 2 way (Monitor RED 15 inch), frequency characteristics, 30 Hz to 20,000 Hz, crossover frequency, 1,000 Hz, maximum input, 50 W, impedance 16 ohms, size W597 x H1,070 x D375 mm, actual measurement 42.0 kg/book
Super tweeter ES-105 using spherical piezoelectric ceramics. Since it has a built-in network, it is designed to be highly convenient and easy to use. It is a super tweeter with a wide sound field, particularly excellent reproduction in the direction of depth, and is compatible with a wide range of speakers. There is a small bump on the top on one side. Serial 001046, 001047 (Fujisawa Yukishi)
Maintenance information: 2024.9.15 Operation confirmed
Accessories: No accessories
Main specifications: average sound pressure level 90 dB playback frequency band 15 kHz to 100 kHz resonance frequency 105 kHz rated impedance 8 Ω directional forward +/- 45 degrees maximum allowable input 50 w dimensions W90 x H65 x D 118 mm weight 1.1 kg/1 piece
This transformer is the best match for the company's DL-S1 and DL-103 series. You can enjoy the depth and luster of a clear, natural sound. The large amount of information unique to high-end machines brings out even the smallest details of the characters on the cartridge. There is slight dullness and small scratches (Takasaki Atsushi)
Maintenance information: 2024.9.14 sound output confirmed
Accessories: original box, instruction manual
Main specifications: 6N wiring material compatible impedance 3 to 40 ohms 10 to 80,000 Hz boost ratio 1:13 W 150 x H70 x D 175 mm 3.2 kg
The price has been drastically reduced. 2024/9/15 sales price 250,000 yen Esoteric Company limited edition of 400 units! This pre-main amplifier is famous as a reference for Tannoy. It's simple and easy to handle, and you can enjoy the moist sound of the vacuum tube. There is a feeling of use such as dullness, etc., and getter burns on the vacuum tube (Takasaki Atsushi)
Maintenance information: 2024.9.15 sound output confirmed
Accessories: power cord, instruction manual (copy)
Main specifications: 6L6GC vacuum tube, ECC82/83, output 18W+18W (8Ω), compatible impedance 8 to 16 ohms, W320 x H203 x D328 mm, 17.5 kg
The price has been reduced. 2024/9/14 sales price 49,800 yen A tall bow speaker with a hybrid configuration of a dome tweeter and ribbon tweeter. It is a tall boy speaker that pursues high frequency subtlety, good stretch, and softness. The entire main unit is sticky, and it is inexpensive due to missing jumper plates and spikes (Kojima Yosuke)
Maintenance information: 2024.9.14 Operation confirmed
Accessories: instruction manual, rubber foot
Main specifications: 3 way 4 speakers Frequency characteristics 43 Hz to 30 kHz Crossover: 700 Hz/2.5 kHz/14 kHz Efficiency 87.0 dB impedance 6 Ω W150 × H810 × D280 mm 10.4 kg/book
The price has been reduced. 2024/9/14 sale price 49,800 yen rare wood grain version. Compared to the 80s diamond tone, you can enjoy vocals with a supple tone. The low frequency punch has been firmly inherited, and you can enjoy the good balance unique to Japanese speakers. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.9.14 sweep test good
Accessories: none
Main specifications: 3-way 3 speakers, sealed, anti-magnetic specification unit, 30 cm cone type, 13 cm cone type, high range, 3 cm cone type, rated impedance 6.3 Ω, playback frequency band, 39 Hz to 32 kHz, output sound pressure level 90 dB, crossover frequency 600 Hz, 4 kHz dimensions W360 x H680 x D 285 mm, weight 21 kg
The price has been reduced. 2024/9/14 sales price 29,800 yen The center speaker for the company's IKON series. Sound loss in the low frequencies has been improved with the newly adopted wood fiber cone. There is stickiness around the woofer (Daiki Goto)
Maintenance information: 2024.9.14 Operation confirmed
Accessories: none
Main specifications: frequency characteristics (± 3 dB): 47 Hz to 30 kHz crossover: 3.2 kHz/14 kHz impedance: 6 ohms size 570 mm x H160 mm x D260 mm weight 7.70 kg
The price has been reduced! 2024/9/14 sales price 49,800 yen Compared to the 80s diamond tone, you can enjoy vocals with a supple tone. The low frequency punch has been firmly inherited, and you can enjoy the good balance unique to Japanese speakers. Saran net logo batch missing on one side. On the exterior, there are some holes in bumps, threads, and saran. Serial 14883/14886 (Yonejima Satoshi)
Maintenance information: 2024.9.14 sweep test is good
Accessories: saran net
Main specifications: 3-way 3 speakers, sealed, anti-magnetic specification unit, 30 cm cone type, 13 cm cone type, high range, 3 cm cone type, rated impedance 6.3 Ω, playback frequency band, 39 Hz to 32 kHz, output sound pressure level 90 dB, crossover frequency 600 Hz, 4 kHz dimensions W360 x H680 x D285 mm, weight 21 kg
Interior and exterior maintenance completed! EDINBURGH's last cork version. The meticulously designed high-resolution sound quality allows you to fully feel the depth and breadth. The beautiful, elegant appearance of natural wood grain is truly TANNOY. It also matches the interior of the room. As for the exterior, there are some stains left on the saran net (Tamai Jun)
Maintenance information: 2024.8.15 maintained (exterior repair, polishing oil finish, saran net cleaning/repasting unit maintenance (gasket adhesion, high frequency magnetic fluid removal gap cleaning center adjustment), saran key coating, ATT knob painting/contact cleaning, simple creation unit detachable)
Accessories: Saran net key
Main specifications: Bi-wire compatible 30cm coaxial 2-way impedance 8Ω (minimum 5.5Ω) Frequency characteristics 30Hz to 25000 Hz Output sound pressure level 95dB Dimensions: W660 x H1020 x D440 mm Weight: 44kg/bottle
The price has been drastically reduced. 2024/9/15 sales price 138,000 yen This tubular power amplifier kit was sold to commemorate the first publication of Stereo Sound's “Tubular Kingdom.” It has been developed and designed based on the concept of “letting as many people as possible enjoy the advantages of vacuum tube amplifiers,” and it achieves both high performance, high stability, and high reliability. The input is provided with independent left and right volumes so that it can be used even when directly connected to a CD player. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.9.13 operation confirmed
Accessories: none
Main specifications: 5881WXT/6L6WGC push pull/ultra linear connection vacuum tube 6L6WGC x 4, 12AU7 x 3 rated output 25W+25W (6Ω) output impedance 6Ω (suitable for 4Ω to 8Ω) W388 x H187 x D330 mm 19 kg
The price has been reduced! 2024/9/13 sales price 158,000 yen This model inherits the lineage of 4312. The sense of speed and range has been improved with a completely renewed unit, and it has been transformed into a high-fidelity speaker that can play all kinds of sources with a clean sound with good damping. There is a repair mark on the saran net frame on one side. Serial 16376, 16330 (Fujisawa Yukishi)
Maintenance information: 2024.9.13 operation confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex impedance 6 ohms playback frequency band 45 Hz to 35 kHz output sound pressure level 93 dB size W362 x H597 x D299 mm weight 17 kg
The price has been drastically reduced! 2024/9/11 sales price 178,000 yen New power supply unit created! All deteriorated capacitors, etc. have been replaced. MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive. The exterior is dull. Serial 0585 (Yonejima Satoshi)
Maintenance information: 2024.9.11 Maintained (new power supply manufactured, all deteriorated electrolytic capacitors and tantalum capacitors replaced, gain changeover switch replaced due to poor contact, replacement due to poor pin jack contact, readjusted each gain, specification inspection, sound output inspection (there are no current problems with the module))
Accessories: No accessories
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/9/11 sales price 69,800 yen This is a bookshelf type speaker following the TB1 series. The enclosure has high low-frequency reproduction capability, and its straight, transparent sound is suitable for ROCK, FUSION, etc. Urethane deterioration on the exterior and back port is progressing, and a feeling of use can be seen such as peeling, dullness, and scuff marks on the saran net (Kobayashi Hitoshi)
Maintenance information: 2024.9.8 operation confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker, anti-magnetic design, 170mm cone woofer/27mm aluminum hard dome tweeter, frequency characteristics, 40Hz-25kHz, crossover, 3kHz, sound pressure level, 90dB impedance, 8Ω, bi-wiring compatible dimensions, W200 x H400 x D300 mm, weight 8.5 kg
Maintained. This is a 2-way network. The bass is also extruded well, and the high frequency adjustment range can be taken widely with 2 types of HF/MF attenuators, so it is a model that is easy to match the desired sound quality. There is a crack repair mark on the corner (Oikawa Tetsuji)
Maintenance information: 2024.9.10 maintained (attenuator VR disassembly contact cleaning, crossover check OK)
Accessories: none
Main specifications: W114 × H190 × D228 mm 1.8 kg, crossover frequency 1.2 kHz, impedance 8 Ω, level control is continuously variable in the middle range up to -8 dB at 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
Maintained. This is Altech's 2-way, 800Hz crossover network. Equipped with an attenuator. Please use this when you want to change A5 or A7 to 800Hz. The exterior has small scratches, dullness, etc. and a feeling of use (Satoshi Yonejima)
Maintenance information: 2024.9.10 Maintained (attenuator VR disassembly contact cleaning. (Crossover check OK)
Accessories: No accessories
Main specifications: allowable input 100W input impedance 8Ω attenuator 1dB to 10dB crossover frequency 800Hz dimensions W122 x H140 x D143 mm weight 1.6 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. Serial 2722 (Asaine Tomoho)
Maintenance information: 2024.9.9 operation confirmed
Accessories: None ※No needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Currently sold. Component speakers. It has a clean tone from bass to treble, and is easy to play without habit. Definitely for subsystems and desktops. There is a stain on the saran net (Sasaki Shota)
Maintenance information: 2024.9.8 sweep test is good
Accessories: none
Main specifications: 2 way bass reflex speaker impedance 4 ohm 83 db/w/m 50 Hz to 100 kHz crossover frequency 6 kHz W164 x H282 x D268 mm 3.8 kg
Small headphones from Sennheiser. A perfect headphone debut with a well-balanced overall balance from bass to treble. Rather than sharp sounds, they are the type that enjoys the afterglow of the sound. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2024.9.7 sound output operation confirmed
Accessories: case
Main specifications: sealed dynamic headphone impedance 18 ohms playback frequency 16 Hz to 22 kHz sound pressure level 112 dB
The disposal price has been reduced. Member discounts are not applicable. 2024/9/7 sales price 248,000 yen with dedicated stand DK-205! A masterpiece of Diatone. The DS-205, which makes you feel the design of yesteryear, has arrived! The small aperture woofer is played in a large capacity enclosure, and the deep sound, which also has a soft, puffy texture, is attractive. It is a gem that is highly appreciated by music fans. Compared to the R305, etc., it is one size smaller and easier to handle. There are repair marks on the exterior, side molding, front of the stand, etc., and dents and abrasions are scattered (Kobayashi Hitoshi)
Maintenance information: 2024.9.,7 operation confirmed
Accessories: dedicated stand, saran net, jumper cable (replacement)
Main specifications: 2-way 2-speaker bass reflex output sound pressure level 88dB impedance 4Ω anti-magnetic design size W482 x H700 x D362 mm weight 26 kg stand H450 x H230 x D351 mm weight 9 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/9/7 sales price 798,000 yen ※For wall hanging only. Macintosh's masterpiece speaker that Okihiko Sugano also loved. The sound that can be felt throughout the body with 4 woofers and 48 tweeters is impressive. The dedicated equalizer MQ104 is compatible with various rooms. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.9.30 maintenance (exterior repair, polishing, clear finish
Rear baffle repair, painting, woofer edge replacement, unit detachment)
Accessories: equalizer (MQ104), wall bracket, saran net, instruction manual (English copy), connection cord
Main specifications: 3-way 27 speaker usage unit 3839W impedance 8Ω output sound pressure level 89dB maximum input 300W crossover frequency 250Hz, 1.5kHz approximate installation dimensions W2,700 x H2,150 x D370 mm total weight approx. 144 kg
The price has been drastically reduced. 2024/9/7 sales price 3,000 yen. Woofer for DVD surround system DHT-1000DV. It is a passive type with no high cut or volume features. If you've been looking for one, please take this opportunity. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.5 operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker 16 cm cone type, bass reflex, anti-magnetic design playback frequency band 25 Hz to 240 Hz maximum allowable input 80 W input impedance 6 ohms W270 x H312 x D288 5.9 kg
The disposal price has been reduced (member prices are not applicable). 2024/9/6 sales price 298,000 yen Refreshed and maintained, including woofer edge replacement and exterior repairs! The 4425 Mark 2 model features a compact speaker with a large driver horn. The thick, dynamic, and sticky mid/low range in combination with a 30cm woofer and bi-radial horn is a mid-size speaker that truly embodies JBL (Kojima Yosuke)
Maintenance information: 2024.9.6 maintained (woofer edge replacement driver maintenance (magnetic circuit magnetic fluid removal, gap cleaning, center adjustment) ATT cleaning, exterior repair, cleaned)
Accessories: saran net, jumper plate
Main specifications: 2-way 2 speakers, playback frequency band, 35 Hz to 20 kHz, output sound pressure level, 91 dB, impedance 8 ohms, W409 x H635 x D360 mm (including horn part), weight 25.8 kg/unit
The disposal price has been reduced! (Member prices are not applicable) 2024/9/6 sales price 1,180,000 yen This is an Elac high-end model that will be in stock for the first time at Hi-Fi Hall. It is the successor model to the FS 507VX-JET, and as the name suggests, it reflects the design philosophy of the Concerto Series, where ELAC R&D brings together the best of its technology. Please enjoy the rich low frequencies with plenty of room and the precise and delicate sound played by innovative drivers. There are a few thin threads on the exterior (Tamura Eiji)
Maintenance information: 2024.9.6 sweep test good
Accessories: original box, spike holder, cloth, gloves, instructions, 2 types of rings
Main specifications: 4-way bass reflex crossover frequency 120/400/2,600 Hz frequency characteristics 24-50,000 Hz efficiency 88dB impedance 4Ω input 240W (rated) /300W (maximum) W270 x H1,220 x D380 mm (including spikes) weight 37 kg
The saran net has been replaced, and refreshed and maintained with ATT cleaning, etc. This is JBL's masterpiece monitor speaker 4312A black. It has flat characteristics like a monitor, but you can feel the push and sharpness typical of JBL throughout, and the sense of dynamism in the low frequencies in particular is a JBL sound. This is a perfect middle speaker for jazz and rock. The exterior has also been beautifully finished due to maintenance. Serial 76492 76767 (Murakoshi Yoichi)
Maintenance information: 2024.9.5 maintenance (saran net replacement, frame repair. Network maintenance: frequency characteristic check, ATT cleaning
(Detaching the unit, cleaning the exterior, re-attaching the bass reflex port)
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex impedance, 8 ohms, playback frequency band 45 to 15,000 Hz, W362 x H597 x D298 mm, weight 20 kg/book
A dedicated transformer optimized for the DL-103. The thick, machined body is completely left and right independent to set the transformer, and you can enjoy beautiful, transparent sound in combination with direct wiring from the input terminal to the transformer body. The exterior is dull and there are scratches on the front panel (Takahashi Nobuyuki)
Maintenance information: 2024.9.5 continuity confirmed
Accessories: none
Main specifications: MC transformer boost ratio 1:10 compatible impedance 3 to 40 ohms dimensions W135 x H52 x D102 mm dead weight 1.3 kg
Refreshed and maintained in 2022. One of Japan's leading monitor speakers, which continued to be made over a long period of 23 years from 1974 to 1997. The clear sound image of the Beryllium tweeter+scoker is an straightforward woofer that attractively reproduces the detailed expressions of even the latest recording discs. It is no exaggeration to say that this model is a timeless masterpiece. It has a beautiful finish due to exterior maintenance. *There is no serial sticker on the back and the manufacturer's logo (Oikawa Tetsuji)
Maintenance information: 2024.9.1 operation confirmed
2022.11.10 Maintained (exterior polishing/all coating, no exterior repair required, adhesive removal unit, frame, cone paper coating unit, detachable, LF coil, removed because butyl etc. were attached to the panel on the terminal surface) because butyl etc. were attached to the panel on the terminal surface (original panel parts were missing), but since they were airtight, they were replaced with a new product again after screw hole repair (banana plug compatible product) ATT contact cleaning (butyl attached to one of ATT) (Removed) Perform a frequency characteristic measurement check (~ 42 kHz) and continue using the original capacitor for good results, check the input/output waveform and balance, check the sound output)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
The monitor-like sound is attractive. I have the impression that the low range is more characteristic than the mid to high range (Daiki Goto)
Maintenance information: 2024.8.29 Operation confirmed
Accessories: case, earpads
Main specifications: Inner ear (canal type) Input sensitivity: 124 dB/mW Frequency characteristics: 20 Hz to 18 kHz Impedance: 56 ohms Weight: approx. 15.3 g
The price has been reduced. 2024/8/29 sales price 59,800 yen Maintained! Rare items have arrived. SPARK tubular premain amplifier. It is for line use only. Please enjoy the powerful EL34 push-pull sound (Daiki Goto)
Maintenance information: 2024.8.29 Maintained (terminal contact repair due to poor contact with the drive stage socket. Input volume contact cleaning. Replaced for first-stage vacuum tube replacement (noise sometimes occurs at the residual noise level). Output tube (EL34/6CA7) operation bias check and adjustment (plate voltage 440V30mA setting). Undistorted maximum output and residual noise check. Maximum output 28W/8Ω (1kHz) (15Vrms/8Ω) D.F. Lch: 1.33 Rch: 1.38 Residual noise check 0.8 mV to 1.2 mV. Overall gain 37 dB (approx. 70 times) (28 W output is output at maximum volume when minimum input voltage is 211 mV) frequency bandwidth 5 Hz to 85 kHz (1 W/8 Ω) input impedance Lch: 60 kΩ to 110 kΩ Rch: 60 kΩ to 110 kΩ (Other sound output tests are good)
Accessories: manual, power cable
Main specifications: 6CA7/EL34 push-pull input 2 systems W330 x H185 x D250 mm weight 14.2 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/8/25 sales price 15,000 yen 38cm cone type woofer only 1 uses Alnico magnets for the magnetic circuit. 200Ω high impedance type, reproduces sticky low frequencies. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.8.25 sound output confirmed
Accessories: none
Main specifications: playback frequency band 30Hz to 1.5kHz sound pressure level 106dB input 35W impedance 200Ω, total magnetic flux 435,000 maxwell weight 13.5 kg