The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki)
Accessories: None
Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
I cut the price. 2021/8/30 selling price 49,800 yen rare! Decka's Gramophone Rally is Hi-fidou's first arrival. The turntable is smaller than the board, and the sound has a sense of scale in the UK with a compact body. The atmospheric design, retractable needle case and spring handle are very attractive. Unknown details (Yoichi Murakoshi)
Maintenance information: 2021.8.30 sound confirmed
Accessories: replacement needle
Main specifications: W155 × H280 (350 with the lid open) × D375mm 5.5kg
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
*1 bottle only Speaker stand with unknown details such as manufacturer name and model. There are appearance, abrasions, and dullness (Hitoshi Kobayashi)
Accessories: none
Main specifications: W280 × H270 × D330 mm 4.8 kg (actual measurement)
The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
The disposal price has been reduced. Member discounts are not applicable. 2023/2/5 sales price 2,000 yen. *Currently sold. Specification details of only one Onkyo full range unit are unknown, but it was able to sweep and make sound. The exterior has dirt, dullness, and tape marks (Katsuji Hiura)
Maintenance information: 2023.2.5 sound output confirmed
Accessories: none
Main specifications: diameter 120 mm, depth 71 mm, screw pitch 219 mm (actual measurement), weight 1.2 kg
The price has been reduced. 2023.4.10 Turntable seat with sale price 2,000 yen unknown manufacturer. The material is soft and can be expected to have a vibration suppression effect. The exterior is scratched, dirty, and dull, and there is a feeling of use (Katsutsugu Hiura)
Accessories: none
Main specifications: thickness 4mm
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
The price has been reduced. 2023/11/15 Sales price 8,000 yen Center speaker stand from unknown manufacturer. It is a type that is easy to handle with wooden casters. There are threads on the exterior. (Miura Kimiya)
Accessories: No accessories
Key Specifications: W570 ✕ H225 ✕ D440mm 4kg
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
Unspecified set of 2 wood blocks 30mm square insulator cube It is similar to Yamamoto Sound Crafts's QB-1, but it is smaller than the QB-1 and the details are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Main specifications: W30 x H30 x D30 mm 28.6 g (actual measurement)
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
※Cleaning liquid is out of stock. Directional velvet brush with high cleaning performance A convenient wide type that allows you to wipe records in one go. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: unknown brush
Audio-Technica model number unknown gold-plated conversion jack. The female side is well made, and the manufacturer's logo is also engraved. There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Stereo standard jack extension cable 3.0 m model number unknown, Sony standard jack extension cable Uses OFC wire and gold-plated plugs. How about an extension cable for headphones (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
Empire's unknown replacement needle. Very similar for 909E/X, but details are unknown. Since there is no main unit, operation has not been confirmed. There is a feeling of use (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: none
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/13 sales price 5,000 yen LINN remote control. Details are unknown, but it is similar to EXOTIK and UNIDISK 1.1 remote controls. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.13 operation confirmed (infrared checked)
Accessories: none
A set of 2 seems to be a choke transformer, but the details are unknown. Measured DC resistance value 380/373Ω W31H95 x 44mm 0.31 kg/piece (actual measurement, not including protrusions), only conduction and resistance values have been confirmed by a tester (Kojima Yosuke)
Accessories: none
PSE standard product ACROLINK POWER CONNECTOR Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
HDMI cable, 3.0 m, is an affordable HDMI cable with a wired cord from Amazon Basic. Details will be unknown (Tomoho Asaine)
Maintenance information: 2024.5.3 unchecked
Accessories: none
MiniHDMI to HDMI converter cable 5.0 m Details are unknown, but it is a thin, lightweight cable that is easy to handle. The sheath smells like tobacco (Takahashi Nobuyuki)
Maintenance information: 2024.5.4 unchecked
Accessories: none
4.5 m TOSLINK cable The details of the square type - square type are unknown, but it is a type that is easy to handle when it comes to long cables. The sheath smells like tobacco (Takahashi Nobuyuki)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
S terminal cable 2.0m model number unknown, S terminal cable from Audio-Technica's FINE GOLD series. Uses OFC line. There are many dull stains on plugs and shields (Murakoshi Yoichi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
*Currently sold. Details of only one Sony 15 cm full range unit are unknown, but there is an I-502-437-11 description on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
*Currently sold. Details of Sony's 15 cm full range unit pair are unknown, but there is a description of i-502-437-11 on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
XLR cable 5.0 m male to female details unknown. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
※Whether it is a genuine product is unknown. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
Phono cable 1.2m L-shaped plug to RCA plug self-made phono cable using OYAIDE 102 SSC. The previous owner used it on the FR/FR-54. Details unknown (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
Although the details of the stand are unknown, it is well-made, and it is a silver iron stand.
It has a simple appearance, so it can be used for a variety of purposes. The exterior has noticeable dirt on the bottom plate and support (Mizusaki Ryo)
Accessories: none
Main specifications: height: 625 mm top plate size W145 x D180 mm bottom plate size W250 x D310 mm weight 5 kg/1 bottle