Comes with an acrylic cover. A cartridge keeper that can hold 6 cartridge shells. The clearance is large and easy to handle. There are scratches and dirt on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W200 x H107 x D100 mm weight 450 g (actual measurement)
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
Center speaker stand from unknown manufacturer. It is a type that is easy to handle, with wooden casters. There are threads on the exterior. (MIURA Kimiya)
Accessories: none
Main specifications: W570 ✕ H225 ✕ D440mm 4kg
RCA cable 1.0 m pair 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
*Currently sold. Yamaha superwoofer equipped with a 20 cm x 2 double woofer. Equipped with active servo technology and a 150W high-power amplifier, it plays bass that is small yet full of volume. There is dirt, dirt and dullness on the exterior, and some floating on the bottom. Serial Z117079QS (Tamura Eiji)
Maintenance information: 2024.3.3 sweep test is good
Accessories: No accessories
Main specifications: used unit 20 cm cone type x 2 rated output 150 W (5 ohms) playback frequency band 20 Hz to 160 Hz high cut filter 40 Hz to 140 Hz, continuously variable W235 x H602 x D463 mm 20 kg
A model developed for the digital AV era by applying anti-magnetic treatment to the NS-10M. The clear high frequencies stretch comfortably with less color quality. It is useful for a wide range of applications, such as those who are worried about space and for subsystems. The exterior has scratches, small scratches, and a feeling of use. Serial 104369A, 104369B (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speaker sealed type 8 ohm sound pressure 90 dB W215 x H382 x D199 mm 7.0 kg
※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep check OK
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
The price has been reduced. 2023/8/12 sales price 19,800 yen speaker cable 1.5m pair single (Y lug) single side (Y lag) single side tri-wire (Y lag) specification A parallel arrangement structure that neutralizes and makes the flow of electricity accurate. A high CP cable that is smooth and has a sense of speed. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2023.8.12 Conductivity confirmed
Accessories: no accessories
RCA cable, 0.5 m, pearitz coated OCC copper, has a relatively clean tone, and is a product made by Wireworld that is particular about sound quality while keeping costs down. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
A masterpiece tuner equipped with an 8-channel vari-controller. It was introduced to the world as the first pulse-counting unit developed by Trio ahead of the rest of the world, and it is a model with a reputation for sound quality. You can get a sense of satisfaction just by turning the heavy tuning knob. Serial 530245 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: copy of instruction manual
Main specifications: FM dedicated tuner, equipped with 8 vari-controllers, W440 x H154 x D393 mm, 11.5 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 2172380XCK00186 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 217380XCK00185 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A German stereo power amplifier with resolution and expressiveness not typical of commercial use. It is proud of its exhilarating sound and outstanding driving power that comes out quickly. The exterior has scratches and paint bald spots. Serial 2172380UGD01107 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 85W+85W (8Ω) 150W+150W (4Ω) W483 x H88 x D270 mm 11.5 kg
※It's cheap because of the smell of tobacco and the remote control being out of stock. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. There are scratches and scratches on the exterior. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)) has been performed. (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
The price has been drastically reduced! 2024/4/13 sales price 89,800 yen ※It is cheap because it has a tobacco smell. A network player compatible with Roon Ready and MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. It also plays DSD 22.5 MHz when used as a USBDAC. Since it also has volume, it can also be used as a digital preamp. The exterior has a slight smell of threads and tobacco. Serial 17Y0011 (Fujisawa Yukishi)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cord
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
※It has a cigarette smell, so it's cheap. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. The exterior has dullness, scratches, etc. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)). (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: remote control, power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
The price has been drastically reduced! 2024/4/13 sales price 69,800 yen ※It is cheap because it has a tobacco smell. It is a premain amplifier with a built-in USB DAC compatible with a maximum DSD of 11.2 MHz and PCM384 kHz/32 bit input. Adopts a dual monaural configuration/fully balanced circuit design that inherits the design philosophy of the UD-503. This one is enough, and it's a convenient dish. There are small scratches on the exterior. Serial 1710182 (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cable
Main specifications: 20W+20W (8Ω) impedance 4Ω to 8Ω frequency characteristics 10Hz to 100kHz W290 x J81.2 x D264 mm mass 3.7 kg
※Because it smells like tobacco, it's cheap. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
※Because it smells like tobacco, it's cheap. 2IN/2OUT USB audio interface in the most compact body in the series. In addition to simultaneous microphone and guitar input, it is also compatible with audio applications with RCA line input/output. Serial 1890186 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 simple operation confirmed
Accessories: AC adapter
Main specifications: power consumption 2.5 W 146 x H55 x D120 mm 623 g
A unique structure in which ribbon-shaped conductors using 1.0m pair collet chucks for RCA cables are arranged spirally on the outside of SVPE insulation. As a result, there is no extra cushioning on the positive side and negative side. The resolution is high and the low-frequency expression is excellent. (FUJISAWA KOSHI)
Maintenance information: 2024.4.27 continuity confirmed
Accessories: No accessories
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
The disposal price has been reduced! (Member prices are not applicable) 2024/3/7 sales price 79,800 yen Maintained! 120V specification SUMO control amplifier hosted by amplifier design genius James Bongiorno. Compared to amplifiers from the GAS era, the sound is cleaner, but the elastic low frequency bounce method is still alive and well. It is one that uses toroidal transformers and high quality parts, and makes you feel that they are particular about it. On the exterior, abrasions and line scratches are conspicuous on the top plate. Serial H (Yonejima Satoshi)
Maintenance information: 2024.3.25 Maintained (Earth float re-corrected. (*Since it is AC120 specification, a hum sound may occur at 100V)
2024.3.7 Maintained (internal inspection check, PHONO changeover SW, INPUT/TAPE changeover SW cleaning. Transistors, resistors, and capacitors can be checked. Operation check)
Accessories: No accessories
Main specifications: 6 inputs, 2 PRE OUT terminals, W480 x H40 x D220 mm, weight 8.0 kg
Fully maintained, including woofer edge replacement and exterior repairs! A rare model is in stock. British Spendall SP100 derived from the German national broadcast monitor. It goes great with classical music, from symphonies to chamber music, as well as European jazz. The elegant expression unique to European models is fascinating. Serial 3918, 3919 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 maintained (exterior repair/polishing/clear finish, saran net replacement, woofer edge replacement, mid edge replacement, all internal faston terminals replaced)
Accessories: saran net, jumper plate
Main specifications: 3-way bass reflex type 8Ω frequency characteristics 45 to 20 kHz 100W W370 x H700 x D430 mm 36 kg
When connected to a speaker, it reduces speaker impedance fluctuations in the mid to high range. More faithful speaker driving is possible, speaker resolution and stand-up are improved, and natural afterglow is also reproduced. There are scratches on the exterior. Serial 00753, 00754 (Fujisawa Yukishi)
Accessories: instruction manual, original box
Main specifications: W100 x H47 x D117 mm approx. 190 g/piece
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
Maintained! It is a control amplifier that shines with a good sense of design such as the meter on the front panel. The sound quality makes you feel calm and natural. Recommended for those with high phono input quality and listening to records. As for the exterior, there is rust on the top plate. Serial 200655 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 Maintained (micro relay and resistor replacement, diode replacement. MONITOR lever SW replacement, volume VOL exchange Other head amplifier transistor deterioration replacement, power supply resistance, capacitor replacement, application of polishing grease to each other SW disassembly contact, confirmation of sound output for each input/output connection)
Accessories: No accessories
Main specifications: phono input: 2 systems (MC head amplifier built into PHONO1) W430 x H170 x D320 mm weight 11.2 kg
This model is specialized for 3009S2 light needle pressure and has narrowed down applications. The sharpened, sharp followability is attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. Serial 182902 (Fujisawa Yukishi)
Maintenance information: 2024.3.1 continuity confirmed
Accessories: phono cable
Main specifications: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g
Internal and external maintenance completed in April 2023! The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound. There are line scratches and some chips on the exterior. Serial 58110513, 58110531 (Yonejima Satoshi)
Maintenance Information: 2023.4.1 Maintained (enclosure polishing, oil/wax painting. baffle paint. Lattice repair/polishing/painting, lining replacement. Unit maintenance (edge replacement. (Corn paper coating) Unit detachable)
Accessories: saran net
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
SAEC long-selling model with a 0.6 m digital cable. 6N ultra-high purity copper with excellent transmission characteristics is used as the conductor material, and transmission loss is reduced with accurate impedance matching (Tamura Eiji)
Maintenance information: 2024.4.4 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/23 sales price 118,000 yen This is a Rotel premain amplifier with a built-in D/A converter. It comfortably sounds modern sources with delicate and highly transparent sound quality. It is a convenient product that can also be used for high quality playback for display, with a wide selection of 3 types and 6 systems of D/A inputs. Serial 702-3421046 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: built-in D/A converter (optical coaxial USB) rated output 120W+120W W431 x H150 x D350 mm weight 13.7 kg
※Since it is cheap, it will be handed over as is. 1 bottle only 25cm full range speaker made by RCA in the USA. The Alnico magnet responds well and the sound is easy to remove. There are repair marks on the edge (Tamura Eiji)
Maintenance information: 2024.3.22 sweep test good
Accessories: No accessories
Key Specifications: Unit Diameter 25cm 8Ω Fixed Edge
It is a model designed to further enhance the results of the regular type, with the main focus on thoroughly eliminating sound quality deterioration factors such as mechanical vibration and electrical vibration. 4-tier rack for analog players with decoupler The exterior has dullness and scratches (Satoshi Yonejima)
Accessories: No accessories
Main specifications: shelf size/1st tier 160mm/ 2nd tier 180mm/ 3rd tier 60mm W600 ✕ H540 ✕ D475mm 8.8 kg
Quadra 180mm pole set of 4 The neck is curved rather than straight. There is oxidation on the exterior (Tamura Eiji)
Accessories: head part of the head
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Yonejima Satoshi)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole
※The pole size is 32 mm in diameter, but the casters are inexpensive because they are 19 mm in diameter. Quadraspires 4-tier rack. In addition to excellent design, the structure based on theory is also attractive, as the shelf board has sufficient rigidity even though it has a simple structure, and is subtly curved and cut so that vibration components gather at the four corners. The exterior is dirty and dull (Yonejima Satoshi)
Accessories: casters
Main specifications: W588 x H515 x D395 mm (actual measurement) 1st stage 100 mm, 2nd stage 140 mm, 3rd stage 180 mm 12 kg (actual measurement)
The price has been reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 62226 (Yonejima Satoshi)
Maintenance Information: 2024.3.25 Maintained (INPUT DIN 4P replacement, internal Tr, C, R all checks. DIN4P-RCA female cable created. Operation check, pattern solder processing)
Accessories: power cable, connection cable
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/27 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. On the exterior, there are scuffs scattered on the top surface, and many other small scratches can be seen. Serial 22063 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (INPUT DIN connector replaced, DW4P-RCA female cable created. All internal checks. Lch power stage Tr x 3, DC cut C, gain setting C exchange. AC line fuse installation. Operation check)
Accessories: power cord, connection cord
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg