DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
Speaker cable 1.4+2.9 m pair end This is a well-balanced speaker cable, from powerful, unprocessed bass to delicate light sounds. There is a feeling of use such as dirt (Asae Tomoho)
Maintenance information: 2024.4.19 continuity confirmed
Accessories: none
Digital cable 1.5m DENON LINK cable This is a dedicated cable that maximizes the performance of the high-purity copper high definition digital audio interface DENON LINK. Stable high quality digital transmission without being affected by the surrounding environment has been achieved by thoroughly eliminating vibrations from the plug and shield (Tamura Eiji)
Accessories: original box, instruction manual
The stylus is good, but since the cantilever is curved, it is inexpensive. A mono-only cartridge with a traditional 33 series body. Play mono records clearly with a pick-up that is only horizontally oriented. It has vertical compliance and is optimized for recurrent mono editions in the stereoca era. The range is wider than Denon's DL-102 and you can feel the expansion (Fujisawa Yukishi)
Maintenance information: 2023.8.29 Operation confirmed
Accessories: needle cover
Main specifications: MC type needle pressure 2.3 to 2.7 g (2.5 g standard) Muku round needle high hardness duralumin cantilever PCOCC coil anti-vibration rubber “honeynight” impedance 10 ohms 6.9 g
A limited edition model commemorating the 15th anniversary of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. The exterior is scratched, dull, and has a feeling of use (Katsuji Hiura)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: none
Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2023.12.18 operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
※Overall, there is dullness, rust, and scratches, and there is a feeling of use, so it is inexpensive. A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. (MIZUSAKI Ryo)
Maintenance information: 2024.1.27 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2024.3.30 Operation confirmed
Accessories: manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A classic MC boost transformer. With 2 input systems, impedance can be switched to 3.40 ohms, and comes with a PASS line, you can freely enjoy various cartridges and tone arms (Takasaki Atsushi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Unopened Replacement needle for Columbia/Denon cartridge, PU-1270, PU-1280, SPC-310 It is unchecked for replacement needle only. (Hitoshi Kobayashi)
Accessories: case
The price has been reduced! 2024/4/21 sales price 12,000 yen DENON tonearm DA-401 exclusive headshell. They rarely appear separately, so if you are looking for one, please take this opportunity (Tomoho Asaine)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: dead weight 4 g
Although it is a standard model, you can perform SACD playback that is not inferior to higher-level models, and you can clearly experience glossy sound in the mid and low frequencies typical of Denon. Dullness can be seen throughout, but there are no noticeable scratches. Serial 8051508325 (Fujisawa Yukishi)
Maintenance information: 2024.3.31 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: CD/SACD compatible AL24 Processing playback frequency band 2Hz to 100kHz (SACD) 2Hz to 20kHz (CD) SNR 104dB (SACD) 110dB (CD) W434 × H135 × D331mm 7.6 kg
CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There are scratches on the exterior, front panel, and top plate, overall dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.27 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
Maintained by the manufacturer! This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. There are multiple scratches on the top plate. The LCD is slightly dark (Sasaki Shota)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test)
Accessories: remote control, copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Denon's SACD player. It is a standard model equipped with the Advance AL32 Processor, the latest version of Denon's Alpha processing technology, and has generously introduced the latest technology. You can fully enjoy the depth of the sound, and the SN has been further improved compared to the previous model. There are small scratches on the exterior. Serial 3081502128 (Jun Tamai)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: Remote control* instruction manual in preparation, power cable
Main specifications: SACD compatible analog audio output/optical digital output x 1, coaxial digital output x 1 optical digital input x 1 USB (TypeB) x 1 USB (TypeA) x 1 D/A converter compatible sampling frequency 32 to 192 kHz size W434 x H138 x D335 mm weight 13.7 kg
The price has been reduced! 2024/4/27 sales price 23,000 yen This is a standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Asaine Tomoho)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: case, needle cover, instruction manual
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
Beautiful item with original box! DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. The exterior has a feeling of use such as dullness. Serial 1226 (Tomoho Asaine)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
MM type cartridge developed based on the DL-107. The magnet has a 1-point support structure using a disc-shaped magnet. A special elliptical needle is used at the tip of the needle, and it makes a smooth sound with excellent high frequency characteristics. There is corrosion on the cantilever serial 1820 (Kanai Hidetsugu)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: needle cover
Main specifications: mm type output voltage 3 mV applicable needle pressure 1.5 to 2.1 g (1.8 g suitable) special elliptical needle frequency characteristics: 20 Hz to 50 kHz dead weight approx. 7.5 g
Comes with original box! High compliance MC cartridges. It boasts a wide range playback capability of 60 kHz, and its sharp, energetic sound is suitable for jazz rock. The sound quality is bright and crisp, with good low frequency resolution. The exterior is dull. Serial 9700 (Yonejima Satoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: solid diamond special elliptical needle playback frequency range 20 Hz to 60 kHz voltage 0.4 mV impedance 33 Ω needle tip 0.07 x 0.14 mm square needle pressure 1.4 g dead weight 6 g
※It is cheap because it is in poor condition. Denon's MC cartridge used to be an introduction machine. The sound quality has a sense of transparency that extends smoothly from low to high frequencies without clogging. The famous DL-103 Yuzuri cartridge has a good balance of range, density, and volume. In addition to being dull on the exterior, there is a feeling of use such as the part number plate peeling off. Serial 6984 (Hiroki Aso)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.3 mV internal impedance 40 ohms needle pressure 1.5 to 2.1 g special elliptical needle double structure tapered cantilever dead weight 4.5 g
The price has been drastically reduced! 2024/4/28 sales price 198,000 yen in stock from Hi-Fi! Play various digital sound sources such as music streaming services, internet radios, AirPlay 2, Bluetooth, and USB memory devices via the internet easily and with high sound quality. Also, it is equipped with an HDMI terminal that allows you to enjoy TV sound, so you can enjoy music and TV with different dimensions of high sound quality. The exterior has a feeling of use such as dullness. Serial DBYC052300218 (Tomoho Asaine)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: remote control instruction manual, power cord, antenna
Main Specifications: Compatible File Formats WMA/MP3/WAV/MPEG-4 AAC/FLAC/ALAC/DSD/PCM Sampling Frequency WMA/MP3/MPEG-4 AAC 48kHz WAV/FLAC/ALAC 192 kHz PCM 384 kHz Bluetooth Ver. 5.0 /Class1 Size 434x107x421mm Weight 9.7 kg
*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. The exterior is dull and has scratches. Serial 8043308382 (Yonejima Satoshi)
Maintenance information: 2024.1.4 operation confirmed
Accessories: No accessories
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H ✕ D370 mm, weight 2.9 kg
*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. There are scratches on the exterior. Serial 0063373998 (Tamura Eiji)
Maintenance information: 2023.12.8 operation confirmed
Accessories: none
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H97 ✕ D370 mm, weight 2.9 kg
The price has been reduced. 2024/3/26 sales price 29,800 yen 2022 manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. You can see a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2022.11.5 manufacturer maintained (all defective transistors replaced. Earth wire installation operation test)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 39,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
Maintained by Denon Service! This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine (Sasaki Shota)
Maintenance information: 2024.4.26 manufacturer maintained (13 deteriorated TRs replaced. speed adjustment, sound output test)
Accessories: copy of the manual
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg
This is a genuine shell that comes with the DP-1300M/DP-500M. Black model with meat removal processing. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Maintained! A system equipped with DENON's highest-model phono motor DP-80 at the time and DA-401 tonearm mounted on a genuine cabinet DK-300. You can enjoy music slowly with stable operation by combining the DP-80, which incorporates plenty of advanced technology from the time, such as a dual-structure turntable and AC servo motors, and the DA-401, which prevents the needle from being violently touched by the influence of record boards by reducing weight. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 118435 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (TR replacement normal/variable SW repair power capacitor replacement speed adjustment sound output test)
Accessories: copy of the dedicated shell instruction manual
Main specifications: DP-80 quartz lock direct drive outer rotor 3-phase AC servo motor, double structure, aluminum die-cast turntable, compatible with 33/45 rotations, DK300 dimensions W550 x H190 x D470 mm, DA401 static balance type, effective length 244 mm, needle pressure range 0 to 2 g, total weight approx. 24 kg
Unspecified mmType cartridge. It's very similar to the cartridge that comes with the DENON DP-500M. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7g
Denon's classic shell. This is a genuine DA-305 shell. There is also plenty of room around the lead wire, and various cartridges can be attached. There is a feeling of use on the exterior such as small scratches and dullness (Tamai Jun)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: dead weight 7g
The price has been reduced! 2024/4/20 sales price 39,800 yen maintenance completed item! It looks like a Class A amplifier, and an unmistakable sound pops out from the moment it starts up. Furthermore, it is an attractive car with a glossy high range and a mellow mid range, making the whole sound brighter. The exterior has small scratches and dullness over time. ※The side panel is missing. Serial 308241173 (Yamato Yuki)
Maintenance information: 2023.11.13 maintained (main board solder repair PHONO earth terminal replacement speaker relay deterioration replacement RECOUT selector SW disassembly contact grease coating speaker switching SW disassembly contact cleaning idling adjustment sound output confirmation for each input/output connection)
(Explanation of specifications) There is rattling in the volume knob, but it is not a malfunction due to structural rattling
Accessories: copy of instruction manual
Main specifications: output level 90W+90W, medium output, pure A class, high output, non-switching, class A operation, phono MM/MC switching, dimensions W470 x H167 x D400 mm, weight 12 kg