The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
※Since there are 3 missing corners, it is inexpensive. Sorbothane Square Insulators, Set of 4, Black Type When vibration is cut with sorbocaine, a phenomenon occurs where low frequencies clearly and dynamically come out of the speaker itself. The exterior is dull, etc., and there is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: size 30 mm square height 10 mm
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Disposal prices have been reduced. Member discounts are not applicable. 2021/4/10 sales price 2,000 yen. Remote cable 2.0m A remote cable that can synchronize the power switch between the company's control amplifier 035 and the power amplifier 036. It is connected from DC-OUT of 035 to DC-IN of 036 and works in conjunction with 035 operation. (Kondo Hirotsugu)
Maintenance information: 2021.4.4 Linkage confirmed by the company 035 and 036
Accessories: none
The price has been reduced! 2024/4/25 sales price 118,000 yen ※The horn part and equalizer part have been replaced with brass ones. Comes with a horseshoe ring! 16 ohm specification A straight, carefree, and linear sound. It's great for applying sharp, edgy cymbal sounds and attack sounds. The impression is that the density has increased compared to the 8 ohm specification. The back plate is missing. The exterior has slight paint baldness and oxidation. (YONEJIMA Satoshi)
Maintenance information: 2024.4.25 Maintained (Fram pull-out wire disconnection repair (only repair only the fault location because the Fram drawer line is thin) Fram cleaning. DCR (? /6.5 ohm diaphragm no scratch) DCR (40886/6.6ohm diaphragm no scratch)
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
*Currently sold. The best-selling 101 series AV compatible model. With 1 full range unit, you can hear unexpected sounds. This is a cost-effective speaker that is ideal for subsystems, including ease of placement. There are scuff marks and dirt marks on the exterior. Serial 018463/018464 (Watanabe Tadashi)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 11.5cm full range driver (anti-magnetic type) playback frequency band 70Hz to 17,000 Hz 6Ω W232 x H154 x D152 mm 2.1 kg
The price has been reduced! 2024/4/22 sales price 36,800 yen Quad bookshelf type speaker with a mirror finish that exudes a sense of luxury. It has wide bandwidth and cuts while retaining shadows unique to European speakers, and plays jazz and rock with rich musicality. The exterior has a feeling of use over time, such as dullness and scratches. ※This is a general-purpose jumper cable (Hiroki Aso)
Maintenance information: 2024.4.22 sound output checked (good sweep test)
Accessories: Saran net jumper cable (general purpose)
Main specifications: 2 way rear W bass reflex bookshelf type 6Ω 86db frequency characteristics 45 to 43 kHz W190 x H330 x D265 mm 6.0 kg
The price has been reduced. 2020/5/26 Sales price 29,800 yen Probably a 1 inch horn made by Raft Craft. When checked on the painted part, it is made of FRP-like material, and it is lightweight for its size, and can be carried by one man alone. The screw hole has holes for both ALTEC and JBL. There are many usability, dullness, scratches, paint peeling, etc. (Yoichi Murakoshi)
Accessories: None
Main specifications: Measured outer diameter dimensions approx. W835 × H250 × D835 mm Actual measured weight approx. 20.4 kg
The price has been drastically reduced. 2024/2/12 sales price 89,800 yen ※It has been replaced with a non-genuine edge. You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are viscoid sagging marks (Oikawa Tetsuji)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/20 sales price 198,000 yen ※It is cheap because there is dirt, cigarette smell, and part of the stay is broken. Comes with stand 2505! 2 inch horn+ lens with huge slant plate. As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. The exterior has line scratches and paint peeling. Serial 17862, 18641 (Fujisawa Yukishi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
The price has been drastically reduced! 2024/3/17 sales price 69,800 yen JBL professional tweeter. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. The exterior has dullness and small scratches due to aging. Serial 81380/52416 (Yonejima Satoshi)
Maintenance information: 2024.3.17 sweep test good
Accessories: No accessories
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
※1 bottle only. Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance with various woofers and tweeters (Daiki Goto)
Maintenance information: 2024.4.23 Maintained (diaphragm installation adjustment, replacement of the following parts. DCR (54871, 5.7 ohm diaphragm, no scratches)
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/22 sales price 148,000 yen Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. The paint is peeling off. Serial 32769, 32799 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 maintained (diaphragm installation adjustment, pad dampener replacement)
Accessories: No accessories
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 79,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 53400 63923 (Tomonori Asaine)
Maintenance information: 2023.12.15 Maintained (diaphragm installation adjustment throat cleaning DCR 63923/8,3 ohm, no vibration damage
(DCR 53400/7.8Ω vibration has scratches and small dents)
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
※The nail on the needle cover is broken, so it cannot be locked. This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/1 sales price 298,000 yen Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
The price has been drastically reduced. 2024/4/19 sales price 698,000 yen Maintained in 2023! Hammer tone BBC specification! Strobe platter included! This is a combination of GARRARD 301 and SME 3009S2, which has an attractive gripping, and gutsy sound. The high sensitivity short arm with high utility and the sound produced from the idler turntable is exhilarating and very comfortable. It is a record player system that allows you to experience the true essence of analog. Since the shaft on the back of the motor is long, an Audio-Technica insulator is included. *Currently, the pulley is 60 Hz, but the strobe platter is for 50 Hz (Murakoshi Yoichi)
Maintenance information: 2023.8.15 maintenance (motor disassembly/check, lubrication, assembly. Main bearing disassembly, cleaning, oil injection, oil sealant application, assembly. Overall cleaning. idler cleaning. Motor suspension spring rubber replacement. Transport plate fixing clip. Linguage distortion correction. Noise suppressor rebuild replacement. Mount rubber washer added. 50Hz pulley adjustment added. SME3009S2 cleaning. Mount grommet replacement Contact cleaning. (Running test)
Accessories: insulator (audio technica AT616)
Main specifications: 301: idler drive 33, 45, 78 rotations compatible 3009S2: short arm static balance type, total length 265 mm, overhang 15 mm, needle pressure (when 1 rider weight is attached) 1 memory 0.25 g step 0 g to maximum 2.5 g (when 2 rider weights are attached) 1 memory 0.5 step 0 g to maximum 5 g cartridge dead weight up to 28 g size W480 x D406 x H238 mm weight 12.5 kg
Maintained! A network with a crossover frequency of 7 kHz. It is ideal for MID/HIGH for 3-way systems using 2440. There is a small wound (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Main specifications: crossover frequency 7 kHz, allowable input (continuous program), 50 W impedance, bass range: 12 to 16 ohms, treble range: 12 to 16 ohms, treble attenuation/variable volume, mounting hole W140 x 108 mm 0.7 kg
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
※Since it is cheap, it will be handed over as is. An attractive subwoofer with a tight, speedy bass range based on time domain theory. The sound that emits 360 degrees is a convenient item with a high degree of freedom of installation. There are scratches on the exterior. Serial Z0C00005 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: instruction manual, power cable, original box
Main specifications: 16 cm subwoofer 16 cm (dual voice coil unit) playback frequency band 40 Hz to 200 Hz rated output 30 W x 2 crossover 40 Hz to 200 Hz (continuously variable) power consumption 46 W size W236 x H354 x D301 mm mass 16.2 kg
The disposal price has been reduced. Member prices are not applicable. 2024/1/18 sales price 118,000 yen Maintained! QUAD's first transistor preamp. The deep sound image and the impression that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier. Of course, it's a combination with the 303, and the sound doesn't feel out of place even when paired with a vacuum tube power amplifier. BAL knobs are worn out (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (front push button contact failure → cleaning, PHONO/LINE in-board coupling capacitor replacement. AC spark killer capacitor broken → replaced, each VOL cleaned, power cable created)
Accessories: copy of instruction manual
Main specifications: external dimensions W550 x H110 x D220 mm, weight approx. 7.4 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
The disposal price has been reduced. Member discounts are not applicable. 2024/1/18 sales price 118,000 yen Maintained! Quad first-generation transistor preamp. It's a car that makes more noise than its size, and you can enjoy a variety of expressions with expressive power rich in shadows. When combined with the company's 303, etc., it has a thick, dark tone and calm elegance. You can enjoy classical and acoustic sounds with glossy tones. There is a feeling of use such as small scratches. Serial 105591 (Takasaki Atsushi)
Maintenance information: 2024.1.17 maintained (internal internal board coupling C, bypass C, etc. replaced, front button contacts all cleaned, each VOL cleaned, DIN cable 3 created) 2014.12.1 maintained (capacitor replaced. Selector switch contact cleaning. (Input/output DIN terminal pin replacement)
Accessories: 5 PINDIN → RCA cable x 2, 4 PINDIN → RCA female x 1, power cable, copy of instruction manual
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
An enclosure that seems to be for Sansui's old system component speakers. The lattice box with legs reminiscent of JBL's Baron and Bicount is really fashionable. The lattice on both the left and right is out of the frame. There are traces of internal remodeling (Fujisawa Koshi)
Accessories: None
Main specifications: opening diameter 212mm (screw pitch 240mm), aperture diameter 110mm (countertop 170mm, screw pitch 140mm), opening diameter 95mm (for bass reflex port/wood screw pitch 118mm), aperture diameter 70mm (Countertop 92mm, Screw Pitch 104mm) 14mm Particle Board, Veneer Finish W500 × H665 × D430mm 15kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/19 sales price 178,000 yen Maintained. A rare Fisher tube control amplifier. The 2 phono inputs are attractive. The high range is decent, but the round, rich, and powerful mid-range is unique to FISHER. The sound is light, bright and friendly. *Only CHANNEL A is valid for EQUALIZATION LP and 78 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (re-strengthening treatment for all selector knobs (*Please do not remove them as much as possible.) Volume disassembly grease up treatment for BASS, main volume disassembly, cleaning and repair (due to the structure, there are some gang errors and sound leaks when narrowed down to a minimum. (If you are concerned, only RIAA 1 and AUX1 can be adjusted with LEVEL SET on the top surface.) Electrolytic capacitor 1000 μF replacement, vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2021.5.15 maintained (repair of poor contact with various parts, correction of lever deformation points, replacement of 30/30/10/10 μF defects, vacuum tube socket and RCA jack caulk repair ※ Since the main volume is a special type with a loudness terminal, some gang errors will occur after 12:00. AUX1 and PHONO can be fine-tuned with the LEVEL SET on the top. *Other operation checks have been made (4 vacuum tube shield cases are missing)
Accessories: Service Manual (English)
Main specifications: Vacuum tube 12AX7, 12AT7, 6V4 using PHONO2 system Dimensions W390 x H120 x D210 mm 6.6 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/27 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. On the exterior, there are scuffs scattered on the top surface, and many other small scratches can be seen. Serial 22063 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (INPUT DIN connector replaced, DW4P-RCA female cable created. All internal checks. Lch power stage Tr x 3, DC cut C, gain setting C exchange. AC line fuse installation. Operation check)
Accessories: power cord, connection cord
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/3/22 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. The exterior has a feeling of use such as dullness. Serial 41000 (Tomoho Asaine)
Maintenance Information: 2024.3.22 Maintained! (Internal check DC cut C, gain setting C, etc., exchange Tr, etc. check operation check, DIN4P-RCA female cable creation)
Accessories: power cable
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The disposal price has been reduced. Member prices are not applicable. 2024/3/21 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. The exterior has a feeling of use appropriate for the model year, such as line scratches on the top plate, rubber footprints, and overall dullness (Mizusaki Ryo)
Maintenance information: 2024.3.21 maintained (internal Tn, C, R check, Tn OK, gain setting C, DC cut C, etc. → replacement, DINININPUT connector replacement, cable creation ~ operation check)
Accessories: power cord, connection cord, copy of instruction manual
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/20 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. You can see a feeling of use such as appearance, dullness, abrasions, scratches, stains, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 maintenance (DIN connector replacement, resistance in both other channels, capacitor replacement, each Tr all check)
Accessories: connection cable, power cable, instruction manual (copy)
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
All units have been overhauled, including the woofer, mid, driver and tweeter, and network! It is an individual that has been fully restored, including the exterior. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/gray paint. Front and rear baffle repair and painting. Saran net replacement/frame repair. Woofer maintenance: edge replacement, corn paper coating. Midmaintenance: edge replacement, corn paper coating. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, switching SW contact cleaning, high frequency capacitor replacement)
Accessories: none
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Full maintenance from exterior to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 maintenance (exterior (repair, polishing, oil finish, front and rear baffle repair, painting, saran net replacement, frame repair) woofer maintenance (edge replacement, cone paper coating) midmaintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit rust removal, center adjustment, sound-absorbing material replacement, terminal contact cleaning) tweeter maintenance (horn disassembly and cleaning, Magnetic circuit rust removal, gap cleaning, terminal contact cleaning) network maintenance (frequency characteristic check, ATT cleaning, terminal cleaning) defuser repair)
Accessories: saran net diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
The price has been drastically reduced. 2024/4/17 sales price 128,000 yen Maintained! Quad control amplifier The famous machine 44 has been refreshed by changing the back terminal to an RCA specification that is easy to handle. It's a perfect balance between freshness and richness. When paired with speakers made in England, you can enjoy a calm, high-quality sound (Daiki Goto)
Maintenance information: 2024.4.17 maintained (internal all checks, B-filter capacitor deterioration, +- 18V drive Tr leak large, rectifier diode failure instability → replacement power SW spark killer broken → replacement. C and R checks within each board. *There is a sound leak at main volume 0. (Create 2 1.5m DIN5 cables)
Accessories: copy of instruction manual, power cable, connection cable
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
The price has been drastically reduced. 2024/4/22 sales price 128,000 yen Maintained! A famous machine 44 with an easy-to-handle RCA terminal added to the rear terminal of the Quad control amplifier. The British QUAD's small preamp is a perfect balance between the freshness and richness of character. You can enjoy a calm, high-quality sound when paired with the same speakers made in England (Murakoshi Yoichi)
Maintenance information: 2024.4.18 maintenance (internal all checks, power supply filter C ± B bypass C replacement, balance VOL cut off sound → cleaning, check each board)
Accessories: 2 DIN input cords, power cord, instruction manual (copy)
Main specifications: 2 LINE inputs, 2 TAPE2 systems (DIN input or more), 1 PHONO input system, Phono sensitivity 1m/3m/10mV switching W321 x H103 x D203 mm 4 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/11/30 Sales price 128,000 yen Maintenance completed! A famous machine 44 with an easy-to-handle RCA terminal added to the rear terminal of the Quad control amplifier. The British QUAD's small preamp is a perfect balance between freshness and intensity of character. When paired with the same speakers made in England, you can enjoy a calm, high-quality sound. Personally, I recommend the combination with QUAD405. *There is a slight sound leak even when the volume is reduced due to initial type specifications. The RADIO next to the back input DISC is the AUX input (Murakoshi Yoichi)
Maintenance information: 2023.11.29 maintenance (balance VOL, filter VOL, each rotor legal → oil cleaning, no AC switch spark killer → installation, tantalum C replacement in each board, power supply filter C replacement, input cable DW5P creation.)
Accessories: DIN cable, power cord, instruction manual (copy)
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
※It has been repainted and is inexpensive because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: screws
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! An original product. A floor-type enclosure that uses a rear loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine)
Accessories: MA15 woofer grill net
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
4530BK made by Shinkosha. Since there are many chips and scratches throughout, it is inexpensive. The D130 was mounted. Woofer with MA15 fastener! Powerful bass reproduction far exceeding size is possible with the rear loading horn type enclosure (Sasaki Shota)
Accessories: MA15
Main specifications: screw pitch 420 mm hole diameter 360 mm plate thickness 40 mm front baffle plate thickness 22 mm W600 x H1250 x D600 mm 56.3 kg (all measured)
The disposal price has been reduced! Member prices are not applicable. 2022/7/16 selling price 100,000 yen wooden 46cm double woofer type. Baffle opening diameter 425mm Screw pitch 490mm Baffle and enclosure plate thickness 24mm Duct opening diameter 108mm Both the front and back plates cannot be removed. There is a difference in discoloration on the left and right in appearance, and there are corner chips, digging scratches, and dirt stains. (Yutaka Takimoto)
Accessories: none
Main specifications: W1600 × H950 × D850 mm (actual measurement) The weight has not been measured, but it seems that it is 100 kg or more.
The price has been reduced. 2024/2/20 sales price 49,800 yen 2-way bookshelf speaker system. It's the most compact speaker in the company's 600 series, yet it's second to none in terms of power and accuracy due to the new separate double dome tweeter and design improvements. It is in good condition (Sasaki Shota)
Maintenance information: 2024.2.20 sweep test good
Accessories: none
Main specifications: playback frequency 54 Hz to 50 kHz efficiency 85 dB impedance 8 ohm crossover 4 kHz dimensions W160 x H315 x D229 mm weight 4.6 kg
1 bottle of side-heat beam tube, made in France, smoke measurement value 42 (rejection value 25), replacement box included, printing is missing ※ the measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Speaker cable 0.7 m pair with unprocessed 6N stress-free cable and electromagnetic wave absorption non-magnetic thread. This cable has a natural, smooth sound quality with a wide range, and does not choose a genre (Ryo Mizusaki)
Accessories: none
Only one speaker cable, 1.8 m, untreated 6N copper at the end, is stress-free, and has straightforward sound quality. Although it is a thick cable, it is flexible and easy to handle (Daiki Goto)
Maintenance information: 2024.3.4 confirmed
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none