S-video cable, 1.0 m, 7N copper conductor, 24 gold plated, large S terminal, 75 ohm. Cable that uses high-purity copper as conductor to reduce noise, go for those looking for a high quality S-video cable (Asaine Tomoho)
Accessories: none
※No back plate, only 1. Self-made Sherwood enclosure. If you've been looking for this size, take this opportunity. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: aperture diameter 278 mm screw pitch 300 mm (diagonal) W605 x H700 x D495 mm 20.4 kg
1 bottle only. JENSEN RP103 horn Tweeter is not included. If you've been looking for one, take this opportunity. In addition to the exterior and drilling process, you can also see a feeling of use such as dullness, scuffs, paint peeling, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Throat diameter 94 mm, screw pitch, 75 mm, W185 x H80 x D125 mm, 0.6 kg (actual measurement)
If you are looking for an RCA Y splitter cable 1.0m RCA1-RCA2, please take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.5.23 Continuity confirmed
Accessories: none
The disposal price has been reduced! Member prices are not applicable. 2026/2/4 sales price 7,000 yen unused item. This headphone connector is used for the Sennheiser HD800 4pin balance compatible headphone cable IHP-35H-4XLR. If you're looking for one, don't miss it. There is some damage to the box. (FUJISAWA KOSHI)
Accessories: original box
Key Specifications: Non-magnetic rhodium plating
The disposal price has been reduced! Member prices are not applicable. 2026/2/4 sales price 7,000 yen unused item. This headphone connector is used for the Sennheiser HD800 4pin balance compatible headphone cable IHP-35H-4XLR. If you're looking for one, don't miss it. There is some damage to the box. (FUJISAWA KOSHI)
Accessories: original box
Key Specifications: Non-magnetic rhodium plating
The price has been drastically reduced. 2026/4/29 sales price 148,000 yen Every detail has been maintained, such as replacing 13 transistors, 36 capacitors, and 4 adjustment volumes, switching and volume disassembly, contact polishing, etc.! Transistor type pre-main that looks just like the SQ38F. It has a crisp sound with firmness in the mid-range while retaining a sweet luxe stone vibe, and is recommended for both TANNOY and old JBL. The cabinet has also been repaired and finished beautifully (Oikawa Tetsuji)
Maintenance information: 2026.4.8 Maintained (switch and volume class disassembly contact polishing. I/O pin jack polish Replace 8 deteriorated transistors and 18 capacitors in the tone control circuit. Main amplifier circuit idling current adjustment volume replacement, cabinet repair)
Accessories: none
Main specifications: 50W+50W line input, 3 phono (mm) systems, 2 systems, pre/power separable, W476 x D275 x H180 mm, 13.6 kg
Overhauled by Electri, including replacement of deteriorated capacitors! A 1995 reprint model of the famous MC275. The output tubes are GE 6550A, and the first stage tubes are all arranged with Mcintosh balls. It is a model that stands out for its good SNR feel, improved fine particle feel, etc., and its depth of pocket is attractive, compatible with the latest sources. The heavy, vintage look is also great. * There is a description in the manufacturer's repair statement that 1 KT88 was replaced, but since the other 3 were GE 6550, the KT88 was removed and unified. There is dullness on the surface of the body (Kojima Yosuke)
Maintenance information: Maintained by 2026.4.30 Electric (output tube 6550A x 1, 12AT7 x 4, 2 resistors, multi-section CAN capacitors, 6 cathode capacitor meters replaced, and other inspections, measurements, and cleaning)
Accessories: instruction manual, repair statement
Main specifications: KT88 push-pull (GE 6550A x 4) 2 input systems (XLR/RCA) rated output 75W+75W (4/8/16Ω) mono 150W (2/4/8Ω) W406 x H190 x D305 mm weight 30.5 kg
Comes with original box! Easy to use needle pressure gauge with specs. It is a type that adjusts needle pressure by looking at bubbles with a level, and it is possible to measure up to 3 g (Matsumoto Tsuyoshi)
Accessories: original box
Main specifications: Zero-point balance structure one-point support type needle pressure gauge
This is a 2-pole cable connector with a cable diameter of 6 mm to 12 mm compatible with NEUTRIK's speakon plug pairs. If you've been looking for one, please take this opportunity. Inside, there is a feeling of use. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: main body: total length 85mm diameter 25m
This is a 2-pole cable connector with a cable diameter of 6 mm to 12 mm compatible with NEUTRIK's speakon plug pairs. If you've been looking for one, please take this opportunity. Inside, there is a feeling of use. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Accessories: none
This is a 2-pole cable connector with a cable diameter of 6 mm to 12 mm compatible with NEUTRIK's speakon plug pairs. If you've been looking for one, please take this opportunity. Inside, there is a feeling of use. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Accessories: none
The price has been reduced. 2026/5/6 sales price 12,000 yen. * Since it is a commercial device, operation has been confirmed, but it is sold as is without warranty. The input/output terminals are XLR or phone. This professional 31-band stereo graphic equalizer is ideal for studio use. It looks like a studio mixer, but it can also be used for audio. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.2 operation confirmed
Accessories: carrying case
Main specifications: frequency band 31 band frequency characteristics 10 Hz to 30 kHz input terminals XLR x 2, phone x 2 output terminals XLR x 2, phone x 2, XLR for mono subwoofers x 1 W483 x H133 x D138 mm 2.3 kg
The price has been reduced. 2026/5/6 sales price 12,000 yen. * Since it is a commercial device, operation has been confirmed, but it is sold as is without warranty. The input/output terminals are XLR or phone. This professional 31-band stereo graphic equalizer is ideal for studio use. It looks like a studio mixer, but it can also be used for audio. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.2 operation confirmed
Accessories: carrying case
Main specifications: frequency band 31 band frequency characteristics 10 Hz to 30 kHz input terminals XLR x 2, phone x 2 output terminals XLR x 2, phone x 2, XLR for mono subwoofers x 1 W483 x H133 x D138 mm 2.3 kg
The price has been reduced. 2026/4/29 sales price 22,800 yen. Romanian Meze Audio headphones. A masterful fusion of modern design and handcraftsmanship. It has mild, natural sound quality as it looks (Yoichi Murakoshi)
Maintenance information: 2026.4.25 sound output confirmed
Accessories: instruction manual, connection cord, case, mini-phone jack adapter, original box
Main specifications: Driver diameter: 40 mm, frequency band: 15 Hz to 25 kHz, impedance: 32 ohms; weight: 260 g
The price has been reduced. 2026/5/4 sales price 29,800 yen. *Currently sold. The 20cm driver unit and drone cone mounted in an enclosed cube cabinet make powerful sounds with a built-in 150W digital amplifier. Another point is that it looks adorable and can be placed anywhere, even in a small space. There are small scratches on the exterior (Hiura Katsuji)
Maintenance information: 2026.5.2 continuity confirmed
Accessories: power cable
Main Specifications: Driver Unit LFDriveUnit 200mm x 1 200mm x 1 ABR Frequency Characteristics 38Hz-150Hz Built-in Amplifier 150W (ClassD) W293 x H293 x D293 x D293 mm Weight 9.6 kg
The disposal price has been reduced. Member prices are not applicable. 2026/5/5 sales price 1,380,000 yen The unit has been refreshed with internal and external maintenance including edge replacement and overhaul! A system equivalent to Westminster's modifications. Improvements have been made, such as adopting internal wiring with less transmission distortion and replacing the level control part with gold-plated parts. It has an overwhelming presence, and it is a famous machine that plays high-quality playback sound from an elegant design that looks like a work of art. The exterior has also been beautifully finished due to maintenance (Oikawa Tetsuji)
Maintenance information: 2026.5.5 maintained (exterior repair/polishing/oil finish, saran net cleaning/repasting, frame repair
Unit maintenance: low band edge exchange/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning/center adjustment network maintenance: frequency characteristic check/ATT part contact cleaning, faston terminal cleaning unit detachment)
Accessories: key, instruction manual
Main specifications: compound horn type enclosure+dual concentric unit (3839W) W1030×H1300 ×D631mm 115kg/bottle
Full maintenance from unit maintenance such as magnetic circuit cleaning, center adjustment, etc., to saran net replacement, exterior repairs, etc.! A small speaker equipped with a 10-inch unit HPD295A with a form that looks like an ARDEN has been made smaller as it is. The good localization unique to coaxial is suitable for auditions at close range, and it sounds more than its size. Serial 208586/207791 (Takasaki Atsushi)
Maintenance information: 2026.5.19 Maintained (exterior repair/polishing/oil finish. Front baffle cleaning, rear baffle repair/painting. Saran net replacement. Unit maintenance: magnetic circuit rust removal/gap cleaning/center adjustment on both low range side and high range side
Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, 4-pin terminal cleaning, terminal cleaning)
Accessories: saran net
Main specifications: 2 way 1 speaker bass reflex system bookshelf type unit HPD295A (29.5 cm coaxial Alnico) rubber edge bass reflex type frequency band 50 Hz to 20 kHz efficiency 87.5 dB impedance 8 ohms allowable input 50 W 350 x H524 x D250 mm 18 kg/book
Currently sold. FiiO headphone amplifier with built-in USB DAC Although it is compact, it is a product with high cost performance, such as adopting a dual configuration that operates one DAC chip at a time on the left and right channels. If you've been looking for one, take this opportunity. There are no visible scratches on the exterior, etc., and it is good with just the degree of dullness (Kobayashi Hitoshi)
Maintenance information: 2026.5.15 Operation confirmed
Accessories: instruction manual, power cable, connection cable, original box, conversion plug
Main Specifications: DAC Chip: AK4493SEQ x 2 Digital Input: USB Type B x 1 RCA Coaxial x 1 TOS Optical x 1 Analog Input: RCA Line Input x 1 System Analog Output: RCA Line Output x 1 System Headphone Output: 4.4 mm Balance x 1 System Compatible with 6.35mm Single End x 1 System Sampling Rate USB: PCM 384kHz/32bit DSD 256 (Native) RCA Coaxial: PCM 192 kHz/24 bit TOS light: PCM 96 kHz/24 bit headphone recommended impedance 16 to 300 ohms S/N ratio ≥120dB (A-weighted, when USB input) less than 0.00028% (when headphone output) less than 0.0005% (when line output) noise floor less than 7.7 UV (when balanced, A-weighted, USB input) less than 4.4 UV (single end, a-weighted, when USB input) output impedance 1 Ω (when 32 ohm load) W120 x H55 x D168 mm 570 g
1 bottle only This is a 15 inch woofer unit widely used in PA speakers and subwoofers such as the JBL JRX115, SF15, and EON1500. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.5.16 Operation confirmed
Accessories: original box
Key Specifications: 15 inch impedance 8 ohms allowable input 225 W (RMS) 450 W (max) 99 dB
LAN cable 0.5m 1 Buffalo Hi-Res Compatible Cable If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.5.20 Continuity confirmed
Accessories: original box
LAN cable 2.0m AudioQuest LAN cable. It is designed specifically for noise reduction and signal stability. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.5.20 Continuity confirmed
Accessories: original box
Unspecified cabinet. If you've been looking for this size, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: opening W373 x H126 mm (actual measurement) outer dimensions W435 x H170 x D345 mm 3.6 kg (actual measurement)
Maintenance has been completed, including the replacement of 55 electrolytic capacitors! Lux tubular pre-main amplifier. It is designed to look like separate amplifiers combined into one body. Since the 6550 is built in, I imagine a powerful sound, but since the power is reduced, you can enjoy a thick, glossy sound (Sasaki Shota)
Maintenance Information: 2026.5.17 Maintained (Degraded Electrolytic Capacitor Replacement (55 in Power Supply Unit, Power Amplifier Unit, Phono Equalizer Unit, Tone and Buff Amp Section) Lever Switch Partial Disconnect Cleaning (Turnover Frequncy Switch/Filter/Mode/Monitor/Input-Selector Switch) Constant Voltage Circuit Resistance Disconnection Exchange (x2) Tone Balance Main Volume disassembly contact cleaning. (Operation point check and adjustment and sound output test after the above treatment)
Accessories: copy of the manual
Main specifications: 32W+32W (8Ω) vacuum tube 6550, 6CG7, 12AX7A W493 x H170 x D477 mm 25 kg
This is a 2-pole cable connector with a cable diameter of 6 mm to 12 mm compatible with NEUTRIK's speakon plug pairs. If you've been looking for one, take this opportunity. Inside, there is a feeling of use. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2026/4/1 sales price 99,800 yen This is a speaker system with JBL's masterpiece full range unit LE8T mounted in a self-made enclosure. If you've been looking for one, take this opportunity. A feeling of use can be seen on the exterior, such as scratches on the enclosure, dullness, peeling veneer, sticking on the top plate, stains, deterioration, flame misalignment, etc. on the saran net (Kobayashi Hitoshi)
Maintenance information: 2026.3.27 Maintained (corn paper repair) 2026.3.21 Maintained (edge replacement)
Accessories: saran net
Main specifications: LE8T: 20cm full range unit ferrite magnet 8Ω playback frequency 35 to 15,000 Hz screw pitch (diagonal) 193 mm 3.7 kg body W440 x H750 x D300 mm 22.8 kg (actual measurement)
Wood cabinet from unknown manufacturer. There is a characteristic M5 screw hole on the bottom with a clawed nut. If you are impressed by the shape, or if you are looking for one, please take this opportunity. The exterior has partial discoloration and small scratches on the top plate (Hiura Katsuji)
Accessories: none
Main specifications: W475 x H190 x D345 mm 2.6 kg inner diameter W405 x H145 x D300 mm (actual measurement)
*Currently sold. It is a speaker used in higher-level models such as the company's mini component Radian. If you've been looking for one, take this opportunity. Exterior, peeling veneer, dullness, scratches, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2026.4.30 Operation confirmed
Accessories: saran net
Main specifications: W205 x H350 x D245 mm 5.2 kg (actual measurement)
The disposal price has been reduced! Member prices are not applicable. 2026/4/1 sales price 79,800 yen Maintained! 150-4H instrument model It is based on the masterpiece unit 150-4C, and the thick sinking low frequencies and instantaneous power that can be imagined even from thick rims cannot be enjoyed without this woofer. This product is recommended for those looking for an aggressive mid-low range that makes you want to make a loud noise by storing it in a front load enclosure, etc. There are tear repair marks around some edges. (TAMURA Eiji)
Maintenance information: 2026.4.1 Maintained (grommet solder and tinsel replaced. (Repairing torn corn paper)
Accessories: No accessories
Main specifications: 38 cm ferrite playback frequency band 35 Hz to 2.5 kHz 98 dB impedance 8 ohms rim outer diameter 400 x D157 mm screw pitch 370 mm (diagonal) 13.85 kg
The price has been drastically reduced. 2026/4/11 sales price 10,000 yen. GARRARD 301 cabinet As for the tone arm, the previous owner seems to have installed the Technics EPA-101S. If you've been looking for one, take this opportunity. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W540 x D345 x H135 mm (without protrusions) 7 kg