※Since it is cheap, it is currently sold. This is a thin center speaker. Since it has an anti-magnetic design, this model is easy to use and easy to combine with other speakers. Recommended for those who are building surround sound for the first time. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 sound output confirmed
Accessories: instruction manual, connection cord, original box
Main specifications: 2 way, 3 speakers, bass reflex system, center type, anti-magnetic design, playback frequency band 60 Hz to 20 kHz, 88 dB, 6 ohms, allowable input, 40 W, W435 x H100 x D221 mm, 2.2 kg
Genuine YAMAHA, genuine replacement needle for CG-8100 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Genuine replacement needle for YAMAHA CG-6900 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
※Since it is an old standard, it is inexpensive. HDMI cable 3.0 m gold plate coated terminal uses a flat structure to avoid signal loss, crosstalk, and timing errors caused by uneven length when bent (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
HDMI cable 2.0m HDMI → HDMI High Speed with Ethernet (HDMI Ver 1.4) 3D/HD4K compatible entry class yet has excellent speed performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: original box
If you are looking for a 1.9 m HDMI cable, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 continuity confirmed
Accessories: none
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Accessories: none
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
Although it is an unused item, there is a possibility that mold has occurred because no preservatives have been added. VPI vacuum record cleaner refill cleaner solution (Kobayashi Hitoshi)
Accessories: none
Although it is an unused item, there is a possibility that mold has occurred because no preservatives have been added. VPI vacuum record cleaner refill cleaner solution (Kobayashi Hitoshi)
Accessories: none
Optical digital cable 1.0m optical mini plug to optical angle plug If you've been looking for one, take this opportunity. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
Mini plug cable 1.5m stereo mini plug to stereo mini plug Stable high sound quality can be ensured with a high purity 99.996% OFC oxygen-free copper cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: original box
Optical digital cable 2.0m optical mini plug to optical angle plug The exterior and original box are damaged, but the main body is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box (damaged)
D terminal/RCA-D terminal/RCA cable 1.0 m There is a feeling of use due to appearance, dullness, friction, etc. (Kobayashi Hitoshi)
Maintenance information: RCA operation checked, D terminal unchecked
Accessories: original box
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
* I checked the sound, but since it is cheap, it will be passed on as it is. 3-way speaker The saran net on both sides does not open, the screws on the back plate are rusted, and the contents are unidentified because they cannot be removed. There are scratches, dirt, and dullness on the exterior (Katsuji Hiura)
Maintenance information: 2022.1.27 sound output check OK
Accessories: Saran net
Main specifications: 8Ω 60W playback frequency band 35-20,000 Hz W360xH790×D290mm 13.25kg
Speaker cable 2.0m pair with soldered ends. Smooth, soft, silky sound like no other. If you pair it with a recent speaker that has strong sound pressure in the treble range, the corners can be removed moderately, and you can feel a relative sense of volume in the bass range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
※Only 1 is an unopened item, the line cable is 5.0 m unopened and has not been checked, but this is the current situation (Kobayashi Hitoshi)
Accessories: original bag
※The continuity of the 5.0 m line cable has been confirmed for only 1 line cable. The exterior is beautiful with little feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2023.5.20 Confirmation Confirmed
Accessories: none
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
TOPPING USB isolator This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm
The dust cover is out of stock, so it's cheap. The mk4 model is a classic Technics analog player. It is a 78-rotation compatible and cable detachable model, which is rare in the 1200 series, and has strong consumer elements. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: copy of instruction manual
Main specifications: Direct drive, quartz control, rotation speed 33, 45, 78 rpm, tone arm, universal S-shaped static balance gimbal suspension system, needle pressure adjustment range 0 g to 4.0 g, W453 x H162 x D360 mm, 12.5 kg
This is a replacement needle for the national cartridge EPC-05STA. Unopened and unchecked (Mizushima Itsuro)
Maintenance information: 2024.3.8 unchecked
Accessories: original box
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
There is a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it with 2CH regardless of genre. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: zipper cross grill
Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
Exterior maintenance completed! York Minster, which is low in stock, has arrived. It features an Alnico magnet and a large bass reflex on the back. The sense of scale that exceeds its size and the beauty of the sound of a stringed instrument are attractive. There is a thin line wound on the back and a small dent on the back corner on one side (Murakoshi Yoichi)
Maintenance information: 2024.5.10 maintenance (condition check/contact improvement, exterior cleaning/touch repair)
Accessories: saran net, jumper
Main specifications: 12 inch coaxial 2-way hard edge type bass reflex frequency characteristics 23 Hz to 22 kHz sound pressure level 94 dB impedance 8 ohms W 620 mm x H1080p x D447 mm weight 61.5 kg/book
Replacement needle for Victor MD-1050Z, Z5P Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
This is a replacement needle compatible with the Technics MM cartridge EPC-05STA. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Technics MM cartridges EPC-96SSAD. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with the Technics MM cartridge EPC-42. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Technics EPC-95 SSED. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Technics EPC-27 and EPC-09ST. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
HITACHI DS-ST40 COMPATIBLE This is a replacement needle for MT-10 and MT-22. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Compatible with Mitsubishi 3D-44M This is a replacement needle compatible with MAG-44. Unopened. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Unopened Replacement needle for Columbia/Denon cartridge, PU-1270, PU-1280, SPC-310 It is unchecked for replacement needle only. (Hitoshi Kobayashi)
Accessories: case
Compatible with SHARP OPTONICA STY-101 This is a replacement needle for CART-101. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for Sony XL-250G This is an ND-250G compatible product. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box