Output transparent pair for push-pull output 40W primary: 8kΩ secondary: 4-8-16 ohms W83 x H104 x D78 mm 2.3 kg/piece with original box (no label on one side) There are scuffs and line scratches in places (Kojima Yosuke)
Accessories: original box
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
The stylus is good, but since the cantilever is curved, it is inexpensive. A mono-only cartridge with a traditional 33 series body. Play mono records clearly with a pick-up that is only horizontally oriented. It has vertical compliance and is optimized for recurrent mono editions in the stereoca era. The range is wider than Denon's DL-102 and you can feel the expansion (Fujisawa Yukishi)
Maintenance information: 2023.8.29 Operation confirmed
Accessories: needle cover
Main specifications: MC type needle pressure 2.3 to 2.7 g (2.5 g standard) Muku round needle high hardness duralumin cantilever PCOCC coil anti-vibration rubber “honeynight” impedance 10 ohms 6.9 g
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm
※1 bottle only. This is a 10 cm full range unit from FOSTEX. It is a very popular model for those who make their own speakers. The sound quality is bright and has an impression of tension. Dull, there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.8.11 sound output tested
Accessories: manual, original box
Main specifications: full range aperture 10 cm maximum input 15 W 8 ohms magnetic flux density 13000 gauss baffle aperture diameter 9 cm recommended enclosure volume 15 L
Since the condition is poor, such as cracks in the body, it is currently being sold. A small full-range speaker that is compact, can be placed freely, and has a gentle impression. The sound quality is soft and the sound is relaxed. You can see a feeling of use such as cracks, dullness, and abrasions on the exterior and body (Kobayashi Hitoshi)
Maintenance Information:2023.6.5 Operation confirmed
Accessories: none
Main specifications: full range compact speaker 8ohm maximum input 40W W230 x H150 x D163 mm 1.6 kg
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
The price has been reduced! 2020/11/9 sales price 70,000 yen maintenance completed. This is a 2-way network. Since bass can be pushed out well, and high frequency adjustment ranges can be obtained with 2 types of HF/MF attenuators, it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to the feeling of use. Serial 05234 07210 (Makoto Kono)
Maintenance information: 2020.11.9 maintained (common wiring reinforcement terminal solder removal, rust removal treatment, cleaning, ATT (x4) contact disassembly cleaning, contact grease application, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound check)
Accessories: none
Main specifications: W114 x H190 x D228 mm 1.8 kg Crossover frequency 1.2 kHz Impedance 8 ohms Level control is continuously variable up to -8 dB in the middle range is 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
Disposal prices have been reduced! Member discounts do not apply. 2023/4/2 sales price 10,000 yen*Currently sold. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use such as exterior, fading, abrasions, etc. (Kanai Hidetsugu)
Maintenance information: 2023.4.2 sound output confirmed
Accessories: none
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/29 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced! Member discounts do not apply. 2023/4/2 sales price 10,000 yen*Currently sold. The safety wire is broken. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, such as fading, abrasions, etc. (Kanai Hidetsugu)
Maintenance information:2023.4.2 sound output confirmed
Accessories: none
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced! Member discounts do not apply. 2023/4/2 sales price 10,000 yen*Currently sold. The safety wire is broken. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. On the exterior, there is a feeling of use, such as cracks, fading, abrasions, etc. on the main body (Kanai Hidetsugu)
Maintenance information: 2023.4.2 sound output confirmed
Accessories: none
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/29 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/30 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Variable Resistor Attenuator Bridge T Type 21 Steps Maximum Attenuation 50 dB Impedance 600 Ohms W45 x 64 mm 140 g with Volume Knob (Kojima Yosuke)
Accessories: volume knob (attached to the main unit)
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg