The liquid crystal display mechanism has been replaced with a brand new one at Accuphase! A voicing equalizer with an automatic sound field correction function built into a graphic equalizer equipped with a high-speed DSP. We have prepared a simple course where automatic measurement and correction can be performed with simple operation using a stylus, and a custom course where you can pursue sound field correction for your favorite sound. In addition to coaxial digital/optical digital, the digital out is also equipped with the company's own HS-LINK. It is designed so that a maximum source input of 192 kHz/24 bits can be performed. Small scratches and threads can be seen. Serial F4Y237 (Fujisawa Yukishi)
Maintenance information: 2026.4.11 Manufacturer maintained (LCD) screen has vertical streaks and places with poor sensitivity, so display Ass'y was replaced. Pressure safety check OK. Operation check, cleaning)
Accessories: remote control, instruction manual, power cord, microphone, microphone holder
Main specifications: digital input (HS-LINK x 1 COAXIAL x 1) digital output (HS-LINK x 1 COAXIAL x 1 OPTICAL x 1) analog input (RCA x 1 XLR x 1) analog output (RCA x 1 XLR x 1) USB terminal USB 2.0/3.0 (up to 128 GB) * for flash memory connection W465 x H161 x D396 mm 14.3 kg
SONY network high-resolution audio player with built-in HDD and power amplifier. This past sound source can be reproduced with high sound quality as a high-resolution sound source. You can enjoy listening to music with a rich sense of realism with the HDD audio system. There is a scratch and the remote control is out of stock (Daiki Goto)
Maintenance information: 2026.4.11 storefront operation confirmed (each input/output sound is OK. It can function as a music server. Ripping is OK with an external drive)
Accessories: none
Main specifications: built-in HDD capacity 500GB playback compatible codec DSDIFF (DSD) 2.8 MHz, 5.6 MHz, DSF: 2.8 MHz, 5.6 MHz, WAV (LPCM) maximum 192 kHz/32 bit, APCM maximum 192 kHz/24 bit, FLAC: maximum 192 kHz/24 bit, ALAC: maximum 192 kHz/24 bit, ALAC: maximum 192 kHz/24 bit, WMA, MP3, AAC, ATRAC (NON DRM) Internet radio (tuneIn, radiko.jp) maximum number of songs managed (operation guarantee) 20,000 songs W333 × H209 × D373 mm 5.8 kg
Using a double triode vacuum tube push-pull system, it expresses dynamic sound not found in conventional headphone amplifiers that achieve “strength,” “richness,” and “dynamism.” There is a scratch on the front corner. Serial 25100003 (Fujisawa Yukishi)
Maintenance information: 2026.4.11 operation confirmed
Accessories: power cord
Main specifications: output: 650 mW+650 mW vacuum tube used: 12AU7x2 input terminal: RCA1 system headphone terminal: standard jack (front), mini jack (rear) frequency characteristics: 10 Hz to 60 kHz residual noise: 0.1 mV or less W130 x H170 x D230 mm 3.4 kg
There is no operation problem, but since the manufacturer does not currently exist, it is sold as is. *Storage such as HDD is not included. multimedia player. An all-in-one model that performs everything from recording to playback, such as a phono equalizer, CD ripping, high resolution, etc. There is no poor response that is common in multiplayer, and it can be used comfortably (Daiki Goto)
Maintenance information: 2026.4.11 operation confirmed
Accessories: remote control
Main specifications: 100W+100W 7-inch large LCD compatible high-resolution format/DSD (64/128/256), DXD (24 bit/352.8 kHz), HD FLAC (24 bit/192 kHz), HDWAV (24 bit/192 kHz), PCM (32 bit/384 kHz) digital audio output/coaxial, TOSLINK, AES/EBU, USB and HDMI MM type compatible phono equalizer Mounted external dimensions W441 x H111 x D330 mm weight 8.5 kg
There is no operation problem, but since it is a commercial device and a modified product, it is currently sold. Tuned up with Kenric Sound. Three digital coaxial terminals have been added. A 3-way digital channel divider with variable frequency. Remote from a PC is also possible (Daiki Goto)
Maintenance information: 2026.4.11 operation confirmed (tuned up with Kenric Sound)
Accessories: manual, power cable, connection cable, original box
Main specifications: W482 × H44 × D217 mm 3 kg
There is no operation problem, but it is sold as is. A DD converter using the ES8620, which is the latest USB audio interface solution. There is dullness and dirt (Daiki Goto)
Maintenance information: 2026.4.11 operation confirmed
Accessories: manual, power cable
Main specifications: USB digital interface, ESS USB interface, ES8620, PCM32bit/768kHz/DSD512 compatible, Accusilicon, femto clock, compatible with external 10MHz clock input, I2S/AES/EBU/coaxial/optical/BNC output, built-in linear power supply, W220 x H50 x D170 mm, approx. 2.5 kg
LAN cable 1.0m Cat.6A specification Ethernet cable by Buffalo's audio brand Della Although the wire part is equivalent to Cat.7, the ground connection is only on one side, and the risk of ground loops is eliminated by floating on the other side (Kojima Yosuke)
Accessories: dustproof cap
Stylish cartridge with white and yellow coloring. It's a nice, sharp sound. The exterior is in a state where there is a feeling of use such as oxidation and dullness over time (Yamato Yuki)
Maintenance information: 2026.4.11 sound output confirmed
Accessories: none
Main specifications: VM type needle pressure 1-2 g dead weight 17 g
The price has been drastically reduced. 2026/3/12 sales price 208,000 yen It has been beautifully revived with side panel repairs! Thorough maintenance was carried out, such as replacing the main volume, power amplifier volume, 2 output relays, 28 transistors, solder repair, and pin jack polishing! This amplifier marked the end of the X series, which began with the AU-X1. Boasting a weight of 35 kg, it is a model that was heavily invested in budget and material volume, just like in the heyday of audio. Please enjoy the powerful and powerful sound of Sansui with full torque. There is paint on the back (Daiki Goto)
Maintenance information: 2026.2.22 maintained (① power amplifier section power transistors, transistors (10 pieces) resistors, replacement ② flat amplifier transistors (4 pieces) replacement ③ selector lamp replacement ④ main volume, power amplifier volume replacement ⑤ switch disassembly and polishing (input selector, power amplifier operation, speaker, jump, subsonic, tape copy) ⑤ phono relay (8 pieces), Transistor (10 pieces) replacement ⑥ solder repair ⑦ interior and exterior inspection and cleaning, pin jack polishing, output test, bias adjustment)
Accessories: copy of instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W470 x H178 x D486 mm weight 35.1 kg
The price has been drastically reduced. 2026/4/6 sales price 450,000 yen Maintenance was completed in 2023/7. A highly complete player system created by Audiocraft, which has been working on analog record playback with various approaches. It stood out with its floating structure, which was rare among domestic machines at the time, when there were many rigites. The belt drive, floating, and arm are equipped with the SME 3010R and are compatible with various cartridges, making it one car where you can clearly feel the advantages of analog. It is in good condition even when viewed from the model year (Oikawa Tetsuji)
Maintenance information: 2026.4.6 operation confirmed
2023.7.15 Maintained (Removed boards, etc. have been attached. Since there are no screw sleeves or anything else, I installed an additional one. The circuit connections have been rewired. The electrolytic capacitor has been replaced. (PU code created)
Accessories: none
Main specifications: belt drive player W500 x H240 x D400 mm (actual measurement) Arm part: short arm type: static balance type effective length: 237 mm cartridge mounting weight range: 1.5 to 26 g (cartridge only) 9.5 to 34 g (including shell) needle pressure variable range: 0 to 5 g
The price has been reduced. 2026/4/9 sales price 228,000 yen*Inexpensive because there are many scratches. Maintenance completed in 2018/10. A new edge softening treatment has been applied this time. Diatone Pure Audio premium speaker. The cohesion and good localization of the sound, which is typical of 2 ways, and the high sense of depth are outstanding. The high level of musicality, such as the sound and good tone typical of DIATONE from the 90s, is excellent, and the music is reproduced naturally and in detail. There are slight irregularities on the exterior and center net of the woofer, and there are many feelings of use, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.9 maintained (edge softening treatment, simple exterior retouching repair, grill dent correction) 2018.10.10 maintained (exterior cleaning/chipped putty/touch repair/waxing, saran net replacement, woofer edge softening treatment, unit detachment)
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex system, floor type, 4Ω, 89dB, magnetic-proof type, W350 x H900 x D365 mm, 40 kg
The disposal price has been reduced. Member discounts are not applicable. 2026/4/2 sales price 548,000 yen This is the flagship speaker that Monitor Audio is proud of. 3-way configuration with 2 200mm RDT bus drivers, 100mm midrange drivers, and C-CAM high-frequency ribbon transducers. It is a masterpiece model filled with the appeal of the company, which combines grandeur, transparency, and subtlety. The exterior, bass reflex port paint deterioration, plating part deterioration, and a feeling of use such as line scratches, dullness, and small scratches can be seen on the front simulated leather part. Jumpers are general-purpose items (Murakoshi Yoichi)
Maintenance information: 2026.3.30 sound output confirmed
Accessories: saran net, spike holder, jumper (general purpose)
Main specifications: 3-way 4-speaker bass reflex 90dB 4Ω 200mmRDT bus driver x 2, 100mmRDT mid-range driver x 1, C-CAM ribbon tweeter x 1 W288 x H1113 x D368 mm 46.5 kg
A new dust cover was created, and the main unit was thoroughly maintained, such as replacing 12 electrolytic capacitors! Furthermore, it comes with a shell cartridge (M44G/ MG-10), so you can use it right away! This model won the Good Design Award in 1976. It is a famous machine from yesteryear, full of 70s character. It has a stable sound and is recommended as an introduction to analog. As for the exterior, small scratches, dullness, and light burns can be seen over time. Serial 41033374 (Yamato Yuki)
Maintenance information: 2026.4.10 Maintained (capacitance loss capacitor replacement arm disassembly, inspection, cleaning speed VR cleaning, etc., inspection of various parts, operation tests carried out)
Accessories: Shell (audio-technica MG-10) cartridge (SHURE M44G) instruction manual copy
Main specifications: Direct drive AC servo motor, 60 dB SN-ratio turntable/diameter 31 cm, aluminum die-cast, power consumption 12.5 W, weight 9.1 kg
Sony IM cartridge by Audio-Technica OEM. This easy-to-use cartridge has bright and intense sound quality, and is perfect for introductory use. Dullness can be seen on the exterior (Tomonori Asae)
Maintenance information: 2026.4.10 operation confirmed
Accessories: none
Main specifications: mm needle pressure 2.0g dead weight 7g (actual measurement)
A high-precision level gauge that is essential for leveling players. It is a long-selling model with an aluminum body (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 35 mm x H17 mm dead weight 24.5 g
Manufacturer's maintenance, including pickup replacement, has been completed in 2024! Esoteric heavyweight SACD transport P-03 It is equipped with a VRDS-NEO mechanism for high-end use, and the power supply part and mechanism part have a completely separate structure with a strong chassis. The balance is so good that it surpasses advanced models, and in particular, you can enjoy the low frequency resolution and attack strength at the highest grade. There is a dull feeling of use (Sasaki Shota)
Maintenance information: 2024.2.14 Maintained by the manufacturer (pickups, 2 belts, flat cables, bearings were replaced and operation checked. The playback operation and operation of each output section have been checked.)
Accessories: remote control, manual, power cable
Main specifications: Playable media with DSD conversion function Super Audio CD, CD, CD-R, CD-RW digital output i.LINK x 1/XLR x 2/RCA x 1 word sync input BNC x 1 W445 x H159 x D420 mm 30 kg
The disposal price has been reduced. Member discounts are not applicable. 2026/3/30 sales price 748,000 yen An innovative 2-channel stereo DAC circuit was completed based on the original circuit of the Master Sound Discrete DAC developed by the Grandioso D1X. It is equipped with a 64 bit input 512 FS delta-sigma modulator developed independently. In order to perform D/A conversion that matches the characteristics of DSD and PCM, we have developed dedicated FPGAs (digital processing algorithms) for each. Get the best sound quality from any digital source. There are no visible scratches on the exterior, etc., and it is good with just the degree of dullness (Kobayashi Hitoshi)
Maintenance information: 2026.3.29 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: Compatible file formats PCM lossless: FLAC, Apple Lossless (ALAC) WAV, AIFF, MQA DSD lossless: DSF, DSDIFF (DFF) DoP compressed audio: MP3, AAC (m4a container) USB DRIVE terminals: 2 systems (front, rear) Compatible file systems: FAT32, exFAT, NTFS, single partition, USB 2.0 or higher recommended Input signal format: Linear PCM 44.1k to 384 kHz, 16 bit/24 bit/32 bit (stereo) 32 bit can only play integer-type format files, DSD 2.8 MHz, 5.6 MHz, 11.2 MHz, 22.5 MHz (stereo) compatible file formats PCM lossless FLAC, Apple Lossless (ALAC) WAV, AIFF, MQA DSD lossless DSF, DSDIFF (DFF) DoP compressed audio MP3, AAC (m4a container) W445 × H131 × D377 mm 13.8 kg
The price has been drastically reduced. 2026/4/3 sales price 158,000 yen tall boy piano gloss black version of the company's mid-class F-500 series. A new point source driver design that has acquired broad directional characteristics called ISOFLARE, a FyneFlute structure with dramatically improved mid/bus diaphragm distortion characteristics, and a BasstraX port system that amazingly enhances low frequency response. These three key technologies create quality beyond common sense, and achieve astonishingly high sound quality that cannot be easily imagined in terms of size and price. The exterior is also in good condition with no noticeable scratches (Murakoshi Yoichi)
Maintenance information: 2026.4.3 sound output confirmed
Accessories: instruction manual, saran net, jumper, spike, spike holder, hex wrench, original box (different serial)
Main specifications: 8Ω 90dB W276 × H984 × D318 mm 18.9 kg
Comes with original box 1.8 m PSE certified power cable is a high-performance standard power cable for high-grade audio devices that is a hybrid of 3 types of soft copper wires: “6N high-purity copper conductor,” “pure silver-coated OFC,” and “high-purity oxygen-free copper.” (Yasuhito Koshihama)
Maintenance information: Conduction confirmed at the store on 2026.4.9
Accessories: original box
An audiocraft headshell that uses a perfect lock pin in addition to its sturdy construction with a hard aluminum molding. It has a degree of perfection that even feels beautiful in form, and the connections are solid, bringing out the full performance of the cartridge (Hiura Katsuji)
Maintenance information: 2026.4.5 continuity confirmed
Accessories: none
Main specifications: aluminum molding, integrated structure, perfect lock system, pin adopted, weight 12 g
There is no operation problem, but since it is a commercial product, it is currently sold. The 160X, which was initially manufactured in the DBX 160 series of compressors, has arrived. Recommended for those looking for a powerful tone. There are scratches and dullness (Daiki Goto)
Maintenance information: 2026.4.8 simple sound output OK
Main specifications: W483 x H43 x D181 mm, weight 2.7 kg (not including knobs, actual measurement)
There is no operation problem, but since it is a commercial product, it is currently sold. Some knob covers are missing. The 160X, which was initially manufactured in the DBX 160 series of compressors, has arrived. Recommended for those looking for a powerful tone. There are scratches and dullness (Daiki Goto)
Maintenance information: 2026.4.8 simple sound output OK
Main specifications: W483 x H43 x D181 mm, weight 2.7 kg (not including knobs, actual measurement)
The price has been drastically reduced. 2026/1/14 sales price 10,000 yen. I confirmed light distortion in the sweep check, but this is the current situation. It's for home theaters, but it's also quite possible to use audio. You can enjoy flat, high-resolution sound. You can see the exterior, dullness, gaps in the veneer, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.1.13 operation confirmation (light distortion during sweep check, judged to be an acceptable level for music signals)
Accessories: saran net
Main specifications: 2 way 2 speakers, playback frequency band, 35 Hz to 20 kHz, impedance 4 ohms, sound pressure level 89 dB, W190 x H295 x D 240 mm, 5.8 kg
The price has been reduced. 2026/3/18 sales price 12,000 yen. Replacement needle for VM740ML I was able to confirm the sound output. If you were looking for one, please take this opportunity (Murakoshi Yoichi)
Maintenance information: 2026.3.18 sound output confirmed
Accessories: case
Main specifications: needle pressure 1.8 to 2.2 g (2.0 g standard)
The price has been drastically reduced. 2026/3/21 sales price 25,000 yen. I was able to make a simple sound, but the details have not been checked and will be sold as is. 3-way digital channel divider The frequency, slope, and level of the low cut filter and high cut filter can be set respectively, and the slope can be freely selected from 6 types. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.3.15 operation confirmed (simple sound output only, details not checked)
Accessories: power cable
Main specifications: number of audio input channels 2 terminals type XLR, electronic balance microphone input channel number 1 XLR balance number of audio output channels 6 terminals shape XLR balance AD-DA conversion 24 bit, 48 kHz frequency characteristics 20 to 20 kHz W483 x H45 x D150 mm 2.3 kg
A manufacturer maintenance item with a new dust cover replacement, arm disassembly, cleaning, etc.! Audio Technica MG-10 with SHURE M44G! A model that gained popularity among Denon middle class players. It comes with a nice semi-automatic function and is easy enough to use. The heavy cabinet and thick sound quality unique to analog are attractive. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.3 Denon service maintenance completed (lifter height adjustment. Arm disassembly cleaning. Replace the power supply unit, head amplifier section, and capacitor. CDS exchange. (Other inspection of each part, operation sound test)
Accessories: straight pipe, EP adapter, shell (MG-10), cartridge (M44G), instruction manual
Main specifications: semi-auto record player quartz lock direct drive W485 x D410 x H195 mm 15 kg
*Since manufacturer handling has been completed, it will be sold as is. This is an OPPO multimedia Blu-ray disc player. It is a product with a high degree of perfection as a media center that is more than just a player. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.8 operation confirmed
Accessories: remote control, power cable
Main specifications: BD-Video, BDXL, DVD-Video, DVD-Audio, SACD, CD, HDCD compatible, HDMI output 2 systems (4K upscaling/3D compatible) 2 HDMI inputs (front 1/back 1) audio output 7.1 ch/5.1 ch/2 ch analog, optical/coaxial digital, 3 USB terminals (USB 2.0) network wired LAN/wireless LAN (using attached adapter) W430×H79×D311mm 4.9 kg
Currently sold. SPL (German recording professional equipment manufacturer) input/output balance terminal volume controller. By using an active circuit design, it is possible to avoid a decrease in linearity due to impedance changes that occur in passive circuits. The volume is continuously variable, so there is almost no imbalance between left and right, and it expresses a high level of sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.8 operation confirmed
Accessories: power cable
Main specifications: 1 XLR input/output system W215 x H80 x D220 mm 1.6 kg
※Since it is for commercial use, there is no problem with operation, but it is sold as is. A digital reverberator that pioneered a new era in Yamaha's reverb effect technology. Using third-generation Yamaha digital signal processors (DSP), we have obtained unprecedented density, superior resolution, and incredible dynamic impact. There is a scratch (Daiki Goto)
Maintenance information: 2026.4.8 operation confirmed
Accessories: none
Main specifications: frequency characteristics 20 Hz to 20 kHz, +1.0 dB, -1.5 dB dynamic range 110 dB Typ (104 dB or more) rated output +4/-10 dB (with level switching SW) *2 maximum output +24 dB (when level switching SW: +4 dB) *2 W480 x H89 x D398.5 mm weight 5.5 kg
There is no operation problem, but since it is a commercial product, it is currently sold. The 160X, which was initially manufactured in the DBX 160 series of compressors, has arrived. Recommended for those looking for a powerful tone. There are scratches and dullness (Daiki Goto)
Maintenance information: 2026.4.8 simple sound output OK
Accessories: none
Main specifications: W483 x H43 x D181 mm, weight 2.7 kg (not including knobs, actual measurement)