Ethos (Ethos), limited to 500 pieces worldwide, is now in stock! ※The item that was brand new and unopened was unpacked for inspection. SPU Ethos was born as the culmination of an unchanging spirit that has been passed down for over 60 years, refined with the latest technology. The classic SPU sound shines even more, captivating analog fans. The exterior is generally good. Serial 332698 (Tomoho Asaine)
Maintenance Information: Operation confirmed
Accessories: original box instruction manual needle cover
Main specifications: Output voltage (1 kHz 5 cm/sec): 0.3 mV channel balance (1 kHz) 1.0 dB channel separation (1 kHz) 20 dB channel separation (15 kHz) 10 dB frequency characteristics (20 Hz-25,000 Hz) ± 2 dB tracking ability (315 Hz, 70 μm under proper needle pressure Horizontal compliance: 8 μm/Mn stylus type Nude Elliptical Stylus Tip Radius: r/R 8/18μm Cantilever Material Aluminum Suitable Needle Pressure: 4.0g Needle Pressure Range: 3.0-5.0 g Tracking Angle 20° Internal Impedance 3.5Ω Recommended Load Impedance 10Ω or More Coil Wire 8N High Purity Copper Cartridge Shell Wood Powder and Resin Composite Material Dead Weight 32g
SPU-GE reprint model. This is a popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. Both stylus and cantilever are good. Serial 118880 (Fujisawa Yukishi)
Maintenance information: 2026.5.5 operation confirmed
Accessories: needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
A wooden headshell made by Oak Village made of maple wood. The naturalness unique to wood shells goes great with the player's wood cabinet. *Screw holders are not included. (FUJISAWA KOSHI)
Maintenance information: 2026.5.5 continuity confirmed
Accessories: No accessories
Main specifications: dead weight 9.2 g
Standard model in the MC Star series. A popular MC cartridge that has the same engine as the MC-30/20, uses an elliptical needle and picks up all the sounds in the record groove. Among the 3 models, the goodness and strength are impressive, and they go great with pop and rock. It is also recommended for jazz vocals. The stylus is good, but the cantilever darkening is noticeable. (FUJISAWA KOSHI)
Maintenance information: 2026.5.5 operation confirmed
Accessories: No accessories
Main specifications: MC type output voltage 0.5 mV frequency characteristics 20 to 30000 Hz proper needle pressure 2.3 g dead weight 10.5 g
The disposal price has been reduced. Member discounts are not applicable. 2025/12/20 sales price 99,800 yen Maintained! It comes with a Herman mark! Mono cartridge CA25D One of the pinnacle of mono needles. The density unique to mono needles, which is not found in stereo needles, is attractive. There is rust on the cantilever. Serial 135502 (Murakoshi Yoichi)
Maintenance information: 2025.12.19 Maintained (damper replacement, coil adhesion repair)
Accessories: original box, needle cover, brush
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g; dead weight: 31 g
The price has been drastically reduced. 2026/3/9 sales price 99,800 yen with Herman mark! Mono cartridge CA25D One of the pinnacle of mono needles. The density unique to mono needles, which is not found in stereo needles, is attractive. There is a crack at the tip of the needle cover. Serial 136563 (Kaneko Ryuichiro)
Accessories: needle cover, case
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g; dead weight: 31 g
※Since the urethane coating on the back has deteriorated, it is inexpensive. Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place a needle. The LCD screen is backlit and equipped with an auto-off function. The exterior has a feeling of use such as stickiness and dullness on the back (Mizusaki Ryo)
Maintenance information: 2026.5.2 operation confirmed
Accessories: case
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
Model equipped with an ORTOFON RS-212D tone arm. The beautiful design with a natural wood walnut finish is impressive. An attractive gem that condenses acoustic solid technology, such as a Berger motor that rotates a 6.3 kg turntable. The exterior has scuff marks on the seat and line scratches on the motor (Murakoshi Yoichi)
Maintenance information: 2026.4.21 sound output confirmed
Accessories: phono cable, spike holder, strobe, power adapter, spare belt, mat
Main specifications: microcontroller, rotation speed adjustment, quartz oscillator, 50/60 Hz, AC100V to AC240V compatible, W600 x D400 mm, weight 12 kg
High-rigidity heavyweight shell developed by Orthophone for cartridges other than the SPU series. It is an easy-to-use headshell with a flat cartridge ground surface. (FUJISAWA KOSHI)
Maintenance information: 2026.4.28 continuity confirmed
Accessories: original box
Main specifications: machined aluminum alloy, self-weight 16g
The price has been reduced. 2026/4/19 sales price 29,800 yen. ※6 month warranty. MC boost transformer optimized for SPU. The sound creation that is only slightly distorted with a small transformer embodies superb music playback by connecting the SPU. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.18 Operation confirmed
Accessories: none
Main specifications: input impedance 2 ohms to 3 ohms boost ratio 60 times weight 70 g
i.LINK (IEEE1394) cable 1.8 m 4 pin -4 pin HIGHER-OFC conductor with pure silver coating and triple shielding, is a high-grade cable for pure digital (Kojima Yosuke)
Accessories: original box
Orthophone CA25D headshell It is rare that only shells are in stock. If you are looking for one, by all means (Daiki Goto)
Accessories: none
Main specifications: dead weight 22g (actual measurement)