The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
※Since there are 3 missing corners, it is inexpensive. Sorbothane Square Insulators, Set of 4, Black Type When vibration is cut with sorbocaine, a phenomenon occurs where low frequencies clearly and dynamically come out of the speaker itself. The exterior is dull, etc., and there is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: size 30 mm square height 10 mm
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Maintained! The popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units (Sasaki Shota)
Maintenance information: 2024.5.4 Maintained (12 terminal terminal mounting screws replaced, 24 insulating bushings replaced. Terminal area cleaning. Attenuator SW contact cleaning. Crossover 500Hz check OK)
Accessories: none
Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/24 sales price 118,000 yen Maintained! This is QUAD's first transistor preamp. The dark tone, with a sweet sense of humidity, is the British sound itself. The combination with the company's 303 power amplifier is also an attractive system. There is a feeling of use due to aging (Daiki Goto)
Maintenance information: 2023.10.18 Maintained (insufficient capacity of the filter C in the power supply, coupling C in each board, bypass C, etc. → all replaced. Each Vol, SW Gari → All Clean Power cord creation.)
Accessories: power cable, connection cable, copy of instruction manual
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
Maintained! This is QUAD's first transistor preamp. The dark tone, with a sweet sense of humidity, is the British sound itself. The combination with the company's 303 power amplifier is also an attractive system. You can see the exterior, discoloration of the letters, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 maintenance completed (poor contact with connectors such as internal PHONO board/LINE board, etc. → pin caulking, contact polishing, other internal board coupling C replacement, operation check)
Accessories: copy of instruction manual, power cord, connection cord
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
The disposal price has been reduced! (Member prices are not applicable) 2024/3/22 sales price 128,000 yen Maintained! Quad power amplifier Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. The exterior has a feeling of use such as dullness. Serial 41000 (Tomoho Asaine)
Maintenance Information: 2024.3.22 Maintained! (Internal check DC cut C, gain setting C, etc., exchange Tr, etc. check operation check, DIN4P-RCA female cable creation)
Accessories: power cable
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/20 sales price 128,000 yen Maintained! Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. You can see a feeling of use such as appearance, dullness, abrasions, scratches, stains, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 maintenance (DIN connector replacement, resistance in both other channels, capacitor replacement, each Tr all check)
Accessories: connection cable, power cable, instruction manual (copy)
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
All units have been overhauled, including the woofer, mid, driver and tweeter, and network! It is an individual that has been fully restored, including the exterior. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/gray paint. Front and rear baffle repair and painting. Saran net replacement/frame repair. Woofer maintenance: edge replacement, corn paper coating. Midmaintenance: edge replacement, corn paper coating. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, switching SW contact cleaning, high frequency capacitor replacement)
Accessories: none
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Fully overhauled on 2023/12/13! A JBL professional series speaker that combines the mid-high range of a biladial horn, which is characterized by wide directional characteristics, and a 38cm woofer with excellent low frequency reproduction. It is possible to combine high range stretchability while maintaining 2-way mid-range energy in response to professional field requests. You can enjoy a variety of music, mainly jazz, with excellent punching power that cannot be heard on current speakers. ※The notation on the terminal board has disappeared (Mizushima Itsuro)
Maintenance information: 2023.12.12 Maintained (exterior repair, polishing, oil finish, front and rear baffle, hakama, horn repair, painting. Saran net replacement. Woofer edge replacement/cone paper coating. Driver magnetic circuit gap cleaning, center adjustment, sound-absorbing material replacement, terminal cleaning. Network frequency characteristic check, ATT cleaning, terminal contact cleaning)
Accessories: saran net
Main specifications: 2 way bi-radial horn 2235H/2421A 93db W556 × H908 × D480 mm 79.5 kg
※It has been repainted and is inexpensive because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: screws
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
The price has been reduced. 2024/5/10 sales price 99,800 yen Maintained. professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. There is a feeling of use such as a scuff on the top plate. Serial Q002959 (Mizushima Itsuro)
Maintenance information: 2024.2.15 maintenance (internal Tr, C, R check, output phase correction resistor, DC IN± bypass C, gain setting C, CDS replacement within the INPUT photocoupler. INPUT VOL CLEANING Output cable XLR cannon attached)
Accessories: copy of instruction manual, power cable, speaker cable
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
Comes with original box! This is an 8cm full range unit from MarkAudio's ALPair series. It is a self-made unit that is attracting attention because of its technical ability, which has been produced with high accuracy, and has advanced playback capabilities, such as precise and delicate high frequencies. (FUJISAWA KOSHI)
Maintenance information: 2024.5.2 operation confirmed
Accessories: original box
Main Specifications: 8cm full range speaker 4Ω 95-30,000 Hz 85.45dB 10W
A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data. The condition is generally in good condition. *The included shell cartridge is out of stock. Serial 234198228 (Yamato Yuki)
Maintenance information: 2024.4.8 operation confirmed
Accessories: copy of the instruction manual, EP adapter, USB cable, phono cable (general purpose)
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg
Maintained! 15th anniversary model of the 607 series. MOS-FET is used for the power stage, adding a sense of transparency to its characteristic heat, and is compatible with various music genres. It has a configuration that exceeds its class, such as balanced input support, and it is a powerful machine that is still popular today. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 maintenance completed (tone and other switches dismantled and polished, coated with grease (loudness, muting, processor, subsonic, input selector, power amplifier direct, source direct switch), output relay replacement, protector part capacitor replacement, solder repair, internal inspection and cleaning, bottom repair, operation confirmation)
Accessories: power cable, copy of manual
Main specifications: 45W+45W (8Ω) PHONO (MM/MC) W460 × H159 × D446mm 18.8 kg
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
The price has been reduced. 2024/5/25 sales price 29,800 yen. ※There is slight distortion, but I don't mind playing music. Altec's 10cm full range unit is rarely in stock. An ALTEC unit with an orthodox design suitable for bass reflex. Please enjoy the speedy sound unique to ALTEC. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 operation confirmed (slight distortion, no problem with music playback)
Accessories: instruction manual, gasket
Main specifications: inch screw pitch, 120 mm, playback frequency characteristics, 130 to 14,000 Hz, efficiency: 94 dB, impedance: 7 ohms, weight: 0.8 kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
※Only 1 speaker cable 1.3 m terminal is a popular sold out speaker cable for the CARDAS entry series, unprocessed (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
Maintained in 2023/7! A control amplifier that inherits the sound of Yamaha's famous C2a. A highly reliable phono equalizer is used, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. In addition to dullness and small scratches on the exterior, there are scratches on the front sub-panel and insulator marks on the top plate. Serial E052015SU (Hiroki Aso)
Maintenance information: 2023.7.13 Maintained (PHONO circuit IC/capacitor replacement, main board, soldering, deterioration, all correction, volume type, contact correction, long time sound output check)
Accessories: copy of instruction manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
Maintained by the manufacturer! The second generation model in the popular S10 series. It uses traditional ALPHA processing and the company's own Lambda S.L.C. A CD-only model that is still popular today for its vivid mid-high range and rich low range. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 7061502031 (Yamato Yuki)
Maintenance information: 2024.5.17 Maintained (tray washing loading belt, tray opening/closing SW replacement)
Accessories: instruction manual remote control
Main specifications: ALPHA processor, 20-bit current addition type DAC with digital input/output, W434 x H135 x D350 mm, 14 kg
※1 bottle only. Currently sold. A full range of 8cm high grade glass cloth cones. It has a light, unobtrusive sound and is recommended for pop music and female vocals. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.2.17 sweep test good
Accessories: No accessories
Main specifications: 6Ω 84dB 20W 0.54 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (LED installation (original not available) poor power stage transistor deterioration, defective transistor in the board → replacement. Bias adjustment, operation check.)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
The price has been drastically reduced! 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (check capacitors, resistors, transistors, etc. as is OK. bias check)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
The price has been reduced. 2024/3/26 sales price 29,800 yen 2022 manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. You can see a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2022.11.5 manufacturer maintained (all defective transistors replaced. Earth wire installation operation test)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 39,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
*Currently sold. DAITO Voice 16cm full range unit. If you were looking for it, please go ahead (Kobayashi Hitoshi)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box
Main specifications: 8Ω 10W maximum 15W 16cm full range
*One SP terminal is a replacement, so it is inexpensive. It hasn't arrived in a long time. This speaker system inherits the DS-205 design philosophy of making small-aperture woofers sound smoothly with a large capacity enclosure. You can enjoy the soft texture and loud sound. Serial 12502/12517 (Murakoshi Yoichi)
Maintenance information: 2024.5.30 maintenance (exterior cleaning/touch repair, 1 terminal replacement)
Accessories: jumper cable (external product)
Main specifications: 2-way bass reflex type 6.3 ohm 87 dB W360 x H925 x D290 mm 25 kg
*Currently sold. A small speaker with a 16.5 cm woofer. This is a high cost performance speaker that allows you to listen to rich musical sounds that are beyond its size. The full expressive power of the mid-range is attractive. The exterior is good with no conspicuous scratches. Serial 37866 (Yonejima Satoshi)
Maintenance information: 2024.5.30 good sweep test
Accessories: saran net
Main specifications: 2 way impedance 8 ohms efficiency 90 dB playback frequency band 43 to 21,000 Hz W227 x H360 x D230 mm 7 kg
The top model of the premain amplifier launched by AccuPhase to commemorate its 40th anniversary. Uses AAVA volume. The power amplifier section with pure Class A operation is designed to be resistant to changes in the surrounding environment. An overwhelming amount of information filled with a sense of silence and scale. It's the ultimate premain with a high degree of perfection. The exterior has a feeling of use such as dullness. Serial 16X713 (Jun Tamai)
Maintenance information: 2024.5.30 sound output confirmed
Accessories: remote control instruction manual power cord
Main specifications: 30W+30W (8Ω), 60W+60W (4Ω) frequency characteristics 20Hz to 20kHz input terminals/balance (XLR) x 2 systems, unbalance (RCA) x 5 systems. Up to 2 option boards can be added to the rear panel W465 x H191 x D428 mm 24.7 kg
The pair tube is thought to be made by TESLA due to its 6CA7 compatible ball brown base double ring getter structure. Measured value 50/48 (rejected value 30) There is a getter burn with a white box*The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
This is a replacement needle for the national cartridge EPC-05STA. Unopened and unchecked (Mizushima Itsuro)
Maintenance information: 2024.3.8 unchecked
Accessories: original box
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: power cable
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
Power cable 3.0 m A power cable that uses the company's KS-00 cable, uses an AET PSE-018V2HG as the outlet plug, and an AET PSE-320HG as the inlet plug. Compared to the predecessor, it is a monitor and high-resolution oriented model that has excellent high-frequency reproduction capability and resolution, and transmits sound images more clearly than ever before (Kojima Yosuke)
Accessories: none
※1 bottle only. This is a 10 cm full range unit from FOSTEX. It is a very popular model for those who make their own speakers. The sound quality is bright and has an impression of tension. Dull, there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.8.11 sound output tested
Accessories: manual, original box
Main specifications: full range aperture 10 cm maximum input 15 W 8 ohms magnetic flux density 13000 gauss baffle aperture diameter 9 cm recommended enclosure volume 15 L
The price has been drastically reduced! 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)