with cabinet! Maintained. A preamplifier that allows you to create a variety of sounds according to your own preferences. It is equipped with a music restoration system with 6 variable points! A high-end preamp that took the world by storm with its delicate, fine grainy sound. Even now, it is embedded in high-end systems and shows tremendous appeal. As for the exterior, there are scratches on the cabinet, scratches on the power supply unit, dirt, and surface deterioration. Serial 0049 (Sasaki Shota)
Maintenance information: 2025.1.17 Maintained (internal inspection, some solder fixes. Remove the volume SW, refine the disassembly contacts, and assemble after applying protective grease. Partially damaged volume replacement. Power supply unit internal inspection, partial solder correction. Fix the cable terminal for connecting to the power supply. Exterior cleaning, waveform confirmation, and sound output tests were performed) 2019.6.21 maintained (all power supply and main body deteriorated capacitors replaced, output volume replaced, muting relay replaced, other volume, switch contact cleaning, specification inspection, and inspection of each operation)
Accessories: instruction manual, power cable
Main Specifications: Input: Unbalanced (RCA) 5 Systems Output: Unbalanced (RCA) 2 Systems, Balance 1 System Main Unit: W483 x H186 x D335 mm Approx. 8.1 kg Power Supply Unit: W156 x H91 x D326 mm Approx. 2.3 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/10/17 sales price 99,800 yen Maintained! An MC-only phono equalizer released to commemorate the 25th anniversary of the birth of the LP12. It is designed so that the sound of the LP12 can be enjoyed at its best by simplifying the signal path and installing a low noise power supply. The center of gravity is low and the sound quality is high in texture, but surprisingly, it is compatible with the SPU and can be used for a wide range of purposes. There is a scratch on the top plate (Daiki Goto)
Maintenance information: 2024.10.17 Maintained (all 17 internal liquid leak capacitors have been replaced, pattern corrosion parts cleaned with leaked electrolyte, change the MUT drive circuit resistance constant, and MUT time (2sec) is controlled by adding a capacitor for time constants, and the operation is similar to the original. Lamp lighting operation (the lamp changes from green to red when overdrive is detected, and a return to green is confirmed during recovery)
Accessories: copy of manual, power cable
Main specifications: Phono equalizer for MC cartridges, input level 150 μ/480 μV, input cae impedance 1500/4.7 nF, W320 x H80 x D326 mm, 1.5 kg
* A remote control is included, but the remote control cannot be used due to a defect in the amplifier's main volume control IC. There is no problem using it as a normal volume without using a remote control. This is GOLDMUND's entry model (evolution specification). It is compatible with a wide frequency characteristic and dynamic range for SACD, etc. Although it is small, the firmness and subtlety of the sound core firmly inherits the sound of advanced models. The exterior also uses an acrylic top used in advanced models. There are scratches on the top plate on the exterior (Mizusaki Ryo)
Maintenance information: 2025.1.15 Maintained (remote control function removed, 8 electrolytic capacitors on the power supply unit were replaced, operation and various characteristics confirmed, running tests, and interior and exterior cleaning were performed)
Accessories: remote control, manual, power cable
Main specifications: 5 lines, input tape, 1 input, pre-out, 1 system with mute function, W300 x H65 x D295 mm, 4 kg
The price has been drastically reduced. 2025/1/5 sales price 25,000 yen. A balance line selector that is easy to use. It is 3 input systems/1 output system. The LR input/output terminals are arranged symmetrically, the LR internal wiring is also divided into left and right, and mutual interference between LRs is reduced by using a separate L/R structure (Murakoshi Yoichi)
Maintenance information: 2025.1.4 continuity confirmed
Accessories: none
Main specifications: W250 x H64 x D117 mm 2.3 kg
The disposal price has been reduced. Member prices are not applicable. 2025/1/4 sales price 59,800 yen A power supply system that further improves the sound quality of the Nmode half-size series. 4 X half size series units can be connected. Although it is the same housing, the power supply to the amplifier and the power supply circuit to the DAC/clock are separated to eliminate mutual interference (Kojima Yosuke)
Maintenance information: 2025.1.4 operation confirmed
Accessories: instruction manual, power cable, 2 types of DC cables x 2 each, original box
Main specifications: rated output current DC15V: Amplifier (1.2A 2 circuits), DAC/clock (0.8 A 2 circuits) W210 × H62 × D250 mm 3.5 kg
The disposal price has been reduced. Member prices are not applicable. 2025/1/4 sales price 118,000 yen A 1-bit amplifier that gained popularity due to its half size and high sound quality, a pre-main amplifier incorporating fundamental know-how into the X-PM3. The power supply circuit has been strengthened and the output has also been increased. The dynamic range has been greatly expanded, and the dynamism of the music is clearly reproduced even though it is half size (Kojima Yosuke)
Maintenance information: 2025.1.4 operation confirmed
Accessories: remote control, instruction manual, AC adapter, power cable, original box
Main specifications: 13W+13W (at 8 ohms) analog input 3 systems (RCA) clock input (clock frequency: 5.6448, 6.144, 11.2896, 12.288, 22.5792, 24.576 MHz) W210 x H62 x D250 mm 2.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/1/11 sales price 398,000 yen standard model of Levinson stereo power amplifier. The power is slightly modest compared to the company's No. 333L, but sound quality has been improved by shortening the circuit. The sound quality with a sense of speed and sharpness is truly excellent. The condition is generally good, although there are some minor scratches in several places. Serial 1647 (Yamato Yuki)
Maintenance information: 2025.1.11 operation confirmed
Accessories: copy of the instruction manual, power cable, short pin
Main specifications: 125W+125W (8Ω) dimensions W446 x H238 x D479 mm weight 45.0 kg
※There is no sound problem, but it will be handed over as is. The popular TOZZI ONE, equipped with a 5cm full range and a unique design, has arrived. Despite its compact size, this speaker features vivid mid-range sounds. There is a slight feeling of use on the exterior (Mizusaki Ryo)
Maintenance information: 2024.10.23 sound output confirmed
Accessories: instruction manual, copy
Main specifications: frequency band 85Hz to 23kHz sensitivity 85dB impedance 4Ω W200×H126×D200m weight 1.4kg/bottle
The price has been reduced. 2025/1/9 sales price 448,000 yen This is a late model of the C20 that underwent full maintenance from the condenser to the main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. There are small scratches and stains appropriate to the exterior model year. Serial 6L833 (Murakoshi Yoichi)
Maintenance information: 2025.1.7 Maintained (main volume replaced, shaft strengthened. AC 100 to 117 V operation checked) 2024.1.19 maintained (main volume disassembly, cleaning repair, 40/20 μF and other deterioration replacement 2, film capacitors replaced with 0.1 μF or other oil capacitors, 4 oil capacitors, 0.5 μF other noise and deterioration replacement, 17 units, electrolytic capacitors, 100 μF other deterioration replacement, 6 units, front lamp failure replacement/switching noise countermeasures → additional 1/4 W resistor ・Vacuum tube socket and RCA jack caulk repair)
Accessories: instruction manual (English copy)
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
The price has been drastically reduced. 2025/1/14 sales price 298,000 yen*Jumper cable replacement is cheap because there are many scratches. The MK2 model has further improved its degree of perfection since the HELICON 400. A speaker where you can feel the craftsmanship of a manufacturer called DALI. Not only does the cherry color give you a sense of luxury, but the high mid-high range with a unique luster and texture is attractive. The fresh, glossy tone of stringed instruments and female vocals is one of the best in the world. The emblem is misaligned, there is stickiness around the woofer, a line wound on the side, and a scratch on the front (Oikawa Tetsuji)
Maintenance information: 2025.1.14 Operation confirmed
Accessories: saran net, jumper cable (substitute), spike, spike receiver
Main specifications: 3 way 4 speaker bass range 165 mm cone type x 2 treble range 25 mm soft dome 10 x 55 mm ribbon tweeter banana plug compatible W264 x H1,026 x D490 mm weight 31.7 kg
The price has been reduced. 2025/1/17 sales price 498,000 yen Macintosh's modern power amplifier MC302. The thickness of the mid and low frequencies and the smooth, delicate tone are excellent. While ensuring 300W+300W of power, it is a modern model that is compatible with all genres with good sharpness and a wide range. The traditional jet black glass panel and the blue eyes meter that floats there are also alive and well. Serial AAV1394. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2025.1.14 sound output confirmed
Accessories: power cable
Main specifications: rated output stereo 300W+300W (2/4/8Ω) speaker output 1 system x 3 (for 2Ω x 1/4Ω x 1/8Ω x 1) input terminal/line RCA x 1 system/line XLR x 1 system W445 x H240 x D483 mm 44.5 kg
The price has been drastically reduced. 2024/1/16 sales price 348,000 yen Manufacturer maintenance including optical pickup replacement! DENON's top SACD player. In addition to the smooth sound quality typical of Denon, I also feel the range and thickness. It completely converts the information on the disc and lets you listen to high-accuracy sound. The digital input signal is compatible with sampling frequencies up to 192 kHz, so it can also be used as a high quality DA converter. There is a scratch on the front (Daiki Goto)
Maintenance information: mechanical control board defects, etc., SACD mechanical unit replacement, implementation of the latest firmware update, internal cleaning inspection, and long-term tests using various discs. USB operation confirmed. Initialize each setting and leave it in the factory state. Replace the optical pickup with a new one.
Accessories: remote control, power cable
Main specifications: SACD/CD player Advanced AL32 Processing digital input COAX, OPT 1 system, dimensions W457 x H150 x D416 mm weight 26.4 kg
Maintenance was carried out with attention to detail, such as replacing deteriorated parts and completely disassembling VOL and repolishing contacts! A kit model of a power amplifier using a 50CA10 3-pole output tube and an OY15 type output transformer, composed of circuits and parts conforming to the MQ60 type, which has been evaluated by LUXMAN. The sound of a vacuum tube has a sense of volume that seems to meet expectations, and it gently envelops you. The sound, which doesn't require scale, is particularly unique, and the slight thickness that spreads from below the mid-range makes you feel comfortable. There are scratches and dullness on the exterior due to use over time. Serial 574994 (Tomonori Asaine)
Maintenance information: 2025.1.18 Maintained (impedance switching SW, gain VOL complete disassembly contact refinement, oxidation and sulfidation prevention grease applied. Vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. Load test (8Ω load 1kHz 30W+30W), input/output waveform confirmation, sound output check performed)
Accessories: none
Main specifications: 30W+30W 50CA10 push pull W410 x H160 x D205 mm 13.8 kg
*Scratches and glass panel peeling are conspicuous, but are sold as is. IEEE1394 DSD compatible D/A converter. Large sound field space, delicate and smooth texture. The depth of the sound can be clearly felt, and it is a sound that cannot be experienced with other devices. Genuine Oba Shoji product. Serial ELG1357 (Daiki Goto)
Maintenance information: 2025.1.16 Operation confirmed (DSD sound test OK by connecting to Purcell 1394)
Accessories: remote control, manual, power cable, connection cable, 1394 cable, BNC cable
Main specifications: sampling frequency 32K/44.1K/48K/88.2K/96K/176.4K/192K/2.822M (DSD) digital input AES/EBU (XLR) 2 systems, SPDIF (RCA) 2 systems, SPDIF (BNC) 2 systems, TOS1 system, ST1 system, SDIF-2 (BNC) 1 system digital output SPDIF (RCA) 1 system word clock input BNC1 system
Word clock output, BNC1 system, analog output/balanced (XLR), 1 floating system (hot 2) /unbalanced (RCA) 1 system, W461 x H75 x D406 mm, 12 kg
This model is currently sold because manufacturer support has ended. Authentic TimeRoad product. D/D converter capable of upconverting to DSD. 44.1 kHz → DSD upconversion is possible by using it in combination with the opposite DCS Delius1394 or Elgar Plus. It is precise, increases in thickness, and changes to a vast scale. A normal D/A converter can also be used from 32 to 96 kHz, and if it is a DualAES compatible device, it is compatible up to 192 kHz. Please use D/A with DCS 1394 terminals for DSD conversion. Just converting from 16 bits to 24 bits is quite different. There is surface panel peeling (Daiki Goto)
Maintenance information: 2025.1.16 Operation confirmed
Accessories: remote control, manual, power cable, connection cable
Main specifications: sampling rate 32/44.1/48/88.2/96/176.4/DSD input word length 24 bit compatible digital input: XLR x 1, COAX x 1, BNC x 1 digital output: XLR x 2 (Dual AES compatible), RCA x 1, BNC x 1, 1394 x 1 W461 x H69 x D413 mm 7.9 kg
Audio-Technica headshell. This classic model is attractive for its stable popularity and high versatility. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.1.11 continuity confirmed
Accessories: none
Main specifications: magnesium alloy body weight 10g
The price has been drastically reduced. 2025/1/13 sales price 9,800 yen. An audio cable from the premium automotive cable brand “RegThat” that thoroughly pursues the best structure by making full use of the most advanced high-quality materials, RCA cable 1.3 m pair. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.1.13 continuity confirmed
Accessories: none
Power cable 0.9 m PSE standard product, LGC conductor, reduces distortion and improves SN, making the sound with good visibility and at the same time increasing the sense of dynamism (Murakoshi Yoichi)
Maintenance information: 2025.1.12 continuity confirmed
Accessories: none
The price has been reduced. 2025/1/12 sales price 20,800 yen. ※The separator is an external product, and it is inexpensive because there are many small holes in the tube. The speaker cable 2.5m pair terminal Y lug conductor uses a parallel array/helical DNA Helix design that enables accurate transmission of OFC high-purity copper. It is an easy-to-use model with a sense of transparency, wide range, and good balance with a slightly low center of gravity (Murakoshi Yoichi)
Maintenance information: 2025.1.12 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/12/23 sales price 198,000 yen It is a speaker system developed by incorporating S-5000 technology in pursuit of a higher degree of perfection while inheriting the appeal of the S-1000TWIN. It is a model that can be said to be the culmination of the “vertical twin system” with a virtual coaxial arrangement, and achieves both an excellent sound field feeling and a thick sound image. There are small scratches on the whole, and the board is torn at the bottom. Serial LI00553, LI00561 (Fujisawa Yukishi)
Maintenance information: 2024.12.23 Operation confirmed
Accessories: saran net
Main specifications: 2-way 3-speaker bass reflex type tall boy woofer/20cm cone type x 2, tweeter/3cm dome type+W/ F director frequency band 28 to 40,000 Hz impedance 6 ohms sound pressure level 91.5 dB dimensions W276 x H1,060 x D407 mm weight 44 kg
The price has been drastically reduced. 2024/11/18 sales price 99,800 yen The 684S2, which is the 5th generation of the 600 series, is in stock. The sense of realism and resolution are high, and it makes you feel the atmosphere of the PM1 and CM10, which are higher-level models. The design also stands out cleanly and is a size that is easy to use. The exterior has a bruise on the corner and a small scratch on the pedestal (Mizusaki Ryo)
Maintenance information: 2024.11.18 sound output confirmed
Accessories: round foot
Main specifications: 2-way floor type playback frequency 45 Hz to 50 kHz efficiency 87 dB impedance 8 ohm crossover 4 kHz W235 x H955 x D238 mm weight 14.2 kg
Heater transformer spare sale primary: 105-115-125V secondary: 6.3V/5A (with CT) W49 × H69 × D45 mm 0.5 kg/piece (actual measurement, not including protrusions) with original box exterior, terminals It seems to be an unused item from the condition! (Kojima Yosuke)
Accessories: original box
A sealed in-ear receiver incorporating technology from the famous MDR-CD900ST professional studio monitor headphone. It features a wide dynamic range unique to large aperture driver units (Ryo Mizusaki)
Maintenance information: 2024.9.24 sound output confirmed
Accessories: none
Main specifications: sealed dynamic impedance 16 ohms (at 1 kHz) sound pressure sensitivity 106 dB/mW playback frequency band 5 to 25,000 Hz
The price has been reduced. 2024/9/25 sales price 2,000 yen Earphones with a composite reinforced body made of carbon fiber and machined aluminum. The powerful, extruding sound is attractive (Mizusaki Ryo)
Maintenance information: 2024.9.25 sound output confirmed
Accessories: none
Main specifications: dynamic type 16 ohm 102 dB 4.8 g (excluding cord)
* Operation (DA output only) on previous generation iPad (model using Apple Dock connector) has been confirmed with the attached cable. This is a portable DD/DA converter that functions with a dedicated connection to an Apple product. The warm and powerful sound similar to the sound of ALO Audio is attractive (Kojima Yosuke)
Accessories: instruction manual, connection cable, fixed band, original box
Small headphones from Sennheiser. A perfect headphone debut with a well-balanced overall balance from bass to treble. Rather than sharp sounds, they are the type that enjoys the afterglow of the sound. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2024.9.7 sound output operation confirmed
Accessories: case
Main specifications: sealed dynamic headphone impedance 18 ohms playback frequency 16 Hz to 22 kHz sound pressure level 112 dB
The disposal price has been reduced. Member prices are not applicable. 2024/8/6 sales price 18,000 yen crossover 10,000 Hz board. Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: none
Main specifications: Compatible models F-5/F-15/F-15L attenuation characteristics -12, -18 dB/oct 10,000 Hz
*Currently sold. microphone amplifier It is possible to pick up and amplify sound with an AV device without a microphone terminal. There are no noticeable scratches on the exterior (Sasaki Shota)
Maintenance Information: 2023.8.11 Operation confirmed
Accessories: original box, power adapter, manual
Main specifications: W70 x H30 x D92 mm 160 g
Power transformer special order hammer tone color primary: 100V secondary: 5V/3A, 500-300-0-300-500V/0.2A, 6.3-7.5V/8A x 2, 6.3V/1A x 2 W120 x H105 x D105 mm 6.7 kg (actual measurement, not including protrusions) original box, and the state of the terminals with fixed nuts seems to be unused! (KOJIMA Yosuke)
Accessories: original box, fixing nut