Balance cable is a standard BELDEN line cable that clearly shows the outline of the 0.5 m pair sound and has a firm thickness, especially in the mid to low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.6 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/8/30 sales price 118,000 yen New dust cover created, arm disassembly, cleaning, etc. have been maintained with attention to detail! This is the entry model for the Yamaha GT series, which boasts strong popularity. This is an impressive car with a sturdy cabinet and heavyweight turntable. Earthquake resistance is also solid, and the balance between thickness and precise sound is excellent. Serial 209161 (Murakoshi Yoichi)
Maintenance information: 2024.8.30 maintenance completed (motor bearing, arm lifter grease up, arm disassembly, cleaning and adjustment, electrolytic capacitor replacement for power supply board and DD motor drive board, disassembly/cleaning of operation SW, turntable rotation speed check, arm needle pressure check, sound output check, simple exterior cleaning, comprehensive operation check inspection)
Accessories: instruction manual
Main specifications: static balance S-shaped arm applicable cartridge dead weight range 3 g to 12 g W532 x H212 x D406 mm 15.4 kg
Maintained! This network is used for A5, A7, etc. Unlike channel dividers, it is easy to handle, and the sound is familiar to the ear. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 Maintained (frequency characteristic check, ATT cleaning, terminal/screw cleaning, butyl tape removal work)
Accessories: none
Main specifications: crossover 500 Hz 8 ohms W123 x H140 x D132 mm 1.6 kg
※Only 1 speaker cable, 3.0 m, banana-banana terminal specifications are unknown; appearance, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.9.7 continuity confirmed
Accessories: none
Sony headshell with unknown model number. The finger plate and lead wire are missing. You can see a feeling of use such as dullness and chafing (Kanai Hidetsugu)
Maintenance information: 2024.9.8 continuity confirmed
Accessories: none
Main specifications: dead weight 11.5 g (actual measurement)
Full maintenance has been completed, from exterior repairs to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc., even now. Serial 12896 13197 (Mizushima Itsuro)
Maintenance information: 2024.9.7 maintenance completed (exterior repair/polishing/oil finish, front and rear baffle repair/painting, saran net replacement/frame repair. Woofer edge replacement, cone paper coating, terminal cleaning, screw replacement. Mid-edge replacement, cone paper coating, terminal cleaning, screw replacement. Driver magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter magnetic circuit rust removal/gap cleaning, terminal cleaning. Network frequency characteristic check, ATT switching SW cleaning, terminal cleaning, screw replacement, solder defect correction on one side coil)
Accessories: saran net, diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
BNC to coaxial cable 0.5m Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound (Yoichi Murakoshi)
Maintenance information: 2024.9.6 continuity confirmed
Accessories: none
Maintained including saran net cleaning and attenuator contact cleaning. JBL's classic monitor speaker. Although it is medium in size, its crispness and low-frequency extrusion feel are perfect for jazz and rock. The line is also thick, and it plays an amazing JBL sound. Serial J471-2 1272 J472-20973 (Murakoshi Yoichi)
Maintenance information: 2024.9.5 maintenance (saran net cleaning/repasting, frame repair. Network maintenance: frequency characteristic check, ATT cleaning, unit detachment, exterior repair/cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex bookshelf type 93dB 6Ω W362 x H597 x D298 mm 20 kg
The saran net has been replaced, and refreshed and maintained with ATT cleaning, etc. This is JBL's masterpiece monitor speaker 4312A black. It has flat characteristics like a monitor, but you can feel the push and sharpness typical of JBL throughout, and the sense of dynamism in the low frequencies in particular is a JBL sound. This is a perfect middle speaker for jazz and rock. The exterior has also been beautifully finished due to maintenance. Serial 76492 76767 (Murakoshi Yoichi)
Maintenance information: 2024.9.5 maintenance (saran net replacement, frame repair. Network maintenance: frequency characteristic check, ATT cleaning
(Detaching the unit, cleaning the exterior, re-attaching the bass reflex port)
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex impedance, 8 ohms, playback frequency band 45 to 15,000 Hz, W362 x H597 x D298 mm, weight 20 kg/book
Manufacturer maintenance completed, including laser pickup replacement! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. You can see a feeling of use on the exterior, such as dullness and abrasions all over (Kobayashi Hitoshi)
Maintenance information: 2024.9.5 manufacturer maintenance (laser pickup replacement, loading belt/tray opening/closing SW replacement, top cover/front panel cleaning, sound output test)
Accessories: remote control, instruction manual (copy)
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
*Spikes are out of stock. Manufacturer's maintenance completed! Equipped with a VRDS mechanism that stands out for its clarity of outline, amount of information, and subtlety. The well-contoured, unwavering sound is unique to this model. The freshness of the sound and the straight sound image are advantages that cannot be obtained on CDs in recent years. The exterior is dull and there are small scratches. Serial 0010046 (Murakoshi Yoichi)
Maintenance information: 2024.9.4 manufacturer maintenance (replacement of driving parts, operation test of each part, confirmation of remote control operation)
Accessories: remote control, instruction manual (copy), power cable (external product), transport lock
Main specifications: 20-bit DAC dimensions W442 x H145 (153 mm when using foot) x D344 mm weight 16.5 kg
This pan lock is used when storing an amplifier in a wooden case. The models that can be used are not known here, so please carefully check the target product to be used before purchasing. Exterior, paint peeling, rust, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: hole pitch 77 mm, rail length 143 mm, body size W33 x H106 x D325 mm (actual measurement)
The price has been reduced. 2024/5/22 sales price 12,000 yen. ※It is unclear whether it is a genuine product. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/8/6 sales price 65,000 yen Maintained! 120V specification Dinaco's transistor stereo power amplifier was developed by applying technology obtained with tubular amplifiers to semiconductor circuits. You can enjoy intense, dynamic expression without requiring precise sound expression. You can see the appearance, dullness, rust, scratches, etc. ※ Since it is not a DC amplifier, please connect the speaker cable before turning on the power when making sound (Kobayashi Hitoshi)
Maintenance information: 2024.8.6 maintained (poor power stage Tr deterioration, C deterioration in the board, AC cord deterioration → replacement. Operation check, block C status OK)
Accessories: none
Main specifications: 60W+60W W330 x H104 x D260 mm 8 kg
DENON analog player. The model is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. It's also a great model for getting started. You can see a feeling of use, such as appearance, dullness, abrasion, peeling veneer, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.2 operation confirmed
Accessories: shell cartridge, EP adapter, instruction manual, connection cable
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Unspecified headshell. The construction is solid. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.3 continuity confirmed
Accessories: none
Main specifications: dead weight 10.6g
HDMI cable 1.8m 1.3b category 2 old standard Uses high quality 28AWG copper conductors. Multi-layer shielding prevents signal deterioration from noise, etc. There is dirt all over and there is a feeling of use (Takasaki Atsushi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
HDMI cable 1.8m 1.3b category 2 old standard Uses high quality 28AWG copper conductors. Multi-layer shielding prevents signal deterioration from noise, etc. There is dirt all over and there is a feeling of use (Takasaki Atsushi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
RCA-5 DIN cable 0.5m RCA is a + long Switchcraft old type DIN cable with unknown details. Since number 3 is L+, number 5 is R+, and number 2 is connected to LR -, it can be used for QUAD input (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
5DIN-RCA cable 0.7 m connection cable for QUAD with unknown details. Since number 3 is L+, number 5 is R+, and number 2 is connected to LR -, it can be used for QUAD input (Takasaki Atsushi)
Maintenance information: 2024.8.30 Continuity confirmed
Accessories: none
This pan lock is used when storing an amplifier in a wooden case. The models that can be used are not known here, so please carefully check the target product to be used before purchasing. You can see the exterior, dullness, paint peeling, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: hole pitch 132 mm body size W32 x H155 x D345 mm (actual measurement)
Unopened This pan lock is used when storing an amplifier in a wooden case. The models that can be used are not known here, so please carefully search for the target products to be used before purchasing (Kobayashi Hitoshi)
Accessories: none
Main specifications: hole pitch 77 mm body size W33 x H109 x D370 mm (actual measurement)
Only 1 RCA cable for 0.2 m L only has an exterior, and both plugs are made of THORENS, and a feeling of use such as dullness, scuffs, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
1 bottle only. 0.3 m RCA cable 1 for R only. In addition to the exterior, the plug on one side is made of THORENS, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.30 Continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/8/13 sales price 12,800 yen. A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that has the lightness and strength essential for light needle pressure arms and heavy cartridges (Murakoshi Yoichi)
Maintenance information: 2024.8.9 sound output confirmed
Accessories: mounting screws
Main specifications: aluminum stamping dead weight 8g
The price has been reduced. 2024/8/25 sales price 1,100 yen. Speaker cable 1.4m end untreated Conductor OFC 0.5 mm2 appearance, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.8.23 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/8/13 sales price 12,800 yen. A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that has the lightness and strength essential for light needle pressure arms and heavy cartridges (Murakoshi Yoichi)
Maintenance information: 2024.8.9 continuity confirmed
Accessories: mounting screws
Main specifications: aluminum stamping dead weight 8g
HDMI cable 1.8m 1.3b category 2 old standard Uses high quality 28AWG copper conductors. Multi-layer shielding prevents signal deterioration from noise, etc. There is dirt and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
HDMI cable 1.8m 1.3b category 2 old standard Uses high quality 28AWG copper conductors. Multi-layer shielding prevents signal deterioration from noise, etc. There is dirt and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
Optical cable 1.5m square-round plug details unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
Stereo mini plug extension cable A stereo mini plug extension cable using a 3.0 m OFC conductor. Can be used to extend headphones, etc. (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
RCA cable 1.5m pair Audio-Technica's standard RCA cable. Uses OFC conductors. It comes in handy because it's easy to handle. There is dullness and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
This is an adapter for a NAGAOKA doughnut board. Essential for EP playback. It is machined from aluminum and has a sense of luxury. There is a small wound (Murakoshi Yoichi)
Accessories: none
Main specifications: machined aluminum, diameter 40 x height 9 mm, weight 20 g
Everything from exterior painting to driver gap cleaning has been refreshed and maintained with attention to detail! ※There is a tear repair mark on the mid-bass cone on one side. The original 4343 by All Alnico, the original 4343 of 4343! An unbearable gray finish model with crisp low frequencies and punchy high frequencies. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-mic recordings regardless of age or genre. Serial 16513 16199 (Murakoshi Yoichi)
Maintenance information: 2024.8.24 maintenance (one-sided mid-cone tear repair) 2019.4.14 maintained (terminal cleaning, insulation bushing and mounting screw replacement. ATT exchange. INT/EXT switch-over SW cleaning A frequency characteristic measurement check (~ 42 kHz) was performed, the 10 ohm resistor for the tweeter on one side was replaced, and the original capacitor was continued to be used. Check the input/output waveform and balance, and check the sound output. Woofer maintenance (edge replacement). Midmaintenance (edge replacement). Driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, screw replacement, terminal contact cleaning). Tweeter maintenance (magnetic circuit gap cleaning/center adjustment, screw replacement, terminal contact cleaning) exterior repair/gray paint. Front and rear baffle paint. Saran net replacement. Saran frame repair. Woofer midcone paper coating. Unit detaching/diffuser cleaning)
Accessories: saran net, diffuser
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
The price has been drastically reduced. 2023/9/28 sales price 700 yen. *Unopened item I opened it for photography. XLR cable 1.5m1 interconnect cable with the notation OFC AUDIO. XLR12C (male) - XLR311C (female) RoHS compliant (Hiura Katsuji)
Maintenance information: 2023.9.28 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/8/10 sales price 238,000 yen Maintained! 2022 glass panel has been replaced with a brand new one! A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. Serial JBZ6847 (Takasaki Atsushi)
Maintenance information: 2024.8.10 Maintained (SW/VOL complete disassembly, contact refinement, application of grease to prevent oxidation and sulfidation. Check input/output waveforms.)
2022.4.8 Maintained (each SW, VOL cleaning, lamp replacement. Pin jack cleaning. Panel replacement. Bridge diode replacement. Auto on-board capacitor replacement. Film capacitor replacement. Operation check. ※BASS, TREBLE GAR, and poor contact could not be removed. Noise is generated depending on position. (There will be gaps when switching, so please use it in the center position.)
Accessories: copy of the manual
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 2, AUX, TUNER, TAPE 1, 2 W406 × H138 × D330 mm 8.6 kg
Only 1 speaker cable is a standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 0.7 meter end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.12 continuity confirmed
Accessories: none
Only 1 speaker cable is a standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 0.7 meter end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.12 continuity confirmed
Accessories: none
The price has been reduced. 2024/8/18 sales price 3,000 yen. ※Finger hooks are inexpensive because they are replacements. Technica die-cast aluminum headshell. Although it is compact in size, it has high rigidity. Overhang and left/right tilt adjustments are possible. There are only different types of white lead wires. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: dead weight 14g (actual measurement)
The price has been reduced. 2024/8/17 sales price 4,000 yen. The X-series H-303X has a lead wire directly connected to the connector on the arm side. MICRO die-cast aluminum headshell. It is a well-built model that also has its own weight. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.16 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 11.0 g
The price has been reduced. 2024/8/12 sales price 2,500 yen. Black pioneer lightweight shell. It is a very easy to use headshell, made with full consideration for acoustic characteristics. There is a slight feeling of use on the exterior (Murakoshi Yoichi)
Maintenance information: 2024.8.9 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8.7 g
The price has been reduced. 2024/8/12 sales price 2,500 yen. Headshell with Denon logo The model number is unknown. The screw hole is a small hole type with adjustable overhang (Murakoshi Yoichi)
Maintenance information: 2024.8.9 sound output confirmed
Accessories: mounting screws
Main specifications: dead weight 9g (including screws)
The price has been reduced. 2024/3/17 sales price 2,500 yen. An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a finger-pointing split type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Fine gold series with 1.0m pair of RCA cables made of 99.997% OFC material. This is an entry-class, easy-to-use cable. You can see a feeling of use, such as appearance, dullness, corrosion, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.24 continuity confirmed
Accessories: none
※1 speaker cable with only 1.3 m end is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.12 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.12 continuity confirmed
Accessories: none
*One speaker cable is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.2 m end. This cable is thick and has a sense of extrusion in the mid-range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.8.12 continuity confirmed
Accessories: none
*Remote control is out of stock. It has a cigarette smell, so it's cheap. Although it is entry class, the sound quality is stable for any genre of music. Equipped with an alpha processor circuit, you can enjoy smooth, thick, and glossy traditional DENON sounds. There is a feeling of use such as dullness and dirt. Serial 8017250725 (Takasaki Atsushi)
Maintenance information: 2024.8.25 Operation confirmed
Accessories: copy of instruction manual
Main specifications: 2 analog RCA outputs (variable/fixed), 2 digital outputs (coaxial/optical), speed control function W434 x H134 x D340 mm 7.4 kg