Variable Resistor Attenuator Bridge T Type 21 Steps Maximum Attenuation 50 dB Impedance 600 Ohms W45 x 64 mm 140 g with Volume Knob (Kojima Yosuke)
Accessories: volume knob (attached to the main unit)
Comes with a power unit (GKP04). NF type phono equalizer with built-in MC head amplifier. The sound quality is slightly softer with lower distortion than the CR type. You can enjoy analog playback of an introductory pre-main amplifier more deeply. *The manufacturer recommends an output of 0.3 mV or more for MC, and the mm gain is 45 dB. Serial No. 718 (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: mm/MC switching input resistance mm/47 kΩ, MC/approx. 200 ohm W120 x H25 x D120 mm power supply unit W120 x H25 x D120 mm
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
YBA's high-precision line preamps equipped with independent left and right volumes are in stock for the first time at Hi-Fi! In addition to the supple and glossy tone unique to YBA, you can also feel the high level of separation, it is authentic. A CP machine with a high level of satisfaction over the price. The exterior is dull and has small scratches on the top plate. Serial P21900L (Yonejima Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: input: LINE/5 systems (RCA), output impedance: 20 ohms, output terminals: 2 systems (RCA) W430 x H83 x D330 mm, 5 kg
Internally and externally maintained! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. There is a very slight dent in the tweeter grill, and there are repair marks on the side (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
※Since it is cheap, it is currently sold. This is a thin center speaker. Since it has an anti-magnetic design, this model is easy to use and easy to combine with other speakers. Recommended for those who are building surround sound for the first time. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 sound output confirmed
Accessories: instruction manual, connection cord, original box
Main specifications: 2 way, 3 speakers, bass reflex system, center type, anti-magnetic design, playback frequency band 60 Hz to 20 kHz, 88 dB, 6 ohms, allowable input, 40 W, W435 x H100 x D221 mm, 2.2 kg
Full maintenance, such as internal and external maintenance, was carried out, and the finish was beautiful! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. Serial 55553L, 55553R (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (exterior repair/repaint) 2017.4.25 Maintained (exterior polishing/all coated woofer cone paper/unit frame paint chip putty repair grill dent correction/paint tweeter distortion and maintenance (edge deformation repair, magnetic circuit slit maintenance complete) unit detachment terminal replacement (banana plug compatible product) ATT cleaning capacitor replacement*Some capacitors before replacement Since it is difficult to remove, remove the wiring to check the remaining input/output waveform and balance, sound output check, frequency characteristic measurement check (~ 42 kHz)
Accessories: No accessories
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
The neat and precise design using birch wood and the beautiful tone without turbidity are unique to YAMAHA. It makes me want to play it in a tasteful way with a simple pre-main amplifier. The highly transparent, fresh sound fills the room comfortably. There are exterior, sunburn, bruises, and abrasions (Murakoshi Yoichi)
Maintenance information: 2024.5.29 sound output confirmed
Accessories: saran net
Main specifications: 2 way, 2 speakers, sealed system, bookshelf type, anti-magnetic design impedance 6 ohms, 86 dB, W205 x H382 x D285 mm, 9.5 kg/unit
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 9,800 yen*Currently sold, it is cheap because it is in poor condition. This model has a nicely looking model with units arranged in the center. It has excellent sharpness from low to high frequencies, and is perfect for those who listen to pop music. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 105025A 105025B (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: low frequency 18 cm cone woofer high range 3.5 cm dome tweeter impedance 6 ohm allowable input 70W W225 x H370 x D229 mm 5.4 kg/book
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Both the interior and exterior have been fully restored and refreshed! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. It is beautiful due to exterior repairs (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting. Saran net replacement/frame repair/reinforcement. Unit maintenance: low range/edge exchange, magnetic circuit gap cleaning/center adjustment, high pass/magnetic circuit rust removal/gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
Output transparent pair for push-pull output 40W primary: 8kΩ secondary: 4-8-16 ohms W83 x H104 x D78 mm 2.3 kg/piece with original box (no label on one side) There are scuffs and line scratches in places (Kojima Yosuke)
Accessories: original box
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/11 sales price 148,000 yen The BBC monitor speaker is equipped with an in-house manufactured unit based on the LS3/5A, and the phase characteristics and frequency characteristics of the mid to low range, and the responsiveness of music signals have been greatly improved. You can listen to traditional English sounds with a sense of calm. The exterior has a feeling of use such as dullness and small scratches. Serial 206B08481 206B08482 (Tomonori Asaine)
Maintenance information: 2024.5.11 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers sealed crossover 5 kHz impedance 8 ohms frequency characteristics 75 Hz to 20 kHz output sound pressure level 84 dB input terminal 4 mm terminal bywire compatible W165 ✕ H305 ✕ D 190 mm weight 4.6 kg
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
The disposal price has been reduced. Member discounts are not applicable. 2023/5/30 sales price 12,000 yen. Simple conduction has been confirmed, but the details have not been checked. Sony electret condenser microphone Can be used with AA batteries (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple conduction confirmed
Accessories: instruction manual, case, windscreen x 2, holder clip
Main specifications: frequency characteristics 40 to 15,000 Hz omnidirectional 250 ohms maximum input sound pressure level 122 dB
The disposal price has been reduced! (Member prices are not applicable) 2024/5/23 sales price 148,000 yen This is a Venere series bookshelf model designed with a sharp form, breaking away from conventional classical styles. It is a speaker with an excellent glossy, smooth high frequency, and you can enjoy a particularly beautiful sound with stringed instruments and vocals. Serial 0077513 0077513 (Yamato Yuki)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: Saran net original box jumper plate
Main specifications: Wave reflex bookshelf type unit tweeter 29 mm high resolution silk soft dome woofer 180 mm cone type frequency characteristics 45 Hz to 25,000 Hz output sound pressure level 88 dB/w/m 6 ohms size W246 x H449 x D336 mm 7.0 kg (1)
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The price has been reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
The price has been reduced! 2024/5/25 sales price 69,800 yen ※The exterior is in poor condition, so it's cheap. An upgraded model of PMC's small monitor DB1. It has excellent characteristics as a near-field monitor, and is characterized by good phase characteristics and rich spatial expression. It is a high-quality model that can be further upgraded by adding an amplifier. There are line scratches and bumps on the exterior. Also, there are cracks or tears in the urethane on the back. Serial 012503/012504 (Yonejima Satoshi)
Maintenance information: 2024.5.25 sweep test good
Accessories: saran net
Main specifications: 2 way 2 speakers, frequency characteristics, 50 Hz to 25 kHz, output sound pressure level, 87 dB, impedance, 8 ohms, dimensions: H290 x W155 x D240 mm (including grille), mass: 4.5 kg
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
An improved model with a high output of the MC20 up to 0.5 mV. It is an aggressive sound with a sense of dynamism and sharp sharpness. The response is good and the sharpness is perfect, so it's perfect not only for jazz, but also for rock, etc. (ASAINE Tomonori)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: none
Main specifications: MC type oval needle output voltage 0.5 mV frequency band 20 Hz to 30 kHz impedance 5 ohms needle pressure 1.8 to 2.2 g dead weight 10.7 g
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
※Since the cantilever is large and tilts to the right, it is inexpensive. Needle cover missing. The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments. There is a feeling of use on the exterior, such as dullness and scratches on the body (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output
Accessories: case
Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g
※This item is currently sold. Onkyo enabled speaker. It is a design that makes it possible to construct a Dolby Atmos sound field using sound reflection from the ceiling. Accessories such as brackets and cables are missing (Sasaki Shota)
Maintenance Information: 2023.12.11 Sweep Test Good
Accessories: none
Main specifications: sealed impedance 6 ohms, playback frequency band 90 Hz to 20 kHz, W120 x H155 x D153 mm, 1.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/18 sales price 79,800 yen ※It is cheap because the saran is torn or the speaker terminal LF+ on one side does not tighten until the end. Slim tall boy speaker MONITOR AUDIO's middle class, SILVER series, is now in stock. The RS8 has a delicate, highly clear mid to high range tone with good tightness in the low range. The owner has well-balanced characters that can be used from the living room to the tatami room. In addition to dullness and small scratches on the exterior, there is a feeling of use such as a tear on the saran net and sunburn on the main body. Serial 801702/801702 (Tomonori Asae)
Maintenance information: 2024.5.17 sound output checked (good sweep test)
Accessories: Saran net jumper cable (general purpose)
Main specifications: Format: 2.5-way 4 speakers, floor type (anti-magnetic), front & rear port, bass reflex impedance, 6 ohms, allowable input, 175 W, efficiency, 91 dB, frequency characteristics, 33 Hz to 25 kHz, W185 x H900 x D 270 mm, weight 21.0 kg
A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
Maintenance has been carried out and deteriorated capacitors etc. have been replaced! A newly created power supply is included. Genuine RF MC cartridge head amplifier The RCA terminal specification makes it easy to use, and has a separate power supply structure. The delicate, clear, and powerful sound is attractive (Daiki Goto)
Maintenance information: 2023.6.24 maintained (new power supply manufactured because the power module is defective but cannot be repaired, all deteriorated capacitors replaced, pin jack deterioration replaced, gain changeover switch replaced due to poor contact, each gain readjusted, operation inspected, (there are no current problems with the module)
Accessories: copy of instruction manual
Main specifications: Gain can be adjusted in 3 levels; input impedance can be used up to 45 ohms W175 x H60 x D210 mm 1.4 kg
Choke transformer 0.9 H/260 mA DC resistance 26.8 ohm (actual measurement) choke transformer mounted on A3600, etc. W55 x H71 x D50 mm 0.7 kg (actual measurement, not including protrusions) There are scratches and paint peeling in places (Kojima Yosuke)
Accessories: none
Since the condition is poor, such as cracks in the body, it is currently being sold. A small full-range speaker that is compact, can be placed freely, and has a gentle impression. The sound quality is soft and the sound is relaxed. You can see a feeling of use such as cracks, dullness, and abrasions on the exterior and body (Kobayashi Hitoshi)
Maintenance Information:2023.6.5 Operation confirmed
Accessories: none
Main specifications: full range compact speaker 8ohm maximum input 40W W230 x H150 x D163 mm 1.6 kg
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using JBL 2420/2440 (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (12 terminal terminal mounting screws, 24 insulating bushings, deterioration replacement, terminal cleaning attenuator, replacement crossover check OK for VR Gari)
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check)
Accessories: none
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained. The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has dullness and scratches due to use over time, serial 18254 18275 (Asaine Satoshi Law)
Maintenance Information: 2024.4.16 Maintained (Screws, Insulated Washer Parts Replacement Switch Contact Cleaning)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1 ohm diaphragm scratch) DCR (b/6.3 ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
Maintained! A network using excellent parts such as high-voltage nonpolar capacitors and coils using low-loss Orient Cores. The cross is easy to use at 500 Hz, and it is a very easy to use network for those who are assembled with drivers such as 375 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (12 terminal terminal mounting screws, 24 insulation bushings, terminal part cleaning, main unit internal check, attenuator VR replacement, crossover check)
Accessories: none
Main specifications: 2 way network, 500 Hz, 8 ohms