The details of the 1.2m Sennheiser recable are unknown, but it is a soft cable and easy to handle (Tamura Eiji)
Maintenance information: 2024.8.30 Operation confirmed (sound output confirmed on HD650)
Accessories: none
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
Replacement needle for YAMAHA cartridge CG-8000 Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for YAMAHA cartridge CG-6600S. Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
N-4500/2 compatible Yamaha CG-4500/2 replacement needle Operation has not been confirmed since there is no main unit (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
The price has been reduced! 2024/9/17 sales price 69,800 yen ALLEN & HEATH analog mixer. It has a reputation for its clear yet warm sound quality. It's a mixer where you can feel a pretty good sense of commitment. The exterior is dull, and threads are scattered here and there. Serial X43X (Satoshi Yonejima)
Maintenance information: 2024.9.17 Operation confirmed
Accessories: copy of instruction manual (English), power cord
Main specifications: frequency characteristics +/- 0.5dB 20Hz-20kHz crosstalk < -83dB or less, power consumption 30W W320 × H110 × D370 mm 5.1 kg
* There is no remote control, and there is no problem with the current operation, but since it is inexpensive, it is a CD player equipped with a K2 interface circuit, has plenty of functions, and is also attractive in terms of ease of use. It eliminates digital distortion caused by jitter (time difference distortion), ripple (waveform distortion), etc. There are threads and small scratches on the exterior, and deterioration can be seen on the inside of the tray (Kojima Yosuke)
Accessories: copy of the manual
Main specifications: W435 x H115 x D375 mm 9.3 kg
The disposal price has been reduced. Member prices are not applicable. 2024/3/12 sales price 34,800 yen It smells like air freshener, is cheap because ATT has a bad smell, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
The disposal price has been reduced. Member prices are not applicable. 2024/9/12 sales price 298,000 yen Maintenance completed! Redeemer tube power amplifier with MFA D75B power amplifier changed to triode tube connection specifications. It is designed to pursue pure tone with Class A operation. Bias adjustment with a meter is also easy to use, and you can adjust it yourself even when the vacuum tube is replaced (Yasuhito Koshihama)
Maintenance information: 2024.9.12 maintenance completed (6 block capacitors replaced due to electrolyte condenser fluid leak, mute switch, RCA jack replacement bias switch cleaning, vacuum tube pin cleaning*Bias and output sound checked. Output approx. 25 W in AC 100V environment (3 connections)
Accessories: power cable, circuit diagram, catalog
Main specifications: output 20W+20W actual measurement 25W+25W (3 connections) fixed bias method vacuum tube 6550 x 4 12AX7 x 2 6FQ7 x 2 OA2 x 2 W394 x H210 x D304 mm 29 kg
※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. It is an attractive amplifier with a maximum output of 100W during 4-channel operation, and the strength unique to commercial use. There is a feeling of use such as scratches and dullness on the exterior as a whole (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W x 4 (8 Ω continuous output) 100 W x 4 (4 Ω continuous output) 200 W (BTL 8 Ω continuous output) W480 x H88 x D417 mm weight 12.5 kg
The price has been drastically reduced! 2024/9/10 sales price 278,000 yen ※There is slight unevenness in the brightness of the LCD lamp. The successor to Wadia6. The transport part is equipped with a VRDS mechanism CMK4 equipped with a disc crimping mechanism that suppresses vibrations during rotation. The converter section uses a circuit configuration with a 32 times resampling rate and 21 bit accuracy. The thick, powerful outline and rich musicality are excellent. The exterior has dullness, threads, and small scratches. Serial 0272 (Yonejima Satoshi)
Maintenance Information: 2024.9.10 Operation confirmed
Accessories: remote control, spike holder, power cord
Main specifications: analog output/XLR x 1, RCA x 1, digital output/ST x 1, TOS x 1, COAX x 1, XLR x 1 W350 x H180 x D408 mm 17.0 kg
D terminal/RCA-D terminal/RCA cable 1.0 m There is a feeling of use due to appearance, dullness, friction, etc. (Kobayashi Hitoshi)
Maintenance information: RCA operation checked, D terminal unchecked
Accessories: original box
*Spikes are out of stock. Manufacturer's maintenance completed! Equipped with a VRDS mechanism that stands out for its clarity of outline, amount of information, and subtlety. The well-contoured, unwavering sound is unique to this model. The freshness of the sound and the straight sound image are advantages that cannot be obtained on CDs in recent years. The exterior is dull and there are small scratches. Serial 0010046 (Murakoshi Yoichi)
Maintenance information: 2024.9.4 manufacturer maintenance (replacement of driving parts, operation test of each part, confirmation of remote control operation)
Accessories: remote control, instruction manual (copy), power cable (external product), transport lock
Main specifications: 20-bit DAC dimensions W442 x H145 (153 mm when using foot) x D344 mm weight 16.5 kg
The price has been drastically reduced! 2024/5/20 sales price 89,800 yen Manufacturer maintained! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
common needle. Compatible cartridges are ONKYO DN-201, AKAI RS-90, MarantzCT-6S, etc. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges are Victor DT-59, ONKYO DN-68ST, etc. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-72D, TRIO N-64, Mitsubishi 3D-54M AKAI RS-77, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-78D, TRIO N-64, SHARP STY-129, Marantz CTS-143, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for Victor MD-1050Z, Z5P Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
VICTOR DT-51 and ST-51 compatible needles Unused, unopened Operation has not been confirmed. No warranty, sold as is (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Compatible needle for VICTOR MD-1013Z Unused, operation unconfirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: I think it is 2.5 to 3.5 g.
Victor DT-20 compatible CS-1021 and HMD-1008 compatible replacement needles Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The disposal price has been reduced! (Member prices are not applicable) 2024/8/30 sales price 118,000 yen Maintained at Yukim! The color luster of the initial aura recedes and the tone has a flat texture, but it can be said that it is an amplifier that meets the needs of the times with an exquisitely balanced sound structure regardless of the source and compact body. There are small scratches on the exterior. Serial 2000030 (Fujisawa Yukishi)
Maintenance information: 2024.8.30 manufacturer maintenance completed (volume pot cleaning, selector SW cleaning, board solder pattern verification correction, operation confirmation)
Accessories: copy of instruction manual, power cord
Main specifications: 65W+65W (8Ω) W430 × H61 × D310 mm weight 8.0 kg
The price has been reduced! 2023/12/26 sales price 25,000 yen ※ It is cheap because the screw fixing part is missing. The needle tip is JICO VN45HE. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. The tracing ability is extremely high, and it picks up the sound engraved in the sound groove without omission. The stylus is moving slightly to the left (Tamura Eiji)
Maintenance information: 2023.12.26 operation confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
The price has been reduced! 2024/8/13 sales price 35,000 yen The needle tip is the original VN35HE! It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. (FUJISAWA KOSHI)
Maintenance information: 2024.8.13 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV internal impedance 47 kΩ needle pressure 0.75 g to 1.25 g dead weight 6 g
The price has been reduced! 2024/7/24 sales price 35,000 yen original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. As for the exterior, there is oxidation and dullness on the front part of the body (Yonejima Satoshi)
Maintenance information: 2024.7.24 Operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
Pair tube large triode tube made in Japan Actual measured IP value: 46/44mA (the best standard IP value for this amplifier is 50mA) There are adhesive marks on the base part on one side, and the other side is inexpensive because there are few getters ※Sound is checked and plate current values are measured with a test amplifier, and it has been determined that operation is good (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2024/9/7 sales price 3,000 yen. Woofer for DVD surround system DHT-1000DV. It is a passive type with no high cut or volume features. If you've been looking for one, please take this opportunity. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.5 operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker 16 cm cone type, bass reflex, anti-magnetic design playback frequency band 25 Hz to 240 Hz maximum allowable input 80 W input impedance 6 ohms W270 x H312 x D288 5.9 kg
Onkyo component center speaker. How about for TV (Sasaki Shota)
Maintenance information: 2024.9.16 Operation confirmed
Accessories: none
Main specifications: W230 x H65 x 150 mm 1.1 kg
The price has been drastically reduced. 2024/9/7 sales price 4,000 yen. Front surround speakers for Denon's home theater system DHT-1000DV-2. Comes with a dedicated stand. There is a misalignment in the direction of the stand, but it cannot be adjusted. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.5 operation confirmed
Accessories: stand
Main specifications: 6Ω 89dB 80 to 80 kHz W105 × H170 × D126 mm 1.1 kg
The monitor-like sound is attractive. I have the impression that the low range is more characteristic than the mid to high range (Daiki Goto)
Maintenance information: 2024.8.29 Operation confirmed
Accessories: case, earpads
Main specifications: Inner ear (canal type) Input sensitivity: 124 dB/mW Frequency characteristics: 20 Hz to 18 kHz Impedance: 56 ohms Weight: approx. 15.3 g
The price has been drastically reduced! The display has been replaced at TEAC at the 2024/9/1 sales price of 39,800 yen! TEAC USB audio DAC In addition to existing file formats such as DSD2.8MHz and PCM192kHz files, it also supports playback of DSD5.6MHz files and PCM32bit384kHz files. There are small scratches on the exterior. Serial 0050324 (Yonejima Satoshi)
Maintenance information: 2024.9.1 manufacturer maintained (LED DISPLAY replacement. Each connector has been reworked and corrected. Inspection of all parts. Check, confirm operation)
Accessories: power cord
Main specifications: [Digital audio input] USB TypeB terminal x 1 (PCM data
Sampling frequency 44.1/48/88.2/96/176.4/192/352.8/384 kHz) COAXIAL/RCA terminals x 2 (PCM data sampling frequency 32/44.1/48/88.2/96/176.4/192 kHz) OPTICAL/square optical digital terminals x 2 systems (PCM data sampling frequency 32/44.1/48/88.2/96 kHz) [analog audio output] XLR terminal x 1 RCA terminal x 1, headphone output x 1, W290 x D244 x H81.2 mm, 4 kg
A tubular power amplifier kit sold to commemorate the launch of Stereo Sound's “Tubular Kingdom.” It has been developed and designed based on the concept of “letting as many people as possible enjoy the advantages of vacuum tube amplifiers,” and it achieves both high performance, high stability, and high reliability. The input is provided with independent left and right volumes so that it can be used even when directly connected to a CD player. Serial 257 (Yamato Yuki)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: none
Main specifications: 5881WXT/6L6WGC push pull/ultra linear connection vacuum tube 6L6WGC x 4, 12AU7 x 3 rated output 25W+25W (6Ω) output impedance 6Ω (suitable for 4Ω to 8Ω) W388 x H187 x D330 mm 19 kg
The price has been drastically reduced. 2024/9/15 sales price 138,000 yen This tubular power amplifier kit was sold to commemorate the first publication of Stereo Sound's “Tubular Kingdom.” It has been developed and designed based on the concept of “letting as many people as possible enjoy the advantages of vacuum tube amplifiers,” and it achieves both high performance, high stability, and high reliability. The input is provided with independent left and right volumes so that it can be used even when directly connected to a CD player. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.9.13 operation confirmed
Accessories: none
Main specifications: 5881WXT/6L6WGC push pull/ultra linear connection vacuum tube 6L6WGC x 4, 12AU7 x 3 rated output 25W+25W (6Ω) output impedance 6Ω (suitable for 4Ω to 8Ω) W388 x H187 x D330 mm 19 kg
*Currently sold. Denon's 5-row vari-control tuner for FM. The small size and retro design are eye-catching. You can enjoy both talk and music with a warm, unobtrusive tone. There is a feeling of use on the exterior such as scratches and dirt (Ryo Mizusaki)
Maintenance information: 2024.9.16 Operation confirmed
Accessories: none
Main specifications: FM exclusive 5-row varicon W369xH147xD281mm 6.8 kg
Replacement needle for TRIO/KENWOOD cartridge V-39MKIII Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for TRIO and KENWOOD V-36 cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needles for T-30 and V-30 TRIO KENWOOD cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The disposal price has been reduced! Member prices are not applicable. 2024/9/4 sales price 22,800 yen ※Since it is cheap, it will be handed over as is. It is an analog turntable with a built-in phono equalizer and a cartridge already attached. You can enjoy the sound of records with wireless headphones or wireless speakers using the built-in Bluetooth transmitter. There is a thin thread on the dust cover on the exterior. Serial 2070010 (Yonejima Satoshi)
Maintenance information: 2024.9.4 operation confirmed
Accessories: instruction manual, AC adapter, connection cord, original box, EP adapter
Main Specifications: Drive System: Belt Drive Attached Cartridge: VM Type Phono Equalizer: Compatible RPM: 33 1/3 rpm, 45 rpm Bluetooth Compatible: Ver. 4.0/Class2 W420 x H117 x D356mm 4.9 kg
The disposal price has been reduced. Member prices are not applicable. 2024/9/10 sales price 128,000 yen ※60 Hz specification. SME 3009S2IMP tonearm set! A floating turntable with a surprisingly simple structure. The characteristic sound of a belt drive and the sharp, clear tone with a knife edge are attractive. The entire cabinet is scratched and dull. (SASAKI Shota)
Maintenance information: 2024.8.16 Operation confirmed
Accessories: belt
Main specifications: 60 Hz specification belt drive 33/45 rotation (changed by changing belts) 3009S2imp: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g W460 x H179 x D387 mm weight 8.2 kg
Pure Class A operation phono equalizer that uses a CR-type equalizer that prioritizes sound quality. The circuit is compatible with both MC and MM cartridges, making it easy to use. The exterior is dull. Serial TEP60253 (Tomonori Asaine)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: power cable
Key Specifications: 15-position MC input impedance setting W232 ✕ H50 ✕ D174 mm Weight 3 kg
PIONEER PL-N9 compatible equivalent Replacement needle for PL-C9 It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
PIONEER PL-N9 compatible equivalent Replacement needle for PL-C9 It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box