The disposal price has been reduced! (Member discounts are not applicable) 2023/10/12 sales price 500 yen D terminal cable 1.0m titanium-containing sheath suppresses vibration and achieves high image quality. The exterior has a light feeling of use (Tomonori Asae)
Maintenance information: 2023.10.12 continuity confirmed
Accessories: original box
Fine gold series with 1.0m pair of RCA cables made of 99.997% OFC material. This is an entry-class, easy-to-use cable. You can see a feeling of use, such as appearance, dullness, corrosion, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.24 continuity confirmed
Accessories: none
Digital cable 1.0m RCA terminal It uses a titanium-containing sheath, OFC (oxygen-free copper) wire, gold-plated contacts that are resistant to aging, and a sturdy metal pin plug with strong reliability. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2023.7.20 Conductivity confirmed
Accessories: original box
RCA cable 1.5m pair Audio-Technica's standard RCA cable. Uses OFC conductors. It comes in handy because it's easy to handle. There is dullness and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.8.30 continuity confirmed
Accessories: none
Digital cable 1.0m round optical mini plug (optical digital voice) → square optical plug (optical digital voice) You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box
Speaker cable with 1.7 m pair ends using unprocessed OFC. This cable is simple and easy to handle. There is a feeling of use throughout (Murakoshi Yoichi)
Maintenance Information: 2023.9.5 Conductivity Confirmed
Accessories: none
The price has been reduced! 2024/5/11 sales price 500 yen Speaker cable 1.3 m pair end is an easy-to-use parallel type, and the conductor is a basic type of high-purity OFC cable made by stringing 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
※Only one speaker cable is a 3.0-meter untreated parallel type that is easy to use, and the conductor is a basic type of high-purity OFC cable made by twisting 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. There is a feeling of use of kusumi etc. (Jun Tamai)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The price has been reduced! 2024/6/20 sales price 1,200 yen speaker cable This is an orthodox parallel cable made by stringing 336 unprocessed 0.1 mm diameter wires at 3.1 m pairs. The exterior has a feeling of use such as discoloration and dullness on the sheath (Takahashi Nobuyuki)
Maintenance information: 2024.6.20 continuity confirmed
Accessories: none
The price has been reduced! 2024/5/9 sales price 1,000 yen speaker cable 1.3 m pair end unprocessed speaker cable 2.8 m pair end unprocessed soft introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Speaker cable 1.6 m pair end has an untreated appearance, dullness, scuffs, etc., and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.7.31 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/8/15 sales price 2,500 yen. It uses an RCA cable 0.7 m pair of LC-OFC conductors, and the sound is less annoying. The exterior has some dullness and disappearing characters (Murakoshi Yoichi)
Maintenance information: 2024.8.14 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/8/25 sales price 4,800 yen. RCA cable, 1.0 m pair, line cable using hybrid conductors of PCOCC and OFC. There is an appearance, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.8.23 continuity confirmed
Accessories: none
Speaker cable 1.7 m pair Speaker cable using Audio-Technica's signature technology PCCC conductor+ceramic insulator. There is a feeling of use on the exterior such as dullness and scratches (Asaine Tomoho)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
S terminal cable 1.3 m wire/PCCC+Hi-OFC hybrid conductor titanium compound+rheostoma sheath There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Technica's affordable MM cartridges. It's a solid sound with a sense of dynamism (Murakoshi Yoichi)
Maintenance information: 2024.9.10 sound output confirmed
Accessories: none
Main specifications: mm type oval needle, output voltage 5 mV, needle pressure 1.75 to 2.25 g, playback frequency 15 to 25,000 Hz, dead weight 6.2 g
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Exterior, dullness, missing rubber feet, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/2 sales price 2,000 yen. ※Hand over as is. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Tape is wrapped around the base of the AC adapter cord and a sticker is attached (Murakoshi Yoichi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, instruction manual, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
※There is no compatible device and it has not been checked. Audio-Technica D terminal video cable 1.3 m. There is an appearance, rubbing, and feeling of use (Kobayashi Hitoshi)
Maintenance information: Confirmation unconfirmed
Accessories: none
African paddock (solid wood) is used for the housing. It lets you hear deep bass and clear mid- to high-pitched sounds (Oikawa Tetsuji)
Maintenance information: 2024.8.18 Operation confirmed
Accessories: pouch
Main specifications: sealed dynamic type output sound pressure level 103 dB playback frequency band 5 to 35,000 Hz impedance 42 ohms cord 1.2 m mass (excluding cord) approx. 170 g
The disposal price has been reduced! Member prices are not applicable. 2024/9/4 sales price 25,000 yen XLR cable 0.7 m pair This is an interconnect cable from the current Fluat (Flute) series. Hi-Fi cable with minimal signal loss and distortion (Tamura Eiji)
Maintenance information: 2024.9.4 continuity confirmed
Accessories: none
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Sasaki Shota)
Maintenance information: 2024.7.29 continuity confirmed
Accessories: nothing
Main specifications: aluminum 15g
The price has been reduced. 2024/8/18 sales price 3,000 yen. ※Finger hooks are inexpensive because they are replacements. Technica die-cast aluminum headshell. Although it is compact in size, it has high rigidity. Overhang and left/right tilt adjustments are possible. There are only different types of white lead wires. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: dead weight 14g (actual measurement)
*Currently sold. microphone amplifier It is possible to pick up and amplify sound with an AV device without a microphone terminal. There are no noticeable scratches on the exterior (Sasaki Shota)
Maintenance Information: 2023.8.11 Operation confirmed
Accessories: original box, power adapter, manual
Main specifications: W70 x H30 x D92 mm 160 g
A dedicated transformer optimized for the DL-103. The thick, machined body is completely left and right independent to set the transformer, and you can enjoy beautiful, transparent sound in combination with direct wiring from the input terminal to the transformer body. The exterior is dull and there are scratches on the front panel (Takahashi Nobuyuki)
Maintenance information: 2024.9.5 continuity confirmed
Accessories: none
Main specifications: MC transformer boost ratio 1:10 compatible impedance 3 to 40 ohms dimensions W135 x H52 x D102 mm dead weight 1.3 kg
*Currently sold. The final model of the DENON step-up transformer using all LC-OFC lines. Small and affordable, yet clear sound with high S/N. It is a versatile type that is compatible with various cartridges from 3 to 40 ohms. There are no visible scratches on the exterior, etc., and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2024.7.29 Operation confirmed
Accessories: none
Main specifications: All LC-OFC lines used, LR independent permalloy double shield compatible cartridge impedance, 3 to 40 ohms, boost ratio 1:10, connection cord, 40 mm, frequency characteristics, 20 Hz to 50 kHz, W50 x H37 x D110 mm, 260 g
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Transistors, capacitors, and many other parts have been replaced and refreshed and maintained! The highest-end model of yesteryear. By actively replacing deteriorated parts, the sound has become brighter, and the original momentum has been revived. It is particularly compatible with the JBL Lancer series. The exterior is dull, etc., but it has been good since the year it was released. Serial 230060053 (Yonejima Satoshi)
Maintenance information: 2024.9.2 operation confirmed 2024.7.8 maintained (capacitor, transistor, heat dissipation sheet, semi-fixed resistor, fuse replacement. Create an SP terminal. Various SW and VR internal cleaning Clean each board contact. Solder again after removing the old solder. Internal and external cleaning, idle DC offset adjustment. Various inputs and audio output tests have been performed on all SP terminals)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) frequency characteristics 5Hz to 100kHz tone control/bass, midrange, treble 3-stage adjustment W462 x H155 x D316 mm 17.5 kg
Maintained! Pre-main amplifier equipped with a linear-step MC transformer. Supported by SANSUI's traditional strong power supply, it has stable driving power, and the sound is dense in the mid-range. It is compatible with JBL 43 series monitors, and is characterized by strength not found in late SANSUI amplifiers. The exterior is peeling on the side wood veneer corners, and there is a slight feeling of use such as small scratches. Serial 821090015 (Murakoshi Yoichi)
Maintenance information: 2021.3.6 Maintained (main amplifier transistor and output relay replacement, headphone relay replacement, input selector, recalout switch disassembly and polishing, power supply floating resistor replacement, solder repair, each volume, switch cleaning, interior and exterior cleaning inspection, operation confirmation. ※There is a slight roar from the power transformer. There is no effect during the audition, but when there is no sound, you can tell by attaching your ear to the main unit. (The same applies to other models of the same type.)
Accessories: instruction manual (copy)
Main specifications: effective output 120W+120W W463 x H160 x D444 mm 17.7 kg
The disposal price has been reduced (member prices are not applicable). 2024/7/25 sales price 298,000 yen Maintained. A rare item! Tannoy's separate 2-way speaker. Details are unknown, but the cabinet appears to be a Tannoy original box (there is a serial stamp on the cross section on the back of the enclosure). It's similar to Chatsworth, but the depth of the box is quite short and is sized to fit a woofer just right. A relay type speaker terminal block is attached to the bottom (terminals have not been replaced in consideration of the original). The woofer is 12 inches and has an inverted rubber roll edge. As you can imagine from the thinness of the box, it is not suitable for orchestras with a lot of sounds, but you can enjoy a life-size vivid sound with an acoustic sound source (Sasaki Shota)
Maintenance information: 2024.7.25 Maintained (exterior repair/polishing/clear finish. (Single-sided tweeter repair) 2020.7.1 maintenance completed (input/output waveform and balance check, frequency characteristic measurement check (~ 42 kHz) performed, and the capacitor was used as it was originally. Exterior repair/polishing/clear finish, saran net cleaning, fraying repair, retensioning, woofer maintenance (center adjustment on one side), tweeter maintenance (magnetic circuit gap cleaning/center adjustment, resonance area noise prevention))
Accessories: none
Main Specifications: 2 Way 2 Speaker Woofer LSU/LF/12F Tweeter LSU/HF/1 Network A27836 15Ω W430 × H828 × D177 mm 13.3 kg (actual measurement)
This transformer is the best match for the company's DL-S1 and DL-103 series. You can enjoy the depth and luster of a clear, natural sound. The large amount of information unique to high-end machines brings out even the smallest details of the characters on the cartridge. There is slight dullness and small scratches (Takasaki Atsushi)
Maintenance information: 2024.9.14 sound output confirmed
Accessories: original box, instruction manual
Main specifications: 6N wiring material compatible impedance 3 to 40 ohms 10 to 80,000 Hz boost ratio 1:13 W 150 x H70 x D 175 mm 3.2 kg
※Since the video system has not been checked, it is currently being sold. 7.2ch AV amplifier compatible with Dolby Atmos. It has a wide range and also produces powerful low frequencies. The antenna is out of stock. There is a scratch (Daiki Goto)
Maintenance information: 2024.9.15 Operation confirmed
Accessories: remote control, copy of manual, power cable
Main Specifications: Rated Output Front/125W+125W Center/125W Surround/125W+125W Surround Back/125W+125W Frequency Characteristics 10Hz to 100kHz W434 × H167 × D379 mm 12.6 kg
Horn tweeter with a rare coral network. Simply connecting to your speaker system will improve the overall quality of the system. Equipped with a horn-shaped tweeter H-60. It has a built-in network and a continuously variable level controller. Small scratches and dullness can be seen on the exterior. Serial 11345, 11496 (Fujisawa Yukishi)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: No accessories
Main Specifications: Super Tweeter System 8Ω 20W Playback Frequency Band 7kHz to 22kHz Cutoff Frequency 7kHz (12dB/OCT) Output Sound Pressure Level 107dB W112 × H152 × D140mm 970g
An improved version of the BC-1 standard monitor broadcast by the British BBC, a model that plays British sound attractively. The brilliance and elegant expression of the classical sound source strings and vocal music are workmanship that can be said to be the prototype of the beautiful sound of European models. The internet has changed, and the emblem is out of stock. The exterior is serial 6353 and 635 (Fujisawa Yukishi)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: Saran net (non-genuine)
Main specifications: 3-way bass reflex type 8Ω 50W W305 x H635 x D298 mm 14 kg
The price has been drastically reduced. 2024/7/22 sales price 3,500 yen. Bluetooth adapter compatible with SBC and aptX codecs. It can be used by connecting to the company Azur851D, StreamMagic6, V2, StreamMagic6, DacMagic Plus, and NP-30. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.7.22 operation confirmed (confirmed with DacMagic Plus)
Accessories: original box
The price has been drastically reduced. 2024/9/13 sales price 23,800 yen. It combines a sparkling high range typical of infinity with a deep mid-low range that looks just right. It seems to be able to handle any genre, but the whole thing plays back with a modern sound. It's a bookshelf size that sits slightly on the back, so you can feel the infinity sound exactly. The exterior has dents, scratches, and dents on the woofer on one side (Hiura Katsuji)
Maintenance information: 2024.9.13 sound output confirmed
Accessories: instruction manual
Main specifications: 52Hz to 40kHz 90dB 8Ω W225 x H350 x D330 9.4 kg
Comes with original box! This is a premium product with limited domestic sales. This model was sold in 2009 as a set of C22 and MC75 replicas as a Macintosh 60th anniversary model. Only the C22 is in stock this time. Fifty years have passed since the 1960s, when the Macintosh brand continues to evolve, and it has reigned majestically as the pinnacle of modern vacuum tube amplifiers. Other than a small scratch on the upper front edge, it's fine. Serial AAH1149 (Fujisawa Yukishi)
Maintenance information: 2024.9.16 Operation confirmed
Accessories: remote control, copy of instruction manual, power cord, original box
Main specifications: Vacuum tube 12ax7x2 (LINE), 12ax7x2 (PHONO/MC) input terminals LINE x5 (XLRx2 combined), PhonOX2 (MC/MM) output terminals “pre-out” RCAx 1, “tape out” RCAx 1, “tape out” RCAx 1 frequency band 20Hz to 20kHz (+0/-0.5dB) /10Hz~100kHz (+0/-0.1dB) W445×H2× D410mm weight 19.7kg
The delicate and subtle sound, full of dynamism, is attractive. The volume knob is equipped with an AAVA volume control that uses a high rigidity/high accuracy volume sensor cut from an aluminum block. You can feel the fine particle feeling that comes from the height of SN. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.19 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Total harmonic distortion ratio 0.005% SN ratio at rated output balance/unbalance, both 109 dB input terminal balance (XLR) systems, 5 unbalanced (RCA) systems, 2 output terminal balance (XLR) systems, 2 unbalanced (RCA) systems, 2 unbalanced (RCA) systems W465 x H150 x D409 mm 19.2 kg
A preamp with a simpler configuration for the company's C50. This model is equipped with a USB terminal and optical/coaxial digital input terminals on a 32-bit DAC, and is compatible with expanding digital audio files. It is also equipped with a traditional Macintosh 5 channel band equalizer and mm/MC phono circuit. You can enjoy the wide range of modern McKinn sounds. There is a feeling of use such as dullness over time, but it is generally good. Serial AVC1209 (Yamato Yuki)
Maintenance information: 2024.9.17 Operation confirmed
Accessories: Replacement remote control power cable instruction manual in preparation
Main specifications: input terminal line RCA x 6 systems, line XLR x 2 systems (MM/MC) digital USB x 1 system, coaxial x 2 systems, optical angle type x 2 system recording output terminal/RCA x 1 system pre-out terminal RCA x 2 systems, XLR x 2 system dimensions W445 x H152 x D457 mm weight 11 kg
HDMI cable 1.8m 1.3b category 2 old standard Uses high quality 28AWG copper conductors. Multi-layer shielding prevents signal deterioration from noise, etc. There is dirt and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
HDMI cable 1.8m 1.3b category 2 old standard Uses high quality 28AWG copper conductors. Multi-layer shielding prevents signal deterioration from noise, etc. There is dirt all over and there is a feeling of use (Takasaki Atsushi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
HDMI cable 1.8m 1.3b category 2 old standard Uses high quality 28AWG copper conductors. Multi-layer shielding prevents signal deterioration from noise, etc. There is dirt all over and there is a feeling of use (Takasaki Atsushi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
HDMI cable 1.8m 1.3b category 2 old standard Uses high quality 28AWG copper conductors. Multi-layer shielding prevents signal deterioration from noise, etc. There is dirt and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
The price has been reduced. 2024/8/6 sales price 18,000 yen crossover 10,000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: none
Main specifications: Compatible models F-5/F-15/F-15L attenuation characteristics -12, -18 dB/oct 10,000 Hz
The price has been reduced. 2024/8/6 sales price 15,000 yen Crossover board crossover frequency 1000 Hz for F-5/F-15. The damping slope can be changed with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: original box
Key Specifications: Crossover 1200Hz Chandeber Board
The disposal price has been reduced! Member prices are not applicable. 2024/5/15 sales price 29,800 yen A low cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
The price has been reduced. 2024/8/12 sales price 54,800 yen This is a valuable Philips Meca & DAC7 CD player. It is also equipped with a DAC function that allows you to enjoy bitstream sound quality. It is a high cost performance model that also features a compact and slim design. The exterior is scratched on the remote control, and there is dullness throughout. Serial MZ000149470018 (Sasaki Shota)
Maintenance information: 2024.8.12 operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: input/output terminals digital coaxial output/1 system/digital optical output/2 analog unbalanced output/1 system/digital coaxial input/1 system/digital optical input/1 system CDM-12.1 sampling frequency 32kHz, 44.1kHz, 48kHz W458 x H83 x D315 mm 7.8 kg