Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi) Maintenance information: 2024.5.14 Operation confirmed Accessories: copy of instruction manual, power cord, connection cord, spike base, original box Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
- description
- The price has been reduced. 2024/6/2 sales price 118,000 yen Maintenance completed! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check) Accessories: instruction manual (copy) Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
- description
- The price has been reduced! 2024/6/8 sales price 298,000 yen Maintained! A player equipped with a genuine SME 3010R black model for the 100th anniversary Centennial. This is a famous machine that perfectly matches the high sense of resolution unique to SMEs and the individuality of the supple TD126. The quietness of the floating suspension and belt drive and the analog sound with a low center of gravity are excellent words. The relatively compact housing, ease of use, and good balance in terms of sound quality are also attractive. The exterior has dullness and scratches. Serial 66529 (Fujisawa Yukishi) Maintenance information: 2024.6.8 Maintained (replaced due to poor contact with the display lamp. Servo circuit electrolytic capacitor replacement. Cleaning between armweights and shafts. Clean the arm clamp area. Loosen and re-tighten the upper arm screws. Strobe mirror cleaning. Elevation belt and turntable belt replacement The PU cord ground wire has been repaired. (Arm operation, voice check OK) Accessories: instruction manual, phono cable Main specifications: belt drive, 33/45/78 rotation compatible, W505 x H170 x D395 mm, 14 kg, arm part: static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), adjustable needle pressure range 0 to 5 g
- description
- Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji) Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection) Accessories: copy of instruction manual, optional weight Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
- description
- 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. Serial 2172380ZGD00103 (Fujisawa Yukishi) Maintenance information: 2024.6.2 operation confirmed Accessories: power cord Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
- description
- 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji) Maintenance information: 2024.5.26 sound output confirmed Accessories: instruction manual, power cable, original box Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
- description
- Power supply/heater transformer primary: 100V secondary: 6.3V/4A, 7-6.3-5-5-6.3-7V/5A × 2 W130 × H150 × D130 mm 8.1 kg (actual measurement, not including protrusions) There are scratches in places (Yosuke Kojima) Accessories: none
- description
- Power transformer primary: 100V secondary: 7.5-6.3-0-6.3-7.5V/3A (2 circuits) W90 × H121 × D90 mm approx. 3.6 kg (actual measurement, not including protrusions) There is a fine bruise (Kojima (Yosuke) Accessories: none
- description
- Maintained, with remote control! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. There are small scratches and dullness overall (Oikawa Tetsuji) Maintenance information: 2024.6.4 Maintained (Electrolytic capacitors were replaced due to faulty capacitors in the power supply unit and motor unit) Accessories: power supply unit, remote control, copy of instruction manual Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
- description
- Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto) Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.) Accessories: EP adapter Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
- description
- The battery has been replaced! AC & DC operation is possible. Technics slim control amplifier. This car has few quirks, and its straightforward, natural tone is impressive. It is a thin, space-saving model, and is recommended as a separate introductory machine. There are multiple scratches on the top plate on the exterior (Mizusaki Ryo) Maintenance information: 2024.6.1 maintained (battery created and installed, encoder etc. cleaned, solder corrected, charging operation checked, AC and DC operation checked, audio checked for each input/output) Accessories: remote control, instruction manual, power cord Main specifications: PHONO input (MM/MC) equipped with 2 output systems W430 × H70 × D307 mm 3.3 kg
- description
- The price has been reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima) Maintenance information: 2024.5.12 operation confirmed Accessories: power cord, connection cord, EP adapter, subway, original box Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
- description
- A new standard model for the SL-1200 series, inheriting the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There are small scratches and threads on both the body and dust cover on the exterior (Mizusaki Ryo) Maintenance information: 2024.6.7 operation confirmed Accessories: instruction manual, power cord, RCA cable, earth cable, original box, subway, shell Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
- description
- ※ Sub weight is missing. Dust cover hingeless design 5th generation of the SL-1200 series. This is a high-grade model manufactured to commemorate the 30th anniversary. Its accuracy and durability are outstanding among many players, and it features clear sound with clear outlines. There is dullness, small scratches, and threads on the dust cover (Daiki Goto) Maintenance information: 2024.6.11 operation confirmed Accessories: dust cover, EP adapter Main specifications: manual quartz direct drive 33/45 rotation universal S-shaped tone arm static balance type needle pressure adjustment range 0 to 4 g W453 x H162 x D353 mm 11.7 kg
- description
- The price has been reduced! 2024/6/1 sales price 118,000 yen A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine) Maintenance information: 2024.5.26 Operation confirmed Accessories: Remote control power cord (general purpose) Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
Manufacture:TEAC
Price: JPY 54,364 Sold Out
- description
- TEAC digital recorder. You can easily record in high resolution quality to an SD card or CF (compact flash) card. It is equipped with a wide variety of terminals, making it easy to connect to your own devices. I'm also happy that it is DSD compatible, and the quality of the recording is surprising considering the price. There is a slight feeling of use and small scratches on the exterior (Murakoshi Yoichi) Maintenance information: 2024.6.8 simple recording, playback confirmed Accessories: instruction manual, power cable Main specifications: Compatible media SDHC card (4GB to 32GB), SCXC card (64GB to 256GB), CF card (1GB to 128GB), USB memory (2GB to 64GB) recording and playback format: PCM (sampling frequency 44.1k/48k/88.2k/96k/176.4k/192 kHz, data length 16 bits/24 bits), DSD (sampling frequency 2.8224m/5.6448MHz) W442×H56×D305mm 4.4 kg
- description
- Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki) Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated. (Check operation) Accessories: instruction manual copy remote control (for VRDS-15) Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
- description
- Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts) Accessories: remote control, copy of instruction manual, lock key Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
- description
- The price has been drastically reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi) Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation Accessories: remote control, power cord Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
- description
- Taok's popular 4-tier audio rack. Strong construction typical of TAOC. It tightens the tone of the audio system. The length of the pole has been changed from the original. Scratches are conspicuous (Daiki Goto) Accessories: instruction manual Main specifications: W600 x H920 x D520 pole length 350, 250, 200 mm weight 21 kg (actual measurement)
- description
- The disposal price has been reduced! Member discounts are not applicable. 2023/5/9 sales price 17,000 yen set of 4. A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho) Accessories: none Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1
- description
- Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi) Accessories: none Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
- description
- Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi) Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement) Accessories: saran net Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
- description
- Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine) Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable) Accessories: saran net Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
- description
- Both the interior and exterior have been fully restored and refreshed! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. It is beautiful due to exterior repairs (Sasaki Shota) Maintenance information: 2024.5.10 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting. Saran net replacement/frame repair/reinforcement. Unit maintenance: low range/edge exchange, magnetic circuit gap cleaning/center adjustment, high pass/magnetic circuit rust removal/gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning) Accessories: none Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine) Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment) 2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction) Accessories: none Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
- description
- The price has been drastically reduced. 2024/5/12 sales price 99,800 yen It has a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it regardless of genre even with 2CH as it is. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.10 Operation confirmed Accessories: zipper cross grill Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
- description
- Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke) Accessories: mounting nuts, original box
- description
- Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke) Accessories: mounting nuts, original box
- description
- Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke) Accessories: mounting nuts, original box
- description
- Power transformer primary: 100V secondary: 5V/3A, 2.5-6.3V/5.2 A x 2, 6.3V/3A, 360-400-450V/170mA W120 x H95 x D105 mm 5.3 kg (not including protrusions) There are abrasions and line scratches in places (Kojima Yosuke) Accessories: none
- description
- Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke) Accessories: stay (main unit attached)
- description
- Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke) Accessories: stay (main unit attached)
- description
- Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke) Accessories: original box, manual, fixed stay, fixed nut
- description
- Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke) Accessories: original box, manual, fixed stay, fixed nut
- description
- ※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji) Maintenance information: 2023.10.1 sweep check OK Accessories: none Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
- description
- Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke) Accessories: none
Manufacture:SWING
Price: JPY 455
- description
- SWING velvet record cleaner. On the exterior, there is a feeling that the case lid is missing, faded, dull, etc. (Kobayashi Hitoshi) Accessories: case bottom Main specifications: W88 x H60 x D33 mm, weight 18 g (main unit only)
- description
- ※Set of 2 (not treated as a pair since the internal shape is different between the tubes) KT88 compatible balls, Russian metal brown, base code: 0210/0601 measured value 56/50 (rejection theory 44) with original box ※ measured values indicate GM values measured with the TV-7 testing machine (Kojima Yosuke) Accessories: original box
- description
- The price has been drastically reduced. 2024/6/8 sales price 128,000 yen Sun Valley 6550 push pull The design imitates Macintosh amplifiers of yesteryear. The sound design is bright, energetic, and supple, and has excellent sharpness that is more responsive than a normal transistor amplifier. There is dullness, dirt, small scratches, and dullness on the metal part of the power cord (Murakoshi Yoichi) Maintenance information: 2024.6.7 sound output confirmed Accessories: power cord Main specifications: 6550 push-pull rated output 40W+40W using vacuum tube 6550, EL84 x 4 (SOVTEK), 12AX7EH x 2 (electro-harmonix) 4Ω/8Ω compatible W430 x D270 x H200 mm 18 kg
- description
- 2024.4 Maintained! Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a higher frequency extension than the A730, and the overall balance from bass to treble is good, and the sound has a solid sense of sound pressure. There is dullness and small scratches all over the exterior (Kobayashi Hitoshi) Maintenance information: 2024.4.7 Maintained (CD mechanical pickup is movable by checking, dismantling, check assembly → reading OK. All other internal parts of the NG part have been replaced. CD disc plate replacement ~ aging test 6 days ~) Accessories: power cord, instruction manual (copy) Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2023/5/11 sales price 148,000 yen The BBC monitor speaker is equipped with an in-house manufactured unit based on the LS3/5A, and the phase characteristics and frequency characteristics of the mid to low range, and the responsiveness of music signals have been greatly improved. You can listen to traditional English sounds with a sense of calm. The exterior has a feeling of use such as dullness and small scratches. Serial 206B08481 206B08482 (Tomonori Asaine) Maintenance information: 2024.5.11 operation confirmed Accessories: saran net Main specifications: 2 way 2 speakers sealed crossover 5 kHz impedance 8 ohms frequency characteristics 75 Hz to 20 kHz output sound pressure level 84 dB input terminal 4 mm terminal bywire compatible W165 ✕ H305 ✕ D 190 mm weight 4.6 kg
- description
- *This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior (Mizusaki Ryo) Accessories: none Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
- description
- *This is a custom-made product that is 90mm wider than SAP-1863. Since it does not come with a stand, it does not stand on its own. Sound Hunter's sound panel using cherry wood. Sound quality can be easily adjusted simply by installing it in a room. The balance between reflection and sound absorption is good, and it creates a natural spread of sound. There are tape marks on the exterior and scratches on the back (Mizusaki Ryo) Accessories: none Main specifications: W720 x D50 x H1800 mm weight 13.4 kg (actual measurement)
- description
- The disposal price has been reduced! (Member price not applicable) 2024/5/24 sales price 128,000 yen A digital amplifier equipped with a Tripath class T PWM amplifier IC. It beautifully expresses the sense of energy and description. Gain can also be switched on the back, and it is compatible with a wide range of input sources. On the exterior, there are oxidation and scratches on the manufacturer logo. Serial 100210015 (Tamura Eiji) Maintenance information: 2024.5.24 Operation confirmed Accessories: instruction manual, power cable, spike Main specifications: output 150W+150W (8Ω) 240W+240W (4Ω) W420 x H98 x D395 mm weight 13 kg
- description
- The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso) Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test) Accessories: copy of instruction manual Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
Manufacture:SONY
Price: JPY 1,818(pair)
- description
- Sony Theatre System Tallboy Speaker The sweep test is good, but since the corn paper has dents, it is currently sold at a low price. This speaker is easy to use with both front and rear speakers. There are small wounds and dullness (Sasaki Shota) Maintenance information: 2024.3.18 Operation confirmed Accessories: nothing Main specifications: W60 x H1050 x D60 mm bottom 250 mm weight 3.4 kg (actual measurement)
- description
- ※There is no problem with operation, but it is currently sold because it is cheap. Sony ES series power amplifier using a G chassis. It's an easy-to-use model with an unobtrusive tone, and it makes you feel the power of the low frequencies. It has 2 input systems with volume, and in addition, it is also attractive that it can be used in mono, so it is versatile. In addition to the exterior, no side panels, and a sticky mark on the back, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2024.6.3 operation confirmed Accessories: instruction manual Main specifications: 110W+110W (8Ω), 300W (BTL 8Ω) W470 x H150 x D365 mm 13.2 kg
- description
- This is a rare insulator made by Sony. It is a well-made insulator using air, rubber, and oil. There is a feeling of use, such as marks of the device being placed on it. (FUJISAWA KOSHI) Accessories: none Main specifications: maximum load 30kg/weight 89g/piece per 4 pieces
- description
- ※There is no problem with operation, but it is currently sold because it is cheap. Sony ES series power amplifier using a G chassis. It's an easy-to-use model with an unobtrusive tone, and it makes you feel the power of the low frequencies. It has 2 input systems with volume, and in addition, it is also attractive that it can be used in mono, so it is versatile. In addition to the exterior, no side panels, and a sticky mark on the back, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2024.6.3 operation confirmed Accessories: instruction manual Main specifications: 110W+110W (8Ω), 300W (BTL 8Ω) W470 x H150 x D365 mm 13.2 kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
