Scarce! MC module for QUAD control amplifier 34. It can be easily replaced from the 34 rear terminals. It's a must-see for 34 users and only the MM module (Murakoshi Yoichi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: original box
Key Specifications: Input sensitivity 0.1 mV
Made of ultra-short horn plastic with 2 screw holes. It is said that the previous owner used it on the Altec 802. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch 75mm, throat diameter 96mm, W160 x H160 x D110 mm (actual measurement)
Maintained! Comes with a cabinet, genuine Electri AC 100V specification. The Macintosh 7000 series stereo power amplifier was announced to coincide with the advent of the CD era. The thick and gorgeous sound typical of the company is attractive. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 maintenance completed (POWER, meter SW internal adhesion reinforcement, power stage Tr check, pattern re-soldering, CR check in the drawer board, connector cleaning, meter logo lamp, C replacement in the power supply board, each SW.VO l. Cleaning, offset, bias adjustment, operation check, panel folding correction.)
Accessories: instruction manual
Main specifications: 270W+270W power guard circuit equipped with frequency characteristics 20 to 20 kHz damping factor 30 W 443 x H240 x D400 mm 37.2 kg
This is a heavy weight for FR-54. If you've been looking for one, please take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Speaker cable, 2.3 m, unprocessed terminal, 7-thread symmetrical twisted strand structure, sterling silver coated OFC conductor. The balance between purity and density is good. Try it out with a classical symphony. You can see the exterior, dullness, threads, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
*Currently sold. An interface that can process and output music signals with a full digital connection. The clear, natural sound at a low price is attractive. *Only USB is checked; iPod/iPhone are unchecked because there are no compatible devices. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: iPod connector, 30-pin dock connector, USB terminal x 1 (TypeB), audio output terminal, 2 digital (optical x 1, coaxial x 1), video output terminal, composite x 1, W215 x H40 x D181 mm, 1.1 kg
Maintained! This is a luxurious set that includes the 60Hz 401 and the SME lightweight needle pressure arm 3009S2IMP in a tasteful cabinet! Comes with a nice dust cover. The 3009S2imp maximizes the potential of the cartridge and plays it accurately with a turntable that can be enjoyed with rich analog sound (Murakoshi Yoichi)
Maintenance information: 2024.6.19 maintained (motor disassembly/check/lubrication/assembly, main bearing disassembly/lubrication/oil sealant application/assembly, AC cord deterioration replacement, relay terminal repair, speed adjustment mechanism inspection/adjustment, motor spring rubber sleeve deterioration replacement, neon lamp deterioration replacement, mount rubber washer deterioration replacement, mount rubber washer deterioration replacement, new product replacement, built into cabinet, idler cleaning, turntable mat cleaning , running test OK)
Accessories: EP adapter
Main specifications: 401:100 V/60 Hz specification idler drive compatible with 33, 45, 78 rotations 3009S2imp: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g W525 x H195 x D440 mm 15 kg
Rare units made in England are in stock. The high range that comes out quickly is an unusual dry tone for European products. You can enjoy the cohesiveness and responsiveness typical of Frunge. In addition to the exterior and repair marks on the cone paper on one side, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.19 maintenance (cap and damper removed, centering adjustment, center cap gluing, operation check)
Accessories: none
Main specifications: 30cm (12inch) cone type full range unit input 30W impedance 15/16Ω frequency characteristics 30Hz to 16kHz voice coil aperture 2.8 cm
Speaker cable with 2.4 m pair end unprocessed ultra-high purity 7nCu/6NCU hybrid multi-conductor cable achieves excellent cost performance unrivaled. All materials and configurations, such as insulators, coatings, and inclusions, are the same as 7N and 7.8N cables, and it is a product with outstanding content density. You can see the exterior, dullness, threads, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Continuity confirmed
Accessories: none
Unused item. This is a USB-DAC with headphone amplifier co-planned by Luxman and Stereo magazine in the 2013/1 appendix of Stereo magazine. With a USB connection, you can listen to music as soon as you have a computer and headphones.
Maintenance information: 2024.6.19 sound output confirmed
Accessories: original box, booklet, cable
Main specifications: input signal 16 bit 32 kHz/44.1 kHz/48 kHz headphone output 62.5 mW +62.5 mW (16 ohms) W110 x H65 x D170 mm (including protrusions) 580 g
Stereo magazine ONTOMO MOOK 2016/1 appendix USB noise filter. Noise is reduced by connecting between a computer and a USB DAC. Since it is a small base, it is very easy to use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Continuity confirmed
Accessories: original box, booklet
Main specifications: USB 2.0 compliant, 480 Mbps data transfer rate compatible, W60 ✕ D50 ✕ 26 mm, weight 4 g
D-312E/D-302E exclusive stand AS-1E (63,000 yen) included! It is a flagship model with thorough noise countermeasures down to the smallest detail. We have succeeded in reducing even the smallest level of noise, and higher definition sound quality has been obtained. It is equipped with a large magnetic circuit using a huge ferrite magnet with a diameter of 140 mm/1090 g, so you can enjoy rich sounds that are hard to imagine from its size. The exterior, paint is bald on the front of the stand, there are small tears in the saran net, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: saran net, jumper plate, spikes x 8
Main specifications: [D-312] 2-way bass reflex type rated impedance 4 Ω maximum input 200 W rated sensitivity level 83 dB rated frequency range 34 Hz to 100 kHz crossover frequency 2 kHz W236 × H353 × d346 mm weight 12.2 kg [AS-1E] W287 × H584 × D413 mm (when spikes are not attached) weight 7.2 kg
※The cantilever is slightly tilted to the right, and clearance is low. This is the GE successor to the MC cartridge masterpiece SPU. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to the conventional wild tone. The needle cover is missing, rust floats on the G-shell terminal surface, and there is rust on the cantilever (Murakoshi Yoichi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: none
Main specifications: MC type elliptical needle output voltage 0.2 mV playback frequency band 20 to 20,000 Hz load resistance 10 ohms or more impedance 3 ohms needle pressure 3.0 to 4.5 g dead weight 32 g
The disposal price has been reduced. Member prices are not applicable. 2024/6/4 sales price 498,000 yen upgraded product (green display on display). Jeff Roland's classic preamp. It's a supple, mature expression, and you can also listen to the sound of excellent quality. It is an excellent control amplifier that also has the great advantage of being easy to bring to your own favorite sound with accessories such as cables. There are stains all over the exterior, and there is a scratch on the front corner of the top plate (Kojima Yosuke)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, power cable, connection cable, conversion plug
Main Specifications: Input: XLR×5/Bypass XLR×1 Output: Main Out XLR×1/Record Out XLR×1 Preamp Part: W445 × H80 × D152.5mm 11kg Power Supply Unit: W445 × H38 × D122 mm 3 kg
Officially imported from Scantech LYRA CONNOISSEUR version 5-0L is now in stock. A flagship designed by Jonathan Carr like the previous one. Not only is the transparency and high SNR feel, but the smooth fine particle feel in the mid to high range is excellent. It has a supple and nice tone, and makes me listen to music clearly. The exterior has scratches and small scratches on the top plate. Serial.C50L4028 (Yonejima Satoshi)
Maintenance information: 2021.7.13 manufacturer maintained (attenuator disassembly and cleaning, board adjustment, wiper replacement adjustment, grease application. Selector disassembly cleaning, wiper adjustment. (Characteristics check, running check OK)
Accessories: instruction manual, power cord
Main specifications: main body W400 x H105 x D320 mm power supply unit W400 x H130 x 4D30 mm weight main body 10.5 kg power supply unit 28.5 kg