Maintained. with cabinet! A power amplifier representing the McKinn Golden Age. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. Exterior features include chips and bumps on the cabinet. Serial JCT 4858 (Murakoshi Yoichi)
Maintenance information: 2024.4.3 Maintained (electrolytic capacitors (large capacity capacitors use used products of the same type)), resistors, lamps, etc. have been replaced. Missing screws and rings added. panel paint. Solder correction. Pattern correction. Clean VR and SW connectors. Loosen the screws and tighten them. Bias and offset checks. Output audio check)
Accessories: instruction manual (copy)
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
A classic MC boost transformer. With 2 input systems, impedance can be switched to 3.40 ohms, and comes with a PASS line, you can freely enjoy various cartridges and tone arms (Takasaki Atsushi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Balance cable 1.0m pair Glen optimized copper+polymer coating features a rich three-dimensional, high-contrast expression. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
Speaker stand for YAMAHA NS-05 and NS-1 Perfect for other companies' small speakers (Takasaki Atsushi)
Accessories: none
Main Specifications: Speaker Stand External Dimensions W250 ✕ H385 ✕ D330 mm Weight 4.0 kg
RCA cable, 1.0 m pair, antistatic, transparent polymer, compression, twisted, 8N copper conductor, SVPE insulation, draws a clean and clear sound image. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box, seal
Balance cable 1.0m pair Glen optimized copper+polymer coating features a rich three-dimensional, high-contrast expression. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
RCA cable, 1.5 m pair, antistatic, transparent polymer coating, compression stranded, 8N copper conductor, SVPE insulation, draws a clean and clear sound image. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box, seal
Power cable 2.0m POWER MAX series high CP cable PCOCC-A conductor is used with a 3.5 scare copper foil shield, tourmaline sheath, carbon CSF tube, etc. and are built without compromise (Hiura Katsuji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Maintenance has been completed, including removal of internal glass fogging! The company's first model equipped with a digital panel. The sense of S/N has increased, and the sound is deep enough to be compatible with modern speakers. The high range has also been widened, and while every band remains clear, it makes you feel the thickness typical of McKinn. Detailed settings are also possible with the 8-band equalizer. (MIZUSAKI Ryo)
Maintenance Information: 2024.4.30 Maintained (glass panel fogging cleaning. 8 Tone VR ✕ pieces have been disassembled and cleaned.
Operation check OK)
Accessories: power cord, remote control, instruction manual
Main specifications: digital volume type 8-band equalizer line input 9 systems (RCA x 8/XLR x 1) phono (MM) input 1 system line output 3 systems (XLR/RCA) W445 x H150 x D470 mm 11.5 kg
This is a super dreadnought mono power amplifier. Recommended for those who want to drive large speakers! The sound quality is natural and clearly expresses delicate parts. It is a power amplifier that has driving power and allows you to feel comfortable and at ease. There are small scratches on the exterior, but it is generally good (Ryo Mizusaki)
Maintenance information: 2024.4.30 Maintained (meter acrylic removed, internal glass fog cleaning, all front lamps replaced. (Check that the lamp is on)
Accessories: power cord, instruction manual
Main specifications: 1200W (2/4/8 Ω) speaker output 1 system x 3 (2 ohm x 1, 4 ohm x 1, 8 ohm x 1) input terminal RCA x 1 system, XLR x 1 system, W445 x H313 x D540 mm 66.7 kg/unit
Output transformer sale push-pull output 15 W primary: 8 kΩ secondary: 4/8/16 Ω W97 x H80 x D86 mm approx. 1.9 kg/piece (actual measurement, not including protrusions) There is a dull item with the original box, but it seems to be an unused item due to the condition of the terminals!
Accessories: original box
Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
Maintained. This is the highest grade deck in the ES series, bearing the “7,” the final model of the Sony cassette deck. The overwhelming weight and stable operation with a strong body are suitable for a reference machine, and it is also easy to operate intuitively. The sound quality is also sharp, and it is a top level car that achieves both sound and operability. The exterior has line scratches, bumps, and threads. Serial 252215 (Tamura Eiji)
Maintenance information: 2024.4.30 maintained (mechanical drive belt replacement, capstan belt replacement, left pinch roller replacement, head base cleaning and grease up, pinch roller cleaning and grease up, mechanical shaft cleaning and grease up, capstan motor control part electrolytic capacitor replacement. Contact cleaning by detaching the tape half detection switch. Check the tape running path, adjust the left pinch roller height, and check and adjust the playhead azimuth angle. Recording level adjustment volume/BIAS level/EQ volume contact cleaning, Dolby switch contact cleaning, headphone volume replacement, print pattern status check, and additional soldering treatment. Playback level check adjustment, recording level check adjustment, bias level check adjustment, recording calibration operation check adjustment, recording playback test is good, Dolby recording and playback test is good, timer operation test is normal. *Reference value: W&F (WTD): 0.025%, blank residual noise level (-52 dB linear measurement))
Accessories: No accessories
Main specifications: 4 tracks, 2 channels, 3 heads, frequency characteristics, 15 Hz to 22 kHz, W430 x H135 x D380 mm, 12 kg
※It is cheap because it is out of stock and is a spike replacement. A speaker stand that fits the top plate perfectly with JBL's signature speakers 4312, 4425, and 4428 series. Control the sound by filling the pillars with cast iron powder. The sound is like a control monitor with a sharp focus. The exterior has strokes and bruises (Tamura Eiji)
Accessories: spikes (replacement)
Main specifications: top plate W360 x D293 mm bottom plate W440 x H334 x D370 mm (actual measurement) weight 29 kg/bottle
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Audio-Technica connectable cartridge capsule. One can be stored while the headshell is attached (Tamura Eiji)
Accessories: No accessories
Main specifications: W51×H85×D51mm
Power cable 2.0m PSE standard oxygen-free copper (OFC: oxygen-free copper) is an expressive power cable with high resolution, full of speed (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
※Because it smells like tobacco, it's cheap. 1 bottle only. Balance cable, 5.0 m, Neutrik branded cable, 3 core specification, 8412. The sound is thick and solid throughout the entire range. The exterior smells like tobacco (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
Power cable 2.0m PSE standard oxygen-free copper (OFC: oxygen-free copper) is an expressive power cable with high resolution, full of speed (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
※Because it smells like tobacco, it's cheap. 1 bottle only. Balance cable 4.0m is a standard Neutrik microphone cable. It is also characterized by its soft sound quality and ease of handling (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
*Only one speaker cable, 2.5 m, and the unprocessed conductor at the end is a PCOCC-A Acoliba single-wire cable. An air insulation structure that was only used in hundreds of thousands of high-end cables. This cable has high cost performance. There is a feeling of use such as friction on the sheath (Jun Tamai)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Jumper cable, 0.2m, set of 4, silver conductor (PSS), banana-Y lug terminal specification, there is dullness around the plug (Kojima Yosuke)
Accessories: none
ALTEC monitor speaker system. The unit configuration is similar to CARMEL. The mid-low range, which has a sense of volume like CARMEL, is slightly thin, but you can enjoy the sharp Altec sound. There is an attenuator gap, but there is no problem playing music (Daiki Goto)
Maintenance information: 2024.4.30 The exterior bottom has been repaired and painted
Accessories: none
Main specifications: 2-way 3-speaker unit configuration/802-8T, 414-16B x 2, N-800-F dimensions W788 x H610 x D488 mm weight 43 kg/book
RCA cable 1.0m pair revision B type signature series There is little dramatization in the tone, but you can enjoy a spectacular sound field feeling as if the speaker size has been larger by one size or more. There is dullness on the plug (Kojima Yosuke)
Accessories: none
Speaker cable 4.0m pair Y lug - banana 6N high-purity copper thick aluminum wrap shield. This speaker cable has an excellent balance between the warmth of the sound of 6N copper and elongation in the high range due to the silver coating. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
※This is a speaker cable with only 4.0 m untreated end, 6N high-purity copper thick aluminum wrap shield, and excellent balance between the warmth of the sound of 6N copper and elongation in the high range due to the silver coating. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
The 2.5m banana conductor at the end of the speaker cable is a PCOCC-A Acoliba single-wire cable. An air insulation structure that was only used in hundreds of thousands of high-end cables. This cable has high cost performance. There is a feeling of use such as friction on the sheath (Asae Tomoho)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
The basic structure of the 1.0 m pair of balance cables remains the same as the previous model, and Oyaide is proud to refine the precision conductor 102 SSC with patented technology 3E twisting. There are dirt and threads on the exterior (Tomonori Asae)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
The 2.1 m pair end of the speaker cable has an unprocessed twist specification, making it less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. The exterior is dirty and dull, and you can see the feeling of use such as magic writing (Tamai Jun)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
The 7.0m pair end of the speaker cable has an unprocessed twist specification, making it less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. The exterior is dirty and dull, and you can see the feeling of use such as magic writing (Tamai Jun)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Only 1.0 m 1 balance cable uses technology introduced into the 7N-A2070, and is a thick rhodium plated plug that uses a stress-free 6N copper conductor. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: No accessories
RCA cable, 1.0 m pair, hybrid conductor centered on 7N copper, the contact part is a standard model that uses rhodium plating. The cable has a sense of sound pressure in the mid-range and has characteristics suitable for jazz. There is dullness in the plating ring around the plug (Kojima Yosuke)
Accessories: none
Maintained by the manufacturer! This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. There are multiple scratches on the top plate. The LCD is slightly dark (Sasaki Shota)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test)
Accessories: remote control, copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Maintained. A Yamaha stereo power amplifier boasting high driving power with a damping factor of 200. The cool panel design and the impressive meter with an orange light are also attractive. Enjoy the hot sound unique to the heyday of audio. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.27 Maintained (pre-drive circuit repair. Soldering fixes within each circuit. Bad output relay contact replacement. (Meter lamp power lamp deterioration replacement)
Accessories: none
Main specifications: rated output 120W+120W (8Ω) size W435 x H133 x D380 mm weight 11.8 kg
*Remote control is out of stock. Maintained! It is a control amplifier that supports digital input in addition to analog input. The simple mechanical design is also good. The sound quality is also attractive, with a relaxed, highly transparent sound typical of Yamaha. There are dullness and dents (Oikawa Tetsuji)
Maintenance information: 2024.4.27 Maintained (disassemble switches such as PHONO selectors, polish contacts and apply contact cleaner. The preamp circuit, power supply circuit, and all other circuit board soldering were corrected. Digital input sound output check OK. (I/O pin jack polish)
Accessories: instruction manual
Main specifications: 8 digital inputs PHONO (MM/MC), 18-bit operation, built-in twin D/A converter, W473 x H130 x D400 mm, 12.2 kg
Fidelity-Research step-up transformer A multifunctional boost transformer that can be switched from 3 ohms to 100 ohms, has 3 inputs and PASS, and can also be used as a selector for multiple record players. Each gain is equipped with an independent toroidal transformer. The exterior is dull, and there are small scratches (Oikawa Tetsuji)
Main specifications: boost transformer core format/toroidal core input impedance 3Ω, 10Ω, 30Ω, 100Ω, PASS (switching) load impedance 47 kΩ to 57 kΩ frequency characteristics 20 Hz to 30000 Hz W170 × H60 × D180 mm 1.2 kg
This step-up transformer is ideal for SPUs, etc. It is an MC transformer with excellent thickness and sense of energy, and fully brings out the characteristics of cartridges. (Sasaki Shota)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: original box
Main specifications: input impedance 2 to 6 ohms boost ratio 28 dB load impedance 47 kΩ or more channel separation 80 dB (1 kHz) dimensions W80 x H40 x D128 mm weight 400 g
Speaker cable 5.0 m pair M.C.CS 122 HYBRID is a Vandenhall speaker cable using a parallel multiple stranded wire structure. It is a character that carefully conveys musical expression and gives depth to the expression of European speakers such as Tannoy, as well as domestic speakers. Rubbing on the sheath
There is dirt (Kojima Yosuke)
Accessories: none
A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
Luxman high definition speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Tigron's 3-disc tuning spacer suppresses complex resonance that occurs in the installation environment of audio equipment, musical instrument amplifiers, etc., and brings out the original performance of the device. There are footprints and a sense of use (Oikawa Tetsuji)
Accessories: original box
Main specifications: size, diameter: 70 mm, thickness: 3 mm, material: special heat-resistant synthetic rubber, magnesium alloy, load capacity: 30 kg/1 piece
Heavyweight marble board Perfect as a speaker base or as a base for mono power amplifiers. The surface is polished, and the sides and back are not as smooth as the front. On the exterior, you can see a small chip on the back corner (Oikawa Tetsuji)
Accessories: none
Main specifications: Size: W400 x D500 x H50 mm 24.8 kg
Pair tube, made in England, bell type smoke measurement value 78/74 (rejected value 46) with tea box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: tea box
Pair tube, made in England, bell type smoke measurement value 80/78 (rejected value 46) with tea box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)