SONY ND-220G compatible replacement needle. Since there is no main unit, it has not been checked (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SONY ND-136G compatible replacement needle Since there is no main unit, it has not been checked (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Compatible needle for ONKYO OCH-55V It is unopened and operation has not been checked (Katsuji Hiura)
Maintenance Information: Operation Unconfirmed
Accessories: original box
OTTO ST-4D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Compatible needle for ONKYO OC-57M It is unopened and operation has not been checked (Katsuji Hiura)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle for Hitachi. Compatible with MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
Replacement needle for TRIO and KENWOOD V-36 cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for TRIO KENWOOD cartridge DM-11 Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Compatible needle for ONKYO OC-36M It has not been opened, and operation has not been confirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: The needle pressure seems to be 2.0g.
Compatible needles for COLUMBIA DSN-68, Toshiba N-36C, TRIO N-65, ONKYO DN-67ST, SONY ND-148G, AIWA AN-F10 It has not been opened, and operation has not been confirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Compatible needle for ONKYO OC-39 It is unopened and operation has not been checked (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: The needle pressure seems to be 2g.
Compatible needle for VICTOR MD-1013Z Unused, operation unconfirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: I think it is 2.5 to 3.5 g.
Victor DT-37 compatible needles It is for the MD-1034. It has not been opened, and operation has not been confirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: needle pressure is likely to be 1.0 to 1.75 g
Replacement needle for TRIO KENWOOD V-53 cartridge Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needles for T-30 and V-30 TRIO KENWOOD cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
Maintained! A pre-main amplifier that inherits the sound of the D series and has achieved even lower distortion. A model where you can feel the uniqueness of Sansui at the time in the extrusion of low frequencies and sound creation. It's energetic, playable, and goes great with jazz and rock, and is compatible not only with MMs but also with MC, making it great for analog fans. There is a feeling of use such as dullness, abrasions, corrosion, dirt, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.11.21 Maintained (balance, main volume, output relay, power supply floating resistor, Mylar capacitor, equalizer section op amp replaced. Input selector and other rec outs, tone, subsonic, and muting switches are disassembled and polished grease is applied. (Each volume, switch cleaning, solder repair, interior and exterior inspection and cleaning, adjustment inspection.)
Accessories: copy of the instruction manual
Main specifications: 75W+75W (8Ω) PHONO (MM/MC) W445 x H163 x D403 mm 12.4 kg
Interconnect cable, 0.6 m pair, this is a standard cable for microphone cables without terminals. It also features soft sound quality and ease of handling (Murakoshi Yoichi)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
SWING velvet record cleaner. On the exterior, there is a feeling that the case lid is missing, faded, dull, etc. (Kobayashi Hitoshi)
Accessories: case bottom
Main specifications: W88 x H60 x D33 mm, weight 18 g (main unit only)
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
Replacement Cartridge for Multi Record Player TCE-262P Pack of 3 Operation not confirmed. If you have been looking for one, please take this opportunity (Kanai Hidetsugu)
Maintenance information: There is no compatible device and operation has not been confirmed
Accessories: needle cover, instruction manual
DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
Genuine Hitachi, genuine replacement needle for IFS-240 The cantilever is slightly turned to the left. Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
The price has been drastically reduced. 2023/11/8 sales price 49,800 yen ※The display panel moves when the volume etc. switch is pressed, but this is a specification. Maintained! MICROMEGA D/A CONVERTER It's a well-balanced European tune, and you can listen to chamber music and vocals smoothly. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintained (replacement of tantalum electrolytic capacitors, replacement of other capacitance electrolyzed capacitors. Various digital signal demodulation tests confirm normal operation. (Rubber foot replacement)
Accessories: none
Main specifications: 1-bit input sampling frequency 32kHz,44.1kHz,48kHz W220×H55×D110mm 1.5kg
Victor DTS-2 compatible Replacement needle for DTS-2 and STS-2 Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
TRIO N-39 compatible needle. This is a replacement needle for TRIO V-39. Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for Victor MD-1050Z, Z5P Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for TRIO/KENWOOD cartridge V-39MKIII Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Genuine Hitachi, genuine replacement needle for IFS-240 Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
SONY ND-200G equivalent Replacement needle for XL-20G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: original box
SONY ND-142G equivalent Replacement needle for VL-42G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: original box
SONY ND-138G equivalent Replacement needle for VL-38G It has been opened, but since there is no target cartridge, operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
SONY ND-200G equivalent Replacement needle for XL-20G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Genuine YAMAHA, genuine replacement needle for CG-8100 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box