The disposal price has been reduced! (Member discounts are not applicable) 2024/4/11 sales price 3,000 yen ※It is cheap because it is in poor condition! The self-made enclosure 2-way type 175DLH and D130 were mounted, but the hole position on the screw receiving side did not match and they were fixed by sealing. Processing is required for actual installation. The exterior has a feeling of use over time, such as dullness, scratches, peeling veneer, etc. (ASAINE Tomonori)
Accessories: saran net
Main specifications: size 450 x 845 x 450 mm weight 17.7 kg (actual measurement)
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
The speaker cable is a conductor consisting of 350 cores in all, a 2.0m pair of end rod terminals, and is very heavy (about 2 kg per piece with only the core box part!). It has a unique presence, full of a sense of craftsmanship that cannot be found with other cables. Contrary to being rugged, the sound is detailed and smooth. As you raise the volume, you can see its true value. There are scuffs, fraying, and dirt on the sheath ※Since the core box is extremely heavy, installation requires ingenuity so that no load is applied to the cable and speaker terminals. The distance from the box to the cable terminal is approximately 15 cm. Connect the terminal side with the red seal in the middle of the sheath to the amplifier, and the terminal on the core box side to the speaker (Kojima Yosuke)
Accessories: none
Main specifications: total weight 4.8 kg
Speaker cable with 2.3 m pair ends, unprocessed, 2-split band with balance & time correct construction. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
Phono cable 0.5m RCA-RCA earth missing The sound quality is thick and powerful, typical of Audiocraft. It has unmistakably neutral properties. You can see the exterior, dullness, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: Continuity confirmed
Accessories: none
Disposal prices have been reduced! (Member discounts are not applicable) 2022/10/9 sales price 2,000 yen Audio Pro speaker Bravo ALLROOM SAT bracket. This is a wall mounting accessory. The exterior is generally good (Takahashi Nobuyuki)
Accessories: instruction manual copy source box
Main specifications: 52g per weight
Disposal prices have been reduced! (Member discounts are not applicable) 2022/10/9 sales price 2,000 yen Audio Pro speaker Bravo ALLROOM SAT bracket. This is a wall mounting accessory. The exterior is generally good (Takahashi Nobuyuki)
Accessories: instruction manual original box
Main specifications: 52g per weight
The price has been drastically reduced. 2024/4/10 sales price 10,000 yen. Coaxial cable 0.9 m 75 ohm collet chuck plug From the shield notation, it seems that the cable is also made by ZAOLLA. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.8 continuity confirmed
Accessories: none
Speaker cable 1.9 m pair end banana - basic cable composed of 4 unprocessed single-wire conductors. It's a straight, extruded, and comfortable sound. There is dullness around the plug (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/25 sales price 198,000 yen manufacturer maintenance completed! Tubular premain amplifier equipped with 300B. In addition to combining a vacuum tube with a modern design, it is easy to use with easy bias adjustment. Since it can also be used as a power amplifier using the PRE-IN terminal, it is also recommended for those considering separating them in the future. Serial 05050050 (Hiroki Aso)
Maintenance information: 2024.4.25 Maintained (maintenance including restoration of the contact point of the selector polishing volume ※ vacuum tubes can still be used, but they have deteriorated appropriately over time, so please understand that this is a current product)
Accessories: instruction manual copy power cable
Main specifications: maximum output 18W+18W (8Ω) vacuum tube 300B/A grade push-pull input terminal input RCA4 system
(4 rear systems, 1 tape out system) output terminals 6/8/16 ohm, 1 system each, TRIODE original 300B power consumption 220W size 440 x depth 320 x height 200 mm weight 20 kg
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/25 sales price 19,800 yen ※There is no problem with operation, but it is cheap because there is a lot of rust. LUXMAN's thin synthesizer tuner. The design matches the Luxman Primaine from the 80s, and has a nostalgic, nostalgic atmosphere. The exterior has dullness, small scratches, and rust, and there is a feeling of use, as the power cable has been changed to an external product. Serial G2701694 (Hiroki Aso)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: FM/AM tuner FM tuner part S/N stereo 80dB selectivity NARROW (±300kHz) 80dB
WIDE (±400kHz) 65dB AM tuner part S/N50dB dimensions W453 x H87 x D344 mm weight 4.8 kg
Maintained! Single stereo power amplifier using 2A3 output tubes. You can enjoy the aftertaste of sound and air unique to vacuum tubes. It expresses vocals and string music in a sweet and glamorous manner. This is a well-built car at an affordable price. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 maintenance completed (power supply capacitor replacement, RCA jack replacement, cord clamp added to keep unused wire away from heat source, fixed solder defects, vacuum tube pin cleaning, bias check ham balance adjustment, output approx. 4.5 W (current load set to 8 Ω), interior and exterior cleaning)
Accessories: power cable
Main specifications: rated output 3.5W+3.5W vacuum tube 2A3 x 2 6H8C x 2 5U4G x 1 W360 x D210 x H190 mm 16 kg
※A standard cable with only 1 speaker cable that has become synonymous with 2.0m end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.7 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.14 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.4 meter pairs of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable is a standard cable that has become synonymous with an unprocessed speaker cable with only one 1.4 meter end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.3 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.3 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.0 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.3.30 Continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with 0.95m pair end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with an unprocessed speaker cable with an 0.8 meter pair end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable A standard cable that has become synonymous with an unprocessed speaker cable with an 0.8 meter pair end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2023/4/16 sales price 138,000 yen genuine Rin Japan product. The Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are no noticeable scratches on the exterior. Serial 1324171 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord, original box
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The price has been reduced! 2024/3/6 sales price 25,000 yen speaker cable 1.0 m pair banana on both ends uses the company's highest-grade cable material. Recommended for those who want to improve the tightness of the low frequencies. On the exterior, there is a part where the rubber ring on the terminal is off. ※The cable is stiff, so please be careful when routing (Tamura Eiji)
Maintenance information: 2024.3.6 continuity confirmed
Accessories: No accessories
The disposal price has been reduced. Member prices are not applicable. 2023/9/23 sales price 118,000 yen This is a high sound quality studio preamp with feedback on design and development technology for professional consoles and DC power amplifiers. It has a high-grade design, such as an input level equipped with a large machined aluminum knob, monitor level volume, an R core transformer, and a luxurious power supply unit using a large capacity capacitor. There are hit scratches and line scratches overall (Daiki Goto)
Maintenance information: 2023.9.23 Operation confirmed
Accessories: power cable
Main specifications: Input SOURCE INPUT 4 stereo systems (1 of which is balanced input) DECK INPUT stereo 4 systems output MONITOR OUTPUT stereo 2 systems (1 of which is balanced output 2 hot) DECK OUTPUT stereo x 4 W483 x H181 x D44 mm 3.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
The 1.5m SD-1010 stereo to mono conversion cable is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
The stereo to mono conversion cable 1.0m SD-1010 is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
The stereo to mono conversion cable 1.0m SD-1010 is used, and it seems that the stereo output is converted to mono, but the purpose of use and whether it is the manufacturer's original custom product is unknown. There is dullness around the plug, frayed on the sheath, and fading due to aging (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/3/2 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yonejima Satoshi)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: No accessories
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
The core model for Marantz SACD players. Although it is an entry model, it has a high S/N feel typical of the company's products, and the sound quality is excellent for listening for a long time. It is an attractive player with a sense of quality in the mid to high range with a fine particle feel. The exterior has a feeling of use such as dullness and small scratches. Serial 20000540002323 (Takahashi Nobuyuki)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: SACD/CD player, 1 analog output system (RCA), 2 digital output systems (coaxial x 1, optical x 1), digital filter, switch to 3 modes, W440 x H123 x D419 mm, 13.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/14 sales price 198,000 yen This model takes the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
※Since it is cheap and the video system has not been checked, it is currently sold. Yamaha AV receiver. It is based on Yamaha's sound field creation technology Cinema DSP. It is equipped with a cinema DSP (3D mode) that realistically reproduces a three-dimensional surround space. There are line scratches on the rear panel and dullness on the front (Daiki Goto)
Maintenance information: 2024.2.25 Operation confirmed (2ch playback only)
Accessories: remote control, instruction manual, power cable, original box, antenna
Main specifications: W435 x H171 x D367.5 mm Weight 11.2 kg
Speaker cable, 8.5 m pair terminal, banana - QED 40th anniversary model, cylindrical 6-core structure, has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Key Specifications: Comments in progress
※There is no problem with operation, but since it is cheap, it will be handed over as is. Denon network CD receiver. It supports playback of music files on USB memory devices and direct playback of iPod/iPhone, and can play back FLAC/WAV/AAC files. Equipped with an FM/AM radio tuner, it also supports wide FM. Serial 6051253439 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: CD player section/playback frequency characteristics 2Hz to 20kHz sampling frequency 44.1 kHz tuner/reception frequency band/ FM 76.0 MHz to 95.0 MHz, AM522kHz to 1629kHz input terminal/analog audio input x 1, optical digital input x 2 output terminal/subwoofer output x 1, headphone output x 1, other input/output terminal/USB-A (Front) x 1, FM antenna input x 1, AM Antenna input x 1 W210 x H115 x D309 mm 4.0 kg
The price has been reduced! 2024/4/5 sales price 500 yen The sound quality of only one 2.0m QED speaker cable feels thick and flexible throughout the entire range. You can use it regardless of genre. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/5 sales price 500 yen The QED speaker cable 1.0m pair sound quality feels thick and flexible throughout the entire range. You can use it regardless of genre. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/2/18 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. Serial AWY15180500756 There are scratches on the top plate on the exterior (Hiura Katsuji)
Maintenance information: 2024.2.18 Operation confirmed
Accessories: remote control power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/12 sales price 69,800 yen Maintained! A slightly unusual Crown consumer power amplifier. It is thin and rack-mountable. A lot of straight sounds are alive and well. It is also suitable as a separate introductory machine. The exterior is dark and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.3.12 Maintained (volume volume noise was confirmed, so custom-made volume left and right were replaced, (click sound will disappear due to replacement of custom-made product) Running test with other sounds)
Accessories: none
Main specifications: 50W+50W (8Ω) W480 x H40 x D320 mm 7.5 kg
※Because it smells like tobacco, it's cheap. Maintained! Custom edition of the large power amplifier PA-70 from the STASIS circuit. Supported by a huge 700W toroidal transformer, the speaker driving power, which consists of a 90A power supply, is one of the best among domestic amplifiers. Fortissimo, which excels at delicate depictions but doesn't make you feel limited, is unique to this large amplifier. The exterior is dull and scratched. Serial 11179 (Fujisawa Yukishi) A
Maintenance information: Maintained on 2024.4.26 (bias part and constant current part semi-fixed VR, output relay, and damaged screws were replaced, additional installation due to lack of cable protector, solder crack correction, bias and offset adjustments, output sound check, dirt removal and cleaning)
Accessories: No accessories
Main specifications: rated output 225W+225W (8Ω) W435 x H200 x D421 mm approx. 28.5 kg
※It is inexpensive because the condition is poor due to scratches, threads, and partial sheath deformation. Off sale power cable, 1.0 m, has an unprocessed end that combines performance and safety at an astonishing level. There are dirt and scratches on the exterior (Tamura Eiji)
Accessories: No accessories
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 118,000 yen Maintained! The thin preamp from the musical Fidelity has an English style taste where you can feel the elegance, and the perfect balance of high frequencies that don't insist too much on the thick, thick mid-low range unique to this era feels good. The tape/monitor switch has been repaired and replaced and is a non-genuine product. The exterior is dull overall, with small scratches and a lot of feeling of use (Asaine Tomoho)
Maintenance information: 2023.10.26 maintained (TAPE1 monitor switch defective → non-genuine silver knob replacement. Rear terminal screw idle rotation all replacement, operation check) 2023.10.12 maintained (main VOL noise → replacement. Treble distortion noise VOL replacement (original not available, replacement with replacement, no click on the midpoint position) IC, DC leak defect replacement, capacitor deterioration replacement, operation check.
(We will not be able to respond if the dedicated parts are defective in the future)
Accessories: none
Main specifications: external power supply system with PHNON (MM MC) CR type RIAA equalizer output 2 systems W482 x H57 x D166 cm 3.0 kg