The Soavo-1 uses the same black mirror finish as the grand piano that the company is proud of. This model has been custom-tuned for high density and high resolution. It has a clear sound typical of Yamaha and matches theater systems. There are no major noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2026.3.22 operation confirmed
Accessories: instruction manual, jumper cable
Main specifications: 3-way bass reflex unit/16cm A-PMD woofer x 2, 13cm A-PMD mid-range x 1, 3cm aluminum-magnesium dome tweeter x 1 playback frequency band 35Hz to 50kHz impedance 6Ω rated allowable input 50W maximum allowable input 200W output sound pressure level 89dB W349 x H1051 x D487 mm 29.5 kg
Ampzilla, a masterpiece by the genius James Bongiorno, has been revived to the present day. While the overwhelming driving power and intuitive sound remain the same, the freshness of the sound has been improved with the circuit design cultivated through GAS/SUMO. It is recommended not only for large speakers such as JBL, but also for those who want to add a sense of dynamism to modern high-end speakers. Small scratches and dullness can be seen. Serial A2KJ1176, A2KJ1164 (Fujisawa Yukishi)
Maintenance information: 2026.3.22 operation confirmed
Accessories: No accessories
Main specifications: 200W+200W (8Ω) input RCA/XLR switching W267 x H206 x D400 mm 23.8 kg
The disposal price has been reduced. Member prices are not applicable. 2025/12/25 The unit sold at a sales price of 1,480,000 yen has been fully maintained, from the network to the exterior such as the saran net! HPD385 is mounted in a genuine TEAC box. I am overwhelmed by the majestic sense of scale and vivid sound image played by the backroad horn, which is responsible for the lowest range, and the front short horn, which expresses the mid and low frequencies. It is a speaker with a supple and beautiful sound that cannot be obtained with modern TANNOY (Daiki Goto)
Maintenance information: 2025.12.25 Maintained (exterior repair/polishing/painting)
Front and rear baffle repair and painting. Saran net cleaning/repasting, frame repair. Unit maintenance: low frequency side edge softening treatment/magnetic circuit gap cleaning/center adjustment, fastener polishing, high frequency side magnetic circuit gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning. (Detachable unit)
Accessories: none
Main specifications: 2-way, 1 speaker, all-horn system, corner type usage unit, 15 inch (38 cm), HPD385 impedance 8 ohms, W1070 x H1530 x D660 mm, 78 kg/book
YAMAHA's Hi-Res compatible speakers have arrived. It uses the same black mirror piano finish as the grand piano that the company is proud of. Attention is drawn to the high-density, refined sound brought about by the custom-tuned 3-way, 4-speaker configuration. Some saran net magnets are missing, the rear is chipped, and the paint is peeling off part of the stand (Daiki Goto)
Maintenance information: 2026.3.21 operation confirmed
Accessories: jumper cable
Main specifications: 3-way bass reflex unit/16cm A-PMD woofer x 2, 13cm A-PMD mid-range x 1, 3cm aluminum-magnesium dome tweeter x 1 playback frequency band 35Hz to 50kHz impedance 6Ω rated allowable input 50W maximum allowable input 200W output sound pressure level 89dB W349 x H1051 x D487 mm 29.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2026/3/1 sales price 10,000 yen The original speaker stand was for the YAMAHA NS-100. A stand made of a combination of particle board and iron plate. Perfect as a stand for small speakers! There are exterior, dullness, abrasions, etc. (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Top plate: W190 x D175 mm Overall: W270 x H434 x D350 mm
Beautiful item with original box! Accuphase's current pure A class premain amplifier. The pre-section is equipped with a balanced AAVA volume, and all signal flows from the input terminal to the output terminal are perfectly balanced, enabling high-purity transmission. The power section uses the latest instrumentation amplifier system, MCS+ circuit, and the familiar current feedback amplifier circuit. The bottom impedance and 1000 damping factor guarantee enable ideal driving for any speaker. Serial D4Y008 (Yamato Yuki)
Maintenance information: 2025.12.5 operation confirmed
Accessories: original box instruction manual remote control power cable
Main specifications: rated continuous average output 35W (8Ω), 70W (4Ω), 140W (2Ω), 160W (1Ω) total harmonic distortion ratio 0.05% 2-4Ω load, 0.03% 8-16Ω load damping factor 1000 (8Ω 50Hz) W465 × H191 × D428 mm 24.9 kg
The shell uses the specially processed aluminum material “Technihard,” which was born from NASA technology. It is characterized by its hardness and high rigidity, and its high speed and tight sound is attractive (Oikawa Tetsuji)
Accessories: none
Main specifications: Techni Hard Micro Vickers hardness 400 or more, dead weight 18 g
In addition to playing CDs and super audio CDs, it is equipped with Advanced AL32 Processing Plus, which is compatible with playback of various music files, including high-resolution sound sources. The disc drive part uses the same mechanism as the higher-level model DCD-SX11. It is a player with smooth and delicate depictions, thick sound images typical of Denon, and a clear and clear sense of SN. There is a line scratch on the top plate on the exterior. Serial AGS15191004146 (Tomoho Asaine)
Maintenance information: 2026.3.9 sound output confirmed
Accessories: remote control instruction manual power cord
Main specifications: SACD player analog audio output terminal unbalanced output x 1 digital audio output terminal coaxial digital output x 1, optical digital output x 1 other IR control input/output x 1 W434 x H138 x D335 mm 13.7 kg
Comes with original box! A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer. The body is dull, and there is discoloration on the cantilever (Sasaki Shota)
Maintenance information: 2026.3.2 sound output operation confirmed
Accessories: original box, needle cover
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
※Since the needle tip has been replaced, it is inexpensive. DL-103 limited model “Class 1” LC-OFC wire, which boasts the highest grade of copper, is used for the power generation coil, and the body is made of a special ceramic fiber-reinforced resin with high rigidity, enhancing the purity of traditional monitor sounds. It has an even greater sense of range, and playback with excellent separation at high speed is possible. Serial 2059 (Murakoshi Yoichi)
Maintenance information: Sound output confirmed
Accessories: needle cover
Main specifications: MC type 0.25 mV needle pressure 2.2 to 2.8 g Class 1 LC-OFC adopted
It was maintained in November 2021, and a new dust cover was created. With shell+SHURE M44G, you can enjoy analog as it is! Although it is an S-shaped arm only, 4 weights are included, and even a transport lock screw is included. Denon semi-auto player. Equipped with an auto lift up and stop function, it looks elegant, and the arm can be operated up and down with the touch of a button, making it recommended for both those who are thinking about starting a record and those who want to use various cartridges with 4 different weights. There are thin abrasions, etc., but it is a beautiful category even when viewed from the model year (Oikawa Tetsuji)
Maintenance information: 2026.2.4 New dust cover created, operation confirmed
2021.11.28 Maintained (arm area disassembly inspection/cleaning/bearing replacement. (Other motor part disassembly/cleaning/inspection/lubrication, replacing the electrolytic capacitor on the board, operating part tact SW, etc., repolishing the contact points of the arm operation adjustment volume, etc., check the rotation speed, check the overall operation, and perform sound output tests to confirm that there were no problems)
Accessories: head shell, M44G, 4 weights, transport lock screws, copy of instruction manual
Main specifications: Direct drive 33/45 rotation compatible tone arm part (static balance, electronic control) arm pipe interchangeable type W485 x H185 x D410 mm approx. 11.5 kg
Maintenance completed in 2024/2. Scratched discs will skip sound, but performance will be limited due to age. A mid-tier ES series player at the time. It is a CD player with clear sound quality with well-defined outlines typical of Sony. The sound is natural and calm with a sense of stability, so you can enjoy highly flexible sound quality that can be incorporated into various systems. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Maintained (The belt for opening and closing the tray was replaced after mechanical disassembly due to deformation and deterioration. We cleaned servo mechanisms that were stuck with deteriorated grease and oil, refilled oil, cleaned optical lenses, etc. (Output VR organic solvent cleaning and olefin oil coating treatment were performed)
Accessories: copy of instruction manual
Main specifications: CD player equipped with a high-density linear converter system, frequency characteristics 2 Hz to 20 kHz, W470 x H125 x D375 mm, 12.5 kg
* A self-made board is attached to the bottom, and there are liquid leakage marks inside the remote control, so it is currently sold at a low price. Comes with a remote control. A model that condenses the know-how of Yamaha, a prestigious audio company. The tight low range firmly supports the system. The exterior has a feeling of use such as deterioration of the top plate, line damage, and dullness (Mizusaki Ryo)
Maintenance information: 2026.1.27 Operation confirmed
Accessories: remote control
Main specifications: built-in 25cm anti-magnetic superwoofer amplifier (output 120W) playback frequency band 20 to 160 Hz YST system, equipped with 2 systems of pin terminals and speaker terminals, W330 x H475 x D380 mm (including bottom plate), 22 kg
*Currently sold. A digital multiprocessor with 3 inputs and 4 outputs for various configurations. It is equipped with a digital equalizer, a howling suppressor that suppresses uncomfortable howling, and a delay function that adjusts the direction of sound. Sound can be adjusted with just one unit. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2025.9.20 Operation confirmed
Accessories: power cable
Main specifications: W480 x H44 x D280 mm (not including protrusions on the back) approx. 4 kg
※Shipping service. Special Issue 66 = Exploring the appeal of '83 “NEW” speakers through 2 audition tests/thorough research on the Micro 1500 Series/Visit to the Tannoy Club. Issued on S58.4.15. Since the photograph is a sample, the actual item may be broken or have markings etc.