The disposal price has been reduced! (Member prices are not applicable) 2026/4/9 sales price 178,000 yen Maintained! It's a compact player that creates a sufficient analog life. It's sharp, and it's a dish where you can fully immerse yourself in music, from old jazz and rock to classical music. As for the exterior, there is a thread on the dust cover. Serial 11378 (Tamura Eiji)
Maintenance information: 2026.4.9 maintained (lifter partial dismantling, lever up, stop groove polishing adjustment. Motor and spindle shaft lubrication. Pulley disassembly cleaning clutch cleaning. Condenser, board check)
Accessories: AC adapter
Main specifications: belt drive system, rotation speed: 33 1/3, 45 rpm zinc alloy platter W440 x H170 x D350 mm 11 kg arm part: static balance type total length 265 mm overhang 15 mm needle pressure (when 1 rider weight is attached) 1 memory 0.25 g steps/0 g to maximum 2.5 g cartridge dead weight up to 28 g
Maintenance has been completed with attention to details such as main volume, relay replacement, etc. Upgraded model from AU-D607. The sharp punch is strong, and the sound with a sense of dynamism is superior to the α series. You can enjoy sharp and powerful sound. I recommend this car for people who like analog jazz, blues, etc. Serial 435108173 (Hiura Katsuji)
Maintenance information: 2026.4.16 Maintained (main volume replacement, switch disassembly and polishing (input selector, phono selector, tone, subsonic, loudness, muting, reck-out), output relay replacement, selector lamp replacement, protector transistor replacement, main amplifier volume adjustment, phono circuit and other solder repairs, earth line wiring correction, interior and exterior inspection and cleaning, pin jack polishing, adjustment inspection)
Accessories: none
Main specifications: effective output 90W+90W (8Ω) damping factor 80 (6Ω) W466 × H161 × D431 mm 15.0 kg
Every corner has been maintained, such as replacing 2 output relays, replacing 4 transistors, disassembling and polishing switches, etc. Upgraded model from AU-D607. The sharp punch is strong, and the sound with a sense of dynamism is superior to the α series. You can enjoy sharp and powerful sound. I recommend this car for people who like analog jazz, blues, etc. The exterior is in a state where there is a feeling of use such as dullness over time. Serial 614118150 (Yamato Yuki)
Maintenance Information: 2026.4.18 Maintained (① Main Volume Replacement ② Output Relay Replacement ③ Switch Disassembly and Polishing (Input Selector, Phono Selector, Recout, Tone, Subsonic, Muting, Loudness) ④ Input Terminal Replacement ⑤ Speaker Terminal Installation ⑥ Selector Lamp Replacement ⑦ Main Amplifier Capacitor Replacement ⑧ Tone, Balance Volume Sound Wave Cleaning ⑨ Protector Transistor Replacement ⑩ Solder Repair, Inside Exterior inspection cleaning, adjustment inspection
)
Accessories: copy of instruction manual
Main specifications: effective output 90W+90W (8Ω) damping factor 80 (6Ω) W466 × H161 × D431 mm 15.0 kg
An introductory model for Marantz CD players. Equipped with a 32-bit stereo D/A converter. With the digital filter switching function, you can switch between filter 1 (slow roll off) and filter 2 (sharp roll off) according to the music to be played and your preferences. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2026.4.18 Operation confirmed
Accessories: remote control, manual, original box, power cable
Main specifications: audio output terminal/analog unbalance x 1, coaxial digital x 1, headphone x 1, other input/output terminals, USB (front) x 1, Marantz remote bus (RC-5) input/output x 1, W440 x H105 x D341 mm 6.5 kg
Maintenance has been completed with 26 capacitors, 8 lamps replaced, disassembled all switches, polished, etc. A famous and famous first generation preamp. The coat is different from today's tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The sharp sound image and exhilarating sound are different from the current model's appeal. There are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance Information: 2026.3.23 Maintained (Electrolytic Capacitors, Tantalum Capacitors, Lamps, Power Switch Replacement. Volume cleaning, selector type disassembly cleaning and cleaning. Phono input changes were partially corrected. Cleaning panels, knobs, housings, and terminals. Other part inspection, aging test*The phono part has been remodeled, so it has been restored to its original state)
Accessories: power cable, copy of instruction manual
Main specifications: 3 phono systems (equipped with head amplifiers), 3 line systems, 3 tape systems, W445 x H160 x D373 mm, 13.4 kg
The price has been drastically reduced. 2026/4/3 sales price 448,000 yen Manufacturer maintained! It is a model that faithfully reproduces the famous Model 7 that Marantz is proud of at the company's North Carolina plant. The glossy mid-high range, thick mid-range, and sharpness typical of the same model have been faithfully inherited. Inconspicuous (Daiki Goto)
Maintenance information: 2026.4.3 Marantz metropolitan area service maintained (lamp replacement. Each lever switch fixes poor contact. In addition, since part of the power supply unit composite block capacitor ran out of capacity, the capacitor was externally attached. On the rear, the RCA input/output terminal chassis floats on the ground, and all terminal ground wiring connections have been corrected. Each vacuum tube pin, clean.)
Accessories: power cable, copy of instruction manual
Main specifications: used ECC83/12AX7 6 vacuum tubes W391 x H155 x D261 mm 5 kg
The disposal price has been reduced! (Member prices are not applicable) 2026/4/2 sales price 158,000 yen ※TW is cheap due to dents and poor exterior condition. 3-way speaker system using polymer cement baffles. A Kevlar cone is used for the 20cm cone-shaped woofer. The form that was popular in the 90s is reminiscent of the same American brand Teal. The sharp three-dimensional sound unique to this shape is attractive. The exterior has mold, broken saran nets, and repair marks. Serial C35R9607/21365 (Yonejima Satoshi)
Maintenance information: 2026.4.2 sweep test good
Accessories: saran net
Main specifications: 3-way 3-speaker sealed floor type frequency characteristics 32 Hz to 26 kHz output sound pressure level 86 dB W280 x H1,020 x D430 mm weight 82 kg
MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. It is a commemorative model for Nippon Columbia's 75th anniversary. It has a wide range similar to the current DL-103R, and its crisp sharpness is attractive. Serial 5774 (Murakoshi Yoichi)
Maintenance information: 2026.4.17 sound output confirmed
Accessories: needle cover
Main specifications: MC type 20 to 45,000 Hz output 0.25 mV suitable needle pressure 2.2 to 2.8 g impedance 13 ohms dead weight 8.5 g
The price has been reduced. 2026/4/9 sales price 45,000 yen ※The needle cover is missing, and the cantilever is slightly to the right. An improved model with a high output of the MC20 up to 0.5 mV. It is an aggressive sound with a sense of dynamism and sharp sharpness. The response is good and the sharpness is perfect, so it's perfect not only for jazz, but also for rock, etc. Serial 434749 (Murakoshi Yoichi)
Maintenance information: 2026.4.5 sound output confirmed
Accessories: none
Main specifications: MC type oval needle output voltage 0.5 mV frequency band 20 Hz to 30 kHz impedance 5 ohms needle pressure 1.8 to 2.2 g dead weight 10.7 g
The price has been drastically reduced. 2025/12/22 sales price 39,800 yen Altec standard 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
※The power cable is being arranged. Maintenance has been completed, such as disassembling and cleaning switches! The first Accuphase premain amplifier. The exciting, sharp sound is compatible with JBL speakers of the same year, and makes jazz and rock sounds pleasant. It has a strong push and a thick, sharp sound, and goes great with the JBL medium size. As for the exterior, there are some threads on the top plate. Serial D7P814 (Tamura Eiji)
Maintenance information: 2026.4.16 Maintained (balance volume electrolytic capacitor film capacitor small signal transistor lamp due to failure and deterioration of each replacement switch, disassembly, cleaning, protective agent coating, solder correction, mold removal card, edge contact cleaning, output relay polishing cleaning. (Bias and offset adjustments were audio-checked for each input and output)
Accessories: instruction manual
Main specifications: 100W+100W (8Ω) premain separable W455 x H152 x D355 mm 19.5 kg
This is a system in which FOSTEX's M800 unit is mounted in a quality audio studio enclosure. The construction is also solid, and I like the wood grain design. You can enjoy sharp sound. There are no noticeable scratches on the exterior. (TAMURA Eiji)
Maintenance information: 2026.4.16 sweep check OK
Accessories: instruction manual
Main specifications: 8 cm full range unit impedance 8 ohms minimum resonance frequency 105 Hz sound pressure level 82.5 dB content: 7 liters W184 x H306 x D230 mm weight approx. 3.0 kg/book
Comes with original box! T4P standard cartridge for jacket-sized record players such as the Technics SP-10. It is a sharp cartridge with high digestibility for the price. The degree is good. (TAKASAKI Atsushi)
Maintenance information: 2026.4.15 sound output confirmed
Accessories: original box, instruction manual
Main specifications: VM type needle pressure 1.0 to 1.5 g dead weight 6.0 g
Marantz service maintained! Marantz pre-main made as an amplifier compatible with super audio. The sound, which makes you feel more relaxed and warm than recent models from the company, which have sharp looks, is attractive. The phono is also MM/MC compatible, so there are no omissions. There is overall dullness and small scratches (Oikawa Tetsuji)
Maintenance information: 2026.4.15 manufacturer maintained (power supply SW replacement. Speaker relay replacement. Mechanical push SW disassembly cleaning. Each volume contact cleaning. Soldering fixes for each board. DC offset, idling adjustment (Inspection of each part, operation test)
Accessories: remote control, instruction manual, power cable
Main specifications: 100W+100W (8Ω) playback frequency band, 5 Hz to 100 kHz, 7 analog input systems, 2 analog output systems, W458 x H166 x D464 mm, 23.0 kg
*Currently sold. This compact speaker was sold by Denon as a matching model for the RCD-M41. The cabinet uses 15mm thick MDF to suppress box noise, which causes the playback sound to become cloudy, and achieves clear sound, making it possible to reproduce bass that achieves both a rich sense of volume and good sharpness. There is dirt and stickiness on the top plate (Oikawa Tetsuji)
Maintenance information: 2026.4.15 Operation confirmed
Accessories: none
Main specifications: 2 way 2 speaker rear bass reflex type playback frequency band 45 Hz to 40 kHz impedance 6 Ω maximum allowable input 60 W sound pressure level 83 dB W 145 x H238 x 234 mm 3.6 kg
Maintained! Battery-powered MC head amplifier. The modular type allows you to enjoy analog playback like the company's ML series. It has the sharpness and dynamic sound unique to being battery-powered, and the combination with the old SPU is particularly exquisite. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.2.21 maintenance completed (battery holder replacement, electrolytic capacitor and pin jack replacement, specification inspection, operation inspection)
Accessories: none
Main specifications: 8 mV (maximum), output terminal with battery checker, 250 mV (maximum), frequency band 20 to 50,000 Hz, W220xH45xD100mm, 0.7 kg
The price has been drastically reduced. 2026/2/14 sales price 198,000 yen Lamp, rubber bushing replacement, various volumes, switch dismantling, cleaning, etc. have been maintained. Genuine Electri, short panel type The Macintosh sound of yesteryear has receded, and it is characterized by a smooth mid-high range. It is compatible with power amplifiers from other manufacturers, and you can enjoy the heavy thickness and sharp sound. There is peeling on the front panel (Oikawa Tetsuji)
Maintenance information: 2026.2.14 maintained (each SW, VOL cleaning, input selector SW dismantling correction, RCA pin jack cleaning, switched pin jack poor contact cleaning, lamp replacement, panel peeling correction, overall peeling cannot be corrected, operation check, backup transformer, relay pattern correction, re-soldering)
Accessories: copy of instruction manual
Main specifications: input terminals PHONO (MM), CD1, 2, TUNER, AUX, TAPE-1, 2, 3, VIDEO, output terminal 2 system dimensions W410 x H138 x D330 mm weight 8.2 kg
The price has been reduced. 2026/4/11 sales price 49,800 yen woofer edge softening treatment! A mid-range model with Diatone. It is a speaker that is compatible with all genres, with a sharp sound with clear outlines. There are no noticeable scratches (Daiki Goto)
Maintenance Information: 2026.4.11 Maintained (Woofer edge softening treatment completed.)
Accessories: none
Main specifications: 3-way, 3-speaker sealed system, anti-magnetic playback frequency band, 35Hz to 32kHz, 6Ω, sound pressure level, 91 dB, maximum input, 200W, W359 x H691 x D352 mm, 25.6 kg
The price has been reduced! 2026/3/1 sales price 39,800 yen Altec standard 1 inch 4 sectional horn. It comes with a stay, so it's easy to stand on your own feet. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior is dull and scratched. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
Rotel preamp with built-in USB DAC The transparent, sharp sound is attractive. Compatible with PCM384 kHz and DSD128 via USB connection. Of course, there are plenty of PHONO and analog terminals, so it's very easy to use. This one is recommended for those who want to experience a separate amplifier. There is a thin scuff (Sasaki Shota)
Maintenance information: 2026.4.12 Operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: PHONO1 system, LINE 4 system, USB DAC (compatible up to PCM384 kHz, DSD128) 2 coaxial digital systems, 2 optical digital systems W431 x H104 x D338 mm 8.0 kg
Full maintenance, from replacing deteriorated capacitors to disassembling and cleaning each selector switch! The C-2 is a masterpiece! It has a particularly good reputation for phono, and it is still a popular model among analog users. With a natural and highly transparent Yamaha sound, you can fully enjoy the appeal of acoustic instruments, such as the touch and feel of a piano, and the sharpness of guitar strings. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.10 Maintained (rear panel replaced. Main and balance volume disassembly cleaning. Internal ground wire, wiring correction. Power switch replacement. Replace tantalum capacitors, disassemble and clean each selector switch. RCA terminal distribution line correction. Cleaning panels, knobs, housings, and terminals. readjustment, aging test)
Accessories: copy of instruction manual
Main specifications: PHONO x 3 system (MM/ MC) MC head amplifier built-in W435 x H72 x D320 mm 7.9 kg
Stylish cartridge with white and yellow coloring. It's a nice, sharp sound. The exterior is in a state where there is a feeling of use such as oxidation and dullness over time (Yamato Yuki)
Maintenance information: 2026.4.11 sound output confirmed
Accessories: none
Main specifications: VM type needle pressure 1-2 g dead weight 17 g
Maintained! Yamaha's masterpiece preamp. It has a particularly good reputation for phono, and it is still a popular model among analog users. With a natural and highly transparent Yamaha sound, you can fully enjoy the appeal of acoustic instruments, such as the touch and feel of a piano, and the sharpness of guitar strings. The exterior has small scratches and dullness over time. Serial 13915 (Yonejima Satoshi)
Maintenance information: 2026.2.21 maintained (power supply SW, spark killer replacement) 2024.11.1 maintained (tone control circuit capacitor solder correction) 2024.9.20 maintained (MODE, INPUT, TAPE rotary switch disassembly and cleaning. VR disassembly and cleaning of VOLUME, BASS, and TREBLE (partial correction). SUBSONIC, MUTING switch disassembly and cleaning. Preventive replacement of 16 electrolytic capacitors. Solder correction of the RCA terminal board with PHONO input, terminal cleaning frequency characteristics, and distortion ratio confirmation)
Accessories: No accessories
Main specifications: PHONO x 3 system (MM/ MC) MC head amplifier built-in W435 x H72 x D320 mm 7.9 kg
※The needle tip is an external product. This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. It is a high-performance cartridge that has extremely high tracing ability and conveys the feeling that it picks up the sound engraved in the sound groove without omission (Murakoshi Yoichi)
Maintenance information: 2026.4.5 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
The disposal price has been reduced! (Member prices are not applicable) 2025/12/16 sales price 1,180,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled! Officially imported by TEAC. Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid to low range. Serial 001568/001574 (Yonejima Satoshi)
Maintenance information: 2025.12.16 Maintained (unit maintenance: low range side edge softening treatment/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning center adjustment. Network maintenance: frequency characteristics check, ATT cleaning, faston terminal replacement, terminal cleaning. Exterior cleaning/simple repairs. Saran net cleaning/repasting, frame repair)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
Maintenance has been completed, including wood cabinet repair and painting! An impressive 80's Lax preamp with a unique vintage design. The taste is slightly different from other Luxe Pri, and you can enjoy sharp and clear sound. There are conspicuous scratches and stains on the exterior and wood case top plate, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2026.2.25 maintained (remote wire switch, push switch disassembly contact polishing power supply circuit capacitor replacement power supply voltage adjustment volume, MC circuit DC adjustment volume replacement input/output pin jack polish power lamp replacement)
Accessories: copy of instruction manual
Main specifications: 2 line inputs, 2 phono inputs (MC, MM/MC), 2 tape systems, 2 pre-out systems, W448 x H163 x D384 mm, 9 kg
The disposal price has been reduced. Member prices are not applicable. 2025/11/8 sales price 1,180,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled! Officially imported by TEAC. Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid to low range (Oikawa Tetsuji)
Maintenance information: 2025.11.8 Maintained (exterior repair/polishing/painting. Front and rear baffle repair and painting. Saran net cleaning/repasting, frame repair. Unit maintenance: low pass side edge softening treatment/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, one-sided defective resistor replacement, terminal cleaning unit detachment)
Accessories: none
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
Maintenance has been completed, such as replacing 43 capacitors, replacing power switches, disassembling and cleaning the various switches and volumes. It has a particularly good reputation for phono, and it is still a popular model among analog users. With a natural and highly transparent Yamaha sound, you can fully enjoy the appeal of acoustic instruments, such as the touch and feel of a piano, and the sharpness of guitar strings. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2026.4.6 Maintained (electrolysis, tantalum capacitor, power switch replacement. Volume, balance volume cleaning. Disassemble and clean each selector. Panel, housing, and terminal cleaning. (Readjustment of each part, aging test)
Accessories: copy of instruction manual
Main specifications: PHONO x 3 system (MM/ MC) MC head amplifier built-in W435 x H72 x D320 mm 7.9 kg
All switches have been disassembled and the contacts have been polished and maintained! A famous and famous first generation preamp. The coat is different from today's tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating noises become a habit (Mizusaki Ryo)
Maintenance information: 2026.3.25 Maintained (in the output amplifier, resistor replaced. Transistors are replaced in the power supply circuit. Electrolysis, tantalum capacitor, lamp, and power switch replacement. Main and balance volume cleaning, disassembly cleaning and cleaning of each switch. Panel, housing, and terminal cleaning. (Inspection of each part, aging test)
Accessories: power cable, copy of instruction manual
Main specifications: 3 phono systems (with head amplifier), 3 line systems, 3 tape systems, W445 x H160 x D373 mm, 13.4 kg
Maintenance has been completed, including the replacement of the balance volume, push switch, electrolytic capacitor, and relay. A best-selling control amplifier using C-280 circuit technology based on the C-200X. You can enjoy tight low frequencies, sharp mid to high frequencies, and sharp sound. The sound image is tighter than the current Accuphase, and it also features a straighter sound. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.3.27 maintenance completed (balance volume push switch, electrolytic capacitor relay, each replacement switch contact, missing part, magnet catch correction, main volume rotary switch disassembly, polishing, protective agent coating, solder correction, RCA jack polishing cleaning, voice check for each input and output)
Accessories: copy of instruction manual
Main specifications: PHONO input x 3 systems (MC, MM compatible) TAPE x 3 systems PRE OUT x 2 systems W445 x H160 x D373 mm 13.6 kg