A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)
Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
The price has been drastically reduced! 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8000 Hz maximum input 40 W 8 Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
※1 bottle only. By adopting a diaphragm with a weight of 0.03 g or less and a magnetic circuit with a strong magnet that makes use of the characteristics of the 1000m tweeter berylum material, we have achieved smooth frequency characteristics and excellent start-up even at the high end. The sharp, realistic sound quality is a fresh and transparent sound. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: size W115 x H45 x D115 mm 0.9 kg (actual measurement)
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
Pair tube, metal, brown base, made in America, measured value 66/64 (rejected value 44) with original box (some written), sticker is attached to the base part, and there is a getter burn ※ The pair was determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Sold 1 bottle, 6SL7 high-reliability tube, made in America, red brown base, black plate, measured value 58 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
※ The stylus is a genuine SHURE VN35HE. The lock on the needle cover doesn't work, so it's cheap. Good needle tip! It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
OTTO ST-4D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
OTTO ST-7D stylus For MG8, MGT-2, and MGT42K It seems unused, but it's junk because the needle hasn't come out of the body due to deterioration of the damper. Please use it as a parts remover. There is dullness on the exterior ※ member prices are not applicable and there is no guarantee for junk items, and they are sold as is (Kobayashi Hitoshi)
Maintenance information: Operation unconfirmed (the cantilever has sunk due to damper deterioration. (As for junk items, they will be handed over as is.)
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SANYO/OTTO ST-7D stylus It appears to be unused. Operation has not been confirmed since there is no main unit (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced. 2024/5/3 sales price 29,800 yen A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: Playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
A pioneer hard dome tweeter that uses a beryllium diaphragm as the diaphragm. It achieves flat characteristics and excellent transient characteristics up to 55 kHz, which greatly exceeds the audible band. The exterior has small scratches and dullness. (FUJISAWA KOSHI)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: No accessories
Main specifications: impedance 8 ohms frequency band 2.5 kHz to 55 kHz maximum input 40 W rated input 20 W output sound pressure level 91 dB body diameter 70 x 82 mm weight 1 kg (cover included)
The price has been reduced. 2024/2/2 sales price 2,500 yen. ※Inexpensive because 1 bottle is out of stock. Orthophone speaker terminal joint cable Be sure to improve the sound quality of speakers compatible with bi-wiring with 7N ultra-high purity copper wire. One vinyl cover is short (Takasaki Atsushi)
Accessories: original box
Main specifications: 7N copper (diameter 1mm) +gold plating treatment approx. 150mm/book
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
NAGAOKA stylus cleaner. This is a standard cartridge cleaner product and an easy to use and convenient item. It's a volatile and safe cleaner. About 80% of the remaining amount is left (Yamato Yuki)
Inexpensive because there are many line scratches. The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Murakoshi Yoichi)
Maintenance information: 2024.5.8 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, self-weight 10.6 g
Maintained by the manufacturer! Marantz Primaine has an attractive thin and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers also go well together, so you can choose any music genre. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.16 Checked by the manufacturer
2023.12.3 Maintained by the manufacturer (Source Direct has gaps. No parts are available. Contact cleaning. Power switch movement correction (because it is not available). (Other operation checks)
Accessories: remote control, instruction manual, power cable
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
The price has been drastically reduced. 2024/5/10 sales price 468,000 yen Maintained! By installing a double 10-inch (25cm) diameter woofer while equipped with a traditional JBL horn and compression driver, a slim tall boy style is achieved with sufficient low frequency energy. It is an excellent speaker that combines low frequencies with instantaneous power typical of JBL and sharp mid-high frequencies. The exterior is good with no noticeable scratches (Shota Sasaki)
Maintenance information: 2024.5.10 Maintained (magnetic fluid removal/cleaning/center adjustment in the single-sided driver magnetic circuit gap)
Accessories: none
Main specifications: 3-way 4-speaker woofer 100FE-12 scoker 175Nd-3 tweeter 139 Nd playback frequency band 33 Hz to 40 kHz crossover frequency 850 Hz/12 kHz impedance 6 Ω output sound pressure level 92 dB allowable input 250W (RMS) W370 x H1,007 x D368 mm 39 kg
The price has been drastically reduced. 2021/9/21 sales price 99,800 yen with casters. This is Hayami's horizontal 5-tier audio rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with KP-4CT casters (set of 2)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/23 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been reduced! 2024/5/8 sales price 45,000 yen ※Pedestal is out of stock. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator test is good
Accessories: instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
※1 bottle only. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator check is good
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
The price has been drastically reduced. 2013/7/23 sales price 298,000 yen Edison disc phonograph. It's a name given by Edison, who created the gramophone, and there seems to be an anecdote where he was amazed and jumped up when he first heard the sound from a cylindrical gramophone he made himself. You can't enjoy the indescribable atmospheric sound anywhere else. A horn that is one size larger than the H19 is used. The exterior also has cracks, peeling, and cracks on the veneer due to aging. Also, rust is conspicuous on the wheels underfoot (Oikawa Tetsuji)
Maintenance Information: 2013.7.23 Maintained
Accessories: handle, snail
Main specifications: horn opening W392 x H260 mm main body W484 x H1140 x D500 mm
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
The price has been drastically reduced. 2024/5/15 sales price 398,000 yen Maintained! Kelly's SACD player. The high-class exterior is impressive with its sturdy aluminum housing and large spike equipment. The sound it creates is also bright and precise. In particular, when the CD software is upconverted to 96 kHz or 192 kHz, you can enjoy precise sound with a unique lightness. There are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (The servo mechanism Assy has been replaced. The uneven parts of the top plate have been corrected as much as possible. Remove the CD mechanism from the chassis, repair the tray drive part, remove grease from each part due to dust adhesion, and reapply Gushi-Moto. The damaged tray suppression mechanism has been repaired.
The cable has been fixed because the wiring styling is sandwiched between the shield case.)
Accessories: instruction manual, power cable, remote control
Key Specifications: SACD Player D/A Converter: Barbrown 1782u, 8 pieces parallel operation. Digital filter: using Pacific MicroSonic PMD200 W457xH127xD380mm 22.7kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/2/5 sales price 2,000 yen ※1 bottle only. The speaker stand compatible with BOSE's various surround speakers is compatible with the 3,2,1 series, AMS-series, AM series, FreeStyle, and LS series. The exterior is dull and has a feeling of use. (ASAINE Tomonori)
Accessories: none
Main specifications: W177 x H968 x D254 mm 3.1 kg
The stylus is good, but since the cantilever is curved, it is inexpensive. A mono-only cartridge with a traditional 33 series body. Play mono records clearly with a pick-up that is only horizontally oriented. It has vertical compliance and is optimized for recurrent mono editions in the stereoca era. The range is wider than Denon's DL-102 and you can feel the expansion (Fujisawa Yukishi)
Maintenance information: 2023.8.29 Operation confirmed
Accessories: needle cover
Main specifications: MC type needle pressure 2.3 to 2.7 g (2.5 g standard) Muku round needle high hardness duralumin cantilever PCOCC coil anti-vibration rubber “honeynight” impedance 10 ohms 6.9 g
※Shipping service. No. 138 Special Feature = Audio Style 2001/Audition of 13 Phono Equalizer Amplifiers/Exciting Report: Model 4704 PiTracer, SA14/2001.4.15 issued. Since the photograph is a sample, the actual item may be broken or there may be markings etc.