All internal deteriorated capacitors and parts have been replaced! Furthermore, a new dust cover has also been created so you can use it comfortably. A masterpiece model of a semi-auto player. The torque and braking power of the motor are excellent, and the stability of operation is impressive. The sound quality, which is delicate and has an excellent sense of resolution, brings out the performance of the cartridge well. There are thin threads on the exterior. Serial 10700499 (Yonejima Satoshi)
Maintenance information: 2024.2.29 Maintained (new dust cover created, motor part removed, shaft and bearing cleaned and lubricated. The tact SW on the operation part and the electrolytic capacitor on the internal board were replaced with a new one. Resolder the board. Remove the area around the arm, clean each part after disassembly, replace the shaft bearing, inspect the internal lead wire, and reassemble. Dust cover hinge reinforcement bracket created. Exterior cleaning, cabinet scratch polishing, rotation speed check, operation test of each part, sound test)
Accessories: instruction manual, screws, EP adapter
Main Specifications: Quartz Lock DD Drive Auto Lift Up Static Balance Type Compatible Cartridge Weight 2 to 12 g Needle Pressure Range 0 to 3 g W490 x H182 x D410 mm 14.5 kg
The price has been drastically reduced! 2024/5/10 sales price 138,000 yen Maintained by Luxman Service in 2022! LUXMAN pure A class power amplifier. A familiar luxe stone that combines a unique sense of temperature and smoothness. The construction unique to the bubble period gives a sense of scale and thickness in the low range. It allows me to thoroughly enjoy the music. The exterior has scratches and some cracks on the back of the cabinet. Serial A71210129 (Fujisawa Yukishi)
Maintenance information: 2022.11.25 manufacturer maintained (attenuator disassembly, contact cleaning. Attenuator and knob installation reworked. Foundation solder correction. Internal cleaning. (General adjustment)
Accessories: copy of instruction manual
Main specifications: stereo output 55 W+55 W (8 ohms) pure A grade operation, mono output, 220 W (balanced input), frequency characteristics, 5 Hz to 300 kHz, damping factor, 100 S/N ratio, 110 dB, balanced input terminal, direct reading type level indicator, W444 x H211 x D417 mm, 22 kg
Maintained by the manufacturer! A system in which Denon's DP-5000F phono motor and SAEC tonearm WE-308, which is highly regarded for its high accuracy, are mounted on the cabinet Lead-console Type2. The DP-5000F is a high-performance phono motor that inherits the elegant and unique design of the previous model DP-5000 and has the same performance as a commercial device, and also adds ease of use and reliability. The WE-308 uses hard rubies for double knife-edge bearings, and is characterized by crisp, clear sound and accurate sound image localization. Furthermore, heavyweight cartridges can also be used with self-made subweights by the previous owner (Oikawa Tetsuji)
Maintenance information: 2024.5.12 Denon maintained (30 defective transistors replaced, speed adjusted)
Accessories: Heavyweight
Main specifications: DP-5000F: servo type direct drive WE-308: double knife edge static balance universal type total length 329 mm effective length 240 mm overhang 5 mm needle pressure 0 to 2 g W510 x H210 x D456 mm (actual measurement)
Maintained by the manufacturer! *The FR-54 lifter is broken, and the inside force canceller weights are out of stock, but parts cannot be obtained, so this part is the current situation. A record player with FR's FR-54 mounted on DENON's DP-3000! The cabinet is a DK-100F, a turntable with precise rotation and a smooth tone, and an arm with a simple form without unnecessary decorations and a stable stability arm, and a very practical system. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 450206 (Asaine Tomoho)
Maintenance information: 2024.5.3 Denon maintained (16 phono motor transistors replaced. (Missing arm parts are currently sold because parts cannot be obtained, check the sound output)
Accessories: copy of instruction manual
Main specifications: DP-3000 servo type direct drive speed 33 1/3, 45 rpm FR54 static balance type short arm effective length 245 mm needle pressure range 0 to 3 g compatible cartridge weight 3 to 20 g overall part W530 ✕ H180 ✕ D435 mm
※The wood cabinet is being repaired. Maintained! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Maintained! A system equipped with DENON's highest-model phono motor DP-80 at the time and DA-401 tonearm mounted on a genuine cabinet DK-300. You can enjoy music slowly with stable operation by combining the DP-80, which incorporates plenty of advanced technology from the time, such as a dual-structure turntable and AC servo motors, and the DA-401, which prevents the needle from being violently touched by the influence of record boards by reducing weight. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 118435 (Hiroki Aso)
Maintenance information: 2024.4.22 maintained (TR replacement normal/variable SW repair power capacitor replacement speed adjustment sound output test)
Accessories: copy of the dedicated shell instruction manual
Main specifications: DP-80 quartz lock direct drive outer rotor 3-phase AC servo motor, double structure, aluminum die-cast turntable, compatible with 33/45 rotations, DK300 dimensions W550 x H190 x D470 mm, DA401 static balance type, effective length 244 mm, needle pressure range 0 to 2 g, total weight approx. 24 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 158,000 yen Maintained. with cabinet! Macintosh transistor AM/FM tuner. You can enjoy the deep, chiseled sound typical of McKinn even with a tuner. Small scratches and dullness can be seen. (GOTO Daiki)
Maintenance information: 2024.4.11 Maintained (poor contact with tuning encoder VOL → cleaning, other checks. (Reinstall the pan lock.)
Accessories: copy of instruction manual
Main specifications: stereo compatible digital display FM/AM tuner W406 x H138 x D330 mm
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
The price has been drastically reduced. 2024/1/30 sales price 25,000 yen. This is a wood cabinet for large panel power amplifiers such as the Macintosh MC7300. The front interior dimensions are 432 x 166 mm. The product is compatible with non-panlock specifications, and the panlock is missing. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 panlock mounting screws
Main specifications: W467 x H203 x D368 mm 5 kg (actual measurement)
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/7/31 Sales price 15,000 yen*Currently sold. It is a 2.1 channel speaker system that perfectly matches Bose's unique compact, high-performance speaker technology with bass reproduction technology. You can easily enjoy simple 2.1 channels. As for the exterior, there are cracks in the woofer cabinet, overall dullness, and small scratches. Serial 990701 (Yonejima Satoshi)
Maintenance information: 2023.7.31 Operation confirmed
Accessories: no accessories
Main Specifications: Rated Input 100W Impedance 6Ω Satellite Speaker 6.0 cm Driver x 2, Antimagnetic Type, W78 x H157 x D104 mm, 1.1 kg, Subwoofer, 13 cm, 2 Drivers, W485 x H358 x D192 mm, 9.1 kg
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
Self-made cabinet for GARRARD 301 with double arm specifications. The 3012 Series 2 and SMG-212 were mounted on the tone arm installation port. You can see the appearance, peeling veneer, abrasions, bruises, etc., and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W760 x H265 x D520 mm 14.4 kg (actual measurement)
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
Disposal prices have been reduced. Member prices are not applicable. 2013/7/23 sales price 298,000 yen ※ longitudinal vibration SP special gramophone. serial 6083. The Thomas Edison Sound is now being revived after 100 years. I am impressed by the well-conceived metal horn system, rotation adjustment mechanism, volume adjustment mechanism, etc. in the old fashioned way. There are scratches etc. on the cabinet that make it feel old. It has been repaired to a level where there is no anxiety about playback. Can be used normally (Yasuhito Koshihama)
Maintenance information: 2013.2.17 Maintained (sound box repair, spring repair, rotation adjustment mechanism repair, brake repair) 2013.7.23 operation checked
Accessories: handle, snail
Key Specifications: The needle tip of the sound box is a diamond. Horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
Disposal price reduction. 2013/9/16 sales price 298,000 yen longitudinal vibration SP special gramophone. serial 67906. Thomas Edison's rise to fame was the invention of the gramophone in 1877. If you think about the sound from 100 years ago, it's indescribably moving. Immerse yourself in your unique view of the world. The exterior has scratches, dirt, etc., and there is a cabinet crack on one side of the back (Oikawa Tetsuji)
Maintenance information: 2013.7.31 Maintained (brake shoe replacement, position adjustment, rotation system disassembly repair) *Normal SP cannot be regenerated. Please prepare SP (thick SP) for longitudinal vibration.
Accessories: handle, snail
Main specifications: horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki)
Accessories: None
Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg