*A new dust cover is being created. Maintained by the manufacturer! Comes with SHURE M44G! A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that moves the tone arm to the desired position to perform without touching it are convenient, so you can easily enjoy analog (Murakoshi Yoichi)
Maintenance information: 2024.5.9 manufacturer maintenance (arm disassembly repair, arm position detection CDS replacement. Other parts are inspected and operation tested.)
Accessories: SHURE M44G, instruction manual (copy), dust cover (in preparation)
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Digital sound repair machine. By predicting an ultra-high frequency range of 20 kHz or more and outputting it in addition to the original sound, it feels smooth, and the sound quality changes to very comfortable to listen to. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.10 operation confirmed
Accessories: none
Main specifications: 1 RCA input/RCA output each, 5 stage effect switching size W132 x H71 x 334 mm weight 960 g
This is a 5-layer audio board. It combines high rigidity, high specific gravity, and high damping properties, and strongly prevents floor noise. It is ideal for installing large speakers, etc., and has a sense of volume and adjusts mids and bass in a well-balanced manner. Some dents and scratches are conspicuous (Sasaki Shota)
Accessories: none
Main specifications: W750×H55×D600mm 18.5kg
The price has been drastically reduced. 2024/5/10 sale price 398,000 yen one-owner item! Instantaneous power reality of up to 960W has been acquired from 120W (8Ω), which pursues drivability for all speakers, and is compatible with pure A class operation of up to 6W by setting bias current. A masterpiece that combines rich musical expression with high power. There is rust on the balance terminal, but it is good without any other noticeable scratches (Sasaki Shota)
Maintenance information: 2024.5.10 operation confirmed
Accessories: manual, power cable
Main specifications: rated output 120W+120W (8Ω) /stereo, 240W+240W (4Ω) /stereo, 480W (8Ω) /mono instantaneous maximum output/damping factor 960W+960W (1Ω) /stereo, 1920 W (2Ω) /mono time/350 input sensitivity/input impedance 1.1 V/120W (8 Ω) /unbalanced 51 kΩ, balanced 34 kΩ input/output unbalance 1 system, balance 1 System/large speaker terminal 1 system W440 x H190 x D427 mm 27.5 kg
※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of the ReSona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
The disposal price has been reduced (member prices are not applicable) 2023/5/9 sales price 35,000 yen with casters. Hayami's 5-tier vertical audio rack shelf can be changed to a 16mm pitch. The 4-way open structure also has excellent heat dissipation. Sound countermeasures are also good with heavy weight MDF+particle board. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Main specifications: 4 shelves, load: top plate/bottom plate 150 kg, adjustable shelf 50 kg W604H992 x D580 mm (height 1060 mm including casters), weight 58 kg
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and is a driver that is easy to balance with various woofers and tweeters (Daiki Goto)
Maintenance information: 2024.5.9 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Waste material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. DCR (44006/55ohm diaphragm undamaged), DCR (44007/55ohm diaphragm undamaged))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained! A class mono power amplifier developed for wideband playback. It boasts a natural and smooth playback sound, and you can feel the strength you wouldn't think of 20W. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance details/output relay replacement for 2 units, level switch disassembly, polishing grease application, solder repair, interior and exterior inspection and cleaning, DC adjustment, running test.)
Accessories: none
Main Specifications: 20W+20W (8Ω) Pure Class A Amplifier Frequency Characteristics DC to 200kHz Pure Copper Machined SP Terminal Equipped W224 x H103 x D390 mm 6.5 kg
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Daiki Goto)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
A cartridge designed by the V15 type3 development team, which is synonymous with light needle pressure needles. The sound quality with a high degree of perfection, which achieves both the subtlety of MC cartridges and the stretchy sound quality due to light needle pressure elliptical needles, is attractive (Daiki Goto)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: mm type output voltage 4.7 mV needle pressure 0.75 to 1.5 g playback frequency band 20-20,000 Hz channel separation 25 dB channel balance 2 dB DC resistance 1.55 kΩ dead weight 6 g
RCA cable, 1.5 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Kojima Yosuke)
Accessories: none
MC cartridge included with the DP-32F. You can enjoy a wide range of sources with bright, punchy sound reproduction with unobtrusive sound quality (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: MC type output 0.3 mV playback frequency 20 Hz to 40 kHz needle pressure 1.8 ± 0.3 g
YAMAHA MC type cartridges. It plays strings and vocals with high transparency and freshness. There is rust on the cantilever (Daiki Goto)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: 10 Hz to 45 kHz output voltage 0.5 mV impedance 50 ohms needle pressure 2.0 g dead weight 8 g
PSE standard product Power strip for audio The OCB-1 series has a history of 25 years, counting from the first generation. It can be plugged into a 2P wall outlet installed in a general house, making it easy to use (Tamura Eiji)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: 4 ports (125V/15A/3P power plug compatible) W120 x D120 x H60 mm (box part) approx. 0.9 kg
※There is no problem with operation, but it is currently sold because it is cheap. It uses a custom-designed S3 servo that specializes in CD rotation speed, makes it possible to read CD data without loss, and is a CD transport that specializes in high-quality sound playback. Enjoy clear, clear sound that is clear, and clear. As for the exterior, there are dirt, small scratches, etc. on the top plate (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: output system S/P DIF · RCA · Toslink x 1 system W430 × H85 × D315 mm 4.7 kg
※Since it is cheap, it will be handed over as is. It is a small class D digital amplifier made in China, and it is one that seems to come in handy on a desktop, etc., even in terms of size. It is an inexpensive model with excellent cost performance. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, power cable
Main specifications: 150W×2 W100×H125×D10mm weight 1.45 kg
RCA cable 0.75 m pair high purity 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. The cable is soft and easy to handle. As for the exterior, there is dullness around the plug (Satoshi Yonejima)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: No accessories
The price has been drastically reduced! 2024/5/9 sales price 118,000 yen Denon's pre-main amplifier combines popularity and performance. The resolution is even higher than the previous model, and the sound quality is high and the SN is smooth, and it is a powerful machine that combines thickness and energy in the mid to low range. It works flawlessly with all genres of music. As for the exterior, there are scratches on the front and dullness throughout. Serial 031501903 (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cord
Main specifications: output 80W+80W (8Ω) PHONO input (MM/MC) size W434 x H181 x D435 mm weight 24 kg
※It is inexpensive because it is in poor condition such as chips or cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. The exterior has dirt, cracks, chips, holes, etc. (Tamura Eiji)
Accessories: none
It is a rare shell. It is a special gem that uses rhodium for both shell terminals and shell lead terminals (Murakoshi Yoichi)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: dead weight 17.2 g
Popular Quadraspires 4-tier rack. In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is subtly curved and cut so that vibration components gather at the four corners. In addition to spikes and spike holders, external casters with unknown load capacity are included. There are rubber foot marks, small scratches, etc. on the top surface (Murakoshi Yoichi)
Accessories: spikes, spike receivers, external casters (load capacity unknown)
Main specifications: 4-tier rack, 180 mm between shelves, W600 x H690 x D475 mm, 13.3 kg
In addition to the flat characteristics of DL-103 yuzuri, this MC cartridge is attractive for its transparency and good granularity. Amorphous boron used in high-grade models DL-1000A and 305 is used for the cantilever. The cantilever does not bend, and the stylus is good (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output 0.12 mV playback frequency 20 Hz to 60,000 Hz needle pressure 1.2 g to 1.6 g impedance 40 ohms dead weight approx. 5.6 g
※There is magic writing, and the logo plate is out of stock, so it's cheap. Good stylus! This is the first product of Audio-Technica, an MM type stereo cartridge that became a long-time seller for its well-balanced, natural sound. (MURAKOSHI Yoichi)
Maintenance information: 2024.5.7 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 5 mV needle pressure 1.0 to 3.5 g (optimal 2.5 g) playback frequency band 20-21,000 Hz± 3 dB load resistance 50 kΩ DC resistance 450 Ω impedance 1.8 kohm/1 kHz needle tip 0.7 mil dead weight 9.5 g
Maintained! Stereo power amplifier equipped with output impedance control. It is a power amplifier from the heyday of separation, which is supported by a solid power supply unit and chassis, and can firmly reproduce even the smallest nuances. There are dullness and small scratches on the exterior (Tomonori Asae)
Maintenance information: 2024.5.9 Maintained (replacement of defective output relay contacts. Replace deteriorated capacitors in the power supply circuit. (Repair and adjustment within each circuit)
Accessories: none
Main specifications: rated output 120W+120W (8Ω Class B) 30W+30W (8Ω Class A) rated power consumption 330W W435 × H146 × D381 mm 21kg
Maintained! The balance between thickness and sharpness of the sound is good, and the sound conveys the breath of jazz and rock. The thick sound image and rich mid-range, which cannot be enjoyed with today's amplifiers, are exquisite. The range is moderate but the Old McKinn sound has instantaneous power. The slightly smokier tone than the MC2500 is attractive. As for the exterior, in addition to wear and tear and dullness over time, yellowing can be seen. Serial 5Y353 (Yamato Yuki)
Maintenance information: 2024.5.9 maintained (power stage Tr short, output boat, Tr in input board, capacitor, lamp broken, RCA, switching SW replacement SW, VOL cleaning, input shield cable ground solder treatment)
Accessories: Power cord, copy of English instruction manual
Main specifications: 300W+300W (mono 600W) 0.5 to 16 ohms W483 x H267 x D432 mm 58.1 kg
※Since the Y lug is cut on one side, it is inexpensive. This line improved the design of Revisona, which is a 2.5 m pair front speaker cable line. You can enjoy pure sound with a sense of dynamism, just like a PAD. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
The price has been reduced! 2023/5/9 sales price 17,000 yen set of 4. A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
Maintained! *Remote control is out of stock. A control amplifier that inherits the sound of Yamaha's famous C2a. It uses a highly reliable phono equalizer, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. There is overall dullness and small scratches (Tomoho Asaine)
Maintenance Information: 2023.12.8 Maintained (PHONO circuit repair adjustment. Power supply circuit input circuit and other circuit board soldering correction. Disassemble the PHONO switch and polish the contacts and apply contact cleaner. Contact correction for other volume types. (Long time sound check)
Accessories: copy of the manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
The disposal price has been reduced (member prices are not applicable) 2023/5/9 sales price 19,800 yen It is cheap because it is in poor condition! *Currently sold. A horn-shaped tweeter that is familiar to the ear. The appeal is that it's easy to read, but it doesn't hit your ears, so you won't get tired of listening. On the exterior, in addition to a feeling of use such as dullness and small scratches, some terminals are damaged (Asaine Tomoho)
Maintenance information: 2024.5.9 operation confirmed
Accessories: none
Main specifications: horn type tweeter frequency characteristics 2.5 kHz to 22 kHz 8 ohms cutoff frequency 2.3 kHz recommended crossover 3.5 kHz efficiency 105 dB W83 x H83 x D94 mm 1.1 kg
Easily switch between 4 speaker systems with one touch. No power required. You can individually play 4 speakers with 1 premain amplifier. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Main specifications: input/output terminals, one-touch speaker cable terminals x 10 (input 1/output 4, or input 4/output 1), can be connected, amplifier, maximum output, 250 w/ch, external dimensions: H53 x W240 x D182 mm, mass: 730 g
Balance cable, 1.0 m pair, the world's purest D.U.C.C., single conductor, polyolefin insulation. Copper-laminated polyester tape & oxygen-free copper double shielding. The crisp ease of a single line is fully expressed. The exterior has a feeling of use such as dullness or rubbing (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Maintained by Electri. A new generation of performance has been achieved by adopting a powerful new microprocessor and the latest audio-grade parts. All digital inputs are integrated into separate slot-in modules, and modules can be exchanged to support future new formats. You can experience the new era of McKinn sound, which is highly transparent and spacious. The top plate is rubbed and there is a small scratch (Oikawa Tetsuji)
Maintenance information: Maintained on 2024.5.1 Electric (front display assembly replaced. Front switch damage replacement. Update the console firmware program to the latest version. Set to factory default state. Operation confirmation, other inspections)
2024.5.8 Maintained (acrylic removal on meter and display, removal of internal fog)
Accessories: remote control, instruction manual, power cable, original box
Main Specifications: Frequency Characteristics: 10Hz to 100kHz S/N Ratio: Phono (MC) 80dB · Phono (MM) 82dB · High Level 95dB · Power AMP 113dB Analog Input: RCA ✕ 5 System/ XLR ✕ 1 System/ MC/MM ✕ 1 System Each Digital Input: USB (PCM32bit/384kHz, DSD256, DXD384KHz) ✕ 1 system/TOSLINK/coaxial (24 bit/ 192 kHz) ✕ 2 systems each, MCT (CD/SACD) ✕ 1 system W445 × H194 × D476 mm weight 34.1 kg
Maintained, including the creation of a new dust cover. A record player that uses a micro belt drive system. The arm is the company's MA-505X. You can enjoy the goodness of analog with a combination of a turntable, which has a reputation for stability and good sound separation, and an arm with good sensitivity and sound. The metal part has dullness appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.8 Maintained (motor disassembly, brush cleaning, oil application to bearings, platter bearing cleaning, internal bearing ball replacement. Arm disassembly and cleaning, bearing replacement, assembly adjustment. Electrolytic capacitors and semi-fixed resistors were replaced. Disassemble and clean the VOL for speed adjustment. Insulator created. Turntable rotation speed adjustment, arm needle pressure check. Check the sound output. Exterior cleaning, comprehensive operation confirmation inspection, new dust cover creation)
Accessories: copy of instruction manual, EP adapter
Main specifications: belt drive turntable diameter 30.6 cm, 3.2 kg speed fine adjustment range ± 3% W496 × H155 × D400 mm approx. 12 kg
The price has been reduced! 2024/5/8 sales price 348,000 yen This model is a new reference model for Technics direct drive turntable systems. Stable rotation and reduced vibration are achieved by adopting a coreless direct drive motor. Please enjoy the moment of interacting with music through the rich sound of analog records with this model. There is a thread on the dust cover on the exterior. Serial GM2fa001044 (Fujisawa Yukishi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: instruction manual, power cord, connection cord, 2 types of auxiliary weights
Main specifications: Direct drive turntable system (manual) rotation speed 33/45/78 rotation speed adjustment range ± 8/± 16% universal S-shaped tone arm static balance arm effective length 230 mm overhang 15 mm arm height adjustment range 0 to 6 mm needle pressure adjustment range 0 to 4 g (needle pressure direct reading type) 453 x H173 x D372 mm 18 kg
Maintained. It is a model equipped with the SME 3009R on the LINN LP12. Compatible with everything from lightweight types to heavyweight cartridges such as SPU. Please enjoy the good balance of the large number of sounds unique to analog, the separation of tones, and the profound thickness. There are scratches and dullness on the exterior (Tamura Eiji)
Maintenance information: 2024.5.8 Maintained (power circuit electrolytic capacitor replacement. Arm operation and voice check. (*33 rotations only)
Accessories: No accessories
Main specifications: 3009r/static balance type short type needle pressure 0 to 5g compatible cartridge weight 9.5 to 22 g LP12/W445 x H140 x D356 mm 10.5 kg
Hi-Fi is in stock for the first time! MM cartridge that uses a boron cantilever and a solid oval needle. It is a delicate tone that is well-balanced from high to low frequencies. The degree is good. (FUJISAWA KOSHI)
Maintenance information: 2024.5.8 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: mm cartridge output 3.0 mV frequency characteristics 20 Hz to 20 kHz needle pressure 1.3 to 1.8 g dead weight 6.7 g
A typical woofer attached to first-class products such as the Exclusive2402 and Westlake Audio. It is a highly stable model that can withstand professional use. The response speed is fast and the sound that makes it stand up well is attractive. The exterior has dullness and small scratches. Serial OA8600/OC8677 (Yonejima Satoshi)
Maintenance information: 2024.5.8 sweep test good
Accessories: instruction manual
Main specifications: 40cm cone woofer frequency characteristics 28 Hz to 1000 Hz 8 ohms (measured 7.9 ohms) output sound pressure level 97 dB dimensions diameter 400 mm x depth 167 mm 11 kg/1 unit
The price has been reduced! 2024/5/8 sales price 45,000 yen ※Pedestal is out of stock. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator test is good
Accessories: instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001612044 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
※Since it is for business use, it will be handed over as is. Genuine Hibino. Amcron commercial amplifier. It is compatible with high and low impedance and is compatible with flexible system designs. It is a lightweight yet high-power car. The exterior is dull and dirty. ※Please use a dedicated terminal for input. Serial 8001225830 (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: power cable, instruction manual (English)
Main specifications: 300W+300W (8Ω) frequency characteristics 20Hz to 20kHz W483 × H89 × D382 mm (excluding protrusions) mass 10.3 kg
Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, square peeling, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
JBL's exponential horn. Since it is a longhorn, it can be used at low crossover frequencies. Together with an acoustic lens, it is possible to create a monitor sound with high directivity. The exterior has bald paint, dirt, etc. Serial 20444/20547 (Tamura Eiji)
Accessories: none
Main specifications: crossover frequency 800 Hz sound pressure level 108 dB (using 2308 lenses) throat diameter 2.5 cm diameter 156 x D 293 mm weight 1 kg/book
The dust cover is out of stock, so it's cheap. The mk4 model is a classic Technics analog player. It is a 78-rotation compatible and cable detachable model, which is rare in the 1200 series, and has strong consumer elements. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: copy of instruction manual
Main specifications: Direct drive, quartz control, rotation speed 33, 45, 78 rpm, tone arm, universal S-shaped static balance gimbal suspension system, needle pressure adjustment range 0 g to 4.0 g, W453 x H162 x D360 mm, 12.5 kg
Maintained by the manufacturer. A high-performance deck that inherits the performance of the famous DRAGON. Since each adjustment is automatic, the design is extremely easy to use and friendly to beginners. It is a model with a wide frontage and depth that also incorporates functions for enthusiasts, such as calibration functions. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 Manufacturer maintained (mechanism disassembly, cleaning, adjustment)
Accessories: remote control, instruction manual
Main specifications: Discrete 3-head deck, azimuth adjustable during playback, 20 to 20,000 Hz, W435 x H135 x D306 mm, 9.0 kg
If you are looking for an AV switch selector, 4 ports, 4 inputs, 1 output, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 continuity confirmed
Accessories: instruction manual, original box
Main specifications: W136 x H43 x D88 mm 231 g (actual measurement)
※Inexpensive because it is in poor condition. Surround system by the brand NIRO by Nakamichi Jiro, the former president of NAKAMICHI. 5.1 channel surround is achieved with a single speaker and subwoofer. A reference model using a full digital amplifier with thorough sound quality measures. You can see a feeling of use on the exterior, stains on the saran net, deposits on the top plate of the woofer, and dullness, scuffs, etc. all over (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 sound output confirmed
Accessories: remote control, instruction manual, upgrade software
Main specifications: 3 input optical systems, 1 coaxial system, 2 analog speaker output 30W x 5ch, subwoofer 50W compatible formats DOLBY DIGITAL, DTS, AAC, DOLBY PRO LOGIC2 speaker 8cm full range sealed 8Ω woofer 20cm cone 6Ω body W200 x H55 x D296mm 2.2 kg, speaker W318 x H117 x D201 mm 3.4 kg, woo Fur W297 x H327 x D297 mm 6.5 kg