※Since it is cheap, it will be handed over as is. The perfect power amplifier for the company's “101 MM” speaker. Although it is small, it also has a solid output, and a bookshelf sized speaker can drive well enough. A high output mono amplifier can also be converted to a changeover switch. The exterior has dirt, scratches, and paint removal. Serial 42F020035 (Yonejima Satoshi)
Maintenance information: 2024.2.21 Operation has been confirmed (there is a gap in VOL, which is the current situation)
Accessories: No accessories
Main specifications: output: 20W+20W (4Ω) 40W (4Ω, MONO) input: RCA (for 5V high level/150mV for low level, 1 system each) Speaker output: 1 system (MONO output switchable) DV6V power output terminal equipped (MAX 200mA) W218 x H60 x D137 mm weight 2.6 kg
The price has been reduced! 2024/2/19 sales price 128,000 yen ※115V specification. Minda's vacuum tube premain amplifier developed for the European market. Equipped with a KT120, the bass is thick and powerful, and the sound is impressive. Also, it is attractive that it is compatible with all 4 types of vacuum tubes, such as KT88. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.2.19 Operation confirmed (sound output confirmed at 115V)
Accessories: instruction manual, remote control, power cable, fuse x 2
Main specifications: Vacuum tubes used TUNG-SOL KT120 x 4, Ruby 12AX7 x 2, Ruby 12AU7 x 2, rated output, 55W x 2, impedance 4Ω, 8Ω, input sensitivity, 300mv, frequency characteristics, 18Hz to 60kHz, S/N ratio, 90dB, input 4 systems, power consumption 140 to 250 W, size W420 mm x H400 mm x D220 mm, weight 24 kg
Maintained in 2022! It is a premain amplifier that allows you to enjoy the moist, glossy mid-high frequencies typical of Marantz, and the thick low frequencies, and it also makes you feel like analog. It can be switched between Class A and Class AB, and the MM/MC can also be switched with the front switch, so it is fully equipped. It is in good condition for its model year. Serial MZ019539410073 (Fujisawa Yukishi)
Maintenance information: 2022.12.11 maintained (LR main amplifier, other solder repair, output relay, headphone relay replacement, input selector, reck-out switch disassembly, polishing grease application, volume cleaning, MM/MC switch replacement, internal inspection and cleaning, idling confirmation, operation inspection. (The MM/ MC switch is non-shorting, so please reduce the volume when switching)
Accessories: copy of instruction manual
Main specifications: 25W+25W (8Ω) during Class A operation 180W+180W (4Ω), 150W+150W (6Ω), 130W-130W (8Ω), W454 x H170 x D460 mm 27 kg
The price has been drastically reduced. 2024/2/17 sales price 228,000 yen This amplifier was planned to commemorate the 35th anniversary of Aura Design. This anniversary model, which bears the VA40 of the first model, is a model that faithfully reproduces the circuit design at that time. The MOSFET single push-pull reproduces fresh sound. This model will be a domestically manufactured model. The exterior is beautiful with no noticeable scratches. Serial ARI0018 (Tamura Eiji)
Maintenance information: 2024.2.17 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 50W+50W (8Ω) W430 x H76 x D350 mm weight 7.2 kg
The price has been reduced. 2024/2/12 sales price 99,800 yen A pre-main amplifier with clear sound without unnecessary dramatization. You can enjoy the company's unique tone, which is clear yet powerful and sharp. Both the exterior has a modern and smart impression. You can use it regardless of genre. There is a small peeling scratch on the top plate. Serial 101040018 (Fujisawa Yukishi)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box, spikes
Main specifications: 75W+75W (8Ω) 115W+115W (4Ω) W420 × H88 × D214 mm 7.0 kg
The price has been reduced. 2024/2/5 sales price 45,000 yen A digital premain with a neutral, clear tone and spatial expressiveness. While saving power with a power consumption of 42W, it demonstrates outstanding speaker driving power, making it ideal for listening at low volumes. The exterior is dull. Serial 21S01961 (Yonejima Satoshi)
Maintenance information: 2024.2.5 operation confirmed
Accessories: power cable
Main specifications: rated output 60 W x 2 (8 Ω) S/N ratio 100 dB frequency characteristics 5 Hz to 100,000 Hz input sensitivity 500 mV/10 kΩ input: 3 RCA analog systems, 1 front mini stereo jack system W420 x H98 x D243 mm 6.0 kg
The price has been drastically reduced. 2024/2/17 sales price 278,000 yen*Since there are scratches on the top of the front panel and paint peeling on the top plate and sides, it is sold at a low price. The next generation model of the L-550AX has been reviewed and refined from basic performance. We have introduced the latest technology comparable to the higher-level model L-590AX2, such as the unique ODNF 4.0 amplification feedback circuit, the new LECUA 1000, and a buffer circuit with a discrete configuration. While acquiring sound with a sense of luster and density unique to pure A class amplification systems, it has achieved resolution and expressiveness that exceeds its class (Sasaki Shota)
Maintenance information: 2024.2.17 Operation confirmed
Accessories: original box, remote control, manual, power cable
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
Maintained! Standard ES Primain model released in 1986. It is also equipped with a cartridge load selector, making it a perfect car for those who want to use it in a wide range of ways. The sound has momentum and the sharp sound is attractive. Mainly there are abrasions and paint peeling on the grill part of the top plate, damage to the side panel, and peeling of the decorative plate on the bottom (Kojima Yosuke)
Maintenance information: 2024.2.18 maintained (main volume, headphone relay, speaker relay, mute SW replacement, 14 internal resistors replaced, 2 input switches, cartridge load switch, speaker switch, polishing grease applied to each disassembly contact,
DC idling, DC balance adjustment, and sound output for each input/output connection have been confirmed)
Accessories: none
Main specifications: 105W+105W (8Ω) line input 3 systems phono input 1 system (MM/MC switching) tape system 3 systems W470 x H161 x D436 mm 18.6 kg
The price has been reduced. 2024/2/16 sales price 55,000 yen Yamaha premain amplifier compatible with DSD 5.6 MHz native playback and PCM384 kHz. It is equipped with cutting-edge equipment such as a USB DAC function, and has a convenient design that can be easily operated with only knobs and buttons, and boasts a clear and wide range that matches the times. The exterior is good with no noticeable scratches. Serial Y227381WY (Jun Tamai)
Maintenance information: 2024.2.16 Operation confirmed
Accessories: remote control instruction manual, power cord, original box
Main specifications: 100W+100W (8Ω) input 9 systems (CD x 1 tuner x 1 line x 3 phono MM x 1 optical digital x 1 coaxial digital x 1 USB Type B x 1) output 5 systems (reck-out x 2, subwoofer x 1, headphone x 1, USB-DC out x 1) W435 x H152 x D387mm 12.1 kg
Maintained! A limited edition with a limited production of 200 units is now in stock. The terminal part has a large gold-plated design compatible with Y-lugs and banana plugs, improving ease of use. In addition to the punchy sound quality, the mid-high range texture is also stable. It is compatible with a wide range of music, from classical music to rock and pop music. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.16 maintenance (balance VOL disassembly contact refinement, application of grease to prevent oxidation and sulfidation. Front panel internal fog removal, input/output waveform confirmation, sound output test)
Accessories: remote control, manual, power cord, original box, wrench
Main specifications: 160W+160W (4Ω) 100W+100W (8Ω) input RCA5 system, XLR1 system, PHONO input MM1 system pre-out equipment W445 x H194 x D475 mm 16.8 kg
Full maintenance was carried out in 2020, including the replacement of capacitors and deteriorated parts from the exterior! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. Paint deterioration and rust can be seen on the exterior and back, but everything else is good for exterior maintenance (Kobayashi Hitoshi)
Maintenance information: 2024.2.14 operation confirmed 2020.7.1 maintained (cabinet maintenance (exterior repair/polishing/painting), SW/VR disassembly contact refinement, block capacitors, electrolytic capacitors, coupling capacitors, semi-fixed resistors, rectifier diodes, 9P sockets, spark killers, fuses, and SP terminals replaced. RCA terminal correction and polishing. Interior cleaning, circuit adjustment, waveform check, load test, sound output test.)
Accessories: copy of instruction manual, power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Maintained in June 2022! YAMAHA's heavyweight premain amplifier. The low frequency with good damping by a good power transformer and the clear sound typical of YAMAHA are attractive. The PHONO input is equipped with MC, making it a great specification for analog fans. The pre-main part can be separated, and there is potential for development into a separate part. There is peeling veneer, line damage, and cloudy rear panel (Daiki Goto)
Maintenance information: 2022.6.29 Maintained (all soldering deterioration in left and right main amplifier circuits fixed. Replace parts that have deteriorated due to burning. Remote slide switch disassembly contact polishing contact cleaner application. Solder correction in the equalizer circuit and other circuits. I/O pin jack polish (Panel button installation)
Accessories: instruction manual
Main specifications: 130W+130W (8Ω) 150W+150W (6Ω) PHONO (MM/MC) pre-main separable W473 x H169 x D464 mm 26 kg
Maintained in January 2022. The Sansui MOS FET premain is popular among 907 generations. It is an amplifier that thoroughly pursues circuits, mechanisms, and materials. It has a highly transparent texture unique to MOS, and the mid-high range unique to MOS, which is a bit different from conventional Sansui machines, is attractive. It is an amplifier that has a high overall power and is notable for its beautiful tone. The exterior has light scuffs on the front panel, switches, etc. (Murakoshi Yoichi)
Maintenance information: 2022.1.16 maintained (balance volume replacement, etc., each volume switch cleaning input selector, output relay replacement, headphone relay replacement, power supply unit, transistor replacement, solder repair, MM/MC reck out switch disassembly, polishing, offset adjustment inspection, interior and exterior inspection, cleaning operation confirmation)
Accessories: instruction manual (copy)
Main specifications: 80W+80W (8Ω) line input 3 systems, phono 1 system (MM/MC), tape system, 3 systems, power amplifier, direct terminal, 2 systems, dimensions W466 x H160 x D441 mm, weight 31 kg
Thoroughly review the interior and carry out maintenance on capacitors, transistors, etc.! A vintage model representing JBL. In addition to the extremely powerful and well-extruded sound quality, it also has a dry and tight tone unique to this era. The strong sense of energy in the low frequencies and the characters with clear outlines are excellent matches with old JBL speakers. It is a vintage masterpiece that stands out for its individuality. The exterior is painted light blue, except for the front. There is dullness and corrosion on the back. Serial 4165 (Yonejima Satoshi)
Maintenance information: 2024.2.7 maintained (deteriorated RCA terminals, deteriorated transistors, diodes, capacitors, lamps, fuses, semi-fixed resistors, heat dissipation sheets, AC cords, short pins, resistors replaced. AC outlet terminal rattling was fixed, all SW and VR were disassembled, the terminals were polished, and reassembled. Offset, idle current adjustment. Check input/output waveforms, check left and right balance, load test, and overall operation test to confirm normal operation. rated output test)
Accessories: power cord
Main specifications: 40W+40W (8Ω) W412 × H128 × D350 mm 11.8 kg
The price has been reduced. 2024/2/5 sales price 55,000 yen 2018 maintenance completed! Vacuum tube premain using KT-88. The clear sound is as sharp as it looks, with little distortion, and is attractive. The small size is recommended for those new to subsystems and vacuum tubes. There is a feeling of use such as appearance, dullness, scuffs, and corrosion on the terminals. Externally, there is a small scratch on the transformer part. Serial 03100307 (Fujisawa Yukishi)
Maintenance information: 2018.8.21 maintained (rotary SW (INPUT selector) repair, main volume disassembly and cleaning, input/output waveform confirmation, load test (1 kHz, 8 ohm load: both L and R channels: 6.2 W), sound output test, exterior cleaning)
Accessories: instruction manual, power cord, original box
Main specifications: 12W+12W vacuum tubes used, KT88 x 2, 12AX7 x 2, power consumption 60 W, W220 x H190 x D372 mm, 10 kg
The disposal price has been reduced. Member prices are not applicable. 2024/2/7 sales price 168,000 yen DSD compatible. It is a pre-main amplifier that combines a network player and USB-DAC functions with a Class D amplifier that achieves 60W (8Ω) driving power. A high-performance 32-bit stereo AKM DAC AK4490EQ chipset is used for the DAC section, and it allows you to hear the strong sound unique to primers (Daiki Goto)
Maintenance information: 2024.2.6 operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable
Main specifications: 60W+60W (8Ω) 100W+100W (4Ω) playable format WAV, LPCM, AIFF, FLAC, ALAC, MP3, MP4 (AAC), WMA, OGG, DSD input USB-TypeA, LAN (up to 192 kHz/24 bit, DSD128/5.6 MHz), Chromecast built-in, Apple AirPlay size W350 ✕ H73 ✕ D329 (including protrusions) mm weight 6.4 kg
The price has been reduced. 2024/2/3 sales price 99,800 yen A pre-main amplifier with an impressive Yamaha traditional retro design. It is an amplifier that inherits the characteristics of the delicate and elegant old-fashioned YAMAHA sound. It has a PHONO input and features a balanced ease of use in all aspects. Serial Y098913WY (Takasaki Atsushi)
Maintenance information: 2024.2.3 operation confirmed
Accessories: remote control, manual, power cord, spike cover
Main specifications: full stage balance amplification output 90W+90W (8Ω) Phono (MM/MC) W435 x H137 x D465 mm 22.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/3 sales price 168,000 yen Maintained! The first Accuphase premain amplifier. The exciting, sharp sound is compatible with JBL speakers, and it plays jazz and rock comfortably. The strength of the push and the thick, sharp sound are impressive. *If multiple speakers such as A+B are selected due to specifications, they will be connected in series. There is a slight feeling of use such as small scratches and dullness. Serial D5V417 (Takasaki Atsushi)
Maintenance information: 2024.2.3 maintained (main volume, coupling capacitor, semi-fixed VR, resistor exchange (electrolytic capacitor and semiconductor have been replaced in the past) solder correction VR and SW contact cleaning offset and bias adjustment, audio check for each input/output.)
Accessories: copy of manual, power cord
Main specifications: 100W+100W (8Ω) premain separable W455 x H152 x D355 mm 19.5 kg
A tuner pre-main amplifier that separates the basic circuit of the Aura Note Premier into the CD player section and receiver section, and is housed in a beautiful, thin and lightweight body with the same full size as the VA Series. The bright and cheerful tone, the speaker sounds mellow, and the driving power that exceeds what it looks like is also attractive. There is a small scratch on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.2.11 Operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: FM/AM tuner built-in premain amplifier output 50W+50W (8Ω) PHONO input (MM), 2 RCA inputs, 1 XLR input, 1 USB input (48 kHz/16 bit), 1 pre-out output, W430 x H64 x D300 mm, weight 6.4 kg
Entry machine for Marantz primain amplifiers. You can enjoy good sound in a compact size with a smart design and well-balanced sound quality. The exterior is generally good with no noticeable scratches (Kanai Hidetsugu)
Maintenance information: 2024.2.10 sound output confirmed
Accessories: remote control
Main specifications: rated output 40W+40W (8Ω) line input/3 systems (CD, TUNER, AUX/DVD), tape input/output/2 systems (RECORDER 2 systems) dimensions W440 x H117 x D341 mm weight 6.6 kg
Maintained! A popular model from the late Sansui period. While expanding the range, the sound that makes you feel the thickness and energy unique to the company still fits well with modern speakers. The punch power in the mid to low range to easily drive a medium bookshelf speaker is truly amazing. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 606070958 (Jun Tamai)
Maintenance information: 2024.2.10 maintained (tone, etc., muting subsonic processor input power amplifier, direct source, direct tape switch, dismantling, polishing, grease coating, solder repair, interior and exterior inspection, cleaning operation confirmation)
Accessories: copy of instruction manual
Main specifications: 90W+90W NEW HYPERα-X balance circuit PHONO (MM/MC) power amplifier with direct function W430 x H162 x D452 mm 18 kg
*Sold as is. LINE and PHONO sound can be produced, but since the speaker selector knob is not in good condition, such as wobbling, etc., it will be handed over as is without a guarantee. Technics pre-main amplifier. Exterior, dullness, corrosion, small scratches, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.2.2 operation confirmation (LINE, PHONO sound output OK, speaker selector knob wobbly)
Accessories: none
Main specifications: W430 x H120 x D285 mm 6.9 kg
The price has been reduced. 2024/2/8 sales price 278,000 yen Maintained! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. The exterior is scratched, dull, and has a feeling of use (Katsuji Hiura)
Maintenance information: 2024.2.7 maintenance (power amplifier direct, source direct, tape, recouped, loudness, muting, subsonic, processor, MM/MC) for disassembling switches such as the input selector and others. Output relay, headphone relay replacement, power amplifier, power supply circuit transistor, resistor exchange and solder repair, each volume, SW cleaning, bias, DC adjustment, interior and exterior inspection and cleaning, operation confirmation)
Accessories: instruction manual (copy)
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
The price has been reduced! 2024/2/7 sales price 378,000 yen A new-generation premain amplifier that integrates the performance of a reference separate amplifier into one housing. All stages are balanced from input to output. The smooth tone in the mid to high range is impressive, and it beautifully reproduces vocals, strings, etc. The bass also has a sufficient sense of volume, and the sense of scale is perfect. As for the exterior, there are small scratches and scratch marks on the front panel. Serial AHC152170400161 (Yonejima Satoshi)
Maintenance information: 2024.2.7 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: 200W+200W (8Ω) 400W+400W (4Ω) playback frequency band 5Hz to 50kHz phono (MM, MC), 4 analog input systems, 1 analog output system, W440 x H168 x D453 mm, 21.5 kg
The price has been drastically reduced. 2024/1/5 sales price 89,800 yen Hi-Fi pre-main amplifier for the network & streaming era. Network playback of high-resolution sound sources (up to DSD 5.6 MHz, PCM192 kHz/24 bit) and streaming services such as Amazon Music, AWA, and Spotify can be performed without using an external player, etc. The exterior is good with no conspicuous scratches (Mizusaki Ryo)
Maintenance information: 2024.1.5 operation confirmed
Accessories: remote control, instruction manual, power cord, antenna, original box
Main specifications: rated output 60W+60W (8Ω) streaming (Amazon Music, AWA, Spotify, etc.), internet radio, high-resolution file playback compatible W440xH125xD379mm (when the antenna is laid down) W440 x H190 x D379 mm (when the antenna is erected) mass 10.8 kg
※The insulator has been replaced with an external product (made of ceramic). This is DENON's mid-range model, and is a staple machine with an excellent sense of stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. The exterior is dull. Serial 5081501093 (Fujisawa Yukishi)
Maintenance information: 2024.2.7 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
It is a beautiful item with the original box! The 95th anniversary model, which was limited to 300 units in Japan, debuted at Hi-Fi Hall! It is a pure Class A amplifier with the motif of the best-selling model L-570 of yesteryear, and combines the quality of a separate amplifier with the high functionality of a pre-mainamp in one body. It is generally in good condition with no conspicuous scratches. Serial G00Q00033 (Yamato Yuki)
Accessories: Remote control instruction manual power cable (JPA-15000) original box (serial numbers on the box and main unit are different)
Main specifications: rated output 30W+30W (8Ω) 60W+60W (4Ω) W454 x H186 x D462 mm 27.7 kg
The disposal price has been reduced. Member prices are not applicable. 2024/1/25 sales price 128,000 yen Maintained at Denon! The second generation of the popular S10 series. Since it is equipped with a powerful power supply unit, the sense of energy in the low range is excellent, and it shows driving power that exceeds the price. The line with each tone is thicker than current Denon amplifiers, and the sound is full of volume, which is attractive. The exterior has dullness, threads, and small scratches. Serial 7127300047 (Yonejima Satoshi)
Maintenance information: 2024.1.25 manufacturer maintained (REC selector knob modified. Selector SW disassembly, contact cleaning. Amplifier circuit board soldering correction (both channels) speaker relay replacement. (Idling power adjustment, operation inspection)
Accessories: copy of instruction manual
Main specifications: rated output 100W+100W (8Ω) PHONO (MM/MC compatible) dimensions W434 x H181 x D485 mm weight 28 kg
The disposal price has been reduced! Member prices are not applicable. 2024.1.17 Sales price 45,000 yen Pre-main amplifier with digital input. It is now easy to connect to a PC, etc., and is also recommended for desktop audio. It has a transparent sound typical of Marantz, and is very comfortable to listen to. There are no noticeable scratches on the exterior. Serial MBDP122170717 (Fujisawa Yukishi)
Maintenance information: 2024.1.17 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: 45W+45W (8Ω) PHONO (MM) coaxial digital input 1 system optical digital input 2 systems W440 ✕ H105 ✕ D370 mm 7.8 kg
Maintained! The built-in D/A converter is compatible with digital sources, and digital signals from digital audio such as CDs, DAT, and BS tuners can be input. The exterior has line scratches on the front, and other scratches and scratches on the entire surface. Serial A60910342 (Hiroki Aso)
Maintenance Information: 2024.2.5 Maintained (LINE STRAIGHT SWITCH DIGITAL DIRECT SWITCH Disassembly Contact Cleaning Agent Application Sound Output Confirmed)
2023.10.23 Maintained (replaced with custom-made VR, speaker relay replacement, volume shaft joint installation, power board, INPUT board solder crack inspection, solder repair, DC idling, DC balance adjustment, digital RCA jack replacement, other input/output connection sound confirmation)
Accessories: none
Main specifications: rated output 180W+180W (6Ω, 20Hz-20kHz) 150W+150W (8Ω, 20Hz-20kHz) power consumption 330W dimensions W438 x H165 x D460 mm weight 20.0 kg
*Currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. You can enjoy stable and clear sound quality in both digital and analog. The exterior is dull and there is a feeling of use. Serial AFH121805597 (Yonejima Satoshi)
Maintenance information: 2024.2.4 operation confirmed
Accessories: remote control
Main specifications: 50W+50W (8Ω) line input 4 systems phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg
*Currently sold. The tuner has not been tested due to a shortage of dedicated FM antennas. All other inputs have been confirmed to work. It is a pre-main amplifier with a built-in wide FM tuner that can be connected to various devices, such as phono input equipped with a phono volume adjustment function and Bluetooth support, and can preset FM30 stations. Equipped with a Bluetooth standby function that allows this unit to be started via Bluetooth from a smartphone or the like. There are many scratches and small scratches on the exterior. Serial 2208201 (Yonejima Satoshi)
Maintenance information: 2024.2.4 operation confirmed
Accessories: No accessories
Main specifications: 100W+100W (8Ω) line 4 phono terminal (MM type) FM (wide FM compatible, 30 stations can be preset) Bluetooth (R) external dimensions W430 x H133 x D284 mm mass 6.9 kg
The price has been drastically reduced. 2024.2.1 sales price 328,000 yen A vacuum tube type premain amplifier with a 6L6GC push-pull configuration (fixed bias) that pays homage to the famous SQ38 series. The LECUA electronically controlled volume control attenuator was first installed in a vacuum tube amplifier product, and an MM/MC compatible phono amplifier circuit was built in. This model aims for a design and sound reminiscent of products from yesteryear. There is a small scratch (Daiki Goto)
Maintenance information: 2024.2.1 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: 20W+20W (6Ω), 18W+18W (8Ω), 14W+14W (4Ω) 6L6GC x 4, ECC82 x 3, W440 x H197 x D403mm 17.6 kg
The price has been drastically reduced! 2024/2/1 sales price 358,000 yen with original box! A pre-main amplifier equipped with the latest audio technology in Macintosh's traditional sound making know-how. Genuine Electri Despite its compact body, it also has 3 32 bit/192 kHz D/A converter inputs. The modern McKinn sound, which is rich yet has a wide range, is attractive. The exterior has a few scratches, etc., but it is generally beautiful. Serial AEM1843 (Tomonori Asaine)
Maintenance information: 2024.2.1 operation confirmed
Accessories: remote control instruction manual, power cable, original box
Main specifications: 100W+100W (8Ω) analog input terminal High Level input 4 systems (RCA) 1 system (XLR) Phono (MM) 1 system digital input terminal USB/COAXIAL/OPTICAL (32 bit 192 kHz) output terminal headphone output 1 system variable output 1 system with home theater passthrough W445 x H152 (including legs) x D476mm (including protrusions) weight 17.2 kg
The price has been reduced. 2024/2/3 sales price 298,000 yen*Inexpensive because there is a scratch on the upper corner of the front panel. Hi-Fi is in stock for the first time! The technical know-how of the flagship Grandioso has been consolidated into an integrated package. Although it's an introductory class, I feel the cost performance is high without cutting corners! Please give it a try. In addition to the exterior, as described above, you can see a feeling of use, such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: instruction manual, power cord, original box
Main specifications: output 100W+100W (8Ω), 170W+170W (4Ω) frequency characteristics (+0/-3.0 dB at 1W output) 10Hz to 100kHz W445 × H191 × D468 mm (including protrusions) 27.2k
Maintained! G-tune product. It is characterized by a medium to high range where you can feel precise and transparent while being soft. If you feel a sense of coolness in modern speakers, you may be able to find a compromise that adds a moist, familiar sound. The exterior is dirty and dull on the top plate, and slight corrosion can be seen on the back terminal (Mizusaki Ryo)
Maintenance information: 2024.2.3 Maintained by the manufacturer (replaced with a replacement because rust was seen in the battery box. There is output instability, speaker relay contact deterioration, and CONTOUR switch contact deterioration, and improvements have been implemented. The left channel of the tuner did not come out from time to time, and the input switching relay contacts deteriorated and replaced. Maintenance carried out.)
Accessories: remote control (replacement), power cord
Main specifications: 100W+100W damping factor 400 W430 × H121 × D360 mm 10.3 kg
The price has been reduced. 2023/12/26 sales price 15,000 yen*Currently sold. Remote control is missing. There is a slight gap left in the VOL. This is a pre-main amplifier with sharp, bright sound. It has a built-in MM/MC compatible equalizer, and is recommended for those entering analog record playback. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.25 Operation confirmed (there is a slight gap left in VOL, but the current situation is)
Accessories: none
Main specifications: 65W+65W (8Ω) power consumption 165W W430 x H150 x D415 mm 11 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/23 sales price 118,000 yen Maintained! Quad first-generation transistor preamp. It's a car that makes more noise than its size, and you can enjoy a variety of expressions with expressive power rich in shadows. When combined with the company's 303, etc., it has a thick, dark tone and a calm, elegant tone. You can enjoy classical and acoustic music with a glossy tone. Serial 14412 (Tomoho Asaine)
Maintenance information: 2024.1.23 Maintained (internal check, coupling C, power supply filter, etc. replaced, front button, front button, poor contact, SW, poor contact, cleaning, board connector, polishing operation check)
Accessories: copy of the instruction manual, power cable, connection cable
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
Maintained by the manufacturer! Triode line exclusive vacuum tube premain developed with the novel concept of an amplifier for women. With its compact, exquisite size and high design, it can be used in a variety of situations. The exterior is in good condition with no conspicuous scratches (Tomonori Asae)
Maintenance information: 2024.1.29 Maintained by the manufacturer (EL84 vacuum tube replacement selector part contact processing and other maintenance was performed
(Inspection and maintenance audition test for each part)
Accessories: original box
Main specifications: output 3W+3W (8Ω) vacuum tubes 6BQ5 x 2, 12ax7 x 2, dimensions W190 x D180 x H135 mm weight 4.7 kg
Full maintenance was carried out, from the capacitor to the exterior! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. Exterior maintenance has been carried out, but rust is scattered on the back. Serial 10121484 (Hiroki Aso)
Maintenance information: 2023.12.17 maintained (exterior repair/polishing/painting oil capacitor, block capacitor, electrolytic capacitor, film capacitor, fixed resistor, rectifier diode, DIN terminal, power supply SW, monitor SW, master VR, balance VR, rear panel VR, VR replacement, RCA terminal, polishing lever, SW, disassembly, cleaning, and oxidation prevention grease coating vacuum tube main part, 2 50CA10 replacement cabinets Exterior repair/polishing/oil finish input/output waveform confirmation residual noise check load test (27W+27W at 1 kHz sine wave 8 ohm load) sound output test)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
LUXMAN Class A premain amplifier. The L-550A was completely remodeled, including the housing. Like a new-generation amplifier, it is extremely thick yet can express tight bass. The bright, bright tone is an appeal unique to Luxman Class A amplifiers. There are some small scratches and dullness (Murakoshi Yoichi)
Maintenance information: 2024.1.28 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
Maintained! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior has small scratches, dullness, and a feeling of use. Serial 616103092 (Hiura Katsuji)
Maintenance information: 2024.1.11 Maintained (input selector switch disassembly, polishing, grease application, etc. TONE LOUDNESS MUTING
SUBSONIC TURNOVER processor, power amplifier, direct switch disassembly, polishing grease application TONE BAL installation correction, each volume, switch cleaning, internal inspection and cleaning, solder repair, adjustment inspection and operation confirmation.
Accessories: none
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
*Currently sold. TEAC stereo pre-main amplifier equipped with a high-resolution DAC. In addition to DSD5.6 MHz and PCM32 bit/192 kHz USB inputs, Bluetooth playback compatible with aptX codecs is possible. It is also a popular car for PC audio. Serial 1750139 (Fujisawa Yukishi)
Maintenance information: 2024.1.23 Operation confirmed
Accessories: remote control, power cord
Main specifications: DAC built-in pre-main digital input coaxial x 1 optical x 1 USB-B terminal x 1 compatible sampling frequency (PCM) 32/44.1/88.2/96/176.4/192 kHz (optical digital is 96 kHz) compatible number of bits 16/24 bits compatible sampling frequency (DSD) 2.8/5.6 MHz (USB only) 40W+40W (4Ω) 20W+20W (8Ω) W215 x H61 x D254 mm (protrusion) 2.1 kg (including)
The price has been drastically reduced. 2024/1/22 sale price 250,000 yen SA600 homage! This anniversary edition was released to commemorate the 75th anniversary of JBL's founding. It's equipped with cutting-edge streaming audio, wireless connectivity, Dirac Live room correction, and Class G amplifier technology. Above all, Dirac, whose sound field correction tunes the listening environment, is attractive. The impression is that the sound is completely new, and the tuning matches modern sound sources (Daiki Goto)
Maintenance information: 2024.1.22 operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable
Main specifications: output 200W (4Ω), 130W (8Ω) playback frequency characteristics 20Hz-20kHz ±1dB S/N ratio 120dB harmonic distortion ratio 0.002% input sensitivity 1V input impedance 10kΩ W449 × H114 × D327mm 12 kg
A high-resolution era pre-main amplifier compatible with DSD 5.6MHz native playback and PCM384kHz. It is equipped with cutting-edge equipment such as a USB DAC function, and has a convenient design that can be easily operated with only knobs and buttons. It is clear and has a wide range that suits the times. The exterior is good with no conspicuous scratches. Serial Y182250OQ (Fujisawa Yukishi)
Maintenance information: 2024.1.16 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: 100W+100W (8Ω) input 9 systems (CD x 1 tuner x 1 line x 3 phono MM x 1 optical digital x 1 coaxial digital x 1 USB Type B x 1) output 5 systems (reck-out x 2, subwoofer x 1, headphone x 1, USB-DC out x 1) W435 x H152 x D387mm 12.1 kg
*Currently sold. Luxman vacuum tube hybrid premain amplifier. This product was designed as an upper model of the LXV-OT7. The vacuum tube ECC802S on the front part has been increased in size compared to all models, the input terminals are gold-plated, the speaker terminals are banana compatible, and some other parts have been changed to solid aluminum, so the finish is particular about appearance. (FUJISAWA KOSHI)
Maintenance information: 2024.1.23 Operation confirmed
Accessories: AC adapter
Main specifications: output 5W+5W (4Ω) input RCA2 system