Maintained! This time, not only does it have 1 S-shaped one, but it also comes with 2 straight pipes! EXCLUSIVE's super popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. There are small scratches, but it is a good category even when viewed from the model year (Oikawa Tetsuji)
Maintenance Information: 2024.6.9 Maintained (Replaced due to semi-fixed volume disconnection. The transistor was replaced due to rotational instability. The electrolytic capacitor has been replaced. The arm bearing was cleaned, operated, and audio-checked. Each rotation lock has been adjusted and the voltage has been adjusted. (Silicone grease attached)
Accessories: transport screws, subweights, 2 straight pipes, silicone oil
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
Digital cable (BNC) 1.0 m (measured less than 1.2 m) An impeccably luxurious cable that combines delicacy and heaviness in each band. Not only is it clear and voluminous, but all sounds such as vocals, drums, and horns spread to the front, up, down, left, and right, creating a realistic sound. The exterior has deflections on the sheath (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
SP cable BW (Y lug → banana) 2.0m pair early 90s Synergistic Research
cable You can fully feel the sound unique to SOLID and thick Synergy with this entry cable. The exterior is dull due to aging (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
The 1,2m pair of XLR cables, NBS OMEGA 4, which has a low distribution volume, is in stock. It is a gem that has gained popularity among JAZZ and ROCK fans for its thick, energetic sound quality. It still makes me feel that CP is high. The exterior is good (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original bag
A special edition model commemorating the 70th anniversary of JBL's founding. The latest version that has been refined over the traditional 4312 series. A 12-inch diameter woofer unit equipped with the advanced 4429 is used. It is an all-round speaker with a sense of energy and good range extension. The exterior has dullness, small scratches, and threads. Serial 00687/00688 (Yonejima Satoshi)
Maintenance information: 2024.6.11 sweep test good
Accessories: saran net
Main specifications: 3-way bass reflex type 300mm woofer 125mm mid-range 25mm tweeter impedance 6Ω output sound pressure level 90dB frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
Equipped with an impedance changeover switch (LOW: 5 to 50 KΩ, MID: 40 to 100 KΩ, HIGH: 90 KΩ or more) that optimizes characteristics according to the input impedance of devices connected to a 1.0 m pair of RCA cables, a Valerie structure with all phase characteristics, and a high C/P model that employs many MIT patented technologies such as CVT couplers. (FUJISAWA KOSHI)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original box
※Inexpensive because it is in poor condition. Currently sold. This is a tall boy model of the Reference41MKII. The tuning focuses on the mid-range, so you can enjoy it regardless of genre. You can see a feeling of use on the exterior, holes in the saran net, peeling veneer, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 Operation confirmed
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, 10W to 150W, 20 cm cone type, 10 cm cone type, medium range, 1 cm dome type, W254 x H870 x D307 mm, 16 kg
Compared to the MK1 LP/cable demagnetizer, this brush-up model has a dramatically increased demagnetization effect! I dared to leave the protective sheet attached to the surface of the acrylic cover. The exterior is also good without major scratches (Oikawa Tetsuji)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W430 x H105 x D400 mm 9.02 kg
※ Sub weight is missing. Dust cover hingeless design 5th generation of the SL-1200 series. This is a high-grade model manufactured to commemorate the 30th anniversary. Its accuracy and durability are outstanding among many players, and it features clear sound with clear outlines. There is dullness, small scratches, and threads on the dust cover (Daiki Goto)
Maintenance information: 2024.6.11 operation confirmed
Accessories: dust cover, EP adapter
Main specifications: manual quartz direct drive 33/45 rotation universal S-shaped tone arm static balance type needle pressure adjustment range 0 to 4 g W453 x H162 x D353 mm 11.7 kg
YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. The logo plate is curved, and there is a large repair mark one step below (Oikawa Tetsuji)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please go back and forth on the label side 1 to 2 times (Daiki Goto)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
Full maintenance from internal dismantling and all checks to transistor and capacitor replacement! It's an amplifier similar to the SE400S, but the output has gone up from 40W+40W to 60W+60W, and the sound quality with excellent extrusion and sharpness has revived the sound of the good old days. In addition to the exterior and input terminals being replaced, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (all internal dismantling checks, L/R co-power stage Tr negative side characteristic defect, Lch driver Tr characteristic failure → replacement, in-board bypass C · power supply C broken → replacement, offset VOL contact failure → polishing, check)
Accessories: Power cable (external product)
Main specifications: output bandwidth 3 to 20,000 Hz, 90 dB SNR power supply 100V, 50/60 Hz, power consumption 200W, output 60 W+60 W, W385 x H125 x D93 mm
Set of 2 Hybrid audio board with wooden structure plus iron ball sand. The low frequencies, which are well-balanced and have a sense of volume, are tones that cannot be produced with a board such as granite. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: No accessories
Main specifications: load capacity 100 kg W300 x H44 x D 400 mm 5.5 kg/1 sheet
Maple type. Stand for small speakers made of solid Yonematsu. Compatible with most small speakers. The combination of Corian base and wood block material makes it resonate aggressively and accentuates the sense of spaciousness and depth. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 6 spacers
Main specifications: W280 x H615 x D370 mm 6.6 kg
This is a small bookshelf speaker from the 4th generation “MENUET.” Rosso color type. The glossy, small, yet high-quality sound that is traditional for MENUET is alive and well. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: saran net, instruction manual, original box
Main specifications: 2 way 2 speakers, low range, 115mm, cone type, treble range, 28 mm dome, playback frequency characteristics, 59 Hz to 25 kHz, input sensitivity, 86 dB, impedance, 4 ohms, W150 x H250 x D230 mm, 4.0 kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (protector circuit capacitor replacement, output relay replacement, phono and pin jack polishing, input selector, etc., switch disassembly polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor switch), each volume, switch cleaning, internal inspection and cleaning, adjustment inspection, operation confirmation, running test)
Accessories: instruction manual (copy)
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Manufacturer maintenance, including pickup replacement, is being carried out in 2022. A belt drive CD player equipped with a 24-bit fully balanced module DAC. This player is popular for its thick sound quality unique to belt drives and a natural tone with no sense of emphasis. You can enjoy vocals and classical music in high quality. You can see a feeling of use on the exterior, scratches on the top plate, marks, dirt, dullness, scuffs, etc. on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.1.13 maintained (spindle bell pick up replacement Assy shaft dismantling, cleaning, grease up inspection disc, confirm regeneration operation)
Accessories: stabilizer, replacement remote control
Main specifications: belt drive type CD player CD-R compatible audio output: XLR balanced RCA unbalanced digital output: coaxial (RCA) optical (optical) AES/EBU (XLR) W435 x H98 x D296 mm 10 kg
※Inexpensive because there is a lot of dirt. Comes with a dedicated stand and a self-made stand! Commonly known as the beehive horn, it is deeply popular among enthusiasts. The luster and energy of the mid-range when the 375 is attached is exceptional. You can see a feeling of use on the exterior, rust, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: stand, self-made stand (screws)
Main specifications: crossover 500 Hz, throat diameter: 50 mm, lens diameter: 343 mm, depth dimensions: 400 mm, approx. 15 kg
Harmonic resolution stabilizer. By placing an analog disc on the turntable shaft, resonance of the LP record itself, vibration due to air propagation, and noise caused by vibration of the record player itself are suppressed. The synergy effect with the isolation bass is remarkable, and you can expect rich sound quality and consistent low-level performances (Tamai Jun)
Accessories: original box instruction manual
Main specifications: size φ82.5 mm x H34.3 mm weight 315 g
Comes with a dedicated stand LS-500! Spirit is one of the most popular in the SX-500 series. Like Victor, who continues to preserve the natural sound, it makes acoustic instruments and vocals sound lustrous. There is a feeling of use on the exterior such as scratches and fading (Tamai Jun)
Maintenance information: 2024.6.11 sound output confirmed
Accessories: dedicated stand jumper cable
Main specifications: Sealed bookshelf type Alnico unit, body size dimensions W270 x H455 x D255 mm, 12.5 kg, stand size W294 x H440 x D330 mm, stand weight 6 kg
Marantz pre-main amplifier. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good, although there are very few minor scratches on the top plate. Serial AUY15230905053 (Takahashi Nobuyuki)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, remote control, power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
*Currently sold. Aiwa's DSD DAC. A/D converter and D/A converter set. It is possible to reproduce DSD 1-bit 64fs signals in SACD format. Even with analog input from compressed sound sources such as MP3s, the sense of localization, sound field, and luster of sound are improved. Serial D101211111 WD01210911 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: power adapter, HMDI connection cable, instruction manual
Main specifications: AX-D1: DSD1 bit/64 fs playback frequency band 20 Hz to 100 kHz (+0/-3 dB) dynamic range 102 dB or more, SNR ratio 102 dB or more at 1 kHz, 107 dB or more at 20 kHz channel separation 100 dB or more size W250 x D170 x H50 mm weight 1.5 kg AX-WD: LPCM192 kHz/24 bit/128 fs DSD1 bit/ 64fs (DSD64 mode, 2.8224MHz) size W250 x D170 x H50 mm weight 1.6 kg