Output transparent pair sales secondary: 50-100-200Ω x 2 ※The primary side seems to be 5 kΩ from the model number W110 × H150 × D80 mm 3.6 kg/piece (actual measurement, not including protrusions) There are fine scratches and paint peeling (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 6.3V/4A, 6.3-7.5-12V/5A x 2 W105 x H120 x D105 mm approx. 5 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which combines resolution with a natural, good tone. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Power transformer primary: 95-100V secondary: 250-0-250V/80mA, 780-750-600-400-0-400-600-780V/200mA W130 × H150 × D128 mm approx. 9 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
An entry model for the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
RCA cable 2.0m pair, solid high resolution even though it is MIT entry class. The cable has just the right amount of sound pressure and is easy to use (Tamura Eiji)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Output transformer pairs for sale for heavyweight large transformers, primary: 3.5 kΩ, secondary: 4-8-16 ohms, W150 x H185 x D150 mm, 11.2 kg/piece (actual measurement, not including protrusions) there are hook scratches in places (Kojima Yosuke)
Accessories: none
Maintained! More than 50 years have passed since the release of Sony's vintage pre-main. The innocent tone doesn't make you feel stressed is good, and the balance from treble to bass is good, and the tone control response is good. The retro-futuristic design is also impressive. *This unit does not use a speaker protection relay, so it may make an abnormal noise when the power is turned on and off, but this is a specification. There is a scratch on the cabinet on the exterior (Sasaki Shota)
Maintenance information: 2024.6.13 maintained (board repair due to poor contact within the TONE board, 4 transistors with PHONO noise were replaced, adjusted semi-fixed VR due to unstable idling voltage, contact repair due to poor contact with each push SW contact, and volume slide VR disassembly and cleaning were performed.)
Accessories: none
Main specifications: 35W+35W (8Ω) input sensitivity/impedance Phono 1.2mV/47kΩ Phono 2 system Tuner 1 system AUX 2 system Tape 2 system AC100V, 50 Hz/60 Hz 100 W 400 x H149 x D316mm weight 9.8 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/6/8 sales price 298,000 yen Maintained! A player equipped with a genuine SME 3010R black model for the 100th anniversary Centennial. This is a famous machine that perfectly matches the high sense of resolution unique to SMEs and the individuality of the supple TD126. The quietness of the floating suspension and belt drive and the analog sound with a low center of gravity are excellent words. The relatively compact housing, ease of use, and good balance in terms of sound quality are also attractive. The exterior has dullness and scratches. Serial 66529 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (replaced due to poor contact with the display lamp. Servo circuit electrolytic capacitor replacement. Cleaning between armweights and shafts. Clean the arm clamp area. Loosen and re-tighten the upper arm screws. Strobe mirror cleaning. Elevation belt and turntable belt replacement The PU cord ground wire has been repaired. (Arm operation, voice check OK)
Accessories: instruction manual, phono cable
Main specifications: belt drive, 33/45/78 rotation compatible, W505 x H170 x D395 mm, 14 kg, arm part: static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), adjustable needle pressure range 0 to 5 g
This is the L-type TH-9708, which is the highest peak step-up transformer along with cotters. The detailed, glossy, and deep sound is the true essence of analog playback. The degree is generally good. Serial 890167 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: primary impedance: LOW 3 ohms size W16.5 x H12 x D10 cm dead weight 2.75 kg
Line matching transformer pair sale primary side: 600 Ω CT (150 split) secondary side: 20 kΩ CT (5 k split) W77 x H71 x D43 mm approx. 0.55 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Set of 4 insulators It is effective for player and rack feet. There are scratches and bumps on the exterior (Tamura Eiji)
Accessories: none
Main specifications: height 19 mm x diameter 95 mm weight 109 g
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel the changes greatly due to the power cable, and the exterior is dull. ※The wire is hard and the cable is slightly difficult to handle (Satoshi Yonejima)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel the changes greatly due to the power cable, and the exterior is dull. ※The wire is hard and the cable is slightly difficult to handle (Satoshi Yonejima)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
A compact A4 size headphone amplifier with built-in D/A converter. The DAC chip is equipped with 2 of the latest Asahi Kasei Electronics' DAC VERITA AK4490, and is compatible with native playback in DSD 11.2 MHz and PCM 384 kHz/32 bit formats! Using a high-precision volume that can be set in 256 steps, it can also be used as a higher quality preamp. The exterior is dull. Serial 1860010 (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: PCM data sampling frequency 32/44.1/48/88.2/96/176.4/192kHz DSD data sampling frequency 2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) USB input sampling frequency 32/44.1/48/88.2/96/176.4/192/352.8/384 KHz W290 × H84.5 × D248.7mm 4.2kg
1.5 m pair of balanced cables ULTRA series OFHC, a unique cable with a natural, smooth tone and a high sense of sound pressure. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Mid-size model of 1.0 m XLO digital XLR cable. A unique cable that is smooth and has a high texture in the mid to high range, yet also has a high sense of sound pressure. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Yonejima Satoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: No accessories
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
The disposal price has been reduced. Member prices are not applicable. 2024/6/8 sales price 498,000 yen This is AYRE's ambitious work that takes advantage of the characteristics of FETs and uses a perfectly balanced circuit configuration from input to output. A non-feedback type complementary circuit that combines the input stage of a cascade connection with the output stage of the source follower is used. You can listen to a sound with a natural feel that makes you feel the expanse of space. The exterior has scratches and dirt on the front, and there is a feeling of use such as scratches overall (Mizusaki Ryo)
Maintenance information: 2024.6.8 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) 100V specification W460 × H180 × D460 mm 43 kg
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 1000061118 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Use the original 24K gold-plated plug with a 1.5m pair of RCA cables, polished by hand and nickel plated. The characters are highly transparent and sharp. It greatly enhances the freshness of the sound. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
The 1.5m PSE standard power cable is a full-tech FI-25 plug, and the sheath uses new materials that respond to environmental issues in 2006. The mid to low range with horsepower is recommended for jazz and rock fans. The exterior is good (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
Digital XLR cable equipped with a 1.2m hyperdigital isolator. The separation is good, and the sound quality is clean and sharp, typical of Saek. The exterior has dullness and disappearing characters (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box,
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box, characteristic table
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g