Maintained by the manufacturer! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that lets you hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. There is friction on the volume, but there are no other noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.6.19 Maintained by the manufacturer (microcomputer and other ICs were replaced due to poor logic circuit operation. Replacing deteriorated electrolytic capacitors. Re-adjust the DC offset voltage on the output amplifier. (No external cleaning, each function, performance check OK, pressure resistance, safety check OK)
Accessories: copy of instruction manual
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
Maintained by the manufacturer! A popular DENON control amplifier for its excellent phono equalizer. MC head amplifiers are famous for their quality, and they fully draw out the amount of information in the cartridge. It's a neat sound typical of a domestic amplifier with clear yet solid mid-range sound. There is a small dent on the top of the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.19 manufacturer maintained (main volume, disassembly cleaning and slider deformation correction, replacement balance volume due to MAX/MIN stopper cushion damage, mechanical switches (PRESET/SUBSONIC/MUTING/TAPE/PHONO impedance), disassembly cleaning electrolytic capacitors, 20% capacity change parts and parts with increased ESR values, likely to deteriorate in the future Replace only parts (as original as possible) output relay, measure contact resistance with single operation, confirm no abnormalities, check internal AC line, rewiring, solder surface check, etc.
Internal power supply voltage (73V) readjustment (originally within error range), output DC offset confirmation (OV) internal cleaning volume knobs, cleaning and special waxed AC cable, plug cleaning, RCA terminal cleaning)
Accessories: original box, copy of instruction manual
Main specifications: CR equalizer with 3 PHONO inputs MC head amplifier W455 x H132 x D357 mm 10.5 kg
Maintained! Comes with a cabinet, genuine Electri AC 100V specification. The Macintosh 7000 series stereo power amplifier was announced to coincide with the advent of the CD era. The thick and gorgeous sound typical of the company is attractive. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 maintenance completed (POWER, meter SW internal adhesion reinforcement, power stage Tr check, pattern re-soldering, CR check in the drawer board, connector cleaning, meter logo lamp, C replacement in the power supply board, each SW.VO l. Cleaning, offset, bias adjustment, operation check, panel folding correction.)
Accessories: instruction manual
Main specifications: 270W+270W power guard circuit equipped with frequency characteristics 20 to 20 kHz damping factor 30 W 443 x H240 x D400 mm 37.2 kg
The price has been drastically reduced! 2024/6/16 sales price 698,000 yen piano black color Equipped with a diamond tweeter common to the 800 series, network parts, and an FST mid-range similar to the higher-level models. Although it is the same size as the 804S, the specs have been greatly improved, and it can be said that it is a completely new model. It is a speaker that is delicate, has high resolution, and extremely high sound quality with a sense of SN, has a large enough space to cover everything from high volume to low volume, and can accept all kinds of music. There is a slight feeling of use, and corrosion can be seen on the spikes. Also, there is stickiness due to deterioration of the bass reflex port paint. Serial 0007167/0007168 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: instruction manual, saran net, jumper cable, rubber feet, spikes
Main specifications: 3-way, 4-speaker bass reflex system, 8 ohms, W238 x H1020 x D351 mm, 27 kg
Maintained! Accuphase first generation power amplifier. Unlike today's company's tone, the wild sound with a strong punch is attractive. It goes well with jazz and rock. The exterior has line marks and dullness. Serial L6T748 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (input volume, output relay, semi-fixed VR, etc. replaced due to foot rattling, etc., replacement, etc., switch cleaning card, edge contact cleaning, solder correction, wiring restyling. Bias and offset check output voice check internal cleaning. Note: The MAIN&REMOTE1 speakers are connected in series. (There is no sound unless both speakers are connected)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 150 W/ch frequency characteristics 20 Hz to 20,000 Hz W445 × H152 × D355 mm 25 kg
Cabinet replaced with aurora sound, manufacturer maintained! MM/MC phono equalizer from a handmade amplifier workshop. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J13104 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 manufacturer maintained (LED left and right replacement. Replace it with a new pink color. DC offset readjustment for amplifier section, voltage check for each part. (MUTE SW readjustment, measurement and overhaul of each part.)
Accessories: instruction manual, power cord, connection cord
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
※1 sheet only. Perfect for column-type tall boy speakers or bookshelf speakers placed on a stand. Even though the whole thing adheres closely to the floor, the angled edge allows it to spread throughout the room without stopping the sound with the board (Asaine Satoshi Law)
Accessories: none
Main specifications: laminated bamboo, 3 layers, size W330 x H20 x D 380 mm, weight 1.4 kg
The price has been reduced. 2024/6/11 sales price 298,000 yen Internal dismantling and full maintenance from all checks to transistor and capacitor replacement! It's an amplifier similar to the SE400S, but the output has gone up from 40W+40W to 60W+60W, and the sound quality with excellent extrusion and sharpness has revived the sound of the good old days. In addition to the exterior and input terminals being replaced, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (all internal dismantling checks, L/R co-power stage Tr negative side characteristic defect, Lch driver Tr characteristic failure → replacement, in-base bypass C · power supply C broken → replacement, offset VOL contact failure → polishing, check)
Accessories: Power cable (external product)
Main specifications: output bandwidth 3 to 20,000 Hz, 90 dB SNR power supply 100V, 50/60 Hz, power consumption 200W, output 60 W+60 W, W385 x H125 x D93 mm
Manufacturer maintenance, including pickup replacement, is being carried out in 2022. A belt drive CD player equipped with a 24-bit fully balanced module DAC. This player is popular for its thick sound quality unique to belt drives and a natural tone with no sense of emphasis. You can enjoy vocals and classical music in high quality. You can see a feeling of use on the exterior, scratches on the top plate, marks, dirt, dullness, scuffs, etc. on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.1.13 maintained (spindle bell pick up replacement Assy shaft dismantling, cleaning, grease up inspection disc, confirm regeneration operation)
Accessories: stabilizer, replacement remote control
Main specifications: belt drive type CD player CD-R compatible audio output: XLR balanced RCA unbalanced digital output: coaxial (RCA) optical (optical) AES/EBU (XLR) W435 x H98 x D296 mm 10 kg
The price has been reduced! 2024/6/11 sales price 69,800 yen ※Currently sold. Aiwa's DSD DAC. A/D converter and D/A converter set. It is possible to reproduce DSD 1-bit 64fs signals in SACD format. Even with analog input from compressed sound sources such as MP3s, the sense of localization, sound field, and luster of sound are improved. Serial D101211111 WD01210911 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
Accessories: power adapter, HMDI connection cable, instruction manual
Main specifications: AX-D1: DSD1 bit/64 fs playback frequency band 20 Hz to 100 kHz (+0/-3 dB) dynamic range 102 dB or more, SNR ratio 102 dB or more at 1 kHz, 107 dB or more at 20 kHz channel separation 100 dB or more size W250 x D170 x H50 mm weight 1.5 kg AX-WD: LPCM192 kHz/24 bit/128 fs DSD1 bit/ 64fs (DSD64 mode, 2.8224MHz) size W250 x D170 x H50 mm weight 1.6 kg
The price has been reduced! 2024/6/14 sales price 39,800 yen Maintained in 2019/12! An amplifier with excellent cost performance. It sounds great with a well-contoured sound at an affordable price. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior has scuffs on the sides. Serial 7117300736 (Tomonori Asaine)
Maintenance information: 2024.6.9 operation confirmed
2019.12.8 Maintained (main board soldered, adjustment relay replaced)
Accessories: Remote control instruction manual copy power cable
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz dimensions W434 x H134 x D407 mm weight 14.6 kg
The disposal price has been reduced (member discounts are not applicable). 2024/6/10 sales price 448,000 yen Maintained! Comes with original box Levinson's long-selling prime amplifier. A dual monaural configuration that is thoroughly packed into one chassis while keeping the design concept of separation intact. You can be satisfied with all music genres with quality that easily surpasses separate amplifiers. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Sasaki Shota)
Maintenance information: 2024.3.3 Maintained (replace deteriorated parts. DC voltage/DC offset voltage/idling current/other inspection adjustments)
Accessories: original box, remote control, manual, power cable (non-genuine)
Main specifications: 100W+100W (8Ω) XLR input x 2 system RCA input x 3 system gain adjustable (preamp section 0/6/12 dB) W445 x H162 x D483 mm 29.5 kg
2023 Maintained! One of the best masterpieces of pre-main amplifiers in SANSUI history. It's powerful, with a sense of extrusion, and makes you hear a stretchy and expansive sound. The deep sinking low frequencies and the good tone unique to MOS are some of the best finished premains in SANSUI history. As for the exterior, there are scuffs and line scratches on the top plate. Serial 606068517 (Yonejima Satoshi)
Maintenance information: 2023.6.23 maintained (power supply circuit part rectifier diode replacement, transistor, resistor exchange, indicator lamp replacement, protector part transistor replacement, output relay, headphone relay replacement, power amplifier part solder repair, rec selector, power amplifier direct switch disassembly, polishing grease application, each volume, switch cleaning, internal inspection and cleaning, SP terminal correction, adjustment, operation confirmation. (*There is some hardness on the SP terminal)
Accessories: instruction manual
Main specifications: effective output 150W+150W (6Ω) 110W+110W (8Ω) W450 × H176 × D486mm 32.1 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. On the exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen, such as dullness and scuffs on the entire surface (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
Maintained! 117V specification. A masterpiece model from the golden age of Macintosh. With an output of 50W, the modest yet rich, and flavourful sound is attractive. You can enjoy the rich and realistic sound in combination with a pri of the same age. The exterior is dull and has small scratches. Serial AT2722 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (each indicator lamp replaced. Electrolytic capacitor replacement. Input volume and switch cleaning. Bias and offset checks. Output audio check)
Accessories: copy of instruction manual
Main specifications: 117V specification output 50W+50W load impedance 4, 8, 16 ohm input sensitivity 0.5V full stage direct connection pure complementary output transformer W406 x H138 x D330 mm 22.7 kg
A compact and convenient receiver. With a configuration of SACD/CD player+FM/AM radio+PHONO terminal (with MM/MC compatible phono equalizer), you can easily build a compact, and good-sounding system. You can see a feeling of use, such as the exterior, dullness, and noticeable scuffs on the sides (Kobayashi Hitoshi)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control, power cord
Main specifications: rated output 37.5W+37.5W compatible speaker impedance 4Ω to 16Ω frequency characteristics 10Hz to 40kHz W300 x H110 x D341 mm 8 kg
Celestion's classic bookshelf speaker. Compared to current bookshelf speakers, the range is slightly narrower, but the mild tone with a core in the mid-range is excellent. It intensely entertains me with music. Exterior, saran net peeling, writing, dullness, scuffs, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net, spike, spike receiver, instruction manual
Main specifications: 2 way 2 speakers sealed bookshelf impedance 8 ohms output sound pressure level W200 × H370 × D255 mm 8.8 kg
The price has been drastically reduced! 2024/6/5 sales price 328,000 yen Maintained! Macintosh's first power amplifier with a balanced circuit configuration. Resolution and transparency have been added to the traditional rich, extruded tone. The blue meter, which can be said to be synonymous, is alive and well, and has plenty of presence, pleasing not only the ears but also the eyes. The exterior is dull and has small scratches. Serial JGC1730 (Yonejima Satoshi)
Maintenance information: 2024.6.5 Maintained (volume exchange (both channels) due to left channel volume shaft bending and poor contact points) lamp, electrolytic capacitor, etc. due to deterioration, acrylic removal cleaning, solder correction, connector cleaning, panel peeling correction (character area, etc. are not allowed) switch cleaning. Bias and offset check output audio check)
Accessories: copy of instruction manual
Main specifications: 300W+300W (2/4/8Ω), 600W during MONO (2/4/8Ω) W445 x H196 x D420 mm 35 kg
Maintained! A power amplifier from the USA Marantz era. The compact yet powerful American sound is attractive. It works great with speakers that make a lot of noise, such as JBL, and you can enjoy an exciting sound that is clear. Exterior, paint deterioration, dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (lamp replacement (replacement), power stage Tr check, C replacement, DC offset, bias adjustment, relay contact cleaning, operation check)
Accessories: none
Main specifications: 80W+80W (8Ω) damping factor 30 (8Ω) power meter (sensitivity can be switched in 3 levels) mounted dimensions W358 x H120 x D273 mm weight 11 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/5 sales price 148,000 yen Maintenance completed! Scarce! Mcintosh tubular 2ch mono FM/AM tuner. The band was changed from the US version to domestic use, and the deteriorated vacuum tubes, capacitors, etc. were replaced, and they were restored brilliantly. I take my hat off to the persuasive power of the tuning, and the super rich, sexy sound quality typical of McKinn, even just listening to the narration. In addition to paint peeling on the exterior and metal frame, you can also see a feeling of use over time, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintained (for US use → band change/AC100 → 117V step-up transformer added AC code exchange/block capacitor 50 μF x 4 replacement/3 electrolytic capacitors 20 μF, etc. · 5 ceramic capacitors 15 pF and others added or replaced · 2 vacuum tubes 6Be6 and 6AB4 replacements (both offset with supply 6V4) · AM antenna line 5m added · vacuum tube 6U8 and 6AB4 (2 6AU6 exchanges, IF/RF readjustment ※ operation checked with other AC117V)
Accessories: step-up transformer
Main specifications: Vacuum tubes used EF94/6AUC, 6BN6, 6BJ6 x 2, 6BA6, 6B4, 6B07A, 12AU7A, 6BQ7A, 6AL5, 6BU8, 12AU7R, etc., all 18 others W374 x H120 x D304 mm 7.7 kg
The price has been drastically reduced. 2024/6/4 sales price 698,000 yen Oba Shoji genuine 2nd generation mono amplifier equipped with an ultra-high speed switching power supply. The suppleness, delicacy, and strength are all first-class products. First of all, I was surprised by the smooth, cored sound. The driving power is also excellent, and it has the ability to easily drive high-class speakers. There are 2 noticeable paint peeling spots on the top plate and light scuffs and minor scratches in places (Sasaki Shota)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, power cable, connection cable
Main specifications: 200W+200W (8Ω) 350W+350W (4Ω) main body W445 × H97 × D335 mm 13.5 kg/unit power supply unit W445 × H97 × D319 mm 13.7 kg/unit
The price has been reduced. 2024/6/4 sales price 18,000 yen*Inexpensive due to lack of accessories such as spikes. A stand designed for the company's 705 and CM1 bookshelf speakers. It will also fit similar sized third-party speakers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate size 160 x 220 mm W278 x H595 x D368 mm 10 kg/bottle
Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 598,000 yen Manufacturer maintained! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that lets you hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
Accessories: none
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
The price has been drastically reduced! 2024/5/31 sales price 178,000 yen Maintained! Second generation model of the famous P-300 series. The sharp, sharp, and exhilarating sound is alive and well. It also goes well with JBL, etc., and makes a powerful sound. You can enjoy rough sounds that cannot be experienced with current products. There are scratches and scratches on the exterior. Serial B8Y695 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 Maintained (output relays, film capacitors, electrolytic capacitors, semi-fixed VR, etc. replaced. Fixed because the switch is stuck. ATT disassembly and cleaning. SP switch polishing cleaning. Solder correction. Card edge contact cleaning. Increase and tighten the output terminals. ※Bias and offset check adjustment. Output audio check. (*When using MAIN & REMOTE1 speakers, be sure to connect both speakers.)
Accessories: power cord
Main specifications: 150W+150W (8Ω) W445×H160×D355mm 25kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/26 sales price 348,000 yen The current ELAC speakers have arrived! It firmly follows the merits of ELAC up until now, and shines with a higher degree of perfection than ever before. With an expanse that doesn't make you feel the presence of the speaker, and the sound is delicate and bright, it is a practical speaker regardless of genre. There is a small dent in the lower woofer on one side. Serial 31800E000053/31800E000056 (Takasaki Atsushi)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: instruction manual, jumper, spike holder, original box (cushioning material partially broken)
Main specifications: 2.5-way bass reflex type crossover frequency 450/2400 Hz frequency characteristics 30 to 50,000 Hz efficiency 88 dB recommended amplifier power 40 to 300 W rated input 130 W impedance 4 ohms W229 ✕ H1,000 x D266 mm 19.1 kg
The price has been drastically reduced. 2024/5/17 sales price 378,000 yen The flagship model of a Macintosh power amplifier with silver panel specifications. It is characterized by its strong, dense sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches, dullness, and discoloration in places (Kojima Yosuke)
Maintenance information: Maintained on 2020.8.26 (2 input volumes, 4 semi-fixed volumes, 2 RCA plugs, 12 lamps, 8 electrolytic capacitors, replacement input mode switch disassembly cleaning, card edge cleaning, soldering, bias and offset check, output sound check)
(*The interior and exterior have been cleaned.)
Accessories: power cable
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
The price has been reduced. 2024/5/9 sales price 49,800 yen Woofer edge softening treatment! A classic model that uses carbon graphite on woofer cone paper. The high and middle ranges have a core yet are glossy, and the low frequencies are tight. It is a well-balanced speaker and is suitable for a wide range of genres. In particular, the vocals in combination with a vacuum tube amplifier are excellent. You can enjoy the enchanting diatone sound. As for the exterior, the frame has rust, scuffs, dullness, etc., and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.7 maintenance (exterior cleaning, edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed impedance 6 ohms, W380 x H680 x D325 mm, 21 kg
The price has been drastically reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
This is a replacement needle compatible with Hitachi MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. There is a feeling of use such as dullness. Serial 3121 (Takasaki Atsushi)
Maintenance information: 2024.3.22 maintained (INPUT DIN4P and AC connector replacement, DIN4P-RCA x 2 (1m) creation, internal check, DC cut C, coupling C replacement, RCH offset VOL exchange, constant change in constant voltage circuit)
Accessories: copy of manual, power cord, connection cord
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
This is a replacement needle for Hitachi. Compatible with MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Genuine Hitachi, genuine replacement needle for IFS-240 The cantilever is slightly turned to the left. Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Genuine Hitachi, genuine replacement needle for IFS-240 Operation has not been confirmed since there is no target cartridge (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to Hitachi DS-ST26 Replacement needles for VFS-260 and VFS-261. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box