Trio 2-way speakers. A sectional horn is used for the high range, and a free edge is used for the low range woofer. It's an inexpensive yet tasteful sound. The particle board of the hakama deteriorates and falls apart in tatters (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net
Main specifications: 2 way 93dB W392 x H753 x D395 mm 20kg
※Since there is no main unit, operation has not been checked. Nagaoka replacement needles. This is a TRIO N-39 compatible product. As for the exterior, the needle tip is slightly to the left (Hiroki Aso)
Maintenance information: 2024.4.7 operation unchecked
Accessories: none
Main specifications: Appropriate needle pressure 1.5g
Pair tube, large beam output tube, 8147 compatible bulb, gray plate for Hi-Fi, with original box (outer box/inner box), has slightly decreased getter for both tubes ※ The pair measures and determines EM values with the measuring machine TC-162 (Kojima Yosuke)
Accessories: original box
The price has been reduced! 2024/6/2 sales price 49,800 yen High power amplifier using a fully balanced Class D amplifier. The high output of 300W and plenty of driving power are attractive. It reproduces PC audio with low distortion and wide range. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord, adapter, original box
Main specifications: 300W×2 (4Ω) 165W×2 (8Ω) W200×D155×H41mm 0,7kg
The price has been reduced! 2024/6/2 sales price 49,800 yen Hi-Res Audio & Hi-Res Audio Wireless Bluetooth 5.1 Compatible DAC Preamp. Equipped with various functions, it is compatible with a wide range of PC audio. Equipped with an AK4499ExDAC, the sound quality of the Bluetooth sound source has been greatly improved. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: PCM 44.1kHz-768kHz/16-bit - 32bit, DSD (native) DSD64-DSD512, DSD (DOP) DSD64-DSD256, coaxial/opt-in: PCM 44.1kHz-192kH/16 bit 24-bit W347xD276xH10.2mm 1.56 kg
※1 bottle only. TOA large metal radial horn. In terms of sound quality, it has a narrower impression than Altec's sectional horn 311, but it has a bright sound with a sense of overhang unique to radial horns. *The diameter of the mounting hole seems to be slightly smaller than ALTEC, so there is a possibility that ALTEC's 1.5-inch drivers will not fit depending on individual differences. Overall, there are wounds, dullness, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: cross 500 Hz or more, horizontal 90 degrees, vertical 40 degrees, throat diameter 35.5 mm, compatible driver HFD-651, width 720 mm, height 220 mm, depth 580 mm, 10.9 kg
Maintained! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/28 sales price 118,000 yen including new dust cover created and maintained! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
The price has been reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 operation confirmed
Accessories: power cord, connection cord, EP adapter, subway, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
Direct drive record player equipped with the Orthophone 2M RED as standard. The built-in PHONO equalizer allows direct line connection to an audio device (conventional PHONO input connection is also possible with the back switch). It is also equipped with a simple auto lift-up function (sometimes not compatible depending on the width of the inner groove), so beginners and advanced users can easily enjoy the subsystem deeply. There is a black spot on the start/stop switch (Kojima Yosuke)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: manual, power cable, connection cable, original box, genuine shell, cartridge (2M RED)
Main specifications: Direct drive universal S-shaped tone arm, static balance arm, effective length 230 mm, overhang 15 mm, applicable cartridge, 14.3 to 20.7 g (including headshell) when using auxiliary weights, 18.7 to 25.1 g (including headshell) output terminal/PHONO terminal x 1, PHONO ground terminal x 1, LINE output terminal x 1, LINE output terminal x 1, LINE output terminal x 1, W453 x H169 x D372mm 9.9kg
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
This is a replacement needle for the national cartridge EPC-05STA. Unopened and unchecked (Mizushima Itsuro)
Maintenance information: 2024.3.8 unchecked
Accessories: original box
The price has been reduced! 2024/6/1 sales price 118,000 yen A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
Taok's popular 4-tier audio rack. Strong construction typical of TAOC. It tightens the tone of the audio system. The length of the pole has been changed from the original. Scratches are conspicuous (Daiki Goto)
Accessories: instruction manual
Main specifications: W600 x H920 x D520 pole length 350, 250, 200 mm weight 21 kg (actual measurement)
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The price has been reduced! 2024/4/21 sales price 4,500 yen This is a genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box
The price has been drastically reduced. 2024/5/12 sales price 99,800 yen It has a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it regardless of genre even with 2CH as it is. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: zipper cross grill
Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Both the interior and exterior have been fully restored and refreshed! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. It is beautiful due to exterior repairs (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting. Saran net replacement/frame repair/reinforcement. Unit maintenance: low range/edge exchange, magnetic circuit gap cleaning/center adjustment, high pass/magnetic circuit rust removal/gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
※Only 1 network coil attenuator Orient Hi-B cut core attenuation -1 to -20 dB (1 dB interval) maximum input 300 W usage frequency 200 Hz or more, line diameter 1.2 mm, W85 x H72 x D75 mm, approx. 1.1 kg/piece There is distortion in the washer part (Kojima Yosuke)
Accessories: none
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
The price has been drastically reduced. 2024/4/18 sales price 89,800 yen TANGO input transformer, line transformer using NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
Input transformer pair sale primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W50 × H70 × D57 mm 0.75 kg/piece (actual measurement, not including protrusions) The badge is discolored, and there are scratches in places (Kojima Yosuke)
Accessories: specifications
Unused item! (Opened to confirm continuity) Power transformer primary: 100-105-110V secondary: 22-25V/AC5.5A x 2 (Bridge DC3.2A), 5.5V/AC1A x 2 W120 x H140 x D100mm 5.5 kg original box, with instructions, fixed stay, and fixing nut (Kojima Yosuke)
Accessories: original box, manual, fixed stay, fixed nut
Output transformer sale push pull output 40W primary: 5KΩ secondary: 4-8-16Ω W84 x H119 x D79 mm 2.3 kg/piece No TANGO badge, there are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Pair tube, metal, brown base, made in America, measured value 66/64 (rejected value 44) with original box (some written), sticker is attached to the base part, and there is a getter burn ※ The pair was determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Replacement needle for YAMAHA cartridge CG-8000 Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for YAMAHA cartridge CG-6800 Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: unconfirmed
Accessories: original box
Compatible needles for COLUMBIA DSN-68, Toshiba N-36C, TRIO N-65, ONKYO DN-67ST, SONY ND-148G, AIWA AN-F10 It has not been opened, and operation has not been confirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for YAMAHA cartridge CG-6600S. Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for TRIO/KENWOOD cartridge V-39MKIII Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
N-4500/2 compatible Yamaha CG-4500/2 replacement needle Operation has not been confirmed since there is no main unit (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for TRIO and KENWOOD V-36 cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needles for T-30 and V-30 TRIO KENWOOD cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box