The disposal price has been reduced! (Member discounts are not applicable) 2024/5/23 sales price 1,380,000 yen*Woofer saran net is out of stock. Limited edition of 500 units commemorating the 40th anniversary of B&W's founding. Not only are diamond tweeters that reproduce extremely clear, natural high frequencies, but their ability to reproduce low frequencies with a sense of volume is also attractive. The low range is well balanced with the mid to high range, and the localization is clear, and it is expressed with a rich sense of color, especially in classical music. As for the exterior, there is a feeling of use such as a line scratch or dullness on the back. Serial 0002291 0002292 (Asaine Tomoho)
Maintenance information: 2022.12.14 manufacturer maintained (tweeter replacement operation test)
Accessories: spike foot jumper sponge hex wrench
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz 8 ohms crossover frequency 3.8 kHz W230 x H930 x D375 mm 25 kg
The price has been drastically reduced. 2024/6/2 sales price 278,000 yen Maintained! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (power amplifier direct, etc.) switch disassembly polishing grease application (loudness, subsonic, muting, processor, reckout, MM/MC switch, input selector, source direct, tape), output relay replacement, power amplifier section, power supply transistor, adjustment volume replacement, solder repair, volume, switch cleaning, DC, bias adjustment , running test)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
This model is limited to 200 units equipped with the highly acclaimed Philips 1-beam swingarm mechanism CDM9PRO. While inheriting the soft and thick sound of CD-23, the straightforward, flat, and well-balanced sound quality is attractive. As for the exterior, there is paint peeling around the legs. Serial MZ009644080005 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: Philips 1 beam swing arm mechanism with CDM9PRO, 1 input/output terminal/digital coaxial output system, 1 digital optical output system, 1 analog unbalanced output system, 1 digital coaxial input system, 1 digital optical input system, dimensions W250 x H124 x D281 mm, weight 6.3 kg
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
Maintained! Sigma cable included! The highest-grade varicon tuner at the time, which is still highly popular! It uses a high-precision 7-frequency linear varicon, and you are amazed at how vivid it is as if you were listening to the studio sound as it is. Please experience sound quality that cannot be enjoyed with a digital synthesizer tuner, which combines both good sensitivity and sound quality. There are scratches and scratches on the exterior. Serial 47K10029 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (comprehensive inspection, adjustment, and correction of modified parts of the board. Replace deteriorated LEDs and add current limiting resistors and diodes. Fixing and repairing damaged parts of the board. (Overall adjustment of the RF system and MPX system)
Accessories: sigma cable, simple FM antenna
Main specifications: FM dedicated tuner, 7-speed varicon, W480 x H147 x D423 mm, 12.4 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 148,000 yen Speaker that has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
The price has been reduced. 2024/5/20 sales price 30,000 yen A FOSTEX HA21 throat adapter is set on a self-made horn with a size that imitates the FOSTEX H320. If you've been looking for this size, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: throat diameter 100 mm pitch 4 holes 60 mm 3 holes 50 mm overall W635 x H110 x D 455 mm kg (actual measurement)
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
*Currently sold, this is a limited edition model commemorating the 15th anniversary of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. The exterior is dull and dirty. The bottom has been replaced with felt from rubber feet (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
Since there are no connectable devices, it has not been checked. D-terminal cable The highest-grade D-terminal cable using a 1.5m silver-coated OFC conductor is ideal for transmitting high image quality images for progressive, high-definition devices, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
common needle. Compatible cartridges include Toshiba N-72D, TRIO N-64, Mitsubishi 3D-54M AKAI RS-77, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Compatible with Mitsubishi 3D-44M This is a replacement needle compatible with MAG-44. Unopened. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
※Shipping service. No. 71 Special Feature = New Wave Speakers Building a New Generation of Quality Audio/Answering the Audio Conundrum You Want to Know the Most Right Now (top) /'84 Best Buy Component by Readers' Vote/ Introducing a Tubular EQ Amplifier from Altphone /Published on 1984.7.15. Published models: JADIS/JP80, JA30, JA200 MARANTZ/CD84 PIONEER/P-D90 YAMAHA/CD2 REVOX/B225 DENNSEN/JC80 ACOUSTAT/TNT120, TNP FOSTEX/GZ2001 BEVERIDGE/SYSTEM 5 INFINITY/RS2A LUXMAN/MB300 PIONEER/A150D AR/AR TURNTABLE SPEX/SDX3000, SDT3000 MICRO/MT500, MT1000L/H AKG/P100 LIMITED The photo is a sample, so the actual item may be broken, have marks, etc.
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
The HDMI cable is a 3.0 m high-grade connector, and a nylon mesh cable is used for the outer shell. It is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
The 0.5 m HDMI cable connector is made of high-grade aluminum material, and the outer skin of the cable uses a slim nylon mesh cable that can be wired neatly and is less burdensome when bending. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: case