※It is inexpensive because there are many scratches on the whole. Although it is small, it is an attractive car with a low range and medium to high range with a solid core in the middle. Bi-wire compatible It is compatible with a wide range of genres, and is recommended not only for pure audio but also for surround sound (Ryo Mizusaki)
Maintenance information: 2024.6.1 sweep test is good
Accessories: nothing
Main specifications: Bi-wiring compatible anti-magnetic design impedance 6 ohms playback frequency band 33 Hz to 45 kHz output sound pressure level 88 dB dimensions W194 x H326 x D318 mm weight 8.4 kg
Maintained! The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. The extrusion is strong and goes great with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches and stains on the exterior, and rust can be seen on the top plate and back panel (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (transistor in driver board, LDR, capacitor deterioration, GAIN, VOL noise, meter board capacitor deterioration, power supply board capacitor deterioration, meter lamp, display lamp deterioration → replacement. Meter dismantling terminal lead wire soldering treatment, MODE SW dismantling cleaning, operation check, power stage check OK)
Accessories: power cord, copy of instruction manual
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
Maintained! An eye-catching diamond-tone power amplifier with a rugged design. The extrusion of the mid-range is clear and the sound is slightly firm, but the sound is good, so it seems to go well with jazz and rock. There are small scratches and dents on the exterior as a whole (Mizusaki Ryo)
Maintenance information: 2024.6.1 Maintained (replacement of deteriorated transistors and capacitors in each circuit. Input volume and output relay contact correction. Electric circuit adjustment)
Accessories: copy of instruction manual
Main specifications: 2 mono construction system 100W+100W (8Ω) W425×H170×D285mm 16.5 kg
Rare amplifiers are in stock! Stereo power amplifier imported directly from Denmark. It is equipped with a B&O ICEPower200ASC that is also mounted on the JEFF ROWLAND Model 102. You can enjoy straight, high-resolution sound. The exterior has small dents, bumps, and scratches on the top plate (Mizusaki Ryo)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: power cord
Main specifications: 100W+100W (8Ω) impedance 3-16Ω W215 × H60 × D350 mm 3.5 kg
The battery has been replaced! AC & DC operation is possible. Technics slim control amplifier. This car has few quirks, and its straightforward, natural tone is impressive. It is a thin, space-saving model, and is recommended as a separate introductory machine. There are multiple scratches on the top plate on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (battery created and installed, encoder etc. cleaned, solder corrected, charging operation checked, AC and DC operation checked, audio checked for each input/output)
Accessories: remote control, instruction manual, power cord
Main specifications: PHONO input (MM/MC) equipped with 2 output systems W430 × H70 × D307 mm 3.3 kg
※There is no problem with the sound output operation, but the LCD is dark and there are places where the characters disappear, so it is inexpensive. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. The exterior has noticeable scratches on the top plate, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cord
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
Maintained! The culmination of Paragon, late model D44000WXA. The design created by Arnold Wolff is of course undisputed, but Paragon is wonderfully well thought out when it comes to sound quality, and it transcends the line for audiophiles. The combination of the reverberation of each unit and the late enclosure is the final form Paragon aims for. The beautiful way of making a plump, floating sound is unique (Yamato Yuki)
Maintenance information: 2024.5.31 maintained (exterior cleaning/repair/gloss adjustment, horn paint black paint woofer back grill repair driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement) ATT cleaning unit detachable)
Accessories: none
Main specifications: D44000WXA low range 38cm cone type LE15H+ medium range horn type 376+H5038p+ high range horn type tweeter 075 network LX5+N7000 crossover 500Hz/7000 Hz impedance 8Ω output sound pressure level 96dB allowable input 125W size W2640 x H902 x D740 mm weight approx. 300 kg
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
Pair tube Russian reprint model lot: 1903/1903 measured value 52/50 (rejected value 44) side getters with original box have been reduced ※Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Pair tube Russian reprint model lot: 1903/1902 measured value 54/48 (rejected value 44) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
The pair tube is thought to be made by TESLA due to its 6CA7 compatible ball brown base double ring getter structure. Measured value 50/48 (rejected value 30) There is a getter burn with a white box*The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube, white base, made in Russia, measured value 84/76, rejected value 58) with replacement box ※Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
※Only 1 bottle Sun Valley Sorting Ball Direct Heat Triode, Brown Base, Gold Foot, Made in China, Measured Value 66 (Rejected Value 58) with white box*Measured values are GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: white box
Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
Sold 1 bottle ECC82/12AU7 compatible ball, military tube, made in England, measured value 98 (rejected value 56) with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Sold 1 bottle ECC82/12AU7 compatible ball, military tube, made in England, measured value 100 (rejected value 56) with original box ※The measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Sold 1 bottle EF86/6267 compatible ball, military high reliability tube mesh measurement value 46 (rejected value 33), seems to be made by GEC due to the structure. Comes with a white box ※The measured values indicate GM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Refreshment maintenance was carried out with attention to detail, such as all exterior painting and driver gap cleaning! You can experience a unique sound that makes you feel a hot breath in the dry sound. This time it's a combination of enclosure 828B, woofer 416-8B, driver 802-8D+511B, and network N501-8A. The outstanding vocal band and the sense of energy of the resonating horn are amazing. The exterior has been beautifully finished due to exterior repairs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/full painting, saran net replacement, horn painting and butyl tape removal work, new horn receiver creation. Woofer maintenance (viscoid adjustment, terminal/vis-cleaning) driver maintenance (magnetic circuit gap cleaning/center adjustment, diaphragm screw replacement/lead disconnection repair) network maintenance (frequency characteristic check, ATT cleaning, terminal/vis-cleaning, butyl tape removal work) unit detachment, new horn stay installation processing, new wiring)
Accessories: none
Main specifications: 2 way 2 speaker unit configuration 802-8D+511b・416-8b・N501-8A・828b Dimensions W760 × H1,375 × D610 mm Weight approx. 74.0 kg
Internal and external maintenance has been applied and brushed up! JBL 40th anniversary model! A reprint model of the L101. You can enjoy the excellent sound unique to horn drivers. It has a good response and is a spacious speaker that can be matched with music of a wide range of ages. The traditional lattice net design is also attractive. There is slight discoloration on the marble (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (exterior repair/polishing/oil finish
Front and rear baffles/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. Woofer edge replacement. Driver maintenance (magnetic circuit gap cleaning center adjustment). Network maintenance (frequency characteristic check, ATT cleaning).)
Accessories: lattice
Main specifications: 2 way · 2 speakers · bass reflex system · floor type frequency characteristics 35 Hz to 16,000 Hz directional characteristics (horizontal x vertical) 90 degrees x 40 degrees sound pressure level 92 dB 8 Ω allowable input 150 W crossover frequency 900 Hz enclosure volume 53.5 L W445 x H629 x D320 mm 29.1 kg/book
*One SP terminal is a replacement, so it is inexpensive. It hasn't arrived in a long time. This speaker system inherits the DS-205 design philosophy of making small-aperture woofers sound smoothly with a large capacity enclosure. You can enjoy the soft texture and loud sound. Serial 12502/12517 (Murakoshi Yoichi)
Maintenance information: 2024.5.30 maintenance (exterior cleaning/touch repair, 1 terminal replacement)
Accessories: jumper cable (external product)
Main specifications: 2-way bass reflex type 6.3 ohm 87 dB W360 x H925 x D290 mm 25 kg
The price has been reduced. 2024/5/30 sales price 128,000 yen*It is cheap because it is in poor condition such as being scratched or the saran net peeling. It is tightly packed with a strong sealed enclosure and a high-quality unit, and the sound is moist and calm. If you drive with an amplifier with a strong drive, you can enjoy the dense mid and low frequencies. The exterior has scratches, scratches, and creases. Serial 02093/02092 (Murakoshi Yoichi)
Maintenance information: 2024.5.29 sound output confirmed
Accessories: saran net
Main specifications: impedance 8Ω output sound pressure level 85dB W220 × H390 × D255 mm 15 kg
A rare item. Technics meter unit. 3 modes can be switched. One meter can be used properly for 3 types, making it extremely easy to use. It's a rare gem just for visually enjoying sound (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: meter sensitivity 0 dBm 20 dBm switchable 3 system input switching W450 x H92 x D378 mm weight 5.3 kg
A rare item. Technics meter unit. 3 modes can be switched. One meter can be used properly for 3 types, making it extremely easy to use. It's a rare gem just for visually enjoying the sound. There are scratches and rust (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: meter sensitivity 0 dBm 20 dBm switchable 3 system input switching W450 x H92 x D378 mm weight 5.3 kg
*The woofer edge is deformed, the center cap is dented, there is an ATT crack, and there are footprints on the top plate, etc., so it is inexpensive and is sold as is. A floor-type speaker with a porous metal cone that realizes all-metal in the entire band. From the unit to the enclosure, this is a masterpiece that incorporates technology and cost as if Otto's intention were shown. The rich, natural sound is attractive. The enclosure also has scratches, chipped corners, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers 8Ω 93dB W450 × H910 × D430 mm 51 kg
※Since it is for commercial use and is inexpensive, it will be handed over as is. This is a PA speaker equipped with a 38cm woofer and compression driver. Unique to PA speakers, it is a powerful and straight sounding speaker with excellent response. There is a slight feeling of use, and there is a dent in the grill on one side (Daiki Goto)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: connection cable
Main specifications: 40Hz to 20kHz 8Ω 250W 100dB input terminal speakon W466 x H648 x D386 mm 20.9 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A unique digital amplifier technology “VL Digital” has been introduced to reproduce high-resolution sound more vividly in a PC environment, making it easy to enjoy as a desktop speaker. The color on the top plate has faded and there are dents (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: 40W+40W (4Ω) playback frequency range 50Hz to 100kHz digital IN sampling frequency 32, 44.1, 48, 96, 192 kHz/24 bit size Rch: W169 × H263 × D240 mm Lch: W169 × H263 × D215 mm Weight Rch: 6.4 kg Lch: 4.3 kg
This wooden speaker stand is ideal for small and medium speakers. The height is 44cm, making it easy to adjust the listening point. A hard urethane cushioning material is attached to the 4 corners of the top plate (Oikawa Tetsuji)
Accessories: none
Main specifications: top plate W340 x D245 mm height 440 mm bottom plate W380 x D 340 mm 5 kg
The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: subway, copy of instruction manual, EP adapter
Main specifications: quartz lock direct drive, full manual, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
DENON DL-301/2 case You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W67 x H80 x D41 mm 54.8 g (actual measurement)
*Only the 2ch simple test is inexpensive because the video system has not been checked, and is currently sold. Denon AV amplifier. Please use it to build a theater system. There is unevenness in the brightness of the LCD (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed (2ch simple test only, video system not checked)
Accessories: power cable, remote control, instruction manual, FM/AM antenna
Main specifications: ● Rated output/front: 140W+140W, center: 140W, surround: 140W+140W, surround back: 140W+140W, front height/width: 140W+140W (8Ω, 20Hz to 20kHz, THD 0.05%) W434 x H171 x D414 mm 17.3 kg
※Since it is cheap, it will be handed over as is. DSD compatible network audio player. Equipped with WIFI, the D/A converter is compatible with DSD 5.6 MHz and 192 kHz/32 bit, the same as those used in super audio CD players. It is a model with high cost performance. Recommended for those getting started with network audio. There is a line wound. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: DSD (2.8 MHz/5.6 MHz) AIFF (192 kHz/24 bit) AIFF, WAV, FLAC (192 kHz/24 bit) Apple Lossless (96 kHz/24 bit) wireless LAN standard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n compliant W434 x H73 x D297 mm 2.9 kg
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
*The remote control is out of stock, so it is cheap and is currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. The sound quality is stable in both digital and analog. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) line input 4 phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg
* There are adhesive marks on the main body, the tweeter is dead, etc., so it is inexpensive and is currently sold. If you're a Technics fan, you should try the SB-7000 at least once! It is made with a linear phase design and expresses excellent directivity. Although it is flat and has a wide range, it is highly efficient, so it can handle a full range of genres regardless of the amplifier. The exterior has adhesive marks, dirt, and small scratches. Shipping costs will be estimated separately (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 3-way bass reflex 6Ω 93dB linear phase speaker system W480 x H845 x D410 mm 36 kg
Comes with original box This is the third headphone in the Hifiman sealed series. Inheriting the traditional goodness of the classic model SUNDARA, it has achieved a large sound field that looks like an open type while being sealed. I have the impression that it mellows down from low to high frequencies. It is in good condition with little feeling of use (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: original box, connection cable
Main specifications: sealed type 20Ω 98dB 432g
Fully maintained! 2-way floor speaker with a double woofer and 1 horn. With the benefit of the 2234H woofer, which has a fast response and is highly efficient, I have the impression that it is very easy to sound even though it is a double woofer. Coupled with the excellent penetration of the biladial horn, it develops a very energetic sound stage. The good positioning unique to 2WAY is also a good impression. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama/horn coating, saran net replacement driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, terminal cleaning/screw replacement unit detachment)
2023.12 Edge replaced
Accessories: none
Main specifications: 2 way 3 speaker bass reflex type [unit used] 38cm woofer/2234H x 2 driver/2421A+ biladial horn/2344 frequency characteristics 30Hz-16kHz impedance 8Ω sound pressure level 96dB allowable input 375W crossover frequency 1,000 Hz (30Hz to 1kHz on one side, 100Hz or less on the other) Dimensions W965 x H908 × D515mm weight 114 kg/1 bottle
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
A classic Technics headshell. Aluminum die-cast body with excellent vibration damping properties (Oikawa Tetsuji)
Accessories: screws
Main specifications: Weight 9.2 g
A compact and lightweight flat front biladial horn. It keeps horizontal characteristics constant and is useful for correcting driver characteristics (Daiki Goto)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver, 2426H/J, use minimum frequency of 500 Hz, recommended minimum crossover frequency of 630 Hz, made of high-density polyurethane, W448 x H173 x D 174 mm, 1.4 kg
Sony die-cast aluminum shell. While it is sturdy, it has a smart design and is easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: die-cast aluminum, 10.5g dead weight
The disposal price has been reduced. Member prices are not applicable. 2024/5/27 sales price 248,000 yen maintenance completed! Genuine Electri 7CH high power multi amplifier Power amplifiers featuring high power of 200W each. Not only can it be used for AV surround and multiple amplifiers, but it can also be enjoyed as a normal power amplifier with sufficient driving power. The American sound is straight and has high instantaneous power. The exterior has noticeable line scratches and dullness on the front (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (card edge contact cleaning, excessive reviver cleaning, removal, disassembly, polishing, and resistance value check, mounting solder correction) 2022.11.4 maintenance completed (all amplifier board removal, card edge contact cleaning input and operation mode changeover switch cleaning FAN cleaning bias and offset check. (BTL mode check for each channel RCA and XLR input/output audio check)
Accessories: manual, power cable
Main specifications: each channel 200W/8Ω W440×H144×D483mm 25.4 kg
This is a boost transformer (Type L version) for FR low impedance MC cartridges. There is a sense of clarity, and the clean, straight sound is attractive. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: none
Main specifications: input impedance 3 ohms or less, output impedance 47 to 50 kΩ, W158 x H60 x D120 mm, 2.1 kg
*Since corn paper is coated, it is inexpensive and is currently sold. A 30cm woofer unit attached to representative series from 4311B to 4312MK2. This unit is representative of JBL. It makes me feel the good overhang, which is typical of JBL. How about spares etc. (Oikawa Tetsuji)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: none
Main Specifications: 30cm Woofer Unit Maximum Input: 75W Sound Pressure Level: 89dB Playback Frequency Band: 40 to 3kHz Recommended Cross: ~1.5 kHz Impedance: 8 ohms Diameter 310 x Depth 107 mm 6 kg