Line transformer from Uesugi Laboratory. By sandwiching it between the digital device and the amplifier, the characteristic digital noise that causes listening fatigue is removed. You can expect a change in sound quality that is familiar to the ear. It is possible to switch between 3 types of input impedances. There are scratches on the exterior. Serial 057 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: impedance compatible with 3 RCA input systems 200 ohms: 200 ohms 500 ohms: 500 ohms W175 ✕ H150 ✕ D115mm 2.5 kg
Maintenance such as mechanical ASSY replacement has been completed at Denon! A SACD player with a full aluminum chassis and aluminum tray. Similar to the regular series, the D/A section is also equipped with AL24 processing. The supple sound is pleasant enough to listen to. He's an authentic player who doesn't make you feel the size (Daiki Goto)
Maintenance information: 2024.6.6 Maintained (loading mechanism part, traverse mechanism replaced. Each part was inspected and operation tested.)
Accessories: remote control, instruction manual, power cable
Main specifications: SACD/CD player MP3/WMA file CD playable 1-bit DSD/16-bit linear PCM line output 1 system (RCA), 2 digital output systems (coaxial x 1, optical x 1) W300 x H80 x D310 mm 7 kg
Pair tube, large triode tube, made in America, measured Ip value: 71 mA/71 mA (the best standard IP value for this amplifier is 75 mA) with original box*Sound is checked and plate current values are measured with a test amplifier, and it has been determined that operation is good (Kojima Yosuke)
Accessories: original box
Pair tube large triode tube made in America Actual measured Ip value: 70mA/70mA (the best standard IP value for this amplifier is 75mA) The inside of the tube with the original box is slightly burnt, and there is dirt adhering to the outside of the tube*Sound is checked with a test amplifier, and the plate current value has been measured, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced. Member prices are not applicable. 2024/6/7 sales price 268,000 yen ※It is cheap because it has scratches. Genuine Oba Shoji product. The uncompromising construction is excellent, with an aircraft-grade machined aluminum block chassis. I am amazed at its compactness and beauty. I'm only particular about the expressive power of the silent part, and the way the faint sound disappears is as clear as if you take your breath away. It's true that it makes me lament the warmth of human skin. There are scratches on the front and back of the top plate on the exterior (Ryo Mizusaki)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control, instruction manual, power cord
Main Specifications: Input Terminal Unbalance (RCA) 2 Systems/Balance (XLR) 2 Systems/Bypass, Unbalanced (RCA) 1 System Output Terminal Unbalance (RCA) 1 System/Balance (XLR) 1 System Input Impedance/Unbalance 48kΩ/Balance 48kΩ Dimensions W348 x H75xD191 mm (maximum dimensions) Weight 4.2 kg
A new standard model for the SL-1200 series, inheriting the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There are small scratches and threads on both the body and dust cover on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.7 operation confirmed
Accessories: instruction manual, power cord, RCA cable, earth cable, original box, subway, shell
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
Manufacturer maintained, including traverse mechanism replacement! A long-selling model equipped with a USB-A terminal. Compared to other models in the same class, it is popular for its slightly thicker sound that is pleasant to listen to. Music files can be played directly by connecting to an iPod/iPhone, WMA, MP3, or USB memory with recorded files. There is slight dullness and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.5 manufacturer maintenance (loading motor, loading belt, traverse mechanism replacement. (Inspection of each part, operation, sound test)
Accessories: remote control
Main specifications: audio output terminal/RCA x 1, headphone x 1, digital output/light x 1 W434 x H107 x D273 mm 4.1 kg
Maintained! ※It has been changed to an RCA terminal. Marantz's masterpiece CD player equipped with the Philips swing-arm mechanical CDM-1. The sound is rich, analog-like. It has the same feeling of use as time has passed (Daiki Goto)
Maintenance information: 2024.6.8 maintained (slide motor belt NG → replaced. There is poor thru-hole soldering in the decoder board → all re-soldered. Bypass C NG in other servo boards → replace. ~ CD mechanical turntable motor bearing concave → correction ~ reading check)
Accessories: copy of the manual
Main specifications: Philips swing arm mechanism equipped with CDM-1 14 bit DAC W320 x H90 x D300 mm 7 kg
Digital cable 1.0 m RCA plug This 75 ohm digital cable is ideal for generating clocks such as clock generators, word clock connections for receiving devices, S/PDIF connections to DACs, audio interfaces, DJ devices, etc., and video equipment. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.6.9 continuity confirmed
Accessories: none
Line noise filters. An accessory that thoroughly eliminates transient distortion generated within line cables and improves overall signal-to-noise ratio. Sounds that could not be heard until now appear clearly, and it becomes a dynamic playback sound that stretches and stretches from low to high frequencies (Tamura Eiji)
Maintenance information: 2024.6.9 operation confirmed
Accessories: No accessories
Main specifications: Input side: RCA jack Output side: RCA pin plug
Maintained! Comes with a remote control. A CD player developed to commemorate the 100th anniversary of Philips's founding. The sound is soft and relaxed, and the thickness of the analog-like mid-low range is particularly irresistible. A swing-arm CDM-4 mechanism is used for the mechanism part, and TDA1547 (DAC7) is used for the D/A conversion part to achieve advanced S/N improvements. As for the exterior, there are bald spots and stains on the SW area. MZ019204080075 (Tamura Eiji)
Maintenance information: 2024.6.9 Maintained (both tray slide belt and CD standby motor belt replaced. Other CD mechanisms, drive circuit check, reading check OK, remote control check OK)
Accessories: remote control, lock pin
Main specifications: CDM-4 mechanical DAC7 equipped analog output 2 systems (XLR/RCA) 2 digital output systems (optical/coaxial) W457 x H140 x D359 mm 16.7 kg
RCA cable, 1.0 m pair, uses high-purity silver wire with VariStrand structure. KIMBER KABLE's unique “3-core blade structure” is recommended for those who want to improve sound loss anyway. The strengths and weaknesses are clear, and the presence of each instrument, especially the strings of piano, stringed instruments, etc., stretches very nicely. The spread of the mid to low range is also excellent. There is a sense of dynamism that is hard to imagine from the delicate design. There are abrasions on the tubes and plug shells (Kojima Yosuke)
The disposal price has been reduced (member discounts are not applicable). 2024/6/10 sales price 448,000 yen Maintained! Comes with original box. Levinson's long-selling prime amplifier. A dual monaural configuration that is thoroughly packed into one chassis while keeping the design concept of separation intact. You can be satisfied with all music genres with quality that easily surpasses separate amplifiers. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Sasaki Shota)
Maintenance information: 2024.3.3 Maintained (replace deteriorated parts. DC voltage/DC offset voltage/idling current/other inspection adjustments)
Accessories: original box, remote control, manual, power cable (non-genuine)
Main specifications: 100W+100W (8Ω) XLR input x 2 system RCA input x 3 system gain adjustable (preamp section 0/6/12 dB) W445 x H162 x D483 mm 29.5 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of instruction manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
RCA → XLR cable (No. 2 HOT) 1.0m pair, new-generation minimum value guarantee, stress-free 7N copper conductor & polyolefin sheath, model with fine texture, sharp, and very careful sound. Recommended for those who want to listen closely to classical music. There is dullness on the terminals. (YONEJIMA Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
※It is inexpensive because it is sticky. RCA cable, 1.0 m pair, 6N copper+silver hybrid conductor, Teflon insulator connector with correction chuck mechanism, is a high-performance model that adds a sense of dynamism of sound to the lower model's bass resolution and high transparency in the mid to high range. It rubs against the filter box, the paint is peeled off, and the sheath is sticky over time (Yonejima Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
Manufacturer maintenance, including pickup replacement, is being carried out in 2022. A belt drive CD player equipped with a 24-bit fully balanced module DAC. This player is popular for its thick sound quality unique to belt drives and a natural tone with no sense of emphasis. You can enjoy vocals and classical music in high quality. You can see a feeling of use on the exterior, scratches on the top plate, marks, dirt, dullness, scuffs, etc. on the front panel (Murakoshi Yoichi)
Maintenance information: 2022.1.13 maintained (spindle bell pick up replacement Assy shaft dismantling, cleaning, grease up inspection disc, confirm regeneration operation)
Accessories: stabilizer, replacement remote control
Main specifications: belt drive type CD player CD-R compatible audio output: XLR balanced RCA unbalanced digital output: coaxial (RCA) optical (optical) AES/EBU (XLR) W435 x H98 x D296 mm 10 kg
Equipped with an impedance changeover switch (LOW: 5 to 50 KΩ, MID: 40 to 100 KΩ, HIGH: 90 KΩ or more) that optimizes characteristics according to the input impedance of devices connected to a 1.0 m pair of RCA cables, a Valerie structure with all phase characteristics, and a high C/P model that employs many MIT patented technologies such as CVT couplers. (FUJISAWA KOSHI)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original box
Missing due to spikes. Equipped with Reimyo's D/A converter DAP-777 Victor's 20bit/k2processing/IC! It lets you hear beautiful sounds with a beautiful, natural balance. XLR is #3 HOT. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 operation confirmed
Accessories: instruction manual, power cord
Main specifications: sampling rate 32 · 44.1 · 48 kHz input RCA, optical, BNC, AES with phase reversal function W430xH65xD363mm 5.3 kg
*Set of 2 Acoliba RCA short pins. A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. It is not covered by the warranty even if the sound stops coming out or if it breaks down by any chance (Kobayashi Hitoshi)
Accessories: none
A wireworld RCA cable that uses OFC copper as the 1.0 m pair conductor of the RCA cable, perfect for a basic model. It is a cable with the feel of a wire world, with thickness in the mid range and glamor in the high range. As for the exterior, there is a screw on the plug (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
A standard wire world model with a wide 1.5m pair range and a smooth RCA cable. It allows you to enjoy music in the glossy, colorful mid- to high-frequency range. The exterior is dull and slightly sticky (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Digital RCA cable 1.0m TARA LABS digital cable This cable is popular among enthusiasts for its clear and straight sound. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
By converting light into magnetism with the 1.5m signal path of a digital RCA cable, the fate of digital, common mode noise is shut out! There is dullness on the plug (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 1000061118 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Mid-range model of the 1.0 m pad digital RCA cable. A high CP model with excellent smooth, textured mid-high range and three-dimensional spatial expression. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which combines resolution with a natural, good tone. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
An entry model for the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
RCA cable 2.0m pair, solid high resolution even though it is MIT entry class. The cable has just the right amount of sound pressure and is easy to use (Tamura Eiji)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Digital cable 1.0m RCA terminal Teflon/air insulator A golden cross digital cable that strongly reflects the sound of Caldas. The sound is thick and rich, and removes the thinness of the digital system. On the exterior, oxidation and darkening can be seen on the terminals (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: instruction manual
The 1.0m pair of RCA cables are thick, but they are easy to bend and easy to use. A beautiful sound spreads out, and S/N is further increased by connecting to the ground due to the type environment where the thickness increases (Tamura Eiji)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: none
The 2.0m RCA terminal stress-free 6ncU digital cable is bright and has an attractive character. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Stress-free processing that maintains the atomic arrangement in a healthy state at all times due to the unique self-annealing of the 1.0 m pair of RCA cables. It is a cable that enables strict and extremely accurate digital transmission. On the exterior, there is a small scratch on the terminal (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
The price has been drastically reduced! 2024/6/12 sales price 148,000 yen 2023 maintenance completed! A refined version of PHILIPS's core model LHH500. The range has also been expanded, and I have acquired the ability to reproduce a wide sound field, such as an orchestra. You can enjoy Philips sound at an affordable price, and this model is also recommended for those looking for a mid-range CD player. The exterior has small scratches, dullness, and bumps. Serial MZ009345050128 (Yonejima Satoshi)
Maintenance Information: 2023.7.4 Maintained (CD standby motor belt, tray slider motor belt replacement. Replace 5 tact switches. Reading check. (Internal and external co-cleaning)
Accessories: remote control, copy of instruction manual, replacement screws for transport lock pins (only 1)
Main specifications: CDM-4 mini die-cast mechanism, analog output, RCA/2V balance, 3V digital output, coaxial/optical power consumption approx. 17W, W457 x H140 x D359 mm, 16.7 kg
The price has been reduced. 2024/6/12 sale price 798,000 yen rare item! Comes with an engraved plate This is the first time it has arrived in 13 years. Like a BBC monitor, the dense mid range with little coloring and the low range where the sound of the box is effective are impressive. You can enjoy the fresh sound, which has quite a bit of momentum. This is one I want to make a noise with a vintage tube amp. The exterior has a different texture on the left and right, and there is dullness, dirt, etc. Serial 198/119 (Oikawa Tetsuji)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: cable
Main specifications: BBC monitor GEC tweeter x 2 +15 inch RCA woofer W580 x H770 x D320 mm 25.6 kg (actual measurement)
Headphone amplifier for electrostatic ear speakers. Sound quality has been improved and wide range has been achieved, such as an all-stage direct connection A class DC amplifier configuration that does not use coupling capacitors, a custom-made 2-axis quadruple volume, and an XLR input terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: power cable
Main specifications: input XLR, RCA with RCA through out frequency characteristics DC to 90kHz rated input level 100mV/100V output W150 x H100 x D360 mm 3 kg
RCA cable 1.5m pair with AC adapter Synergistic Research's top-grade reference series entry model. 2-core twist construction The clear, three-dimensional, and realistic sound images unique to Synergistic are appealing. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: AC adapter
Use the original 24K gold-plated plug with a 1.5m pair of RCA cables, polished by hand and nickel plated. The characters are highly transparent and sharp. It greatly enhances the freshness of the sound. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
This is the entry model for NORDOST with a 1.5m pair of RCA cables. The inexpensive yet clear and sharp sound inherits the taste of advanced models. It has creases and a bit of a habit (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: none
6N copper wire with multiple gauge (wire diameter) structure is used to improve performance as a 1.0 m pair conductor of the RCA cable. You can enjoy the clear and fresh MIT sound even with this entry model. The exterior is dull and some characters are missing (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: original box
RCA cable, 1.0 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable, 0.7 m pair, genuine molded plug, and the honest, thick, and powerful sound with medium and low sounds, which is unimaginable from the way it looks, is addictive (Asaine Tomoho)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none