Denon analog player high class model. The cabinet with a natural wood veneer semi-gloss finish accentuates the beautiful design. It is a stable player that uses a large die-cast aluminum turntable and quartz lock servo. It is also possible to change the cable and aim for an upgrade. Serial 6016304377 (Murakoshi Yoichi)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: power cord, connection cord, instruction manual
Main specifications: Servo-type direct drive system rotation/33/33/45 rpm wow flutter/ 0.1% or less static balance S-shaped pipe arm effective length 244 mm overhang 14 mm needle pressure adjustment range 0 to 4.0 g compatible cartridge 14.0 to 20.0 g (including headshell) W490 x H178 x D400 mm 14.5 kg
3-system cross selector for power amplifiers and speakers using high quality parts. The changeover switch uses silver-plated contacts to convey the original sound quality as it is. You can switch and select up to 3 pairs of speakers from the 3 power amplifier outputs. Or, as a speaker selector, you can switch and select up to 6 pairs of speakers from 1 power amplifier output (Murakoshi Yoichi)
Maintenance information: 2024.9.19 continuity confirmed
Accessories: instruction manual
Main specifications: 3 inputs/3 output systems, or 1 input/6 output systems, 250W (8Ω) silver-plated contacts, mechanical (rotary) switch, non-shorting switching, simultaneous bipolar switching W430 x D142 x H64 mm 3.7 kg
Exclusive audio rack made of wood fiber plywood and metal posts, with casters. The sturdy construction typical of TAOC is attractive. It is a rack where you can aim for stable sound quality without coloring. Overall scratches are conspicuous (Daiki Goto)
Maintenance information: 2024.9.21 operation confirmed
Accessories: none
Main specifications: load capacity 1 stage 100 kg W600 x H835 x D550 mm 27 kg
XLR (male) to RCA (female) conversion adapter sold in pairs No. 2 Hot has a high level of fresh sound quality that suppresses loss of the amount of information (Yonejima Satoshi)
Maintenance information: 2024.9.21 continuity confirmed
Accessories: No accessories
※There is a slight smell in the room. A power amplifier that inherits the direct lineage of the first P-300 when Accuphase was founded. It is easily compatible with low load impedances, and the deep, roomy playback sound is attractive. By connecting to a bridge, the driving power of the advanced P-7000 class can be reproduced. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 75W+75W (8Ω), 300W (8Ω) single channel 3 para push-pull current feedback amplifier circuit W465 × H180 × D425 mm 24.0 kg when connected to a bridge
The delicate and subtle sound, full of dynamism, is attractive. The volume knob is equipped with an AAVA volume control that uses a high rigidity/high accuracy volume sensor cut from an aluminum block. You can feel the fine particle feeling that comes from the height of SN. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.19 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Total harmonic distortion ratio 0.005% SN ratio at rated output balance/unbalance, both 109 dB input terminal balance (XLR) systems, 5 unbalanced (RCA) systems, 2 output terminal balance (XLR) systems, 2 unbalanced (RCA) systems, 2 unbalanced (RCA) systems W465 x H150 x D409 mm 19.2 kg
PSE standard product. This is a high-rigidity 6-port power strip with an original unplated phosphor bronze outlet mounted on a stainless steel chassis. Comes with brass spikes (OSP-SC) (Murakoshi Yoichi)
Maintenance information: 2024.9.19 continuity confirmed
Accessories: original box
Main specifications: phosphor bronze electrodes, using unplated outlets, 6 ports (100V 15A 3P power plug compatible) internal wiring/2.0mm diameter oxygen-free copper (OFC) single wire, wiring method across outlets W390 x H53 x D74 mm approx. 1.8 kg
A CD/SACD player compatible with many formats in the high-resolution era. It is a higher-level model that incorporates a lot of technology, and the built-in 32 bit/192 kHz DAC allows you to enjoy pure sound with a wide range during SACD playback. It is designed with high sound quality for CDs and compressed files, so it is recommended for those aiming for high sound quality in any format. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: remote control, power cord
Main specifications: 32 bit/192 kHz twin D/A converter jitter reduction IC twin power transformer damper tray equipped with CDR-R/RW (MP3 MPEG-4 AAC WMA), DVD-R/RW (DSD [DSD disk], MP3, MPEG-4, AAC, WMA), iPod, iPhone, and iPad compatible W435 x H130 x D329 mm weight 7.8 kg
*Currently sold. K's series pre-main amplifier. Despite its compact size, it has solid driving power, and is recommended for subsystems, etc. It is an extremely cost-effective premain amplifier. Serial 00600035 (Tomoho Asaine)
Maintenance information: 2024.9.21 operation confirmed
Accessories: None ※ remote control is not included
Main specifications: 40W+40W (6Ω) dimensions W270 x H143 x D345 mm weight 7.1 kg
*Currently sold. CD player equipped with a 1-bit DAC. Low-cost version of the Honorable Mention Series DPF-7002. The low sound that sits on your back is attractive. The exterior has a feeling of use such as dullness. Serial 00200271 (Tomonori Asaine)
Maintenance information: 2024.9.21 operation confirmed
Accessories: none
Main specifications: frequency characteristics 4 Hz to 20 kHz W270 × H133 × D315 mm 5 kg
A switching hub optimized for network audio. The model is equipped with a low-noise dedicated power supply, a high-accuracy TCXO clock, etc., and has clear sound quality. There is slight dullness (Sasaki Shota)
Maintenance information: 2024.9.21 operation confirmed
Accessories: power cable
Main specifications: 10/100/1000 Mbps auto-MDI/MDIX port x 5 W230 x H55 x D180 mm 1.6 kg
*Currently sold. Taket's super tweeter with a playback capacity of 150 kHz or more. The slide switch for switching the crossover was removed from the original BATPRO, fixed to the A position, and the terminals were changed. Efficiency can be switched between 5 levels with the rotary switch, and natural harmonics are produced (Yamato Yuki)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: original box instruction manual
Main specifications: maximum rated 35 V impedance 8 ohms playback frequency band 18 kHz to 150 kHz W125 x H90 x D100 mm approx. 260 g
A tubular power amplifier kit sold to commemorate the launch of Stereo Sound's “Tubular Kingdom.” It has been developed and designed based on the concept of “letting as many people as possible enjoy the advantages of vacuum tube amplifiers,” and it achieves both high performance, high stability, and high reliability. The input is provided with independent left and right volumes so that it can be used even when directly connected to a CD player. Serial 257 (Yamato Yuki)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: none
Main specifications: 5881WXT/6L6WGC push pull/ultra linear connection vacuum tube 6L6WGC x 4, 12AU7 x 3 rated output 25W+25W (6Ω) output impedance 6Ω (suitable for 4Ω to 8Ω) W388 x H187 x D330 mm 19 kg
Pure Class A operation phono equalizer that uses a CR-type equalizer that prioritizes sound quality. The circuit is compatible with both MC and MM cartridges, making it easy to use. The exterior is dull. Serial TEP60253 (Tomonori Asaine)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: power cable
Key Specifications: 15-position MC input impedance setting W232 ✕ H50 ✕ D174 mm Weight 3 kg
RCA cable 0.75m switchcraft is an interconnect cable with unknown details where you can see a wrapped wire like a western wire inside the plug shield. An attractive soft sound with soft vocals that don't feel irritating unlike what it looks like. The shield is rolled up at the plug connection (Murakoshi Yoichi)
Maintenance information: 2024.9.9 sound output confirmed
Accessories: none
An improved version of the BC-1 standard monitor broadcast by the British BBC, a model that plays British sound attractively. The brilliance and elegant expression of the classical sound source strings and vocal music are workmanship that can be said to be the prototype of the beautiful sound of European models. The internet has changed, and the emblem is out of stock. The exterior is serial 6353 and 635 (Fujisawa Yukishi)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: Saran net (non-genuine)
Main specifications: 3-way bass reflex type 8Ω 50W W305 x H635 x D298 mm 14 kg
※It is inexpensive because there are many scratches. An eye-catching TANNOY coaxial 2-way speaker with a beautiful enclosure. The sound quality is also of high quality typical of a modern aircraft, which combines a sense of localization, volume, and subtlety. The high range is wider than before, and transparency has also been improved. There are many scuffs and bumps scattered around the enclosure. Also, the saran net is torn. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: saran net, jumper plate
Main specifications: bass reflex type efficiency 88dB impedance 8Ω crossover frequency 1.5kHz body dimensions W271 x H470 x D260 mm mass 10 kg
Speaker cable consists of a 2.5 m pair Y lug on one side and a banana plug on one side. It is a cost performance model for the company's flagship model Genesis Silver Spiral. (TAMURA Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Using silver-plated 5N oxygen-free copper for the 1.0m pair of analoctm plug conductors, you can hear detailed, powerful, and colorful sounds. (TAMURA Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The perfect balance configuration of 1.8 m pairs of ultra-thick OFC conductors on the XLR cable and the OFC braided shield structure improve audio signal dynamics and achieve overwhelming common mode noise reduction. It realizes high purity signal transmission with low resistance. (TAMURA Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
This is the first product composed of 1.0 m of 210 borosilicate glass fibers in an OPT cable. Compared to conventional acrylic fibers, it achieves a much higher bandwidth and an attenuation rate of 1/10, making the sound transparent. (TAMURA Eiji)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: No accessories
Mid-grade model using 1.0 m pair of RCA cables with silver-plated 5N oxygen-free copper. It is a cable that enhances the vibrancy of the music and enhances its vividness. It is suitable for fast-paced music. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Mid-grade model using 1.0 m pair of XLR cables with silver-plated 5N oxygen-free copper. It is a cable that enhances the vibrancy of the music and enhances its vividness. It is suitable for fast-paced music. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
XLR cable 1.5m pair If you are familiar with the Mark Levinson brand and own the same brand as Madrigal's XLR cable, don't miss it! There are stains and threads on the sheath (Tamura Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
RCA cable 1.5m pair CZ is an abbreviation for control impedance. The conductor is silver-plated OFHC filled with a structural damping effect that holds uniform impedance characteristics over the entire length of the cable and a special gel (GEL) that enhances separation between internal core wires. The exterior is dirty, and there are scratches on the sheath and plug. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Power cable 1.8m non-twist Luxman standard power cable. This cable is thick, soft, and has a reputation for its high texture. It is an orthodox sound quality that can be used for a wide range of purposes without any habit. There is dirt on the sheath etc. (Fujisawa Yukishi)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
1.5 m pair of RCA cables, double shielded construction using plenty of high-grade copper. It has natural sound quality, high resolution, and deep, deep bass. Oxidation can be seen on the plug (Tamura Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 0.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 0.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are manufactured by Neutrik. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are manufactured by Neutrik. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0 m pair terminals of the RCA cable are made by Rean. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
※6 month warranty. Although it is a small speaker, you can enjoy solid sound with a 3-way system. The mid-high range is delicate, and it is a good speaker for those who want to enjoy music for a long time. It's relaxing in terms of sound quality, so if you want to relax with music, please give it a try. It is recommended not only for audio, but also for those with a background music sense or surround orientation. There are some chips and small scratches on the exterior. Serial 70100033 (Fujisawa Yukishi)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: saran net
Main specifications: 3 way 3 speakers 85dB 6Ω 45Hz to 40kHz W180 x H330 x D275 mm Weight 5.7 kg
The price has been reduced! 2024/9/18 sales price 238,000 yen ※There is a crack in the plastic part of the speaker terminal, and the cabinet is scratched, so it's cheap. A vacuum tube amplifier bearing the company's standard number “38,” with a sense of range, resolution, and speed that can be used today. The phono circuit is also compatible with MC (High/Low), and although it is only volume, it is possible to operate a remote control, and you can enjoy the slightly fresh sound of the vacuum tube that responds to convenience. Downsized from the original “38” series, it is a nice improvement in appearance that is small with a width of 400 mm and fits well. There are dents on the cabinet on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.9.18 Operation confirmed
Accessories: remote control, power cable, copy of instruction manual
Main specifications: rated output 30W+30W (6Ω) 25W+25W (8Ω, 4Ω) input phono (MM/MC high/MC low compatible) vacuum tubes EL34 x 4, ECC83 x 4, ECC82 x 3 W400 x H196 x D310 mm weight 20 kg
Power cable 1.2m earth is unwired ONTOMO MOOK's “Stereo Edition Anyone Can Do It! This is an appendix that was attached to the “Make Your Own Audio Accessory” magazine. You can enjoy clear sound with excellent cost performance (Murakoshi Yoichi)
Maintenance information: 2024.9.19 continuity confirmed
Accessories: none
The price has been reduced! 2024/9/19 sales price 778,000 yen with yuan box! Luxman's new flagship model D-08u. The digital circuit has the latest high sound quality design compatible with PCM 384 kHz/32 bit and DSD up to 5.64 MHz. The analog output terminals use a high-performance RCA terminal made of a new material copper alloy, which has both the same conductivity as copper and the hardness of brass, and a high-grade XLR terminal made by Neutrik. It is a high-end model incorporating high quality technology and material volume. As for the exterior, there are threads and small scratches on the top plate. Serial G50900237 (Fujisawa Yukishi)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: Compatible sampling frequency USB input (PCM), 32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192k, 352.8k, 384kHz (16, 24, 32 bit) USB input (DSD), 2.82M, 5.64MHz (1 bit)
Coax/OPT input/32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192kHz (16, 20, 24 bit) W440 × H154 × D413 mm 22.5 kg
The price has been reduced! 2024/9/19 sales price 178,000 yen It consists of a 3-way 3-unit configuration with carefully selected materials, such as a German Kurt Müller cone for the woofer, a hemp diaphragm, and a double-feather silk soft dome for the tweeter. While inheriting the natural and easy-to-listen sound quality typical of the SX series, it is a speaker with features of high transparency and a wide sound field. Repair marks, bumps, etc. can be seen on one side. Serial 17100814, 17100816 (Fujisawa Yukishi)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: saran net
Main specifications: Wave frequency characteristics 35 Hz to 30 kHz output sound pressure level 88.5 dB impedance 4 ohms W298 x H880 x D309 mm weight 23 kg
The price has been reduced. 2024/9/19 sales price 358,000 yen B&W800 series tall boy type basic model. Among the 800 series, it has a strong pop impression in terms of both appearance and sound quality, and is characterized by its light and quiet sound. It is a valuable speaker in a sense that makes you feel B&W's musical-oriented sound production. There is a scuff on one side. Other good (Oikawa Tetsuji)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: jumper cable, spikes, rubber feet, bass reflex sponge, cloth
Main specifications: 8Ω 89dB 30Hz to 50,000 Hz W238 × H1020 × D351 mm 28.0 kg
The price has been reduced. 2024/9/19 sales price 398,000 yen ※This is an upgraded product from No. 38L. A genuine Harman product. This is the pinnacle of the 380 series with high-quality parts and improved sound quality. The high mid to high range with lots of information is attractive, clear, and smooth. Classical string music and vocal music also respond with intonation quality. There is a scratch on the front panel on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: remote control, power cable, copy of instruction manual
Main specifications: fully balanced circuit, 4 RCA inputs, 2 balanced inputs, 2 analog outputs (balanced/unbalanced), dimensions W400 x H98 x D364 mm, weight 10 kg
Good condition! The only bookshelf type model in the PERSONA series, which is Paradigm's flagship. A pure beryllium diaphragm with a purity of 99.9% is used not only for the tweeter but also for the mid-bass driver, and by making full use of proprietary technology such as PPA acoustic lenses and ART edges, it is possible to reproduce sound without color to the extent that the presence of the speaker is erased. The exterior is beautiful with no noticeable scratches. Serial AGG6579086O10, AGG6579087O10 (Fujisawa Yukishi)
Maintenance information: 2024.9.19 Operation confirmed
Accessories: instruction manual, spike, stand, mounting screws, cloth, gloves
Main specifications: 2 way 2 speakers bar reflex type unit used: 25mm dome tweeter 178 mm cone woofer sensitivity 92 dB impedance 8 Ω crossover frequency 2.5 kHz playback frequency band 60 Hz to 45 kHz (± 2 dB) W225 x H435 x D330 mm weight 14 kg