The definitive edition of the Orthophone MC transformer. Comes with an MC/MM switcher SW, so you can switch easily. The rounded, warm sound quality is attractive. There is a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: boost ratio 27dB (3Ω, 47kΩ, 1kHz) input impedance 2Ω to 6Ω load impedance > 47KΩ channel balance <0.5dB frequency characteristics 10 to 100 kHz W153 × H95 × D110 mm 1.36 kg
Cabinet replaced with aurora sound, manufacturer maintained! MM/MC phono equalizer from a handmade amplifier workshop. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J13104 (Fujisawa Yukishi)
Maintenance information: 2024.6.16 manufacturer maintained (LED left and right replacement. Replace it with a new pink color. DC offset readjustment for amplifier section, voltage check for each part. (MUTE SW readjustment, measurement and overhaul of each part.)
Accessories: instruction manual, power cord, connection cord
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Comes with original box! This bookshelf speaker has an attractive sense of scale and volume of bass that cannot be achieved with speakers of the same size. The high range also uses a beryllium tweeter, so there is no cloudy sound and the tone is clear and bright. Overall, a model with excellent cost performance. Also, the design is excellent, and there is no doubt that it will look great as an interior decoration. In addition to dullness and small scratches on the exterior, there is a feeling of use such as dents and cracks. Serial B0871037 B0871037 (Hiroki Aso)
Maintenance information: 2024.6.16 sound output confirmed (good sweep test)
Accessories: Saran net jumper plate original box
Main specifications: 18 cm cone woofer 3.1 cm beryllium tweeter playback frequency band 42 Hz to 35,000 Hz impedance 8 ohms output sound pressure level 87 dB external dimensions W260xH390xD430 mm weight 17.2 kg
The price has been drastically reduced! 2024/6/13 sale price 250,000 yen SA600 homage! This anniversary edition was released to commemorate the 75th anniversary of JBL's founding. It's equipped with cutting-edge streaming audio, wireless connectivity, Dirac Live room correction, and Class G amplifier technology. Above all, Dirac, whose sound field correction tunes the listening environment, is attractive. The impression is that the sound is completely new, and the tuning matches modern sound sources. Serial HU0035-HL0001011 (Yamato Yuki)
Maintenance information: 2024.6.13 operation confirmed
Accessories: Remote control instruction manual power cable connection cable
Main specifications: output 200W (4Ω), 130W (8Ω) playback frequency characteristics 20Hz-20kHz ±1dB S/N ratio 120dB harmonic distortion ratio 0.002% input sensitivity 1V input impedance 10kΩ W449 × H114 × D327mm 12 kg
The price has been reduced! 2024/6/14 Sonas Faber's current speaker, Lumina 1, is now available at a sales price of 99,800 yen! Not to mention the high level of design typical of Italian products, the sound structure and high sense are truly a word. Please try it by reproducing a compact yet rich sound field and a smooth high frequency with a high sense of transparency. The condition is generally good. Serial 2870 2870 (Yamato Yuki)
Maintenance information: 2024.6.14 sweep test good
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, crossover frequency, 2 kHz, frequency characteristics, 65 Hz to 24,000 Hz, output sound pressure level, 84 dB, impedance, 4 ohms, W148 x H280 x D220 mm, weight 4.5 kg/book
The price has been reduced! 2024/6/14 sales price 99,800 yen TRIO premium FM tuner equipped with a valuable 9-speed vari-controller. High sensitivity and thick sound typical of a high-end aircraft. The high level of construction, which is particular about the texture of the knob and dial, is also a first-class product. The 15 kg body is just like a preamp. The exterior has a feeling of use such as dullness and small scratches. Serial 910367 (Tomonori Asaine)
Maintenance information: 2024.6.14 Operation confirmed
Accessories: copy of instruction manual
Main specifications: reception frequency 76 MHz to 90 MHz antenna impedance 300 ohm balanced/75 ohm unbalanced W460 × H161 × D463 mm 15 kg
The price has been reduced. 2024/6/15 sales price 398,000 yen A parallel push-pull mono power amplifier using EL34. The delicate, clear sound with good visibility is still wesugi! The perfect balance and expressiveness of the warmth and transparency typical of a vacuum tube is attractive. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: none
Main specifications: Parallel push-pull operation rated output 40W (continuous output) output impedance 4Ω, 8Ω, 16Ω playback frequency band 20Hz to 20kHz W435 × H232 × D175 mm 22 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/11 sales price 148,000 yen This is a 2-way bookshelf type speaker with high sound quality. The exterior, which is finished in a piano style, has a sense of luxury. The jumper cable on the back is also a strong product using a fairly thick wire. The sound quality is impressive with a low frequency range that you wouldn't think of as a bookshelf, and the center of gravity is low. The reproducibility of the piano was wonderful, and the feeling of use can be seen in the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 Operation confirmed
Accessories: saran net, jumper cable
Main specifications: 2-way sealed speaker unit/17cm Kurt Müller Korn for bass, 2.5cm pure silk soft dome rated input 50W maximum input 150W output sound pressure level 87dB impedance 6Ω crossover frequency 2,500Hz playback band 40Hz to 30kHz W219 x H350 x D290 mm 10kg/book
The price has been reduced. 2024/6/15 Sales Price 168,000 yen This is the best model in the Concerto series. A floor-type speaker system using a passive radiator system. In addition to the smooth, high-quality sound unique to Sonas, the tone is bright and highly transparent. There is a repair mark on the bottom of one side of the saran net. There is damage near the terminal, and the jumper plate is missing (Daiki Goto)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: spikes
Main specifications: 2 way, 2 speakers, passive radiator, playback frequency band 40 Hz to 20,000 Hz, 87 dB impedance, 8 ohms, W240 x H1000 x D290 mm, 22 kg
*Currently sold. IFI-Audio phono equalizer. It is a compact yet high-spec model equipped with 6 stereo equalizer curves, a load transfer switch for MC cartridges, an ultra-low noise MC stage, a load transfer switch for MM cartridges, and a gain adjustment switch. The exterior is dull, there is a feeling of use, and there are places where the letters on the back have disappeared (Sasaki Shota)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: copy of manual, power cable
Main specifications: frequency characteristics 10 Hz to 100 kHz output impedance 110 ohms W68 x H28 x D158 mm weight 198 g
*Currently sold. Taket's super tweeter with a playback capacity of 150 kHz or more. The slide switch for switching the crossover was removed from the original BATPRO, fixed to the A position, and the terminals were changed. The efficiency can be switched between 5 levels with the rotary switch, creating natural overtones. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: No accessories
Main specifications: maximum rated 35 V impedance 8 ohms playback frequency band 18 kHz to 150 kHz W125 x H90 x D100 mm approx. 260 g
*Currently sold. Although it is small and compact, the sound quality can truly be called a celebration. The sound quality is smooth and warm, so you won't get tired even if you listen to it for a long time. Feel free to enjoy classical music and vocals. The exterior has line marks and dullness. Serial 656558/656560 (Takasaki Atsushi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: saran net
Main specifications: 2-way sealed 2.5cm titanium dome tweeter 15cm woofer impedance 8Ω efficiency 88dB W206 x H350 x D250 mm weight 4.7 kg
The disposal price has been reduced. Member prices are not applicable. 2023/10/23 sales price 29,800 yen ※Currently sold. Comes with a special case! Portable headphone amplifier with built-in D/A converter. DSD256 (11.2 MHz/1 bit) PCM supports native playback of up to 768 kHz/32 bit. Please enjoy the sound quality unique to a thick mojo in the mid to low range. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2023.10.23 Operation confirmed
Accessories: original box
Main specifications: output level 35 mw/600 ohm, 720mw/8 ohm, output impedance 0.075 Ω, dynamic range, 125 dB input system, 3 optical systems, 1 coaxial x 1, microUSB x 1 output system, 2 output systems, headphone jack x 2, charging time, approx. 5 hours continuous operation time, approx. 8 hours W82 x H60 x D22 mm 180 g
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box, characteristic table
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
Full maintenance such as internal and external maintenance was carried out, and the finish was beautiful! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. Serial 55553L, 55553R (Fujisawa Yukishi)
Maintenance information: 2024.5.11 Maintained (exterior repair/repaint) 2017.4.25 Maintained (exterior polishing/all coated woofer cone paper/unit frame paint chip putty repair grill dent correction/paint tweeter distortion and maintenance (edge deformation repair, magnetic circuit slit maintenance complete) unit detachment terminal replacement (banana plug compatible product) ATT cleaning capacitor replacement*Some capacitors before replacement Since it is difficult to remove, remove the wiring to check the remaining input/output waveform and balance, sound output check, frequency characteristic measurement check (~ 42 kHz))
Accessories: No accessories
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
Cotter's most popular MARK2 TYPE L MC boost transformer for low impedance such as orthophones. Using a strong, sealed case and silver wire, the strong and fresh tone is attractive. Perfect compatibility with SPU etc. The transformer itself is different from P/PP/S. RF Enterprise regular import model. ※Silver wire breaks easily, so please handle it carefully (Murakoshi Yoichi)
Main specifications: primary impedance 1 to 6 ohm silver wire triaxial output cable, adopted size W76 x H55 x D150 mm, approx. 1.3 kg
※The cantilever is slightly to the right. This is the GE successor to the MC cartridge masterpiece SPU. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to the conventional wild tone. The needle cover is missing, rust floats on the G-shell terminal surface, and there is rust on the cantilever (Murakoshi Yoichi)
Maintenance information: 2024.6.14 sound output confirmed
Accessories: none
Main specifications: MC type elliptical needle output voltage 0.2 mV playback frequency band 20 to 20,000 Hz load resistance 10 ohms or more impedance 3 ohms needle pressure 3.0 to 4.5 g dead weight 32 g
※The cantilever is slightly tilted to the right. It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. The condition is generally good. Serial M20700210A (Yamato Yuki)
Maintenance information: 2024.6.13 operation confirmed
Accessories: instruction manual power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 1,600,000 yen ※This is a 50 Hz specification. Maintained! A new Studio Technik Dusch suspension on a glass turntable! Phonoiko is also a nice setting at 155th in the Franz era. The sharpness, precision of contouring, and a very thick sound are just words. A world-class player who still grabs the hearts of many analog fans and never lets go. Enjoy sounds that can only be experienced with EMT. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Maintained (930ST: motor detached/lubricated, adjusted. Replace deteriorated forward phase capacitors with new ones. Speed adjustment brake felt replacement Main bearing housing detachment, gasket replacement, bearing ball damage replacement, etc., sealant attachment assembly. Replace the motor bush with a new one that has deteriorated. Replace the deteriorated turntable anti-noise rubber belt with a new one. Replace the idler with a new one that has deteriorated. 155ST: Balance adjustment trimmer resistor defective replacement. NF gain adjustment trimmer resistor noise exchange. Foundation solder deterioration correction. audio measurements. SW/VR cleaning, coat processing. Left and right output adjustment (Running test OK)
Accessories: power cord, manual (copy), oil, connection cable (1 pair each of XLR and RCA)
Main specifications: idler drive system aluminum die-cast turntable rotation speed 33 1/3, 45, 78 rpm W490 x H234 x D410 mm [tone arm EMT929] dynamic balance type needle pressure range 0 to 5 g [equalizer amplifier 155 st] frequency characteristics 40 Hz to 20,000 Hz input impedance 140 to 200 ohms output impedance 200 to 600 ohms [cartridge TSD-15 ] MC type output voltage 0.15 mV suitable needle pressure 2.5 g impedance 24 ohms
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 148,000 yen Speaker that has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
The price has been reduced! 2024/6/13 sales price 108,000 yen A phono equalizer amplifier equipped with a function to switch load impedance and load capacity according to the characteristics of the cartridge. Equipped with 2 line inputs, each position can be switched on the front side, and impedance settings can be adjusted with the back dip switch. There is a small scratch on the front (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: original box, copy of manual, power cable
Main specifications: NF type equalizer (RIAA) input sensitivity: MM 3.2 mV, MC HIGH 0.37 mV, MC LOW 0.12 mV input impedance: MM 34 kΩ, 47 kΩ, 56 kΩ, 100 kΩ (switchable), MC HIGH 40 Ω, MC LOW 2.5 Ω input/output: 2 unbalanced systems/1 unbalanced system W364 x H81 x D274 mm 4.3 kg
A floor-type speaker with an authentic 3-way configuration with all-round appeal, from pure audio to theaters. The wide range playback has a sense of volume, and there is an exhilarating feeling that you can drop out the mids and highs that are particularly calm and easy to hear. There is a crack in part of the plastic that covers the magnet on the saran net (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: jumper plate
Main specifications: 3-way bass reflex type (non-magnetic) playback frequency band 45 Hz to 50 kHz impedance 6 ohms sound pressure level 89 dB W354 x H1,012 x D374 mm weight 25.0 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The cantilever is slightly to the right (Sasaki Shota)
Maintenance information: 2024.6.13 Sound output operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. Familiar sound with a wide range. It has a supple sound and is comfortable to listen to. The needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.13 Sound output operation confirmed
Accessories: needle cover
Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
Maintained! More than 50 years have passed since the release of Sony's vintage pre-main. The innocent tone doesn't make you feel stressed is good, and the balance from treble to bass is good, and the tone control response is good. The retro-futuristic design is also impressive. *This unit does not use a speaker protection relay, so it may make an abnormal noise when the power is turned on and off, but this is a specification. There is a scratch on the cabinet on the exterior (Sasaki Shota)
Maintenance information: 2024.6.13 maintained (board repair due to poor contact within the TONE board, 4 transistors with PHONO noise were replaced, adjusted semi-fixed VR due to unstable idling voltage, contact repair due to poor contact with each push SW contact, and volume slide VR disassembly and cleaning were performed.)
Accessories: none
Main specifications: 35W+35W (8Ω) input sensitivity/impedance Phono 1.2mV/47kΩ Phono 2 system Tuner 1 system AUX 2 system Tape 2 system AC100V, 50 Hz/60 Hz 100 W 400 x H149 x D316mm weight 9.8 kg
※The earpads are not in good condition, so they are cheap. These open-air headphones feature well-balanced, natural sound from high to low frequencies. Try a slightly different sound from low impedance headphones. ※The cable has been replaced. On the exterior, there are dirt and cable marks on the earpads and head pads (Satoshi Yonejima)
Maintenance information: 2021.11.12 sweep test good
Accessories: original box
Main specifications: dynamic open air headphones, 300 ohms, 97 dB, 12 to 40,500 Hz, plug shape, 4.4 mm
Comes with original box! It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/1 sales price 298,000 yen Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/7 sales price 89,800 yen*Inexpensive because the woofer cone is highly deformed. Maintained in January 2024! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.6.6 exterior repair maintenance (exterior chip repair (conspicuous areas only), front baffle painting) 2024.1.12 maintained (exterior repair stain colored front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The exterior is dull. Serial 5997 (Yonejima Satoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
This is a 150-4H instrument model. It is based on the masterpiece unit 150-4C, and the thick sinking low frequencies and instantaneous power that can be imagined even from thick rims cannot be enjoyed without this woofer. This product is recommended for those looking for an aggressive mid-low range that makes you want to make a loud noise by storing it in a front load enclosure, etc. In addition to discoloration of the exterior and corn paper, mold and dirt on the edges, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: 38 cm ferrite playback frequency band 35 Hz to 2.5 kHz 98 dB impedance 8 ohms rim outer diameter 400 x D157 mm screw pitch 370 mm (diagonal) 13.85 kg
This is the L-type TH-9708, which is the highest peak step-up transformer along with cotters. The detailed, glossy, and deep sound is the true essence of analog playback. The degree is generally good. Serial 890167 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: primary impedance: LOW 3 ohms size W16.5 x H12 x D10 cm dead weight 2.75 kg
Maintained by the manufacturer! This mono power amplifier was developed as the first full-scale high-output power amplifier for consumer use. The sound quality is unique to Accuphase, which has high power and is full of subtlety. Equipped with a digital meter that instantaneously calculates real power. By switching between modes, it is easy to drive even ultra-low impedance speakers. There is a feeling of wear on the exterior such as scratches. E1X029 E1X030 (Jun Tamai)
Maintenance information: 2024.6.6 Accuphase maintained (relay contacts replaced due to deterioration, all switches, volume, reworked due to contact cleaning, parts replaced due to stress deterioration, safety confirmation, pressure resistance test, operation characteristics check, each readjusted cleaning pair, similar treatment for matching characteristics)
Accessories: original box
Main specifications: 800W+800W (8Ω) W481 x H239 x D489 mm 47.2 kg
A special edition model commemorating the 70th anniversary of JBL's founding. The latest version that has been refined over the traditional 4312 series. A 12-inch diameter woofer unit equipped with the advanced 4429 is used. It is an all-round speaker with a sense of energy and good range extension. The exterior has dullness, small scratches, and threads. Serial 00687/00688 (Yonejima Satoshi)
Maintenance information: 2024.6.11 sweep test good
Accessories: saran net
Main specifications: 3-way bass reflex type 300mm woofer 125mm mid-range 25mm tweeter impedance 6Ω output sound pressure level 90dB frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
Equipped with an impedance changeover switch (LOW: 5 to 50 KΩ, MID: 40 to 100 KΩ, HIGH: 90 KΩ or more) that optimizes characteristics according to the input impedance of devices connected to a 1.0 m pair of RCA cables, a Valerie structure with all phase characteristics, and a high C/P model that employs many MIT patented technologies such as CVT couplers. (FUJISAWA KOSHI)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original box
This is a small bookshelf speaker from the 4th generation “MENUET.” Rosso color type. The glossy, small, yet high-quality sound that is traditional for MENUET is alive and well. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: saran net, instruction manual, original box
Main specifications: 2 way 2 speakers, low range, 115mm, cone type, treble range, 28 mm dome, playback frequency characteristics, 59 Hz to 25 kHz, input sensitivity, 86 dB, impedance, 4 ohms, W150 x H250 x D230 mm, 4.0 kg
Genuine Harman Mark Levinson's masterpiece amplifier. The large diameter unit is moved lightly with an order of magnitude of driving force. The tight, deep low-range texture is wonderful, and it clearly depicts slight differences in pitch and differences in the timbre and nuance of the instrument. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.6.10 Operation confirmed
2023.4.13 Maintained (replacement of deteriorated parts such as capacitors, resistors, etc., part of the board was corroded due to condenser fluid leakage, and was cleaned and repaired.
Other inspections and adjustments have been made)
Accessories: power cord (non-genuine), copy of instruction manual, remo pin, short pin
Main specifications: Dual monaural configuration, stereo amplifier, rated output 200W+200W (8Ω), frequency characteristics, 4 to 140000 Hz, SNR, 104 dB, input impedance, 50 kΩ, dimensions W483 x H210 x D450 mm, weight 40 kg
The price has been drastically reduced. 2024/6/5 sales price 348,000 yen Maintained! This is a very well made 300B single amp. The outstanding sharpness and power, and sweet and gorgeous sound are unbearable. The JJ 300B is used as the output tube. It is a combination of the popular transformer TAMURA F-2007 pair, PC-3004, and A-4003. The first stage uses 12AT7, and the rectifier tube uses 5AR4. It comes with a volume and can be connected directly to a CD. There is a ham balancer inside (Yasuhito Koshihama)
Maintenance information: 2024.6.5 maintained (AC cord missing added; wiring changed to output impedance 4Ω → 8Ω; main volume 100K B curve → 2 replacement; vacuum tube 12AT7 deterioration replacement; RCA jack and vacuum tube socket caulking repair. Operation checked with AC 100V (measured with rated output 10W+10W SP8Ω)
Accessories: power cable
Main specifications: output 10W+10W (actual measurement) W434 × H217 × D333 mm 18.9 Kg (actual measurement)
※The head pad is loose, so it's cheap. The earpads are in good condition. The Edition series flagship model is now in stock for the first time at Hi-Fi. It has a good balance from high to low frequencies, and it seems that it can be used regardless of genre. The ear pads are also soft to the touch and can be worn without stress. A slightly soapy scent remains on the body. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: special case, mini jack conversion plug
Main specifications: sealed dynamic headphone impedance 30 ohms playback frequency band 8 to 35,000 Hz sound pressure level 96 dB
The price has been drastically reduced. 2024/6/8 sales price 198,000 yen A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals. The exterior, the SP terminal metal part is dull, and small scratches are scattered on the spikes, and a feeling of use such as dullness and abrasions can be seen throughout (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: saran net, spikes, cloth cover
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 35Hz-20kHz impedance 4Ω output sound pressure level 90dB W237 x H1080 x D310 mm 25 kg
*Currently sold. ONKYO 2-way speaker The sound quality is sharp, has a clear impression, and has a sense of stability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 operation confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex bookshelf type woofer, 12 cm, cone type tweeter, approx. 2 cm, dome type impedance, 6 ohms, maximum input, 80 W, W193 x H340 x D270 mm, 5.2 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see the exterior, mold, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. Lo-D's 3-way 3-speaker system. I have a good impression that the sound connection from the low range is good. As a domestic speaker of this era, it makes me listen to jazz in a sexy way. In addition to the exterior and paint peeling, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: 3 way 3 speakers sealed impedance 6 ohms output sound pressure level 92 dB W315 × H575 × D305 mm 13 kg
The price has been reduced! 2024/6/2 sales price 69,800 yen This is an EV PA speaker. You can enjoy a clean sound with crisp high frequencies and responsive low frequencies. It's made of resin and is lightweight, so it's easy to carry around. It can be used for a wide range of purposes, such as reeds at home and at events. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, 30 cm woofer impedance, 8 ohm, 300 W, 80 to 25,000 Hz, size W430 x H585 x D314 mm (actual measurement), 15.3 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/5/26 sales price 348,000 yen The current ELAC speakers have arrived! It firmly follows the merits of ELAC up until now, and shines with a higher degree of perfection than ever before. With an expanse that doesn't make you feel the presence of the speaker, and the sound is delicate and bright, it is a practical speaker regardless of genre. There is a small dent in the lower woofer on one side. Serial 31800E000053/31800E000056 (Takasaki Atsushi)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: instruction manual, jumper, spike holder, original box (cushioning material partially broken)
Main specifications: 2.5-way bass reflex type crossover frequency 450/2400 Hz frequency characteristics 30 to 50,000 Hz efficiency 88 dB recommended amplifier power 40 to 300 W rated input 130 W impedance 4 ohms W229 ✕ H1,000 x D266 mm 19.1 kg
The price has been reduced! 2024/6/5 sales price 34,800 yen It is equipped with a 165 mm diameter woofer that uses a Kevlar woven cone that suppresses the generation of split vibrations, and is equipped with an advanced driver unit that supports rich musicality. The cabinet design is optimized using proprietary computer software and the latest spectrum analyzer analysis technology, and the input terminals are equipped with 2 sets of speaker terminals compatible with banana plugs. There is a small scratch on the side of the exterior. Serial WH057521BGH0025, WH057521BGH0025 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, original box, jumper plate, saran net
Main specifications: output sound pressure level 87 dB impedance 8 ohms playback frequency band 45 Hz to 20 kHz W196 x H355 x D290 mm weight 6.5 kg