The price has been reduced! 2024/3/5 sales price 500 yen details unknown. A velvet-style record cleaner that is small and easy to use. There is a feeling of use on the exterior, such as scratches and dullness (Tamai Jun)
Accessories: none
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
Sold 1 bottle, 6SL7 high-reliability tube, made in America, red brown base, black plate, measured value 58 (rejected value 32) with original box ※The measured values indicate gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, metal, brown base, made in America, measured value 66/64 (rejected value 44) with original box (some written), sticker is attached to the base part, and there is a getter burn ※ The pair was determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been reduced. 2024/2/2 sales price 2,500 yen. ※Inexpensive because 1 bottle is out of stock. Orthophone speaker terminal joint cable Be sure to improve the sound quality of speakers compatible with bi-wiring with 7N ultra-high purity copper wire. One vinyl cover is short (Takasaki Atsushi)
Accessories: original box
Main specifications: 7N copper (diameter 1mm) +gold plating treatment approx. 150mm/book
Power cable 1.5m 7N copper conductor, custom-made plug and connector using stress-free treated beryllium copper, an advanced model of the company's power cable. The clear tone without stagnation and the sense of sound pressure are amazing. There is a fine scratch on the plug cover (Kojima Yosuke)
Accessories: none
Antistatic brush for audio Uses the core-sheath composite conductive acrylic fiber “COREBRID TMB/Core Brid TMB,” which was developed by Mitsubishi Chemical Corporation and is the only one produced in the world. Produced domestically using traditional manufacturing methods, this brush removes static electricity from analog records, CDs, Blu-rays, etc., so you can enjoy the original sound quality and images.
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/9 sales price 258,000 yen current product! Style 35 Hi-Fi Hall with a beautiful piano black finish is in stock for the first time! The newly developed ribbon tweeter and woofer achieve high fidelity and strength with traditional diaphragms. As for the exterior condition, there are slight scratches on the side (Yamato Yuki)
Maintenance information: 2024.6.9 operation confirmed
Accessories: original box saran net
Main specifications: 2-way rear bass reflex type 85dB 4Ω W179 x H304 x D284 mm 6.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
PSE certified product. This product combines Eau Rouge's CFRP technology with a lightweight, highly textured acrylic box. Although it is the company's entry model, it is a product with a firm focus on sound quality. There are a few small scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: W300×H80×D65mm
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
The disposal price has been reduced! (Member prices are not applicable) 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8,000 Hz maximum input 40W 8Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
The 0.5 m HDMI cable connector is made of high-grade aluminum material, and the outer skin of the cable uses a slim nylon mesh cable that can be wired neatly and is less burdensome when bending. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: case
Denon high-end MC cartridges in the heyday of analog, using amorphous boron pipes. A sound with a wide range and good separation, which has a different trend from the standard 103 series. This is the reference cartridge at the time. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: none
Main specifications: MC type output 0.2 mV 40 ohm boron cantilever solid diamond special oval needle playback band 20 to 75 kHz proper needle pressure 1.0 to 1.4 g dead weight 5.8 g
The price has been drastically reduced. 2024/5/3 sales price 29,800 yen A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: Playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
The price has been drastically reduced. 2024/6/12 sales price 328,000 yen An active speaker from the “Formation Suite” series wireless audio compatible with high-resolution transmission. One unit is powered by a 125W digital amplifier. It features a high-quality sound that casually expresses a sense of dynamism when the sound starts up. It is a system that is likely to become a new listening style in the future, as it can also support network playback using Roon without using a separate amplifier. There are thin threads here and there (Oikawa Tetsuji)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: power cable, instruction manual
Main specifications: 2-way active speaker output 125W x 2 Wi-Fi, AirPlay 2, Spotify Connect, Roon Ready compatible Bluetooth version: 4.1 Bluetooth compatible codecs: SBC, AAC, aptX HD W197 x H395 x D305 mm 10.6 kg/unit
The price has been drastically reduced. 2021/9/21 sales price 99,800 yen with casters. This is Hayami's horizontal 5-tier audio rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with KP-4CT casters (set of 2)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
The price has been drastically reduced. 2021/9/23 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The HDMI cable is a 3.0 m high-grade connector, and a nylon mesh cable is used for the outer shell. It is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
NAGAOKA stylus cleaner. This is a standard cartridge cleaner product and an easy to use and convenient item. It's a volatile and safe cleaner. About 80% of the remaining amount is left (Yamato Yuki)
The price has been drastically reduced! 2024/6/5 sales price 328,000 yen Maintained! Macintosh's first power amplifier with a balanced circuit configuration. Resolution and transparency have been added to the traditional rich, extruded tone. The blue meter, which can be said to be synonymous, is alive and well, and has plenty of presence, pleasing not only the ears but also the eyes. The exterior is dull and has small scratches. Serial JGC1730 (Yonejima Satoshi)
Maintenance information: 2024.6.5 Maintained (volume exchange (both channels) due to left channel volume shaft bending and poor contact points) lamp, electrolytic capacitor, etc. due to deterioration, acrylic removal cleaning, solder correction, connector cleaning, panel peeling correction (character area, etc. are not allowed) switch cleaning. Bias and offset check output audio check)
Accessories: copy of instruction manual
Main specifications: 300W+300W (2/4/8Ω), 600W during MONO (2/4/8Ω) W445 x H196 x D420 mm 35 kg
Comes with original box! It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
※The cantilever is slightly tilted to the right. It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)
Maintained by the manufacturer! Refined model of the PM-17SA. Further refinement has been applied to the highly transparent tone, which is clear and has good visibility. The thin and stylish design and the delicate expressiveness of modern SN are attractive. The subdued power draws more precise and expressive depictions. Serial MZ010248520101 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 manufacturer maintenance (speaker output relay replacement, amplifier board soldering correction, source direct SW disassembly and cleaning, inspection of each part, operation test implementation)
Accessories: remote control, instruction manual, power cable
Main specifications: equipped with pre-out power-in terminals 60W+60W (8Ω) W458 x H110 x D429 mm 16 kg
Comes with original box It is an MC cartridge that uses diamond star rice chips and boron cantilevers, which are also used in higher-level models, and is characterized by outstanding high-pitched fineness and clear sound quality even in the same price range. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: moving coil type, 4 ohm, needle pressure, 1.7 to 2.0 g, output voltage 0.3 mV or more, playback frequency 10 Hz to 30 kHz, solid boron, cantilever, machined aluminum, body, diamond stylus tip, 10.5 g
The price has been reduced! 2024/6/2 sales price 118,000 yen ROYAL AUDIO TSB-9 with dedicated stand! A popular Pioneer ribbon tweeter. A golden combination of beryllium diaphragms and alnico magnets. In addition to the ultra-high frequency sound quality correction, the expansion of spatial expression, and the wide sound field can be clearly experienced with classical sources. The exterior is dull, and there are scratches on the front mesh and pedestal (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: dedicated stand
Main specifications: input impedance 8 ohms, playback frequency band, 5,000 Hz to 120,000 Hz, maximum input, 100 W, output sound pressure level, 97.5 dB, crossover frequency of 5,000 Hz or more, W134 x H89 x D179 mm, 2.6 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
Compared to the MK1 LP/cable demagnetizer, this brush-up model has a dramatically increased demagnetization effect! I dared to leave the protective sheet attached to the surface of the acrylic cover. The exterior is also good without major scratches (Oikawa Tetsuji)
Maintenance information: 2024.6.11 operation confirmed
Accessories: instruction manual, power cable
Main specifications: W430 x H105 x D400 mm 9.02 kg
The price has been drastically reduced. 2013/7/23 sales price 298,000 yen Edison disc phonograph. It's a name given by Edison, who created the gramophone, and there seems to be an anecdote where he was amazed and jumped up when he first heard the sound from a cylindrical gramophone he made himself. You can't enjoy the indescribable atmospheric sound anywhere else. A horn that is one size larger than the H19 is used. The exterior also has cracks, peeling, and cracks on the veneer due to aging. Also, rust is conspicuous on the wheels underfoot (Oikawa Tetsuji)
Maintenance Information: 2013.7.23 Maintained
Accessories: handle, snail
Main specifications: horn opening W392 x H260 mm main body W484 x H1140 x D500 mm
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo)
Maintenance information: 2024.6.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g