Current model is the company's entry-grade, Lumina series bookshelf speaker. Not to mention the high level of design typical of Italian products, the sound structure and high sense are truly a word. It reproduces a small yet rich sound field and a smooth high frequency with a high sense of transparency, please try it out, there are no noticeable scratches (Kojima Yosuke)
Maintenance information: 2026.6.5 sweep test is good
Accessories: jumper plate
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, crossover frequency, 2 kHz, frequency characteristics, 65 Hz to 24,000 Hz, output sound pressure level, 84 dB, impedance, 4 ohms, W148 x H280 x D220 mm, weight 4.5 kg
Disposal price has been reduced (member price not applicable) 2026/5/29 sales price 1,500 yen HDMI cable 1.0 m This is an initial HDMI cable with a high quality design similar to SUPRA. Although it is a model from the 720p to 1080i era, its sharp image expression and clear sound transmission are attractive. It is well-built and has a sense of stability typical of high-grade HDMI at the time. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance Information: Continuity Unconfirmed
Accessories: none
The price has been reduced! 2026/6/3 sales price 148,000 yen Maintenance was completed in 2024/10. A model representing 70s MICRO direct drives. The armless arm mount, which has a 3-point support structure and is compatible with a variety of arm exchanges, is easy to use, and expandability that allows you to customize it in your own way is also attractive. Not only is the sound satisfying to listen to, but the stoic design, which seems to have cut down on all waste, also tickle your heart. The exterior is corroded and oxidized. Also, the cushion rubber has not deteriorated. (TAMURA Eiji)
Maintenance information: 2024.10.3 Maintained (capacitor replacement in the main body strobe circuit. Cleaning correction, operation check, VOL cleaning)
Accessories: none
Main specifications: Direct drive aluminum alloy 31 cm turntable (2 kg) W444 x H125 x D444 mm weight 10 kg (phono motor only)
The price has been reduced! 2026/6/1 sales price 75,000 yen*The horn, diffuser part, etc. have been changed to gunmetal specifications. JBL professional tweeters. Since it is designed to make sound fly far away, the sound quality is solid and straighter compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. Small scratches and a feeling of use can be seen. Serial 23603, 22583 (Fujisawa Yukishi)
Maintenance information: 2026.6.1 operation confirmed
Accessories: No accessories
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
The price has been reduced! 2026/6/1 sales price 59,800 yen phono equalizer from British audio manufacturer Sonettia. Although all switches have a simple design equipped on the back panel, detailed settings compatible with many cartridges, including MM/MC, are possible. Equipped with an IEC warp filter that attenuates ultra-low frequencies, it is possible to reduce speaker damage due to severe record warpage, etc. Of course, you can remove the filter and use it with a normal RIAA curve. Small scratches and a feeling of use can be seen. Serial 3018 (Fujisawa Yukishi)
Maintenance information: 2026.6.1 operation confirmed
Accessories: copy of instruction manual, power cord
Main specifications: input impedance 1kΩ, 47Ω, 100Ω, 220Ω (and a combination of these) input capacitance 10pF, 47pF, 100pF, 200pF (and a combination of these) input sensitivity MC0.5mV/mm5.0mV size W434 ✕ H64 ✕ D280mm 6kg
The disposal price has been reduced. Member prices are not applicable. 2026/5/23 sales price 178,000 yen Maintained by Denon service! The OrtoFon AS-212S is mounted on the DP-80 motor and tonearm. It is set in the Slim Line (LEAD-CONSOLE) cabinet. It is an attractive record player with a clear sound with a double-structured turntable. The cartridge's traceability is maximized by a design that suppresses unnecessary resonance and howling to the extreme. There are stains, corrosion marks, small scratches, etc. on the exterior as a whole (Wang Zhan)
Maintenance Information: 2026.5.22 Maintained (Transistor replacement with rusted feet. AC cord replacement Replace the capacitor in the head amplifier and the capacitor for strobe lighting. Replace the capacitor in the servo power supply board. Turntable seat replacement. 33, 45 leaf SW cleaning. Head clearance adjustment, speed adjustment. (Other inspection of each part, operation test)
Accessories: copy of instruction manual, dust cover
Main specifications: quartz lock direct drive outer rotor 3 phase AC servo motor double structure aluminum die-cast turntable compatible with 33 and 45 rotations W508 x H208 x D422 mm 21.5 kg
RCA cable is a high quality model with proper design and tuning, from 1.5 m pair insulators, plug contacts, and coating materials. The exterior is dull and has a sense of use over time (Matsumoto Tsuyoshi)
Maintenance information: 2026.6.4 continuity confirmed
Accessories: original bag
Magnesium alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges. There is corrosion and a feeling of use on the exterior (Murakoshi Yoichi)
Maintenance information: 2026.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight 6g
The disposal price has been reduced. Member discounts are not applicable. 2026/4/24 sales price 99,800 yen ※For commercial use, there is no guarantee and it will be delivered as is. Speaker with built-in amplifier It sounds better than its size, and has crisp low frequencies and high frequencies that are smooth and not too thin. It was fine to play fusion, and guitar vocals, rock, etc. went well together. The ring part on the outer periphery of the unit is slightly sticky, and the meter lamp does not go out even when the display SW is turned off (Takasaki Atsushi)
Maintenance information: 2026.4.24 sound output confirmed
Accessories: power cord, manual CD
Main specifications: 10 inch LF driver, 1 inch titanium dome rear firing compression driver, coaxial design, 200W (LF) /200W (HF) power amplifier, approx. W381 x H381 x D381 mm, approx. 25 kg
Comes with original box! It is an arm that inherits the basic design of the 3012 and has increased versatility with all players through downsizing. It is also attractive that it is compatible with lightweight cartridges to heavyweight cartridges such as SPUs due to its 2-split main weight. Due to the sharp followability of the knife edge, the clear and cohesive sound quality still boasts high performance. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.6.3 operation confirmed
Accessories: original box instruction manual copy connection cable head shell subweight
Main specifications: Static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), variable needle pressure range 0 to 5 g, 525 g
3-channel selector for audio design. It is convenient for inputting the output from multiple preamps to one power amplifier, or inputting the output from one preamp to multiple power amplifiers, or switching the source of a tuner or player. OFC internal wiring material is used. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Maintenance information: 2026.6.3 continuity confirmed
Accessories: none
Main specifications: W170 x H50 x D120 mm weight 0.7 kg
A Technica headshell with a dazzling gold shine. Designed with consideration from all aspects such as materials, accuracy, sound quality, etc. (Eternity Mirai)
Maintenance information: 2026.6.3 continuity confirmed
Accessories: none
Main specifications: pure aluminum block machined handcraft shell dead weight 13.3 g
The dullness of the body is noticeable. It has been designed with consideration from all aspects such as material, accuracy, and sound quality. (Eternal Future Fight)
Maintenance information: 2026.6.3 continuity confirmed
Accessories: none
Main specifications: pure aluminum block machined handcraft shell dead weight 13.3 g
The disposal price has been reduced! (Member price not applicable) 2026/5/2 sales price 348,000 yen LUXMAN tubular preamp. Adopts a 32-point ultimate contact volume. You can enjoy a clear, glossy vacuum tube sound while retaining the soft texture of lax. The simple, easy to operate, and sophisticated design is attractive. There is a feeling of use on the exterior due to small scratches and line damage. Serial W31010020 (Tomonori Asaine)
Maintenance information: 2011.11.20 manufacturer maintained (ATT cleaning, adjustment, characteristic check)
Accessories: instruction manual
Main specifications: input impedance 170mV/40kΩ output impedance 1V (maximum 10V) /2 kΩ input terminal 6 systems output terminal systems (1 system is a TAPE output terminal) SNR 98dB W438 x H155 x D428 mm weight 18 kg
Fully maintained in 2023/6. The SP-LE8T has an eye-catching antique lattice design. Although the range is moderate, it is a gem that is highly popular with vocal fans due to its good tone. The 3 kg Alnico magnet makes a firm, firm sound (Oikawa Tetsuji)
Maintenance information: 2026.6.2 operation confirmed
2023.6.1 maintenance (exterior repair/polishing/oil finish
Front and rear baffle repair and painting. Lattice repair/polishing/painting, lining replacement. Unit maintenance (edge replacement/cone paper coating)
Accessories: none
Main specifications: 1 way 1 speaker 20W 8Ω 89dB W358 x H596 x D300 mm 18.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2026/5/5 sales price 39,800 yen Details unknown, but the cabinet has been replaced with a brown veneer one. A high-class player developed with an emphasis on the three points of accurate rotation, high sensitivity, and blocking of harmful vibrations. The product also has a high degree of perfection and sharp YAMAHA sound. Ergonomically operated, mania-like arms and design. It reminds me once again of the fun of using them one by one. There is a crack in the plastic part of the armrest (Takahashi Nobuyuki)
Maintenance information: 2026.5.5 operation confirmed
Accessories: none
Main specifications: Direct drive 33/45 rotation compatible cartridge dead weight 2 to 16 g W470 x H155 x D378 mm 14 kg
It is the successor to MUSICAL FIDELITY's bestseller “A1.” The design is being upgraded while following the characteristics of the A1. The sound is bright and crisp for an English product. There is a slight feeling of use on the exterior, such as dullness and small scratches (Kanai Hidetsugu)
Maintenance information: 2026.6.1 operation confirmed
Accessories: instruction manual, power cable
Main specifications: Complementary configuration with 2 power MOS-FET stages 25W+25W (8 ohms) outer dimensions W440 mm x H 95 mm x D340 mm weight 9.5 kg
The price has been drastically reduced. 2026/5/17 sales price 298,000 yen, 55 electrolytic capacitors have been replaced and maintained! Lux tubular pre-main amplifier. It is designed to look like separate amplifiers combined into one body. Since the 6550 is built in, I imagine a powerful sound, but since the power is reduced, you can enjoy a thick, glossy sound (Sasaki Shota)
Maintenance Information: 2026.5.17 Maintained (Degraded Electrolytic Capacitor Replacement (55 in Power Supply Unit, Power Amplifier Unit, Phono Equalizer Unit, Tone and Buff Amp Section) Lever Switch Partial Disconnect Cleaning (Turnover Frequncy Switch/Filter/Mode/Monitor/Input-Selector Switch) Constant Voltage Circuit Resistance Disconnection Exchange (x2) Tone Balance Main Volume disassembly contact cleaning. (Operation point check and adjustment and sound output test after the above treatment)
Accessories: copy of the manual
Main specifications: 32W+32W (8Ω) vacuum tube 6550, 6CG7, 12AX7A W493 x H170 x D477 mm 25 kg
Maintained! 100V specification. EL34 push-pull mono power amplifier for German Klang Film theaters. This model is characterized by a natural yet extremely deep sound, and I especially want to play it in combination with vintage speakers such as Eurodyne. There are scratches and dullness on the chassis*The output is designed for 16 ohms only (Shota Sasaki)
Maintenance information: 2026.5.30 maintained (◎ common · Pegel disassembly and cleaning repair · Bias readjustment · vacuum tube socket and RCA jack caulking repair ◎ No. 150514 · vacuum tube ECC40 noise exchange · vacuum tube EL34 strain replacement (2026.4.18 supplies arrived) · resistance 3W deterioration replacement x 2 ◎ No. 150022 · resistance 1W deterioration replacement)
Accessories: none
Main specifications: 100V specification rated output 40W+40W output tube EL34 push pull W513 x H180 x D275 mm 14.6 kg (actual measurement)
The disposal price has been reduced! (Member prices are not applicable) 2026/4/18 sales price 89,800 yen ※The display has LCD burns due to deterioration, so it is cheap. This is a black model that has upgraded the DELA N1A/N1Z, which was announced and sold as the industry's first “audio NAS,” and improved commerciality. Equipped with a dedicated USB-DAC connection terminal, the rear design has been renewed. In addition to being equipped with a 60W high-capacity power supply unit, a newly developed high-capacity capacitor bank is mounted on the rear stage of the power supply unit. The sound quality has been improved by mounting a newly selected 3.5-inch quiet drive floating on a silicon bushing. Serial 40300170100486 (Fujisawa Yukishi)
Maintenance information: 2026.4.18 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: storage capacity 2TB (2TBHHD x 1) input/output terminal USB 3.0 x 3 (import/capacity expansion/backup) USB 2.0 x 1 (for USB-DAC connection) RJ45 x 2 (router connection/network player) compatible file format WAV · AIFF · FLAC · ALAC · DSF · DFF sample frequency 44.1/88.2/176.4/352.8/48/96/192/384 kHz (PCM) 2.8/5.6/11.3 MHz (DSD) compatible number of bits 16 to 32 bits (PCM) W436 x H70 x D352 mm weight 7 kg
Comes with a stand. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. There are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2026.5.31 operation confirmed
Accessories: stand
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
Maintained including replacement of 3 capacitors. Domestic band specification. A dedicated FM tuner with a design similar to the compact Quad 33 preamp. The design has a good sense of style, and allows you to clearly listen to a comfortable range without pursuing a sense of range. There is some rust on the top plate (Oikawa Tetsuji)
Maintenance information: 2026.5.31 Maintained (internal check, power supply filter C replacement. (Other f covers, sensitivity check → OK)
Accessories: DIN-RCA cable, power cable
Main specifications: W250 × H92 × D150 mm 3 kg
Micro headshell I think it came with the MR-411. This headshell has a simple design and is easy to use (Takahashi Nobuyuki)
Maintenance information: 2026.5.30 continuity confirmed
Accessories: none
Main specifications: dead weight 10g (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2026/3/30 sales price 35,000 yen*Currently sold. Bose Acoustimass 5 Series V stereo speaker system It is composed of a small satellite speaker Direct/Reactive Series II and a subwoofer Acoustimass5 module, making playback more realistic than the previous model. Satellite speakers are designed to be combined with flat screen televisions, have a more sophisticated impression, and can also be mounted on a wall. There are no visible scratches on the exterior, etc., and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2026.3.29 Operation confirmed
Accessories: power cable
Main specifications: Acoustimass 5: W192 × H355 × D485 mm 8.5 kg Direct/Intake Series 2: W83 × H190 × D88 mm 1 kg
The price has been drastically reduced! 2026/5/26 sales price 148,000 yen Maintained! The model that started the KENWOOD brand. A pre-main amplifier with strong driving power and transparency due to thorough non-magnetization and a separate power supply unit. It has a firm sense of stability and plays a clean, clear sound. The unique design is also highly popular. Serial 01010182 (Fujisawa Yukishi)
Maintenance information: 2026.5.25 maintained (replacement with volume replacement, replacement of OUTPUT switch, adhesive fixation due to cracking on back, replacement of other speaker relay deterioration, replacement of 6 small INPUT relays, replacement of 4 broken display lamps, replacement of 4 semi-fixed VR locations for BIAS adjustment, other loudness SW, RECOUTSW decomposition, polishing, cleaning grease application, 7 other capacitors, etc. DC balance bias adjustments, each (Input/output terminal sound check, input/output RCA terminal cleaning)
Accessories: No accessories
Main specifications: rated output 100W+100W (8Ω) main unit W440 × H156 × D452 mm 9.5 kg power supply unit W170 × H156 × D403 mm 17.5 kg
The price has been reduced. 2026/5/26 sales price 59,800 yen An analog FM tuner that uses a triple air varicon from the first Midnight Blue Series. From its small size, it reproduces reliable sound quality with a sense of reality. The sophisticated design is also attractive. The exterior is dull and has a feeling of use. Serial 189246 (Murakoshi Yoichi)
Maintenance information: 2026.5.26 sound output confirmed
Accessories: power cord
Main specifications: FM tuner reception frequency/76 to 90 MHz antenna input/unbalanced 75Ω (F connector) x 1, balanced 300Ω (terminal block) x 1 W123 x H96 x D206 mm 1.7 kg
Comes with original box Denon's current CD player! Denon-like designs are alive and well. It's an impressive player with an impressive amount of information and clear sound, supported by a sturdy body. It demonstrates good cost performance that is comparable to advanced models. There is a noticeable linear stain on the top surface. Serial DCQY042500232 (Murakoshi Yoichi)
Maintenance information: 2026.5.29 sound output confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: Playback frequency range 2 Hz to 100 kHz W434 x H138 x D405 mm weight 16.8 kg
HDMI cable 8.0 m This is an initial HDMI cable with a high quality design typical of SUPRA. Although it is a model from the 720p to 1080i era, its sharp image expression and clear sound transmission are attractive. It is well-built and has a sense of stability typical of high-grade HDMI at the time. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance Information: Continuity Unconfirmed
Accessories: none
The disposal price has been reduced! Member prices are not applicable. 2026/5/8 network audio player with sales price of 79,800 yen. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. Externally, there are insulator marks on the top plate. Serial 1247668 (Tamura Eiji)
Maintenance information: 2026.5.8 operation confirmed (software 4.116.588)
Accessories: remote control, power cable
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg