* Although it can be operated with a remote control, it is inexpensive because it makes abnormal noise when operating the volume, and is currently sold. Entry machine for Marantz primain amplifiers. You can enjoy good sound in a compact size with a smart design and well-balanced sound quality. There are scratches around the volume (Oikawa Tetsuji)
Maintenance information: 2024.4.1 operation confirmed (can be operated with a remote control, but it makes an abnormal noise when operating the volume)
Accessories: remote control, instruction manual
Main specifications: rated output 40W+40W (8Ω) line input/3 systems (CD, TUNER, AUX/DVD), tape input/output/2 systems (RECORDER 2 systems) dimensions W440 x H117 x D341 mm weight 6.6 kg
A low price pre-main amplifier that allows you to enjoy Marantz-like sound. How about it as an introduction to audio or as a subsystem, etc. There is a feeling of use such as scratches and dullness
Maintenance information: 2024.4.1 operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: W440×H124×D340 mm 7.5 kg
The price has been drastically reduced. 2024/2/18 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. Serial AWY15180500756 There are scratches on the top plate on the exterior (Hiura Katsuji)
Maintenance information: 2024.2.18 Operation confirmed
Accessories: remote control power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/14 sales price 198,000 yen This model takes the configuration of the flagship 7S1. The quality of the sound has improved compared to the predecessor, and in particular, the thickness of the sound has increased from low to medium, making it a well-balanced sound. The clear and clean spatial expression and smooth, gentle mid-high sound are attractive. There is a scratch on the top plate. Serial 20011208001208 (Fujisawa Yukishi)
Maintenance information: 2024.4.14 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: original mechanical module SACDM-1 1 bit DSD SEIKO NPC SM5866AS D/A converter with external clock terminal W440 x H127 x D413 mm 16.5 kg
The core model for Marantz SACD players. Although it is an entry model, it has a high S/N feel typical of the company's products, and the sound quality is excellent for listening for a long time. It is an attractive player with a sense of quality in the mid to high range with a fine particle feel. The exterior has a feeling of use such as dullness and small scratches. Serial 20000540002323 (Takahashi Nobuyuki)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: SACD/CD player, 1 analog output system (RCA), 2 digital output systems (coaxial x 1, optical x 1), digital filter, switch to 3 modes, W440 x H123 x D419 mm, 13.5 kg
Maintenance is being carried out in 2022. A reprint of Marantz's famous model 7. In addition to the good graininess of the sound and the glossy and rich sound quality, it brilliantly inherits the good quality of the mid-range. You can enjoy a feeling that transcends ages and genres. The exterior has dullness and scratches. Serial F020306 (Murakoshi Yoichi)
Maintenance information: 2022.3.22 maintenance (implementation of measures to prevent the rear input terminal and chassis earth from floating, hot side loosening, contact pressure correction. Clean each vacuum tube pin and socket contact. (Volume VR part ground wire deviation correction, wood case stop screw installation)
Accessories: instruction manual (copy)
Main specifications: used vacuum tube 12AX7×6 W455×H178×D261mm 8kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/11 sales price 99,800 yen This is the ultimate version of the P-1. It is a pure A grade specification, which is rare for a headphone amplifier, and you can enjoy more detailed and clear playback sound. There is a thin line scratch on the top plate and a small scratch on the upper front, but there are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.1.11 Sound output operation confirmed
Accessories: copy of manual, power cable
Main specifications: 2W+2W (8Ω) 1W+1W (16Ω) high sound quality feedback circuit “ODNF3.0A”, 2 headphone outputs, 1 RCA/XLR input each, W440 x H82 x D408 mm 8.3 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
The price has been reduced! 2024/4/25 sales price 19,800 yen ※There is no problem with operation, but it is cheap because there is a lot of rust. LUXMAN's thin synthesizer tuner. The design matches the Luxman Primaine from the 80s, and has a nostalgic, nostalgic atmosphere. The exterior has dullness, small scratches, and rust, and there is a feeling of use, as the power cable has been changed to an external product. Serial G2701694 (Hiroki Aso)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: FM/AM tuner FM tuner part S/N stereo 80dB selectivity NARROW (±300kHz) 80dB
WIDE (±400kHz) 65dB AM tuner part S/N50dB dimensions W453 x H87 x D344 mm weight 4.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/9 sales price 138,000 yen ※It is cheap because the condition is not good. Next-generation model of the L-550, a famous pure Class A amplifier that has been maintained by the manufacturer (*PHONO1 cannot be used due to a broken equalizer board). The very smooth, deafening warm color sound perfectly matches the delicate sound quality of pure A grade. It also has a reputation for analog sound, and thick sound quality can be obtained with both MM/MC. There is a feeling of use due to appearance, dullness, abrasions, scratches, paint deterioration, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.9 manufacturer maintenance completed (equalizer selector switch disassembly cleaning, correction due to broken equalizer board, other contact cleaning, general adjustment*PHONO1 cannot be used due to broken equalizer board)
Accessories: copy of instruction manual
Main specifications: pure A grade 50W+50W (8Ω) PHONO (MM/MC) PHONO/CD straight circuit system W453 x H174 x D470 mm weight 20 kg
The A2500 is a tube type power amplifier kit that has been replaced with speaker terminals that are easy to use even for beginners. 6AQ8 for the first stage and 12AU7 for the phase reversal stage both use triodes. Since triodes are used across all stages, the sound is taut and bright, with excellent nude characteristics. The exterior has dullness over time, rust, and small scratches. Serial 560561 (Miura Kimiya)
Maintenance information: 2018.4.28 Maintained (printed circuit board resistor replaced. (Adjustment characteristics check OK) 2014.11.21 maintenance completed (input VR, vacuum tube socket, coupling capacitor, SP terminal, BIAS DC BAL, semi-VR, each deterioration exchange, adjustment, characteristic check OK)
Accessories: instruction manual
Main specifications: 6 RA8 push-pull 6 RA8 x 4/12 AU7 x 2/6AQ8 10W+10W W410 x H145 (with hood) x D190 mm 9.6 kg
Output transparent sale push pull output 35W primary: 8kΩ secondary: 4-8-16Ω usage: 7189 app, etc. W82 x H72 x D82 mm approx. 1.6 kg/piece (actual measurement, not including protrusions) The plate is often scratched, printing is erased a lot, and there are paint floats due to rust in places (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The price has been reduced! 2024/4/23 sales price 99,800 yen genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The disposal price has been reduced! (Member prices are not applicable) 2023/4/16 sales price 138,000 yen genuine Rin Japan product. The Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are no noticeable scratches on the exterior. Serial 1324171 (Fujisawa Yukishi)
Maintenance information: 2024.4.16 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord, original box
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/25 sales price 118,000 yen LINN network player with built-in amplifier. It is equipped with an Ethernet terminal that completes the system simply by connecting a speaker, and supports WAV, FLAC, AIFF, Apple Lossless, AAC, and MP3 playback via LAN. In addition, it is equipped with 1 optical digital and 1 coaxial digital audio input and 1 RCA analog audio input. It can also be connected to devices other than the built-in player and used as a digital premain amplifier. *The volume will be adjusted on the computer. The exterior has a feeling of use such as dullness and small scratches. Serial 1298721 (Hiroki Aso)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: power cable
Main specifications: Compatible audio files: FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequency: 7.35k to 192k Compatible bits: 16 bit, 24 bit Input terminals: Ehernet Analog audio: RCA x 1 (impedance; 10 kΩ) Digital audio: RCA (SPDIF) x 1, TOSLINK (Optical) x 1 SP output: L/R x 1 (compatible with banana, bare wire, Y lug terminals) LINE Output: RCA x 1 SN Ratio: 105 dB Frequency Characteristics: 0 Hz - 30 kHz Output: 70W (4Ω) W191 x H80 x D274 mm Weight 2.65 kg
Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki)
Accessories: None
Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg
This is a large and medium speaker base using magnesium struts injected with ultra-fine sand. It also creates effective ensembles for other subwoofers. There are scratches and dullness on the exterior (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W100×D400×H300mm 8,2kg/1 bottle
Krypton speaker stand It has a simple design, and a base containing iron ball sand with the same specifications as an audio board is used as the base. The size is ideal for small speakers, etc. There are small scratches on the exterior (Tamura Eiji)
Accessories: instruction manual
Main specifications: W249 x H620 x D325 mm Weight 7.2 kg/unit
A speaker stand with a height of about 20 cm. It is recommended for those who want to build a desktop or compact audio system. The exterior has dullness and small scratches (Tamura Eiji)
Accessories: No accessories
Main specifications: top plate 240 x 210 mm thickness 2.3 mm bottom plate 240 x 210 mm thickness 2.8 mm load capacity 12 kg size W210 x H206 x D 240 mm weight 2.2 kg
A rare, early-stage pottery model! It is an interesting speaker with a strong element of play, which is very popular as a second system as an interior decoration. The shape changes depending on the generation. There are small scratches over time, but there are no noticeable scars (Sasaki Shota)
Maintenance information: 2024.4.27 sound output operation confirmed
Accessories: nothing
Main specifications: Jordan Watts module, caliber 10 cm, single cone, full range, 8 ohm, W172 x H155 x D65 mm, 9.0 kg/book
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! An original product. A floor-type enclosure that uses a rear loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine)
Accessories: MA15 woofer grill net
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
※1 bottle only. Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance with various woofers and tweeters (Daiki Goto)
Maintenance information: 2024.4.23 Maintained (diaphragm installation adjustment, replacement of the following parts. DCR (54871, 5.7 ohm diaphragm, no scratches)
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
*The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. Scratches and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi)
Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.)
Accessories: No accessories
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
The price has been reduced. 2024/4/6 sales price 79,800 yen Maintained! Standard model of JBL's 1-inch driver unit. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are attractive for some input. The diaphragm is original, and there are scratches in places (Kojima Yosuke)
Maintenance information: 2024.4.6 maintained (diaphragm installation adjustment
Replace the following parts. DCR (37658/6.1 ohm diaphragm no scratch) DCR (38816/5.7 ohm diaphragm no scratch)
Accessories: none
Main specifications: 1 inch driver 500 to 20,000 Hz 8 ohms serial 37658/38816 W145 x D97 mm 5.1 kg/bottle
Center speaker using the same unit as the LS60. The luxurious 3-way specification plays a part in building a theater system. On the exterior, there is a feeling of use, such as small scratches scattered on the top plate. There are small scratches on the exterior. Serial FY00030004240 (Fujisawa Yukishi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: spike, spike base
Main specifications: 16.5cm double woofer 3-way 4-speaker impedance 6Ω playback frequency band 50-40kHz allowable input 150W dimensions W672 x H217 x D235 mm weight 14.4 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/15 sales price 79,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 53400 63923 (Tomonori Asaine)
Maintenance information: 2023.12.15 Maintained (diaphragm installation adjustment throat cleaning DCR 63923/8,3 ohm, no vibration damage
(DCR 53400/7.8Ω vibration has scratches and small dents)
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
The price has been drastically reduced! 2024/3/17 sales price 69,800 yen JBL professional tweeter. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. The exterior has dullness and small scratches due to aging. Serial 81380/52416 (Yonejima Satoshi)
Maintenance information: 2024.3.17 sweep test good
Accessories: No accessories
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
Maintained! A 1500 Hz crossover network perfect for combining the LE14A with the 175DLH and LE175. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
Refresh yourself with internal and external maintenance! A popular model with an eye-catching bright blue baffle. A titanium dome is used for the tweeter, and the sharpness in the high range is excellent. The sounds of rock, jazz, etc. are pleasant, and the sound is sharp and sharp while the bass comes out well (Sasaki Shota)
Maintenance Information: 2024.4.27 Maintained (exterior cleaning/touchup/waxed finish. Saran net cleaning/reattaching Tweeter cleaning woofer cone paper touch up ATT cleaning)
Accessories: none
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 22 kHz crossover 2 kHz/5 kHz sound pressure level 93 dB impedance 6 ohms dimensions W362 x H597 x D299 mm weight 20 kg/bottle
※It has been repainted and is inexpensive because it is in poor condition. JBL original product. A floor-type enclosure that uses a rear-loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior is scattered with chipped corners, scratches, and dullness. Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: screws
Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
Maintained! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, there is a feeling of use, such as paint peeling off and scratches scattered around. Serial 17041 17049 (Hiroki Aso)
Maintenance information: 2023.3.31 Maintained (terminal rust removal, acid wash, insulating bushing & mounting screw replacement, ATT brand new replacement, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/20 sales price 198,000 yen ※It is cheap because there is dirt, cigarette smell, and part of the stay is broken. Comes with stand 2505! 2 inch horn+ lens with huge slant plate. As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. The exterior has line scratches and paint peeling. Serial 17862, 18641 (Fujisawa Yukishi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
The price has been drastically reduced! 2024/4/25 sales price 118,000 yen ※The horn part and equalizer part have been replaced with brass ones. Comes with a horseshoe ring! 16 ohm specification A straight, carefree, and linear sound. It's great for applying sharp, edgy cymbal sounds and attack sounds. The impression is that the density has increased compared to the 8 ohm specification. The back plate is missing. The exterior has slight paint baldness and oxidation. (YONEJIMA Satoshi)
Maintenance information: 2024.4.25 Maintained (Fram pull-out wire disconnection repair (only repair only the fault location because the Fram drawer line is thin) Fram cleaning. DCR (? /6.5 ohm diaphragm no scratch) DCR (40886/6.6ohm diaphragm no scratch)
Accessories: horseshoe ring
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
The disposal price has been reduced! (Member prices are not applicable) 2024/3/2 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yonejima Satoshi)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: No accessories
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
Maintained. The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has dullness and scratches due to use over time, serial 18254 18275 (Asaine Satoshi Law)
Maintenance Information: 2024.4.16 Maintained (Screws, Insulated Washer Parts Replacement Switch Contact Cleaning)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
Set of 4 Use ICP damping spacers and IDS composites together as tuning goods to counteract speaker vibrations. *Cannot be used as a receiver for metal spikes. There are scratches and threads on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: diameter 35 mm x 3 mm (thickness)
Pair tube (checked with a tube checker) beam quadrupole. There is a tea box. Measured value 36,34/30 (rejection value) *The pair was determined based on the GM value measured by the testing machine TV-7. The ※ logo is scratched, so it's a bargain.
The price has been reduced. 2023/12/31 selling price 19,800 yen Infiniti's slightly rare center speaker. Unlike a domestically produced center speaker that mainly plays the vocal band, you can feel the nuance of a Scandinavian speaker that plays as if it were floating in space. There are small scratches on the exterior, and the saran net is partially torn (Oikawa Tetsuji)
Maintenance information: 2023.12.31 operation confirmed
Accessories: none
Main specifications: 3 way 4 speakers 6 ohms W509 x H230 x H270 mm 12.5 kg
Sound can be produced, but there is uneven rotation and sound shake, so it will be sold as it is. The sound box is HMV No.4. The volume is not large, but you can hear an elegant tone in the high range with fine grain. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka)
Maintenance information: 2021.11.28 Operation confirmed
Accessories: handle
Main specifications: W290 × H150 × D425mm 7.0kg (actual measurement)
The price has been drastically reduced. 2024/4/22 sales price 228,000 yen The HL series has an attractive smooth, beautiful sound unique to British BBC monitors. As expected, there is plenty of noise regardless of genre, from jazz and classical music to rock and pop music. From the design, which has just the right amount of sound of the box and the presence of guests, you can hear an unrivaled beautiful sound. It is in good condition without any major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Accessories: none
Main specifications: 2-way 2-speaker bass reflex system unit, 20 cm cone type for low range, 2.5 cm dome type playback frequency band 43 Hz to 20 kHz output sound pressure level 86 dB impedance 8 Ω maximum input 150 W W271 x H520 x D315 mm 12.5 kg
This is only the top plate part of the company's GT-9721. There are scratches, stains, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W1165 x H45 x D580 mm
The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji)
Accessories: fastener
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
Hamilex speaker stand Not only is the small speaker, but it also has a sturdy construction with a load capacity of 50 kg. There is a feeling of use on the exterior due to small scratches etc. (Tomoho Asae)
Accessories: none
Main specifications: load capacity approx. 50 kg, top plate W200 x D240 mm, overall W240 x H450 x D300 mm, weight 4 kg/1 unit