It is an exquisitely crafted enclosure similar to JBL's EC-138. The size and compatible units remain the same, but exterior corner specifications and sound absorbing materials are different from the original. The construction itself is well-built, perfect for those who like to make their own. There are scratches and bumps on the exterior. (TAMURA Eiji)
Accessories: saran net, MA-15 (8 pieces)
Main specifications: W555 × H845 × D430 mm
The disposal price has been reduced! Member prices are not applicable. 2025/12/11 sales price 250,000 yen Maintained! This is the 2010 version of the SV-2. This time it will be the 211 model. Compared to the 2007 model, it has a plump and glossy sound like a vacuum tube amplifier. There are also 4 input systems, so it's easy to use. There are scratches and paint peeling on the exterior. (TAMURA Eiji)
Maintenance information: 2025.12.11 Maintained (input volume and function switch replacement, bonnet fixture, vacuum tube pin cleaning, solder correction. ※Bias check Each input and output sound was checked. Output approx. 9 W (8 ohms))
Accessories: instruction manual, power cable, bonnet
Main specifications: 4 input systems with volume W410 x D408 x H251 mm weight 35 kg
The price has been reduced! 2025/12/6 sales price 99,800 yen ※The front of the rider weight has been changed to external parts. Maintained! The sharp, well-sharpened followability and solid tone due to the metallic knife edge are attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. (FUJISAWA KOSHI)
Maintenance information: Maintained at 2025.9.6 Rizaye (elastic coupling rubber x 1 replaced. Main unit disassembly check and cleaning. (Inspection and adjustment of each part and operation check)
Accessories: connection cord
Main specifications: short arm static balance type total length 265 mm overhang 15 mm needle pressure (when 1 rider weight is attached) 1 memory 0.25 g steps/0 g to maximum 2.5 g needle pressure (when 2 rider weights are attached) 1 memory 0.5 steps/0 g to maximum 5 g cartridge weight up to 28 g
The price has been reduced! 2025/11/18 sales price 18,000 yen This is a stand dedicated to the company's speaker ELECTRA series. Of course, it can also be used with other speakers. How about small speakers, medium speakers, etc. The struts are filled with sand and can also be expected to have a damping effect. Scratches and peeling scratches can be seen. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W270 x H610 x D310 mm top plate 180 x 250 mm weight 12.3 kg (actual measurement)
The price has been drastically reduced! 2025/12/1 sales price 49,800 yen Maintenance completed in 2022/5! Phono motors only. This is Denon's popular phono motor DP-6000. Rotational blurring is extremely low, and it has a reputation for its high accuracy. There are small scratches on the exterior. Serial 186629 (Fujisawa Yukishi)
Maintenance information: 2022.5.2 maintained (migration occurrence Tr, full IC replacement, electrolytic capacitor replacement, default speed reset, running test)
Accessories: No accessories
Main specifications: Phase-locked servo type direct drive (crystal control) AC servo motor turntable is made of die-cast aluminum with a diameter of 312 mm, compatible with 33 and 45 degrees of rotation, can be adjusted quickly, weight 8.8 kg
The disposal price has been reduced! Member prices are not applicable. 2025/12/12 sales price 1,480,000 yen This is the current Marantz reference SACD player that will be in stock for the first time at Hi-Fi Hall. Equipped with a new-generation HDAM circuit. It is a model that can be said to be the culmination of the past, and incorporates all Marantz technology. Sound that is faithful to the original sound is reproduced while keeping the breadth and high resolution intact. It's a player who brilliantly recreates a vast stage when you close your eyes. Serial MCPC112400004 (Tamura Eiji)
Maintenance information: 2025.12.12 operation confirmed
Accessories: instruction manual, original box, remote control, connection cable
Main specifications: Output terminals: analog unbalance x 1, analog unbalance x 1, coaxial digital x 1, headphone x 1, headphone x 1 input terminals: coaxial digital x 1, optical digital x 1, USB-B x 1, W440 x H192 x D442 mm, weight 33.0 kg
The disposal price has been reduced! Member prices are not applicable. 2025/12/8 sales price 118,000 yen Hi-Fi Hall first arrival! The top model in the Q series. The color is satin white. 2.5 way bass reflex type equipped with the Uni-Q mid-range. It is a speaker that combines depth and clarity and is compatible with both music and movies. A bruise and other minor injuries can be seen on the lower front on one side. Serial QQ95003672J38N2G, QQ95003679J38N2G (Fujisawa Yukishi)
Maintenance information: 2025.12.8 operation confirmed
Accessories: spikes ※ optional saran net is not included
Main specifications: 2.5 way speaker efficiency 91 dB frequency characteristics 44 Hz to 28 kHz 8 ohms W244 x H1,026 x D328 mm (main unit only) weight 20.6 kg
The price has been drastically reduced! 2025/12/12 sales price 178,000 yen Maintained! Mcintosh tube FM tuner MR71 The sound unique to FM broadcasts has an appeal different from CDs and records, and the FM sound with a thick, sweet Macintosh sound is exceptional. The exterior has oxidation, scratches, etc. Serial 3181 (Fujisawa Yukishi)
Maintenance information: 2025.12.12 Maintained (tube all pin polishing. Replace the filter capacitor in the power supply section. Output coupling capacitor replacement. F cover sensitivity readjusted. internal and external cleaning)
Accessories: No accessories
Main specifications: frequency characteristics 20Hz to 20kHz SNR 70dB separation 35dB harmonic distortion ratio 0.5% output level 2.5V W407 × H138 × D335 mm weight 14.5 kg
The price has been drastically reduced! 2025/11/20 sales price 99,800 yen Maintained! JBL professional 2 inch screwdriver. It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior is dull and dirty. Serial 023492/023566 (Tamura Eiji)
Maintenance information: 2025.11.20 Maintained (vibration plate installation adjustment, insulation bushing replacement. Vibrating plate mounting screw replacement. Ultrasonic cleaning of terminals. Pad dampener replacement. DCR (023492/7.4Ω vibrating plate no scratch) (023566/8.2 ohm vibrating plate no scratch)
Accessories: No accessories
Main specifications: 2 inch driver, slot diameter: 5 cm; allowable input: 100 W; sound pressure level: 111 dB; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/bottle
The disposal price has been reduced! (Member prices are not applicable) 2025/11/5 sales price 148,000 yen ※50 Hz specification 33 rotations only. armless model. It is a double belt drive to isolate the vibration of the motor. There are belts on the back and front sides, and belts are used from the motor to the pulley, and belts are also used for the pulley → platter. The hole diameter of the arm will be 29mm. The exterior has dirt, threads, and writing on the plate. Serial 8982 (Tamura Eiji)
Maintenance information: 2025.11.5 rotation confirmed (it will flow slightly, but this is the current state)
Accessories: belt
Main specifications: hole diameter 29mm W502 x H250 x D453 mm
The price has been reduced! 2025/12/7 Denon premium analog player with sales price of 79,800 yen. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. Record playback with excellent stability and high freshness is attractive. There are threads on the dust cover and slight oxidation on the turntable. Serial 3076300136 (Fujisawa Yukishi)
Maintenance information: 2025.12.5 operation confirmed
Accessories: copy of instruction manual, power cord, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
The price has been reduced! 2025/12/16 sales price 1,180,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled! Officially imported by TEAC. Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid to low range. Serial 001568/001574 (Yonejima Satoshi)
Maintenance information: 2025.12.16 Maintained (unit maintenance: low range side edge softening treatment/magnetic circuit gap cleaning/center adjustment, high frequency side magnetic circuit gap cleaning center adjustment. Network maintenance: frequency characteristics check, ATT cleaning, faston terminal replacement, terminal cleaning. Exterior cleaning/simple repairs. Saran net cleaning/repasting, frame repair)
Accessories: saran net
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
The price has been drastically reduced! 2025/12/15 sales price 1,200,000 yen Maintained! It's a crossbow preamp that follows the Cello ENCORE 1MΩ flow. The sound is innocent yet supple and nostalgic. It is a valuable car where you can experience the awesomeness of the infinitely neutral and transparent sound that VIOLA promotes without any coloring. There are small scratches, dullness, and a feeling of use. Serial 0087 (Fujisawa Yukishi)
Maintenance information: 2025.12.15 Maintained (volume disassembly contacts have been cleaned. The GAIN volume shaft has a lot of rattling, so I adjusted the clearance between the knobs and panels. The power connector receiving screw has been attached. Each input/output operation was checked.)
Accessories: connection cord, power cord
Main specifications: fixed resistance switching type analog amplifier circuit module equipped with 4 output systems (XLR x 2, Fischer x 1, RCA x 1), 6 input systems (XLR x 1, Fischer x 1, RCA x 4) TAPE OUT (RCA x 1) main body W445 x H110 x D430 mm 9 kg power supply unit W225 x H110 x D400 mm 7.6 kg
This is an Accuphase digital channel divider. It is equipped with 4 channels (4 way) as standard specifications, and a higher order filter with even fewer errors has been achieved by adopting a high-accuracy, high-speed DSP. The ease of operation, including connectivity and ease of use, is also one of its attractions. The exterior is good with no conspicuous scratches. Serial A1Y063 (Fujisawa Yukishi)
Maintenance information: 2025.12.17 operation confirmed
Accessories: power cord
Main Specifications: Digital Inputs: COAXIAL, OPTICAL, HS-LINK Analog Inputs: RCA, XLR Digital Outputs: COAXIAL, HS-LINK Frequency Characteristics: 2.0 to 50,000 Hz Slope Characteristics: 6dB, 12dB, 18dB, 24dB, 48dB, 96dB W465 x H151 x D396mm 14.7 kg
The price has been drastically reduced! 2025/12/13 sales price 188,000 yen*There are some cracks in the decorative panel. Maintenance has been completed, such as volume dismantling and cleaning, and disassembling and polishing of each switch! Following the technology at the time of development of the advanced C-2302, a balanced configuration was adopted for the advanced α-X circuit and power supply unit. The sense of strength and driving power of the highest class as a premain is attractive. There are scratches and line marks on the exterior. Serial 622093654 (Fujisawa Yukishi)
Maintenance information: 2025.12.13 Maintained (main volume dismantled and cleaned. Switch disassembly and polishing (input selector, power amplifier direct, source direct, reck-out, turnover, tone, loudness, muting, processor, MM/ MC). Replace output relays and headphone relays. Balance input terminal replacement. Power supply transistor replacement. Main amplifier section volume adjustment, diode replacement. Solder repair. (Interior and exterior inspection cleaning, DC, bias adjustment, operation inspection)
Accessories: No accessories
Main specifications: 160W+160W (8Ω) 190W+190W (6Ω) phono equipped with advanced α-x balance circuit (MM/MC switching) dimensions W460 x H161 x D446 mm weight 33 kg
The disposal price has been reduced! (Member discounts are not applicable) 2025/9/23 sales price 148,000 yen Exterior cleaned! Sony's masterpiece. A car that plays everything from classical music to jazz in a fresh, natural sound field. It is a model that is large, powerful enough, and has high cost performance. While the low frequencies are tight, there is a firm sense of volume. A 30mm thick hardwood particle board with a double layer structure is used as the enclosure baffle board. There are scatters of scratches on the top plate. (FUJISAWA KOSHI)
Maintenance information: 2025.9.22 exterior cleaned
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system floor type 30 Hz to 20,000 Hz 8 ohm cross 550 Hz, 4,500 Hz W510 x H940 x D445 mm 48 kg
※1 bottle only. It is cheap because there are parts that have collapsed and become brittle in the exterior. There are few Altec 1.5 inch mantalay horns in stock. There are some cracks and collapses on the exterior. Serial 1014 (Tamura Eiji)
Accessories: none
Main specifications: recommended crossover frequency 500 Hz directivity: horizontal 40° vertical 20° throttle diameter 3.56 cm W532 x H367 x D736 mm weight 6.0 kg
This is an Altec 1.5 inch horn such as 288. It's a sound with vertical momentum, and although it's not a wide range, the energetic sound is exquisite. There are scratches on the exterior. Serial 3268/3657 (Tamura Eiji)
Accessories: none
Main Specifications: Mantaray Horn Polyester Fiberglass Recommended Crossover 500 Hz Compatible Units: 288 · 291 Series W324 × H327 × D317 mm 1.6 kg
※1 bottle only. Front load enclosure familiar from A7 etc. What about the mono group? The exterior has several holes for peeling paint and fixing to the top plate. (TAMURA Eiji)
Accessories: none
Main specifications: bass reflex type W755 x H1062 x D610 mm, weight approx. 55 kg
※1 bottle only. A ferrite woofer that was assembled with the late ALTEC A5 and A7. The dry, tense mids and bass unique to ALTEC are attractive. There are dirt and threads on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2025.12.18 sweep check OK
Accessories: none
Main specifications: 38cm woofer, ferrite magnet, 8 ohms, 104.7 dB, frequency characteristics, 50 to 4,000 Hz, aluminum ribbon, edgewise, rolled voice coil, 13.6 kg
Altec 1.5" ferrite driver. A clear and powerful American sound. The wide-area characteristics unique to Altech resonate comfortably while being rounded and stretched quickly. Both diaphragms have a logo. The exterior is scratched, dull, and has a feeling of use. Serial 31200107 (Yonejima Satoshi)
Maintenance information: 2025.12.18 sweep check is good
Accessories: No accessories
Main specifications: 1.5 inch coaxial unit, 8 ohms, playback frequency band, 500 to 15,000 Hz, maximum input, 100 W, 13.8 kg
Altec 1.5" ferrite driver. A clear and powerful American sound. The wide-area characteristics unique to Altech resonate comfortably while being rounded and stretched quickly. Both diaphragms have a logo. The exterior is scratched and dull, and there is a feeling of use (Yonejima Satoshi)
Maintenance information: 2025.12.18 sweep check good
Accessories: No accessories
Main specifications: 1.5 inch coaxial unit, 8 ohms, playback frequency band, 500 to 15,000 Hz, maximum input, 100 W, 13.8 kg
※1 bottle only. The network used by Altec's A7. How about as a sub or for repairs? (TAMURA Eiji)
Maintenance information: 2025.12.18 sound output confirmed
Accessories: none
Main specifications: cross 500Hz W190 × H110 × D160 mm
※1 bottle only. It does not spread like a large horn, but it is characterized by a mid to high range that stretches up without stress. This unit is powerful, has good response, and has a gorgeous sound in the mid to high range. On the exterior, there is dullness on the corn paper (Yonejima Satoshi)
Maintenance information: 2025.12.18 sweep check is good
Accessories: No accessories
Key Specifications: Coaxial 2 Way 12 inch Ferrite Magnet 8 Ohm Crossover 1500 Hz Efficiency 98.5 dB 11.2 kg
*Currently sold. 16 cm Fostex woofer It is a woofer that responds quickly and is sharp, can be combined with a backroad, and can also be combined with a bass reflex, so those who make their own can enjoy a variety of things. The exterior is good (Yonejima Satoshi)
Maintenance information: 2025.12.17 sweep test is good
Accessories: instruction manual, original box
Main specifications: impedance 8 ohms playback frequency band 40 Hz to 9 kHz output sound pressure level 89dB maximum input 100W crossover 3000 Hz baffle aperture diameter 151 mm screw pitch (diagonal) 174 mm weight 3.9 kg
The disposal price has been reduced! Member prices are not applicable. 2025/12/10 sales price 2,780,000 yen with dedicated stand! The color is the special color Bororo Red. It is a brand founded by the designer of the first generation Nautilus, and the visual impression is somewhat reminiscent of Nautilus. Of course, the sound is also beautiful, like a Nautilus, and it beautifully expresses a large space. It's a speaker where you can even feel the singer's real breath. There are small scratches on the exterior. Serial 3993/3994 (Tamura Eiji)
Maintenance information: 2025.12.10 sweep check OK
Accessories: dedicated stand (https://stella-inc.com/vivid/page/base_g3g4.html)、スパイク、スパイク受け、取扱説明書、ジャンパーケーブル
Main specifications: 4 way 5 speaker tube absorber bass reflex system 88 dB 6 ohm frequency band 29 to 36,000 Hz maximum allowable input 800 W (music power) W360 x H1383 x D638 mm weight approx. 55 kg stand part: W330 x H160 x D460 mm weight approx. 12 kg