The price has been reduced. 2024/5/5 sales price 21,800 yen ※6 month warranty. Although it is a small size close to ZENSOR PICO, the sound image expression and good response that do not make you feel a sense of size are perfect for current trending sounds. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2 way 6Ω 83dB W140 × H237 × D195 mm 2.6 kg
※Since it is cheap, it will be handed over as is. This is a compact Chinese vacuum tube amplifier. It comes with a VU meter, so you can enjoy looking at it. The size is designed to be just right for desktops, etc. There is a thread on the exterior (Tamura Eiji)
Maintenance information: 2024.5.16 Operation confirmed
Accessories: none
Main specifications: Vacuum tubes used: 6SN7GT x 2, 5Z4P x 1, 6N1N x 4, W260 x H145 x D253 mm, weight 5.5 kg
Speaker cable can be replaced with a 2.0m pair end banana plug Y lug. Uses G.S. #79nano3のアッパーバージョンとして企画され、導体にPC -OCC speaker cable impregnated with 3 times the concentration of gold/silver colloid liquid in a high sound quality OFC line (Tamura Eiji)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: Y lug
※1 bottle only. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There are small scratches and dullness on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2024.5.8 oscillator check is good
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
※1 bottle only. Fostex 1dB step transformer attenuator. It uses a large single-turn transformer and a highly reliable rotary switch with low contact resistance. The input/output terminals are tight-fitting. The exterior has oxidation, dullness, etc. (Tamura Eiji)
Maintenance information: 2024.5.8 operation confirmed
Accessories: none
Main specifications: 8Ω allowable input 100W (when using a network) attenuation 0 to 12 dB size W88 x H90 x D170 mm approx. 970 g
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/13 sales price 30,000 yen model number, convenient for small amplifiers, etc. such as unspecified steel satin finish audio racks, spike specification LINN products, etc. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size W395 x H540 x D395 mm shelf board 350 x 350 mm between shelves 105 mm weight 11.7 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/6 sales price 29,800 yen 6 month guarantee. Fourth generation model of Victor's masterpiece speaker SX-500 series representing the 90s. Alnico magnets are used in all units, and the woofer unit has particularly excellent low-level reproducibility, contributing to improved clarity and good tone during quiet sounds. The exterior has scratches and dullness over time. Serial 10800021 (Yamato Yuki)
Maintenance information: 2024.5.6 sweep test is good
Accessories: none
Main specifications: 2 way, 2 speakers, sealed system, bookshelf type, anti-magnetic type, 20 cm cone type for low range/3.5 cm dome type impedance 6 Ω for high range, output sound pressure level 90 dB, W270 x H454 x D 293 mm, weight 12.5 kg/book
※Since there is a lot of deterioration in the exterior, it is inexpensive. Popular DIATONE bookshelf Metallic sounds such as wind instruments and hi-hats on drums resonate comfortably in the crisp high range, and the low frequencies are more powerful than their size. In addition to the exterior, there are many peeling veneers, and a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2-way speaker, bookshelf type, bass reflex, efficiency 89dB, impedance, 6Ω, size, W212 x H349 x D220 mm, weight 7 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: needle cover, case
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
※It is inexpensive because there are creases on the saran net and veneer. A cost-effective bookshelf speaker from CELECTION in the UK. The large but well-organized and smooth sound quality makes you feel the sense unique to CELETION. The luster of the strings and vocals is remarkable. As for the exterior, there are creases and shrinkage on the decorative sheet. Serial 435666, 435678 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers impedance 8 ohms output sound pressure level 86 db size W185 x H310 x D 215 mm weight 5 kg
Mono exclusive MC cartridge. It's not flashy, but it stretches and makes a gentle sound that is pleasant. There is a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.5.13 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.5 mV needle pressure 2.5 to 4.5 g dead weight 5 g
Q ACOUSTICS 2-WAY BOOKSHELF. Once the setting is decided, you can enjoy a variety of music genres with a sense of scale that makes you doubt the size. There are dents around the upper corner on one side, and there is slight dullness throughout (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, rubber feet
Main specifications: 2 way 6Ω 88dB W170 × H260 × D226 mm 4,6 kg
The price has been reduced. 2024/3/26 sales price 29,800 yen 2022 manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. You can see a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2022.11.5 manufacturer maintained (all defective transistors replaced. Earth wire installation operation test)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. Familiar sound with a wide range. The supple sound makes it comfortable to listen to. The exterior has a feeling of use, such as dullness on the body. Serial 4126 (Hiroki Aso)
Maintenance information: 2024.4.21 sound output confirmed
Accessories: none
Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
The disposal price has been reduced (member prices are not applicable) 2023/5/9 sales price 35,000 yen with casters. Hayami's 5-tier vertical audio rack shelf can be changed to a 16mm pitch. The 4-way open structure also has excellent heat dissipation. Sound countermeasures are also good with heavy weight MDF+particle board. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Accessories: none
Main specifications: 4 shelves, load: top plate/bottom plate 150 kg, adjustable shelf 50 kg W604H992 x D580 mm (height 1060 mm including casters), weight 58 kg
The price has been reduced! 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
RCA cable 1.0m pair revision B type signature series There is little dramatization in the tone, but you can enjoy a spectacular sound field feeling as if the speaker size has been larger by one size or more. There is dullness on the plug (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/5/3 sales price 29,800 yen A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: Playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 39,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
Sound Magic horizontal 2-tier rack. Uses 38mm diameter struts and high-compression, high-mass 19mm thick special MDF. A circular cut is applied to the back to make the cables easier to put together. The exterior has bumps, dirt, threads, etc. ※Shipping costs will be estimated separately (Fujisawa Yukishi)
Accessories: spike, spike base
Main specifications: W1,138 x H476 x D501 mm weight 28 kg load capacity 80 kg/shelf
F series tall boy speaker from British Celestion. It can be used for a wide range of purposes, from AV systems to pure audio. It is a bright tone with a pleasant drop and spread of the midrange. There is no effect on operation, but there is a dent in the mid-range center dome on one side. (FUJISAWA KOSHI)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual (English characters), saran net, spikes, jumper plates
Main specifications: 3-way bass reflex type output sound pressure level: 90db 8Ω W264 × H920 × D342 mm 20 kg
*Currently sold. Woofer edge softened A model developed with an eye on the digital age. The natural spread of sound is suitable not only for vocals, but also for classical music, etc. This is a volume-input high CP model unique to the bubble period. The exterior has a saran net hole, and the emblem is missing on one side and the other side is missing. Also, the veneer is torn. Serial 2609/12502 (Yonejima Satoshi)
Maintenance information: 2024.5.5 maintained (woofer edge softening treatment, good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed, 32 cm for the low range, 10 cm, cone type/2.5 cm for the high range, dome type frequency band 35 Hz to 30 kHz crossover 600 Hz/5 kHz sound pressure level 91 dB impedance 6 Ω dimensions W370 x H680 x D330 mm weight 21 kg/book
The price has been reduced. 2024/2/23 sales price 35,000 yen KRK powered speaker equipped with a Class D power amplifier. The amplifier section is equipped with an equalizer to help adjust room acoustics (Sasaki Shota)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: power cable, original box
Main specifications: 2-way 145 W playback frequency band 42 Hz to 40 kHz input balance, standard jack W225 x H339 x D284 mm 7.6 kg
※The spikes are out of stock, so it's cheap. A perfectly sized round top plate is used for B&W's “805 Series”. This speaker stand is made of lightweight magnesium alloy with a high vibration absorption rate (Shota Sasaki)
Accessories: none
Main specifications: top plate W226 x D304 mm bottom plate W238 x D317 mm height 600 mm weight 14 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
B&W bookshelf sized speakers It is equipped with a Nautilus tube and Kevlar cone unit from the higher series. This size is sufficient for clean mid to high ranges and low frequencies without any habit. It goes well with modern sauces. The jumper plate is dull, and there is a small scratch on the upper corner (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: instruction manual
Main specifications: 2 way 16.5 cm woofer 8 ohm bi-wiring connection possible W204 x H356 x D244 mm 6.1 kg
Granite speaker stand by Ishizo Unkei. It has been mirrored and has a careful finish. It contributes to damping the vibration and tightening of the sound of small speakers (Ryo Mizusaki)
Accessories: none
Main specifications: top plate W160 x D220 mm bottom surface W220 x D270 mm height 605 mm weight 17.3 kg
※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. It is an attractive amplifier with a maximum output of 100W during 4-channel operation, and the strength unique to commercial use. There is a feeling of use such as scratches and dullness on the exterior as a whole (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W x 4 (8 Ω continuous output) 100 W x 4 (4 Ω continuous output) 200 W (BTL 8 Ω continuous output) W480 x H88 x D417 mm weight 12.5 kg
※ The stylus is a genuine SHURE VN35HE. The lock on the needle cover doesn't work, so it's cheap. Good needle tip! It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
DL-103 limited model. “Class 1” LC-OFC wire, which boasts the highest grade of copper, is used for the power generation coil, and the body is made of a special ceramic fiber-reinforced resin with high rigidity, enhancing the purity of traditional monitor sounds. It has an even greater sense of range, and playback with excellent separation at high speed is possible (Murakoshi Yoichi)
Maintenance information: 2024.5.11 sound output confirmed
Accessories: needle cover
Main specifications: MC type 0.25 mV needle pressure 2.2 to 2.8 g Class 1 LC-OFC adopted
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
The price has been reduced! 2024/4/27 sales price 39,800 yen*Inexpensive due to cigarette smell, remote control shortage, etc. Maintained. AX-501-SP is a special packaged version model compatible with AX-501 banana plugs. A premain amplifier with a fully balanced configuration and a high-output Class-D amplifier, and equipped with an XLR balanced input. With fully balanced transmission and ABLETEC Class D amplifiers, you can enjoy clear and supple sound quality. The mechanical design with an eye-catching classical analog meter is also excellent. There are scratches and scratches on the exterior. Serial 0020331 (Yonejima Satoshi)
Maintenance information: 2024.4.27 Maintained (knob/button repair (rework)) has been performed. (In addition to the above, each part is cleaned, inspected, and adjusted)
Accessories: power cable
Main specifications: maximum output 88W+88W (4Ω, 1kHz, JEITA) 55W+55W (8Ω, 1kHz, JEITA) rated output 70W+70W (4Ω, 1kHz, JEITA) 45W+45W (8Ω, 1kHz, JEITA) W290 × H81.2 × D264 mm weight 4.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
The CD mechanism has been replaced at Denon! Denon design series CD player. It is equipped with an inexpensive yet highly accurate D/A converter that is compatible with MP3 and WMA files. Since it can also be used vertically, it is attractive that it is easy to adjust where it is placed. The exterior is dull and has small scratches. Serial ADR 27190603014 (Tamura Eiji)
Maintenance information: 2024.5.16 manufacturer maintained
Accessories: remote control, power cable
Main specifications: analog output x 1, coaxial digital output x 1 size W200 x H86 x D 240 mm, weight 2.4 kg
Hamilex compact 4-tier rack. The design is simple and you won't get tired of it. The shelves can also be adjusted, making it easy to use. There are bats and scratches on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Top plate load capacity: 100 kg or less Shelf board load capacity 50 kg or less Bottom plate load capacity 100 kg or less Total load capacity 250 kg W591 x H735 x D550 mm Weight 31.5 kg
※Since there is no manufacturer, it will be handed over as is. PSE standard product. Once the AC power source is converted to DC, a new 60 Hz sine wave is created using the built-in transmitter to generate a clean power source. The output power is 100W. Recommended for use with low power devices such as preamps, CD players, analog players, etc. Comes with an earth polarity switching function. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: original box
Main specifications: output power 100W output frequency 60Hz dimensions W221 x H145 x D415 mm weight 12 kg
The price has been reduced! 2024/5/9 sales price 39,800 yen D/A converter with a built-in “ES9038PRO.” This model has a compact design, is compatible with MQA, high-resolution, and DSD sound sources, and has excellent cost performance. Desktops etc. are the worst. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, AC adapter
Main Specifications: Input: USB/OPTICAL/COAXIAL/BLUETOOTH USB: 44.1 to 768 kHz/DSD64 to 512 OPTICAL/COAXIAL: 32 to 192 khz W100 x H62 x D192 mm Weight 0.58 kg
The price has been reduced. 2023/7/31 sales price 55,000 yen unopened, unassembled item! The Fostex 20cm double woofer enclosure D-70 is a plywood cut service for readers who assemble speakers designed by Mr. Tetsuo Nagaoka, which was published in stereo magazines at the time, and this is not a genuine assembly kit. There is no difference in dimensions or material. Wiring, SP terminals, detailed instructions, etc. are not included. If you can understand it, and if you are a self-made person, how about DIY this summer!? *The FE208 series with a round frame cannot be attached, and only the FE206 series with a square frame can be used. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: box
Key Specifications:20cm Backload Enclosure for Double Woofers
Box A W1040 x H120 x D490 mm weight 24.9 kg box B W980 x H100 x D595 mm weight 21.9 kg total weight approx. 93.6 kg
ADK 4-tier rack. Of course, other rack units can be stacked and used. Depending on the size of the device, you can change the rack to your liking. There is a feeling of use due to appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: 4 hole caps
Main specifications: upper stage and middle height 170 mm, lower stage height 250 mm W574 x H730 x D497 mm
The price has been drastically reduced! 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (check capacitors, resistors, transistors, etc. as is OK. bias check)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
Maintained by the manufacturer! A pre main amplifier with excellent cost performance. Even though it's an entry class. It has a thick, well-balanced sound and sounds well. It is one that makes you feel particular about functionality, such as having a pre-out terminal and being compatible with bi-amplifiers. The exterior is scratched and dull, and has a slight tobacco smell. Serial 9111550397 (Yamato Yuki)
Maintenance information: 2024.5.17 maintained (SP relay replacement amplifier board inspection loudness, source direct SW rework sound test)
Accessories: Power cable, copy of instruction manual ※ remote control missing
Main specifications: rated output 70W+70W (8Ω) 140W+140W (4Ω) playback frequency band 5Hz to 100kHz W434 x H134 x D407 mm 14.6 kg
The price has been reduced. 2024/5/10 sales price 42,800 yen This 2-way bookshelf with monitor audio will be introduced for the first time at Hi-Fi. The C-CAM unit introduced in the Bronze Series pursues sound quality. The high cost performance and sound typical of the company are attractive (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: instruction manual, saran net, bass reflex sponge, jumper, rubber feet, original box
Key Specifications: 2 Way 8Ω 85dB Crossover 2,500Hz W166 × H281 × D268 mm 5.0 kg
※The veneer is peeling, the top plate is undulating, and the grill is indented, so it is inexpensive. This high CP model was released in the 49th year of Diatone's founding. It has a very well-balanced, rounded, and gentle tone. I can do everything from jazz and rock to classical and pop music as an all-rounder (Oikawa Tetsuji)
Maintenance information: 2024.4.15 Operation confirmed
Accessories: none
Main specifications: 3 way 3 speakers, 6.3 ohms, sound pressure level, 90 dB, W380 x H680 x D295 mm, weight 25 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (LED installation (original not available) poor power stage transistor deterioration, defective transistor in the board → replacement. Bias adjustment, operation check.)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg