Unit magnetic circuit gap cleaning center adjustment, full maintenance from network maintenance to exterior has been completed. TANNOY monitor machine SRM-12X! It is a versatile speaker with excellent phase characteristics, and only speakers belonging to the monitor system have good sound separation, and you can feel a different flavor from ARDEN etc. It is large enough to make a pleasant sound for domestic houses. It has been cleaned up due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2026.5.26 Maintained (exterior repair/polishing/oil finish rear baffle/hakama repair/painting unit maintenance: magnetic circuit gap cleaning/center adjustment for both low and high frequencies
Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning unit assembly, saran badge cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type, coaxial type (3149), frequency characteristics, 50 Hz to 20 kHz, impedance 8 ohms (5.5 ohms minimum), crossover frequency 1.4 kHz, W446 x H850 x D279 mm, 30 kg
2.5-weight dollboy speaker with fine audio A point source driver design with determined broad directional characteristics called ISOFLERE is adopted. The bass reflex port and equalizer on the bottom of the main unit achieve a natural and rich sound. There is a tear in the corner of the saran net, but the main body is generally clean. Serial F80000110211007501343 (Fujisawa Yukishi)
Maintenance information: 2026.5.26 Operation confirmed
Accessories: saran net, jumper plates, spikes
Main specifications: 2.5-way base track type crossover 250 Hz/1.7 kHz impedance 8 ohm sensitivity 91 dB recommended amplifier output: 40 to 180 W frequency characteristics 30 Hz to 34 kHz W250 x H1114 x D380 mm weight 25.2 kg
Comes with a certificate! The 0.5 m pair XLR terminals on the balance cable have CG XLR specifications. A successor model that further enhances the degree of perfection of GOLD REFERENCE. This cable is suitable as a reference cable for high-end systems, with a balance between sound transparency and a high sense of scale. There is dullness on the plug. (FUJISAWA KOSHI)
Maintenance information: 2026.5.26 continuity confirmed
Accessories: certificate
Comes with a certificate! The 0.5 m pair XLR terminals on the balance cable have CG XLR specifications. A successor model that further enhances the degree of perfection of GOLD REFERENCE. This cable is suitable as a reference cable for high-end systems, with a balance between sound transparency and a high sense of scale. There is dullness on the plug. (FUJISAWA KOSHI)
Maintenance information: 2026.5.26 continuity confirmed
Accessories: certificate
It is a model that has undergone significant improvements to the 1.0 m Sarum Digital digital XLR cable. Tuned ARAY's new conductor configuration takes performance to an unprecedented level. (FUJISAWA KOSHI)
Maintenance information: 2026.5.26 continuity confirmed
Accessories: No accessories
Fidelity-Research's popular tone arm The basic structure is the same as the FR-64S, but the main structural parts are made of brass, and the arm pipes are made of aluminum alloy. Recommended for those who prefer high needle pressure cartridges, such as orthophone SPU users. The phono cable is missing, and the cushion on the top of the arm lifter is also missing (Oikawa Tetsuji)
Maintenance information: 2026.5.26 continuity confirmed
Accessories: original box, tools
Main specifications: Dynamic balance type, total length: 32 mm, execution length: 245 mm, needle pressure range: 0 to 5 g, 0.5 g, step compatible cartridge, 11 to 32 g, arm height adjustment: 27 to 60 mm, cartridge dead weight: 0 to 14.5 g (when using a dedicated shell)
Maintained! The model that started the KENWOOD brand. A pre-main amplifier with strong driving power and transparency due to thorough non-magnetization and a separate power supply unit. It has a firm sense of stability and plays a clean, clear sound. The unique design is also highly popular. Serial 01010182 (Fujisawa Yukishi)
Maintenance information: 2026.5.25 maintained (replacement with volume replacement, replacement of OUTPUT switch, adhesive fixation due to cracking on back, replacement of other speaker relay deterioration, replacement of 6 small INPUT relays, replacement of 4 broken display lamps, replacement of 4 semi-fixed VR locations for BIAS adjustment, other loudness SW, RECOUTSW decomposition, polishing, cleaning grease application, 7 other capacitors, etc. DC balance bias adjustments, each (Check the input/output terminal sound output, clean the input/output RCA terminal.)
Accessories: No accessories
Main specifications: rated output 100W+100W (8Ω) main unit W440 × H156 × D452 mm 9.5 kg power supply unit W170 × H156 × D403 mm 17.5 kg
Dust cover hingeless design. A classic record player that Technics is proud of. It has a design that assumes functionality in the field and has outstanding durability. It is recommended as an introductory model and as a secondary unit. There is a scratch on the rear (Daiki Goto)
Maintenance information: 2026.5.26 Operation confirmed
Accessories: original box, sticker
Main specifications: Direct drive, quartz lock, 33/45 rotation, pitch control, 8% pitch control, reset button, needle pressure adjustment: 0 to 4.0 g, W453 x H162 x D360 mm, 12 kg
Dust cover hingeless design. A classic record player that Technics is proud of. It has a design that assumes functionality in the field and has outstanding durability. Recommended as an introductory model and as a secondary unit (Daiki Goto)
Maintenance information: 2026.5.26 Operation confirmed
Accessories: original box, sticker
Main specifications: Direct drive, quartz lock, 33/45 rotation, pitch control, 8% pitch control, reset button, needle pressure adjustment: 0 to 4.0 g, W453 x H162 x D360 mm, 12 kg
A popular SME classic headshell with a stylish design. It is an essential item for light needle pressure arms and heavy cartridges (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
※Inexpensive due to room odor. 606S2 anniversary edition. This is the 7th generation stand-mount speaker in the 600 series. Advanced continuity cones and improved crossovers have been fused to acquire deeper musical reproducibility (Murakoshi Yoichi)
Maintenance information: 2026.5.26 sound output confirmed
Accessories: instruction manual, saran net, jumper
Main specifications: 2 way 2 speaker output sound pressure level 88dB impedance 8Ω playback frequency band 40Hz to 33kHz W190 x H345 x D300 mm weight 6.9 kg
Marantz network receiver. It is a model with a network player function attached to the premain amplifier, and you can enjoy music by various methods such as connecting not only CDs and record players but also Bluetooth, NAS, etc., and streaming. The signal-to-noise ratio and highly transparent spatial expression are attractive. The display is slightly dim. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Maintenance information: 2026.5.26 sound output confirmed
Accessories: remote control, instruction manual, AM, FM antenna, power cord
Main specifications: rated output 75W+75W (8Ω) DSD5.6MHz/PCM192 kHz compatible audio input terminals/analog x 3, Phono (MM) x 1, optical digital x 1, coaxial digital x 1, other terminal/network x 1, USB (front) x 1, Bluetooth/Wi-Fi antenna input x 2 FM antenna input x 1 AM antenna input x 1 Marantz remote bus (RC-5) input/output x 1 IR flasher Input x 1 wireless LAN/IEEE 802.11 a/b/g/n compliant (Wi-Fi® compliant) /2.4 GHz, 5 GHz Bluetooth/version 4.1 compatible profile A2DP1.2, AVRCP1.5 compatible codec SBC transmission output/communication distance Class1/approx. 30 m (line of sight) W440 x H105 x D378 mm 7.9 kg
An analog FM tuner that uses a triple air conditioner from the first Midnight Blue Series. From its small size, it reproduces reliable sound quality with a sense of reality. The sophisticated design is also attractive. The exterior is dull and has a feeling of use. Serial 189246 (Murakoshi Yoichi)
Maintenance information: 2026.5.26 sound output confirmed
Accessories: power cord
Main specifications: FM tuner reception frequency/76 to 90 MHz antenna input/unbalanced 75Ω (F connector) x 1, balanced 300Ω (terminal block) x 1 W123 x H96 x D206 mm 1.7 kg
TAOC speaker stand Cast iron is encapsulated inside the cylindrical struts to achieve sound balance and a natural rise. There are scuffs on the spike holder and paint has fallen off. (MURAKOSHI Yoichi)
Accessories: instruction manual, wrench, spike holder, manufacturer logo seal
Main specifications: top plate W190 x D270 mm W250 x H500 x D300 mm weight 10 kg
The needle tip is the original VN35HE! It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Murakoshi Yoichi)
Maintenance information: 2026.5.22 sound output confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV internal impedance 47 kΩ needle pressure 0.75 g to 1.25 g dead weight 6 g
Speaker cable, 1.9 m pair, model using 4 types of wire, mainly unprocessed high-purity 6N copper. It is a cable that can be used flexibly regardless of genre. One side is about 5 cm long (Murakoshi Yoichi)
Maintenance information: 2026.5.26 continuity confirmed
Accessories: none
A stylus cleaner that vibrates electrically and makes it easy to clean the needle tip of the cartridge. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2026.1.24 Operation confirmed
Accessories: original box, cover
Main specifications: Weight 40g (battery not included)
※It has been replaced with a chamois edge. A speaker system incorporating the popular Diatone P-610A, nicknamed “Rokuhan,” into a self-made enclosure. You can listen to it with plenty of volume in a large, loud box. There is repair on corn paper (Murakoshi Yoichi)
Maintenance information: 2026.5.26 sound output confirmed
Accessories: none
Main Specifications: P-610A: Single Cone Type Full Range Foam Urethane Edge Alnico Caliber 16 cm 16 Ω Playback Frequency Band 80 Hz to 13,000 Hz W325 x H638 x D400 mm 12.5 kg
※The needle cover is missing, and the cantilever is slightly to the right. This is a NAGAOKA cartridge. Equipped with a moving permalloy (MP) power generator, this cartridge has high cost performance. It has a stretchy tone and high density, and I recommend pop and jazz (Murakoshi Yoichi)
Maintenance information: 2026.5.22 sound output confirmed
Accessories: none
Main specifications: MP type output 5 mV frequency band 20 Hz to 20,000 Hz needle pressure 2.3 g dead weight 6 g (actual measurement)
Vintage record cleaner made by American Discwasher. The handle part is made of natural walnut wood, so the taste will increase as you use it. ※ It is designed to store the cleaner liquid in the hole on the side, but it is out of stock. *This is for cleaner and stylus brush only. The condition is damaged over time, dullness, etc. and there is a feeling of use (Yamato Yuki)
Accessories: original box stylus brush
An Italian M2Tech EVO series D/A converter packed with various functions in a minimal size. Please step up the current state of PC audio. Serial ED-0238 (Tomonori Asaine)
Maintenance information: 2026.5.26 Sound output operation confirmed ※I2S has not been confirmed
Accessories: AC adapter
Main specifications: sampling frequency/44.1, 48, 88.2, 96, 176.4, 192 kHz bits/SPDIF maximum 24 bit, I2S maximum 32 bit input/I2S (RJ45, HiFace Evo compatible), S/PDIF (coaxial, square, optical) output/single-ended line level (RCA) W105 x H46 x D104 mm weight approx. 350 g
※I cleaned it, but the smell of tobacco remains, so it's cheap. Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions W300 x H45 x D125 mm, weight approx. 540 g
Only the 1.9 m 1 speaker cable has an unprocessed twist specification, making it less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Maintenance information: 2026.5.26 continuity confirmed
Accessories: none
Copper/air core L coil pair air core coil designed for speaker networks. It is popular as a standard part for self-made networks, and the solid construction typical of FOSTEX is also attractive. (ASAINE Tomonori)
Accessories: original box
Main specifications: inductance 1.0 mH
Copper/air core L coil pair air core coil designed for speaker networks. It is popular as a standard part for self-made networks, and the solid construction typical of FOSTEX is also attractive. (ASAINE Tomonori)
Accessories: original box
Main specifications: inductance 1.8 mH
Copper/air core L coil pair air core coil designed for speaker networks. It is popular as a standard part for self-made networks, and the solid construction typical of FOSTEX is also attractive. (ASAINE Tomonori)
Accessories: none
Main specifications: inductance 0.5 mH
Copper/air core L coil pair air core coil designed for speaker networks. It is popular as a standard part for self-made networks, and the solid construction typical of FOSTEX is also attractive. (ASAINE Tomonori)
Accessories: original box
Main specifications: inductance 1.5 mH
Copper/air core L coil pair air core coil designed for speaker networks. It is popular as a standard part for self-made networks, and the solid construction typical of FOSTEX is also attractive. (ASAINE Tomonori)
Accessories: original box
Main specifications: inductance 3.5 mH
Copper/air core L coil pair air core coil designed for speaker networks. It is popular as a standard part for self-made networks, and the solid construction typical of FOSTEX is also attractive. (ASAINE Tomonori)
Accessories: original box
Main specifications: inductance 2.2 mH