The disposal price has been reduced! Member prices are not applicable. 2024/4/25 sales price 1,280,000 yen An analog player produced by SME, a prestigious tonearm company. Vibrations are suppressed with a unique isolation system and high-quality aluminum, and stable sound reproduction is achieved with an elaborate set of parts unique to SME. The arm is equipped with a specially designed 309, so you can enjoy rich and stable analog sound. Serial 0105 (Tamura Eiji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: instruction manual, connection cable, power cable, stabilizer, tool, original box
Main specifications: Compatible speed: 33, 45, 78 rpm Main unit: W370 x H170 x D350 mm Power supply unit: W170 x H68 x D305 mm Weight: 25.9 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/25 sales price 998,000 yen SME's current record player has arrived! Similar to the “Model 12A,” it uses a new-generation advanced electronic speed control unit, and detailed speed control is possible. The arm is equipped with the “M2-9R,” which can be said to be the successor to the “3009,” and is compatible with a wide range of cartridges. Please enjoy the one that represents this class. Serial 0075 (Tamura Eiji)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: instruction manual (English), belt, power cable, connection cable, original box, IFC weight, stabilizer, head shell
Main specifications: main unit: W420 x H90 x D320 mm Power supply unit: W220 x H85 x D200 mm Weight: 11.4 kg including power supply
The disposal price has been reduced! Member prices are not applicable. 2024/4/25 sales price 498,000 yen KLIMAX DSM/1 is a model created through a DSM/2 upgrade service. It is a car where you can fully enjoy the “KLIMAX” quality while keeping the simple structure typical of LINN. There are no noticeable scratches on the exterior. Serial 1427895 (Tamura Eiji)
Maintenance information: 2024.4.25 Maintained (removal of residual parts damaged in the output jack. RCA jack L R both replaced (made by WBT). Ver (4.104.518))
Accessories: power cable
Main Specifications: Support Files: FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA Compatible Sampling Frequency: 44.1 to 192 kHz Compatible Bits: 16-24 Bits W381 x H80 x D280 mm Weight 2.7 kg
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg
Maintained. This is the highest grade deck in the ES series, bearing the “7,” the final model of the Sony cassette deck. The overwhelming weight and stable operation with a strong body are suitable for a reference machine, and it is also easy to operate intuitively. The sound quality is also sharp, and it is a top level car that achieves both sound and operability. The exterior has line scratches, bumps, and threads. Serial 252215 (Tamura Eiji)
Maintenance information: 2024.4.30 maintained (mechanical drive belt replacement, capstan belt replacement, left pinch roller replacement, head base cleaning and grease up, pinch roller cleaning and grease up, mechanical shaft cleaning and grease up, capstan motor control part electrolytic capacitor replacement. Contact cleaning by detaching the tape half detection switch. Check the tape running path, adjust the left pinch roller height, and check and adjust the playhead azimuth angle. Recording level adjustment volume/BIAS level/EQ volume contact cleaning, Dolby switch contact cleaning, headphone volume replacement, print pattern status check, and additional soldering treatment. Playback level check adjustment, recording level check adjustment, bias level check adjustment, recording calibration operation check adjustment, recording playback test is good, Dolby recording and playback test is good, timer operation test is normal. *Reference value: W&F (WTD): 0.025%, blank residual noise level (-52 dB linear measurement))
Accessories: No accessories
Main specifications: 4 tracks, 2 channels, 3 heads, frequency characteristics, 15 Hz to 22 kHz, W430 x H135 x D380 mm, 12 kg
D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: power cable
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/24 sales price 118,000 yen*The saran net is cheap because it is not in good condition due to lack of stock, scratches, etc. ATC small bookshelf The thick and powerful mid-low range is attractive. If you pair it with a good amplifier that has torque, you can enjoy it on a scale that greatly exceeds its size. There are scratches on the exterior. Serial 0819/0820 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: No accessories
Main specifications: 2 way 2 speakers sealed impedance 8 ohms size W211 x H380 x D250 mm weight 11.4 kg
Maintained! This is the first AUDIO OF OREGON control amplifier to be in stock in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
The price has been drastically reduced! 2024/4/17 sales price 69,800 yen ※It is cheap because it has a tobacco smell. Hi-Fi Man's planar drive headphones have a high resolution, and the low frequencies are clear and easy to listen to. The sound balance is flat and the high cushioning is also impressive. The exterior smells like tobacco and there are creases on the cable (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box, connection cable
Main specifications: planar drive impedance 50 ohms sound pressure sensitivity 83.5 dB playback frequency band 8 Hz to 65 kHz 505 g
The price has been drastically reduced! 2024/4/13 sales price 69,800 yen ※It is cheap because it has a tobacco smell. It is a premain amplifier with a built-in USB DAC compatible with a maximum DSD of 11.2 MHz and PCM384 kHz/32 bit input. Adopts a dual monaural configuration/fully balanced circuit design that inherits the design philosophy of the UD-503. This one is enough, and it's a convenient dish. There are small scratches on the exterior. Serial 1710182 (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: remote control, power cable
Main specifications: 20W+20W (8Ω) impedance 4Ω to 8Ω frequency characteristics 10Hz to 100kHz W290 x J81.2 x D264 mm mass 3.7 kg
Screwdriver Transpair sale 1st order: 5 kΩ 2nd order: 5 kΩ CT/1.25 ksplit DC30mA 50 to 15 kHz output level 30dBm W76 × H83 × D44mm 0.7 kg (actual measurement, including protrusions) One side with original box seems to be an unused item due to the state of the terminal! (KOJIMA Yosuke)
Accessories: original box
※It is cheap because it is out of stock and is a spike replacement. A speaker stand that fits the top plate perfectly with JBL's signature speakers 4312, 4425, and 4428 series. Control the sound by filling the pillars with cast iron powder. The sound is like a control monitor with a sharp focus. The exterior has strokes and bruises (Tamura Eiji)
Accessories: spikes (replacement)
Main specifications: top plate W360 x D293 mm bottom plate W440 x H334 x D370 mm (actual measurement) weight 29 kg/bottle
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
The price has been reduced! 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A German stereo power amplifier with resolution and expressiveness not typical of commercial use. It is proud of its exhilarating sound and outstanding driving power that comes out quickly. The exterior has scratches and paint bald spots. Serial 2172380UGD01107 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 85W+85W (8Ω) 150W+150W (4Ω) W483 x H88 x D270 mm 11.5 kg
※Since it is cheap, it will be handed over as is. A coaxial 2-way speaker that can be enjoyed using sound reflected from the ceiling with a structure directed diagonally upward. You can enjoy playback with Dolby Atmos by adding enabled speakers as height channels based on conventional 5.1 channel and 7.1 channel speaker systems. It can also be used by installing it on a floor-standing speaker such as the company's D-509E. There are scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.4.24 sweep check OK
Accessories: saran net
Main specifications: sealed coaxial 2-way speaker 6 ohm 83.5dB 70Hz-38kHz W142 x H136.5 x D238.5 2.2 kg
※It has a cigarette smell, so it's cheap. Since it is 120V specification for commercial use, it will be handed over as is. A compact commercial power amplifier that is highly regarded as a professional studio monitor amplifier. The driving power that cannot be imagined from its size is truly the real thrill of a professional aircraft. The range is reasonable, but it is characterized by a sound image that does not lose sound even at high volumes. There are scratches on the exterior. Serial 8001337592 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 40W+40W (8Ω) W483 x H44.5 x D213 mm 4.5 kg
The price has been reduced! 2024/3/6 sales price 25,000 yen speaker cable 1.0 m pair banana on both ends uses the company's highest-grade cable material. Recommended for those who want to improve the tightness of the low frequencies. On the exterior, there is a part where the rubber ring on the terminal is off. ※The cable is stiff, so please be careful when routing (Tamura Eiji)
Maintenance information: 2024.3.6 continuity confirmed
Accessories: No accessories
※Since it is cheap, it will be handed over as is. An attractive subwoofer with a tight, speedy bass range based on time domain theory. The sound that emits 360 degrees is a convenient item with a high degree of freedom of installation. There are scratches on the exterior. Serial Z0C00005 (Tamura Eiji)
Maintenance information: 2024.4.24 sweep test good
Accessories: instruction manual, power cable, original box
Main specifications: 16 cm subwoofer 16 cm (dual voice coil unit) playback frequency band 40 Hz to 200 Hz rated output 30 W x 2 crossover 40 Hz to 200 Hz (continuously variable) power consumption 46 W size W236 x H354 x D301 mm mass 16.2 kg
*Currently sold. 120V specification. CROWN commercial power amplifier. It features driving power unique to professional use that lifts straight. The high braking power at high volume fully demonstrates the quality of a professional device. The exterior is dull. *There are no fixing brackets for mounting racks. Also, the AC plug has been replaced. Serial 8001294201 (Tamura Eiji)
Maintenance information: 2024.4.11 operation confirmed
Accessories: none
Main specifications: output 25W+25W (8Ω) 120V specification natural air cooling method W483 × H45 × D213 mm 4.5 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/7 sales price 25,000 yen*Exclusive earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. There are line scratches and tape marks on the exterior (Tamura Eiji)
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/7 sales price 25,000 yen*Exclusive earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. There are line scratches and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 2172380XCK00186 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
※It has a cigarette smell, so it's cheap. Currently sold. 115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are scratches on the exterior. Serial 217380XCK00185 (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: none
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
Digital cable 1.5m DENON LINK cable This is a dedicated cable that maximizes the performance of the high-purity copper high definition digital audio interface DENON LINK. Stable high quality digital transmission without being affected by the surrounding environment has been achieved by thoroughly eliminating vibrations from the plug and shield (Tamura Eiji)
Accessories: original box, instruction manual
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
※Since it is cheap, it will be handed over as is. 1 bottle only 25cm full range speaker made by RCA in the USA. The Alnico magnet responds well and the sound is easy to remove. There are repair marks on the edge (Tamura Eiji)
Maintenance information: 2024.3.22 sweep test good
Accessories: No accessories
Key Specifications: Unit Diameter 25cm 8Ω Fixed Edge
*Currently sold. Yamaha superwoofer equipped with a 20 cm x 2 double woofer. Equipped with active servo technology and a 150W high-power amplifier, it plays bass that is small yet full of volume. There is dirt, dirt and dullness on the exterior, and some floating on the bottom. Serial Z117079QS (Tamura Eiji)
Maintenance information: 2024.3.3 sweep test is good
Accessories: No accessories
Main specifications: used unit 20 cm cone type x 2 rated output 150 W (5 ohms) playback frequency band 20 Hz to 160 Hz high cut filter 40 Hz to 140 Hz, continuously variable W235 x H602 x D463 mm 20 kg
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has scratches, threads, and dullness. There is also a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
The price has been reduced! 2024/4/3 sales price 15,000 yen A rare 1,400Hz frequency board is in stock! It seems to be an Accuphase special order item. A crossover board that can be used for the F-5/F-15. The damping slope can be changed with an internal switch (Tamura Eiji)
Maintenance information: 2024.4.3 operation confirmed (can be checked with F-15)
Accessories: No accessories
Main specifications: 1400 Hz attenuation slope 12 dB/18 dB switchable
The price has been reduced! 2024/4/3 sales price 15,000 yen This is a crossover board crossover frequency of 300 Hz for the F-5/F-15. The damping slope can be changed with an internal switch (Tamura Eiji)
Maintenance information: 2024.4.3 operation confirmed (can be checked with F-15)
Accessories: original box
Main specifications: 300Hz attenuation slope 12dB/18dB switchable
Y lug plug set of 4 have mirror-polished terminal contact parts made of leadless brass material with excellent conductivity, and rhodium plating treatment has been applied to the surface to further improve conductivity and durability (Tamura Eiji)
Accessories: original box, instruction manual
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
※The unit has noticeable mold spots, so it is inexpensive. It is a model equipped with a sound diffuser that can adjust directivity characteristics to the listening position while maintaining the quality and ease of use of the 101 series. On the exterior, there are scratches and mold on the unit. Serial 006855/006856 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net, diffuser
Main specifications: 11.5cm full range anti-magnetic type maximum output 150W impedance 6Ω dimensions W232 × H154 × D162 mm weight 2.2 kg
The 1.8 m PSE standard MK2 power cable is not only flexible and easy to use, but the sound quality has also been brushed up with fewer habits. You can get clear, sharp sound. There is a frayed sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: none
The 1.8 m PSE standard MK2 power cable is not only flexible and easy to use, but the sound quality has also been brushed up with fewer habits. You can get clear, sharp sound. There is a frayed sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: none
Output transformer sold 1 piece Primary: 5 kΩ Secondary: 6 Ω/600 Ω NFB W68 × H91 × D72 mm 1.28 kg (actual measurement, not including protrusions). From specifications, it seems to be a line output transformer. There are rust spots, scratches, and paint peeling in places (Kojima Yosuke)
Accessories: none
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm